The endangered plant species Adenophora liliifolia faces threats to its survival in the wild, necessitating the development of effective micropropagation techniques for potential reintroduction efforts. This study demonstrates that Adenophora liliifolia effectively reproduces on MS synthetic medium with diverse plant growth regulators (PGR) and natural extracts, facilitating swift micropropagation for potential future reintroduction endeavors. It highlights the substantial impact of PGR composition and natural extracts on the growth and development of A. liliifolia. The ideal growth medium for A. liliifolia was determined to be ½ MS with specific treatments. Additionally, incorporating silver nitrate (AgNO3) at 5 mg L-1 into the medium led to enhanced root formation and shoot length, albeit excessive concentrations adversely affected root development. Varying concentrations of NAA significantly affected different plant growth parameters, with the 0.1 mg L-1 treatment yielding comparable plant height to the control. Moreover, 50 mL L-1 of coconut water bolstered root formation, while 200 mL L-1 increased shoot formation during in vitro propagation. However, elevated doses of coconut water (CW) impeded root development but stimulated shoot growth. Experiments measuring chlorophyll a + b and carotenoid content indicated higher concentrations in the control group than differing levels of applied coconut water. Optimizing pH levels from 6.8-7 to 7.8-8.0 notably enhanced plant height and root formation, with significant carotenoid accumulation observed at pH 6.8-7. Soil samples from A. liliifolia\'s natural habitat exhibited a pH of 6.65. Ultimately, the refined in vitro propagation protocol effectively propagated A. liliifolia, representing a pioneering effort and setting the stage for future restoration initiatives and conservation endeavors.

Agaves are plants with multiple possibilities of use and are naturally tolerant to low water availability conditions and high temperatures. This makes them species of great interest in the context of the necessary substitution of crops due to climate change. Unfortunately, the overexploitation of wild specimens has endangered many species of the genus that have not been domesticated or cultivated intensively. In vitro mass culture and propagation techniques have emerged as a very efficient option to produce agave plants that can be used without damage to the natural populations. A protocol is presented here for the in vitro micropropagation of agaves in a two-stage process. In the first step, clusters of slightly differentiated shoots are generated from stem segments cultivated on a semisolid medium added with cytokinin. In a second step, these shoot clusters are cultured in temporary immersion bioreactors where they grow and complete their differentiation, and then the shoots are rooted and transferred to soil. This protocol has been successfully applied to several threatened species of the Agave genus.

This chapter presents the methodological approach for the in vitro propagation of Agave angustifolia \"espadin,\" the base material to produce mezcal. The protocol used in each stage of the crop is addressed in detail, considering the changes in the culture medium and the characteristics of the plant material at each stage. The importance of integrated management between the multiplication and growth phase, as part of the in vitro selection strategy, is mentioned.

The method of plant micropropagation is widely used to obtain genetically homogeneous and infection-free plants for the needs of various industries and agriculture. Optimization of plant growth and development conditions plays a key role in economically successful micropropagation. Computer technologies have provided researchers with new approaches for modeling and a better understanding of the role of the factors involved in plant growth in vitro. To develop new models for optimizing growth conditions, we used plants with a high speed of vegetative in vitro reproduction, such as duckweed (Wolffia arrhiza and Lemna minor). Using the development of the optimal modeling of the biological processes, we have obtained the prescriptions for an individually balanced culture medium that enabled us to obtain 1.5-2.0 times more duckweed biomass with a 1.5 times higher protein concentration in the dry mass. Thus, we have demonstrated that the method of optimization modeling of the biological processes based on solving multinomial tasks from the series of quadratic equations can be used for the optimization of trophic needs of plants, specifically for micropropagation of duckweeds in vitro.

The success of in vitro cultivation, particularly for micropropagation purposes, depends on the efficient control of contaminants. In this context, the sterilization of plant material constitutes a fundamental step in initiating cultures. Microbial contaminants can be found either on the surface (epiphyte) or inside plant explants (endophyte). However, the latter is generally challenging to detect and may not always be eradicated through surface sterilization alone. Endophyte contaminants, such as bacteria, can persist within plant material over several cultivation cycles, potentially interfering with or inhibiting in vitro establishment, growth, or recovery of cryopreserved materials. Therefore, microscopy techniques, such as electron microscopy, can yield valuable insights into bacterial endophytes\' localization, tissue colonization patterns, and functions in in vitro plant culture. This information is essential for adopting effective strategies for eliminating, preventing, or harmonious coexistence with contaminants.

Temporary immersion systems (TIS) have been widely recognized as a promising technology for micropropagation of various plant species. The TIS provides a suitable environment for culture and allows intermittent contact of the explant with the culture medium at different immersion frequencies and aeration of the culture in each cycle. The frequency or immersion is one of the most critical parameters for the efficiency of these systems. The design, media volume, and container capacity substantially improve cultivation efficiency. Different TIS have been developed and successfully applied to micropropagation in various in vitro systems, such as sprout proliferation, microcuttings, and somatic embryos. TIS increases multiplication and conversion rates to plants and a better response during the ex vitro acclimatization phase. This article covers the use of different immersion systems and their applications in plant biotechnology, particularly in plant tissue culture, as well as its use in the massive propagation of plants of agroeconomic interest.

Plant cell, tissue, and organ cultures (PCTOC) have been used as experimental systems in basic research, allowing gene function demonstration through gene overexpression or repression and investigating the processes involved in embryogenesis and organogenesis or those related to the potential production of secondary metabolites, among others. On the other hand, PCTOC has also been applied at the commercial level for the vegetative multiplication (micropropagation) of diverse plant species, mainly ornamentals but also horticultural crops such as potato or fruit and tree species, and to produce high-quality disease-free plants. Moreover, PCTOC protocols are important auxiliary systems in crop breeding crops to generate pure lines (homozygous) to produce hybrids for the obtention of polyploid plants with higher yields or better performance. PCTOC has been utilized to preserve and conserve the germplasm of different crops or threatened species. Plant genetic improvement through genetic engineering and genome editing has been only possible thanks to the establishment of efficient in vitro plant regeneration protocols. Different companies currently focus on commercializing plant secondary metabolites with interesting biological activities using in vitro PCTOC. The impact of omics on PCTOC is discussed.

Plant tissue culture has evolved in the last decades with several types of cultures being developed to promote a more sustainable food production system. Moreover, these cultures can be applied for the production of relevant metabolites with medicinal potential, thus contributing to nutrition and healthcare. Importantly, plant micropropagation has enabled agricultural expansion and tissue culture has emerged as a promising production alternative for several plants and their metabolites in the food, cosmetic, and pharmaceutical industries. Plant tissue cultures present several advantages over conventional propagation techniques as they are season independent, enabling a continuous supply of the plants/compounds of interest, with the guarantee of high phytosanitary quality. In addition, genetic uniformity is generally maintained, thus reducing chemical variability that can compromise safety and efficacy. Nevertheless, despite their undeniable potential, with many researchers focusing on new strategies to improve production yield in cell cultures, such as with the use of elicitors or resorting to metabolomics engineering, an effective and lucrative large-scale production has yet to be obtained. Indeed, only a few compounds with market value are produced in this regard and several limitations such as contaminations, low culture yield and production costs still need to be overcome in order to take advantage of the full potential of these techniques.

Worldwide, oak species are threatened with extinction due to habitat loss, pathogens, and changing fire regimes. Ex situ conservation through tissue culture may protect the remaining genetic diversity of Quercus dumosa, or the coastal sage scrub oak, from further loss. We designed three basal salt formulations based on the mineral composition of shoot tips and first leaves from mature Q. dumosa and explored carbohydrate source, stress-mitigating compounds, and plant growth regulator concentrations to develop a method of cultivating many Q. dumosa culture lines in vitro. All three novel basal salt formulations led to decreased necrosis compared with commercial basal salt formulas WPM, MS, and DKW. Substitution of 30 g L-1 sucrose with glucose and adding 250 mg L-1 ascorbic acid, 5.2 mg L-1 SNP sodium nitroprusside, and 103 mg L-1 y-aminobutyric acid improved culture health overall. In an experiment involving 115 culture lines, 0.66 mg L-1 6-benzylaminopurine produced the highest average shoots per explant, but 0.33 mg L-1 produced the greatest proportion of shoots 2 cm or greater. Incubation for 24 h in 20 mg L-1 indole-3-butyric acid led to the most rooting. These methods show promise for the ex situ conservation of many genotypes of endangered Q. dumosa.

This paper focuses on the creation of an in vitro collection of grapevine hybrids from the breeding program of the Kazakh Scientific Research Institute of Fruit Growing and Viticulture and investigates the presence of Plasmopara viticola resistance mediated by Rpv3 and Rpv12 loci. We looked at the optimization of in vitro establishment using either shoots taken directly from field-grown plants or from budwood cuttings forced indoors. We further screened for the presence of endophyte contamination in the initiated explants and optimized the multiplication stage. Finally, the presence of the resistance loci against P. viticola was studied. The shoots initiated from the field-sourced explants were the more effective method of providing plant sources for in vitro initiation once all plant accessions met the goal of in vitro establishment. The concentration of phytohormones and the acidity of the culture medium have a great effect on the multiplication rate and the quality of in vitro stock cultures. Out of 17 grapevine accessions, 16 showed the presence of single or combined resistance loci against P. viticola. The grapevine accessions identified as carrying Rpv3 and Rpv12 alleles represent important genetic resources for disease resistance breeding programs. These accessions may further contribute to the creation of new elite cultivars of economic interest.