OBJECTIVE: To investigate whether 6-shogaol (6-SH) alleviates oxygen-glucose deprivation/reoxygenation (OGD/R)-induced neuronal autophagy and calcium overload by promoting the expression of microRNA-26a-5p (miR-26a-5p) and inhibiting death-associated protein kinase 1 (DAPK1), and to explore its potential mechanisms.
METHODS: Primary cultured logarithmic growth phase mouse hippocampal neurons HT22 cells were taken and cell counting kit-8 (CCK-8) was used to detect cell viability, searching for the optimal concentration of Na2S2O4. HT22 cells were divided into blank control group (NC group), OGD/R group (sugar-free culture medium + 10 mmol/L Na2S2O4 treatment for 1.5 hours followed by normal culture medium for 4 hours), 6-SH intervention group (cultured with 10 μmol/L 6-SH for 4 hours after OGD), negative control inhibitor pretreatment group (transfected with negative control inhibitor for 48 hours followed by OGD, then cultured with 6-SH for 4 hours), and miR-26a-5p inhibitor pretreatment group (transfected with miR-26a-5p inhibitor for 48 hours followed by OGD, then cultured with 6-SH for 4 hours). Cell viability of each group was detected by CCK-8 method; cell ultrastructure was observed under transmission electron microscopy; real-time quantitative polymerase chain reaction (RT-qPCR) was used to detect the gene expressions of DAPK1 and miR-26a-5p; molecular docking were used to verify the interaction between 6-SH and miR-26a-5p; dual-luciferase assay was used to verify the targeting relationship between DAPK1 and miR-26a-5p; flow cytometry was used to determine the levels of intracellular Ca2+; Western blotting was used to detect the protein expressions of phosphorylated-glutamate receptor 2B (p-NMDAR2B) Ser1303, DAPK1, autophagy related protein Beclin1, light chain 3 (LC3), and p-DAPK1 Ser308; immunofluorescence was used to detect the expression of LC3 and Beclin1.
RESULTS: The results of the CCK-8 assay showed that the cell viability of the 6-SH intervention group was significantly increased compared to the OGD/R group, while the cell viability of the miR-26a-5p inhibitor pretreatment group was significantly decreased compared to the 6-SH intervention group. Transmission electron microscopy revealed that the number of autophagosomes in the 6-SH intervention group was significantly reduced compared to the OGD/R group, while the number of autophagosomes in the miR-26a-5p inhibitor pretreatment group was significantly increased compared to the 6-SH intervention group. RT-qPCR results showed that compared with the OGD/R group, the expression of miR-26a-5p was significantly upregulated and the expression of DAPK1 mRNA was significantly downregulated in the 6-SH intervention group; compared with the 6-SH intervention group, the expression of miR-26a-5p was significantly downregulated and the expression of DAPK1 mRNA was significantly upregulated in the miR-26a-5p inhibitor pretreatment group. Molecular docking verified the interaction between 6-SH and miR-26a-5p. Dual-luciferase reporter gene assay showed that compared with the negative control group, mmu-miR-26a-5p significantly downregulated the luciferase expression of m-DAPK1-3UTR-WT, indicating a binding interaction between them. Flow cytometry results showed that compared with the OGD/R group, the level of intracellular Ca2+; was significantly decreased in the 6-SH intervention group; compared with the 6-SH intervention group, the level of Ca2+ was significantly increased in the miR-26a-5p inhibitor pretreatment group. Western blotting results showed that compared with the OGD/R group, the protein expressions of p-NMDAR2B Ser1303, DAPK1, Beclin1, and LC3 were significantly decreased in the 6-SH intervention group (p-NMDAR2B Ser1303/β-actin: 2.34±0.27 vs. 4.78±0.39, DAPK1/β-actin: 1.40±0.13 vs. 2.37±0.21, Beclin1/β-actin: 2.61±0.32 vs. 4.32±0.29, LC3/β-actin: 2.52±0.45 vs. 5.09±0.18, all P < 0.05), while the protein expression of p-DAPK1 Ser308 was significantly increased (p-DAPK1 Ser308/β-actin: 0.66±0.09 vs. 0.40±0.02, P < 0.05); compared with the 6-SH intervention group, the protein expressions of p-NMDAR2B Ser1303, DAPK1, Beclin1, and LC3 were significantly increased in the miR-26a-5p inhibitor pretreatment group (p-NMDAR2B Ser1303/β-actin: 4.08±0.14 vs. 2.34±0.27, DAPK1/β-actin: 1.96±0.15 vs. 1.40±0.13, Beclin1/β-actin: 3.92±0.31 vs. 2.61±0.32, LC3/β-actin: 4.33±0.33 vs. 2.52±0.45, all P < 0.05), while the expression of p-DAPK1 Ser308 protein was significantly decreased (p-DAPK1 Ser308/β-actin: 0.33±0.12 vs. 0.66±0.09, P < 0.05); immunofluorescence staining showed that compared with the OGD/R group, the fluorescence intensity of LC3 and Beclin1 was significantly decreased in the 6-SH intervention group; compared with the 6-SH intervention group, the fluorescence intensity of LC3 and Beclin1 was significantly increased in the miR-26a-5p inhibitor pretreatment group.
CONCLUSIONS: 6-SH can alleviate neuronal damage by regulating miR-26a-5p/DAPK1 to reduce autophagy and calcium overload in cells.

Herein, we have reported a red-emitting 4-methyl coumarin fused barbituric acid azo dye (4-MCBA) synthesized by conventional method. Density functional theory (DFT) studies of tautomer compounds were done using (B3LYP) with a basis set of 6-31G(d,p). NLO analysis has shown that tautomer has mean first-order hyperpolarisabilities (β) value of 1.8188 × 10-30 esu and 1.0470 × 10-30 esu for azo and hydrazone forms, respectively, which is approximately nine and five times greater than the magnitude of urea. 4-MCBA exhibited two absorption peaks in the range of 290-317 and 379-394 nm, and emission spectra were observed at 536 nm. CV study demonstrated that the modified 4-MCBA/MGC electrode exhibited excellent electrochemical sensitivity towards the detection of catechol and the detection limit is 9.39 μM under optimum conditions. The 4-MCBA employed as a fluorescent probe for the visualisation of LFPs on various surfaces exhibited Level-I to level-II LFPs, with low background interference.

Cigarette butts (CBs) are small residues with mixed composition. Produced in large amounts, their accumulation in the environment has become alarming. It is possible to classify more than 7000 chemical components generated either in the burning process or when distilled from the tobacco. The aim of this work was to describe the rate of release of phenolic compounds from CBs, to determine the content of these compounds in freshly smoked CBs and to monitor the release of phenols from CBs into fresh natural waters. The kinetics of release of selected phenolic compounds (hydroquinone, resorcinol, pyrocatechol, phenol, guaiacol, o-cresol, m-cresol, p-cresol) into water was monitored for 48 h. More than 90% of the content was extracted within 10 h for all analytes. The phenolic content was determined in the CBs of five different brands. The total content of phenols determined for each sample of freshly smoked CB was 215-861 µg/CB. For all CBs analysed, phenol, pyrocatechol and hydroquinone were the most abundant analytes, accounting for up to 75% of the content of all phenols determined. Phenol was the most abundant analyte (64.6-267.8 µg/CB) in all analysed samples. The content of pyrocatechol, the second most abundant analyte, was 45.6-221.2 µg/CB and the third most abundant analyte was hydroquinone (41.71-157.5 µg/CB). Monitoring the release of phenols from CBs into fresh natural waters (river, stream, pond) under steady and slight moving conditions showed that the kinetics of release is not influenced by the type of water. On the contrary, the process of decomposition of the released compounds is influenced by the type of water. The maximum concentrations of individual phenols in CBs extracts were comparable to those determined via laboratory extraction, thus indicating that within 72 h, most of the phenolic compounds are released from CBs into natural water. This research provides missing information on the phenolic content in CBs and the rate of release into water. It thus complements previously published information on CBs as a source of environmental contamination.

The mucosal barrier and scavenging effect of the mucosal layer are two main obstacles in inducing mucosal immunization. To overcome these obstacles, we synthesized a bio-inspired mucoadhesive material, chitosan-catechol (ChiC), for surface modification of inactive porcine epidemic diarrhea virus (PEDV). Studies have revealed that PEDV particles can be facilely and mildly modified by Chi-C forming Chi-C-PEDV nanoparticles (Chic-Ps) through the covalent and electrostatic bond, which effectively prolongs the retention time of PEDV in the nasal mucosa. The cell co-culture model demonstrated that Chic-Ps exhibit enhanced recruitment of dendritic cells via the secretion of stimulating chemokine CCL20 and improving antigen permeability by disruption the distribution of ZO-1 protein in epithelial cells. Additionally, the flow cytometry (FCM) analysis revealed that Chic-Ps facilitate trafficking to lymph nodes and induce stronger cellular and humoral immune responses compared to unmodified PEDV. Notably, Chic-Ps induced a higher level of PEDV neutralizing antibody was induced by Chic-Ps in the nasal washes, as confirmed by a plaque reduction neutralization test. These results demonstrate that Chi-C is a promising nasal delivery system for vaccines. Proof of principle was obtained for inactivated PEDV, but similar delivery mechanisms could be applied in other vaccines when intranasal administration is needed.

Superior multifunctional hydrogel dressings are of considerable interest in wound healing. In clinical practice, it is useful to investigate hydrogel dressings that offer multifunctional benefits to expedite the process of wound healing. In this study, Catechol-grafted Chitosan, Gelatin, and Fe3+ as substrates to construct a hydrogel network. The network was dynamically cross-linked to form Ccg@Fe hydrogel substrate. Fe3O4 nanoparticles and baicalin, which possess antimicrobial and anti-inflammatory properties, were loaded onto the substrate to form a photothermal antibacterial composite hydrogel dressing (Ccg@Fe/Bai@Fe3O4 NPs). The Ccg@Fe hydrogel was characterised using Fourier transform infrared spectroscopy (FTIR) and Ultraviolet-visible spectrophotometry (UV-Vis). The morphological, mechanical, and adhesion properties of the hydrogel were determined using scanning electron microscopy (SEM) and a universal testing machine. The hydrogel\'s swelling, hemostasis, and self-healing properties were also evaluated. Additionally, the study determined the release rate of hydrogel-loaded antimicrobial and anti-inflammatory Baicalin (Ccg@Fe/Bai) and evaluated the photothermal antimicrobial properties of hydrogel-loaded Fe3O4 nanoparticles (Ccg@Fe/Bai@Fe3O4 NPs) through synergistic photothermal therapy (PTT). Histological staining of mice skin wound tissues using Masson and H&E revealed that the Ccg@Fe/Bai@Fe3O4 NPs hydrogel dressing demonstrated potential healing ability with the aid of PTT. The study suggests that this multifunctional hydrogel dressing has great potential for wound healing.

While polydopamine (PDA) possesses the surface-independent adhesion property of mussel-binding proteins, significant differences exist between them. Particularly, PDA\'s short and rigid backbone differs from the long and flexible protein sequence of mussel-binding proteins. Given that adhesion relies on achieving a conformal contact with large surface coverage, PDA has drawbacks as an adhesive. In our study, we investigated the roles of each building block of PDA to build a better understanding of their binding mechanisms. Initially, we anticipated that catecholamine oligomers form specific binding with substrates. However, our study showed that the universal adhesion of PDA is initiated by the solubility limit of growing oligomers by forming agglomerates, complemented by multiple binding modes of catechol. Notably, in the absence of amines, poly(catechol) either remained in solution or formed minor suspensions without any surface coating, underscoring the essential role of amines in the adhesion process by facilitating insoluble aggregate formation. To substantiate our findings, we induced poly(catechol) aggregation using quaternized poly(4-vinylpyridine) (qPVP), leading to subsequent surface adhesion upon agglomerate formation.

Inspired by the mechanism by which microorganisms utilize siderophores to ingest iron, four different FeIII complexes of typical artificial siderophore ligands containing catecholate and/or hydroxamate groups, K3[FeIII-LC3], K2[FeIII-LC2H1], K[FeIII-LC1H2], and [FeIII-LH3], were prepared. They were modified on an Au substrate surface (Fe-L/Au) and applied as microorganism immobilization devices for fast, sensitive, selective detection of microorganisms, where H6LC3, H5LC2H1, H4LC1H2, and H3LH3 denote the tri-catecholate, biscatecholate-monohydroxamate, monocatecholate-bishydroxamate, and tri-hydroxamate type of artificial siderophores, respectively. Their adsorption properties for the several microorganisms were investigated using scanning electron microscopy (SEM), quartz crystal microbalance (QCM), and electric impedance spectroscopy (EIS) methods. The artificial siderophore-iron complexes modified on the Au substrates Fe-LC3/Au, Fe-LC2H1/Au, Fe-LC1H2/Au, and Fe-LH3/Au showed specific microorganism immobilization behavior with selectivity based on the structure of the artificial siderophores. Their specificities corresponded well with the structural characteristics of natural siderophores that microorganisms release from the cell and/or use to take up an iron. These findings suggest that release and uptake are achieved through specific interactions between the artificial siderophore-FeIII complexes and receptors on the cell surfaces of microorganisms. This study revealed that Fe-L/Au systems have specific potential to serve as effective immobilization probes of microorganisms for rapid, selective detection and identification of a variety of microorganisms.

In this study, inactivation of mushroom polyphenol oxidase (PPO) by low intensity direct current (DC) electric field and its molecular mechanism were investigated. In the experiments under 3 V/cm, 5 V/cm, 7 V/cm and 9 V/cm electric fields, PPOs were all completely inactivated after different exposure times. Under 1 V/cm, a residual activity of 11.88 % remained. The inactivation kinetics confirms to Weibull model. Under 1-7 V/cm, n value closes to a constant about 1.3. The structural analysis of PPO under 3 V/cm and 5 V/cm by fluorescence emission spectroscopy and molecular dynamics (MD) simulation showed that the tertiary structure was slightly changed with increased radius of gyration, higher potential energy and rate of C-alpha fluctuation. After exposure to the electric field, most of the hydrophobic tryptophan (TRP) residues turned to the hydrophilic surface, resulting the fluorescence red-shifted and quenched. Molecular docking indicated that the receptor binding domain of catechol in PPO was changed. PPO under electric field was MD simulated the first time, revealing the changing mechanism of the electric field itself on PPO, a binuclear copper enzyme, which has a metallic center. All these suggest that the low intensity DC electric field would be a promising option for enzymatic browning inhibition or even enzyme activity inactivation.

The healing of a wound under tension (hereafter, \"tension wound\") often coincides with the development of hypertrophic scars in clinical settings. Currently, compress bandages offer a potential alternative for the healing of tension wounds; however, their application in surgery is limited due to their prefabricated patch form. To overcome this, a tension-shielding hydrogel system was designed using photocurable catechol-grafted hyaluronic acid and tannic-acid silver nanoparticles (hereafter, \"HTA system\"). The hydrogel exhibited tension-shielding capacity, reducing wound tension via shape-fixation and ultimately reducing scar formation. The HTA hydrogel exhibited superior photothermal antibacterial efficacy, self-healing properties, and effective dissipation of energy, thereby promoting tissue regeneration. The hydrogel significantly inhibited the mechanotransduction pathway, thus preventing Engrailed-1 activation and reducing the fibrotic response. The HTA hydrogel system, therefore, provides a treatment strategy for tension wounds, burn wounds and other wounds that are prone to form hypertrophic scars via creating a tension-free local environment. STATEMENT OF SIGNIFICANCE: In our study, we presented a wound-dressing hydrogel system (HTA) that exhibit shape-fixing capacity in tension wound model. Here, we designed and modified a tension regulator, applied it to mice, and furthermore, established a tension wound model in mice with adjustable tension. Outcomes showed that the HTA hydrogel system can effectively form a shape-fixed environment on tension wounds and dynamic wounds, thus promoting scarless healing. Additionally, HTA performs injectability, rapid crosslinking, biocompatibility, wet adhesion, hemostasis and photothermal antibacterial properties. We believe this research has various potential clinical applications, including scarless-healing in tension wounds, treatment of acute bleeding, treatment of infected wounds, and even internal organ repair.

Hyaluronic acid-based hydrogels have been broadly used in medical applications due to their remarkable properties such as biocompatibility, biodegradability, super hydroscopicity, non-immunogenic effect, etc. However, the inherent weak and hydrophilic polysaccharide structure of pure hyaluronic acid (HA) hydrogels has limited their potential use in muco-adhesiveness, wound dressing, and 3D printing. In this research, we developed in-situ forming of catechol-modified HA hydrogels with improved mechanical properties involving blue-light curing crosslinking reaction. The effect of catechol structure on the physicochemical properties of HA hydrogels was evaluated by varying the content (0-40 %). The as-synthesized hydrogel demonstrated rapid prototyping, excellent wetting adhesiveness, and good biocompatibility. Furthermore, an optimized hydrogel precursor solution was used as a blue light-cured bio-ink with high efficiency and good precision and successfully prototyped a microstructure that mimicked the human hepatic lobule by using DLP 3D printing method. This catechol-modified HA hydrogel with tunable physicochemical and rapid prototyping properties has excellent potential in biomedical engineering.