OBJECTIVE: The aim of this study was to evaluate the removal efficiency of PRMTA and ECMPremixed applied to the coronal third according to the RET by UI and to examine the effect of different solutions on material removal.
METHODS: 40 permanent upper central teeth were used to simulate immature teeth. The samples were irrigated with 1.5% NaOCl and calcium hydroxide was placed. Samples were incubated in PBS. Then irrigation was done with 17% EDTA, the samples were randomly divided into 2 groups (n = 20):Group 1: PRMTA, Group 2: ECM Premixed. The materials were placed in the samples. Then the samples were scanned with micro-CT. Materials were removed by UI. Micro-CT scan of the samples was performed. Each material group was divided into 2 subgroups (n = 10): Group1 was MTAD, group2 was irrigated with 10% CA; then micro-CT was performed. Obtained images were positioned in DataViewer and analyzed with CTAn. The obtained data were statistically analyzed in IBM SPSS 25. The significance level was determined as 5%.
RESULTS: There was no significant difference between the initial volumes of the materials (p > 0.05). The amount of the remaining material after UI was significantly higher in the PRMTA (0.7471%) group compared to the ECM Premixed (0.0093%). There was no significant difference in terms of remaining material after irrigation with MTAD and CA in both groups (p > 0.05).
CONCLUSIONS: A great deal of the materials were removed by UI under the operation microscope. ECM Premixed was removed more effectively compared to the PRMTA. And, acidic solutions did not provide any additional benefit in material removal.

Acrylic resins are widely used as the main components in removable orthodontic appliances. However, poor oral hygiene and maintenance of orthodontic appliances provide a suitable environment for the growth of pathogenic microorganisms. In this study, strontium-modified phosphate-based glass (Sr-PBG) was added to orthodontic acrylic resin at 0% (control), 3.75%, 7.5%, and 15% by weight to evaluate the surface and physicochemical properties of the novel material and its in vitro antifungal effect against Candida albicans (C. albicans). Surface microhardness and contact angle did not vary between the control and 3.75% Sr-PBG groups (p > 0.05), and the flexural strength was lower in the experimental groups than in the control group (p < 0.05), but no difference was found with Sr-PBG content (p > 0.05). All experimental groups showed an antifungal effect at 24 and 48 h compared to that in the control group (p < 0.05). This study demonstrated that 3.75% Sr-PBG exhibits antifungal effects against C. albicans along with suitable physicochemical properties, which may help to minimize the risk of adverse effects associated with harmful microbial living on removable orthodontic appliances and promote the use of various materials.

OBJECTIVE: This study assessed the effects of 15% and 20% carbamide peroxide (CP) on color, surface roughness, and hardness of computer-aided design/computer-aided manufacturing (CAD/CAM) dental ceramics.
METHODS: This in vitro study was conducted on 120 Vita Mark II, Celtra Duo, and Suprinity CAD/CAM ceramic specimens. The ceramic specimens in each group (n = 40) were randomly assigned to two subgroups (n = 20) for polishing and glazing, and their baseline color, surface roughness (Ra), and hardness were assessed. In each subgroup, half of the specimens were exposed to 15% CP, while the other half were exposed to 20% CP. Their color change (ΔE), surface roughness, and hardness were then measured again. Surface roughness, hardness, and color were analyzed sequentially by profilometer, Vickers hardness tester, and spectrophotometer, respectively. Data were analyzed by repeated measures ANOVA, one-way ANOVA, and post hoc Bonferroni test (α = 0.05).
RESULTS: The surface roughness of all groups significantly increased after bleaching treatment (p < 0.05). Surface hardness of all groups decreased after bleaching treatment, but this reduction was only significant in Vita Mark II subgroups (glazed, polished, 15%, and 20% CP). The ΔE was not clinically and visually perceivable in any group.
CONCLUSIONS: The present results revealed that concentration of CP and type of surface treatment affected the surface properties of CAD/CAM ceramics. Type of surface treatment only affected the surface hardness of Vita Mark II ceramics (p < 0.05). Concentration of CP had a significant effect only on polished Vita Mark II.

OBJECTIVE: To assess the biocompatibility, bioactivity, and immunomodulatory properties of three new calcium silicate cement-based sealers: Ceraseal (CS), Totalfill BC Sealer (TFbc) and WellRoot ST (WR-ST) on human periodontal ligament stem cells (hPDLSCs).
METHODS: HPDLSCs were isolated from extracted third molars from healthy patients. Eluates (1:1, 1:2, and 1:4 ratio) and sample discs of CS, TFbc and WR-ST after setting were prepared. A series of assays were performed: cell characterization, cell metabolic activity (MTT assay) cell attachment and morphology (SEM assay), cell migration (wound-healing assay), cytoskeleton organization (phaloidin-based assay); IL-6 and IL-8 release (ELISA); differentiation marker expression (RT-qPCR assay), and cell mineralization (Alizarin Red S staining). HPDLSCs cultured in unconditioned (negative control) or osteogenic (positive control) culture media were used as a comparison. Statistical significance was established at p < 0.05.
RESULTS: All the tested sealers exhibited similar results in the cytocompatibility assays (cell metabolic activity, migration, attachment, morphology, and cytoskeleton organization) compared with a negative control group. CS and TFbc exhibited an upregulation of at least one osteo/cementogenic marker compared to the negative and positive control groups. CS and TFbc also showed a significantly higher calcified nodule formation than the negative and positive control groups. Both the marker expression and calcified nodule formation were significantly higher in CS-treated cells than TFbc treated cells. WR-ST exhibited similar results to the control group. CS and TFbc-treated cells exhibited a significant downregulation of IL-6 after 72 h of culture compared to the negative control group (p < 0.05).
CONCLUSIONS: All the tested sealers exhibited an adequate cytocompatibility. CS significantly enhances cell differentiation by upregulating the expression of key genes associated with bone and cementum formation. Additionally, CS was observed to facilitate the mineralization of the extracellular matrix effectively. In contrast, the effects of TFbc and WR-ST on these processes were less pronounced compared to CS. Furthermore, both CS and TFbc exhibited an anti-inflammatory potential, contributing to their potential therapeutic benefits in regenerative endodontics.
CONCLUSIONS: This is the first study to compare the biological properties and immunomodulatory potential of Ceraseal, Totalfill BC Sealer, and WellRoot ST. The results act as supporting evidence for their use in root canal treatment.

Wounds represent a growing global issue demanding increased attention. To expedite wound healing, technologies are under development, and light emitting diode (LED) devices of varying wavelengths are being explored for their stimulating influence on the healing process. This article presents a systematic literature review aiming to compile, organize, and analyze the impacts of LED devices on wound healing. This review is registered on the PROSPERO platform [CRD42023403870]. Two blinded authors conducted searches in the Pubmed, Web of Science, Scopus, Embase, and ScienceDirect databases. In vitro and in vivo experimental studies assessing LED utilization in the wound healing process were included. The search yielded 1010 studies, of which 27 were included in the review. It was identified that LED stimulates different healing pathways, promoting enhanced cell proliferation and migration, angiogenesis stimulation, increased collagen deposition, and modulation of the inflammatory response. Thus, it can be concluded that the LED stimulates cellular and molecular processes contingent on the utilized parameters. The effects depend on the standards used. Cell migration and proliferation were better influenced by green and red LED. The extracellular matrix components and angiogenesis were regulated by all wavelengths and the modulation of inflammation was mediated by green, red, and infrared LEDs.

OBJECTIVE: The aim of the current study was to assess the cleaning and smear layer removal efficacy of two different rotary files with or without chemical agents on primary teeth.
METHODS: For the study, 90 extracted primary maxillary incisors without internal or external resorption and with at least two-thirds of complete roots were chosen. Then, based on the kind of instruments used to clean and shape the canals, they were randomly assigned to three experimental groups, each consisting of 30 teeth. Group-I: The canal was instrumented manually with K-files, Group-II: The canal was instrumented with Kedo-S files, Group-III: The canal was instrumented with Kedo-SG Blue files. After the canals were finally instrumented, 2 mL of QMixTM solution was used to irrigate 15 samples from each group. The samples were subsequently allowed to remain in the canals for 90 seconds in order to eliminate the smear layer. After that a stereomicroscope was used to assess the cleaning effectiveness.
RESULTS: With irrigant solution, the highest mean value was found in manual K-files (2.86 ± 0.34), followed by Kedo-S files group (1.34 ± 0.26) and Kedo-SG Blue files (1.28 ± 0.18). Without irrigant solution, the highest mean value was found in manual K-files (2.92 ± 0.22) followed by Kedo-S files group (1.44 ± 0.18) and Kedo-SG Blue files (1.36 ± 0.14). There was a statistically significant difference found at all the three levels.
CONCLUSIONS: On conclusion, the current study\'s findings demonstrated that irrigation solution was significantly more effective in cleaning and removing smear layers from pediatric rotary files than manual K-files.
CONCLUSIONS: The effectiveness of endodontic therapy depends on a successful chemomechanical preparation. The canals are instrumented using either hand files or rotary instruments; there are several irrigation and instrumentation techniques. In order to completely sterilize the canals, chemical agents are utilized for irrigation during instrumentation. Due to their numerous biological, antibacterial, anti-inflammatory, and antioxidant qualities, many natural compounds are also utilized as irrigants. How to cite this article: Abushanan A. Evaluation of the Smear Layer Removal Ability of Various Rotary Files with/without Chemical Agents on Primary Teeth: An In Vitro Study. J Contemp Dent Pract 2024;25(4):354-357.

OBJECTIVE: The aim of the study was to compare and evaluate the microleakage of fiber-reinforced glass ionomer cement (GIC) and conventional glass ionomer cement restorations immersed in three different beverages.
METHODS: A total of 96 human exfoliating deciduous molars were selected which were cleaned and disinfected. Standardized Class V cavity preparations were done and buccal surface were restored with experimental fiber-reinforced glass ionomer cement (Exp-FRGIC), lingual surface were restored with Type II conventional GIC. They were divided into four groups according to the test beverage. The samples were subjected to various immersion regimes and evaluated for microleakage under stereomicroscope.
RESULTS: Intragroup comparison for (Exp-FRGIC) showed significant microleakage when immersed in fresh fruit juice at high immersion whereas intragroup comparison in conventional GIC, showed highest microleakage with soft drink. Intergroup comparison of (Exp-FRGIC) in high immersion regime, showed more microleakage with specimen immersed in soft drink followed by fresh fruit juice.
CONCLUSIONS: It can thus be concluded that the three beverages used in the study affected the microleakage of both restorative materials significantly.
CONCLUSIONS: Increasing usage of fruit juices in the pediatric diet has a definite impact on the progression of caries and it directly or indirectly affects the quality of restorations placed in the oral cavity. How to cite this article: George MA, Chandak SA, Khekade SH, et al. Comparative Evaluation of Microleakage of Fiber-reinforced Glass Ionomer Cement and Conventional Glass Ionomer Cement Restorations Immersed in Three Different Beverages: In Vitro Study. J Contemp Dent Pract 2024;25(4):346-353.

OBJECTIVE: The purpose of this study was to evaluate the effectiveness and strength of three various dentin-bonding agents used with adhesives on primary teeth.
METHODS: The study used 80 recently extracted, healthy human maxillary anterior primary teeth that had undergone physiologic resorption, or over-retention. Teeth were cut to expose a flat dentin surface at a depth of 1.5 mm. All samples were divided into four groups (20 samples in each group) as follows: Group I-Control group, Group II-Primary teeth bonding with 6th-generation bonding agent, Group III-Primary teeth bonding with 7th-generation bonding agent, Group IV-Primary teeth bonding with 8th-generation bonding agent. All of the samples\' dentinal surfaces were covered with composite resin using a Teflon mold after adhesive had been applied. A universal testing machine (INSTRON) was used to assess the shear bond strength. Data were collected and statistically analyzed.
RESULTS: The maximum mean shear bond strength was found in 8th-generation bonding agent (30.76 ± 0.16), followed by 7th-generation bonding agent (26.08 ± 0.21), 6th-generation bonding agent (25.32 ± 0.06), and control group (6.18 ± 0.09). Statistically significant difference was found between the three different bonding agents (p < 0.001).
CONCLUSIONS: On conclusion, the 8th-generation bonding agent demonstrated a greater shear bond strength to dentin than the 7th and 6th-generation bonding agent.
CONCLUSIONS: The emergence of different bonding techniques to the market improves the durability and quality of restorations. An effective bonding to the tooth would also reduce bacterial penetration, marginal microleakage, possibility of pulpal inflammation preserve tooth structure, and postoperative sensitivity by allowing less cavity preparation. How to cite this article: Alqarni AS, Al Ghwainem A. Assessment of the Efficacy and Bond Strength of Different Dentin-bonding Agents with Adhesives on Primary Teeth: An In Vitro Study. J Contemp Dent Pract 2024;25(4):342-345.

OBJECTIVE: The study aimed to assess the microleakage of nanoparticle-based (NPB) cyanoacrylate sealer and epoxy resin-based (ERB) sealer using radioisotope method and confocal laser scanning microscopy (CLSM).
METHODS: A total of 100 single-rooted teeth were collected; specimens were accessed, instrumented, and irrigated, and randomly distributed into 4 groups of 25 samples each: Group I: Positive control, group II: Negative control, group III: Obturated with NPB sealer, and group IV: Obturated with ERB sealer. All samples were immersed in 99mTc pertechnetate solution, for 3 hours after which radioactivity was estimated under a Gamma camera. The radioactivity released by specimens before and after nail varnish removal was statistically analyzed. After 2 weeks, the same samples were used for CLSM analysis. The sealer tubular penetration depth was measured at the deepest level for each group using ZEN lite 2012. Data collected was statistically evaluated.
RESULTS: The amount of radioactivity observed at first in group III and group IV was 194.76 and 599.12 units, respectively, with p-value < 0.001, indicating significant interaction, and after nail varnish removal, it was 89.68 and 468.44 units, respectively, with a p-value < 0.001; again, indicating statistical significance. Hence, the radioactivity of NPB sealer was found to be lower than ERB sealer in both cases, indicating better sealing of the former. The photomicrographs show that mean value of dye penetration in NPB sealer in first, second, and third segment from apex was 85.06, 75.73, and 66.09, respectively; while in the case of ERB sealer, those were 597.28, 461.17, and 195.68, respectively; with p-value < 0.001; signifying that NPB sealer exhibited higher resistance to microleakage than ERB sealer.
CONCLUSIONS: The NPB sealer can become a potential root canal sealer in future endodontics due to superior physiochemical properties attributed to the cyanoacrylate and incorporated nanoparticles.
CONCLUSIONS: The study clinically signifies that we can equally use the radioisotopic method along with confocal method while conducting the microleakage studies. In addition, NPB sealer can be an emerging replacement with better properties than gold standard root canal sealers for clinical use. How to cite this article: Shetty C, Qaiser S, Shetty A, et al. Evaluation of Microleakage of Nanoparticle-incorporated Cyanoacrylate Root Canal Sealer Using the Radioisotopic Method: An In Vitro Study. J Contemp Dent Pract 2024;25(4):335-341.

OBJECTIVE: The aim of the current study was to evaluate the penetration depth and smear layer removal of root canal irrigant using various irrigation activation techniques.
METHODS: In this investigation, sixty single-rooted premolars extracted for orthodontic purposes were chosen. Diamond burs were used to create an access cavity, and #10 K-file was used to determine the patency. About sixty samples were divided into the following three groups (20 samples in each group), group I: Irrigation with conventional needle, group II: Activation of EndoVac system, group III: Passive ultrasonic irrigation (PUI). The efficacy of the smear layer was assessed using a scanning electron microscopy at a ×2000 magnification. One-way ANOVA was used to record and analyze the data. All statistical analyses were performed with a significance level of p < 0.05.
RESULTS: At coronal third, the maximum smear layer was removed in group II (1.26 ± 0.02) followed by group III (1.84 ± 0.16) and group I (2.89 ± 0.21). At middle third, smear layer removal was maximum in group I (1.18 ± 0.10) followed by group III (1.72 ± 0.09) and group I (2.66 ± 0.18). At apical third, the more smear layer was removed in group II (1.02 ± 0.01) followed by group III (1.58 ± 0.08) and group I (2.38 ± 0.06). There was a highly significant difference found between the three different irrigation systems at all three levels (p < 0.001).
CONCLUSIONS: In conclusion, every irrigation device that was evaluated was successful in removing the smear layer from the root canal. However, the EndoVac system group removed a greater amount of smear layer compared with PUI and conventional needle group.
CONCLUSIONS: With the goal of promoting cleaning that is beyond the ability of mechanical devices, irrigation is a crucial part of root canal therapy. If an efficient irrigation delivery system is used, the irrigants can reach the working length (WL). This type of distribution system needs to provide a suitable amount of irrigants up to the WL, as well as have enough flow and be effective at debriding the entire canal system. How to cite this article: Pujari MD, Das M, Das A, et al. Assessment of Smear Layer Removal and Penetration Depth of Root Canal Irrigant Using Different Irrigation Activation Systems: A Comparative Study. J Contemp Dent Pract 2024;25(4):331-334.