This in vitro study evaluated the influence of radiant exposure and material shade on the degree of conversion (DC) and microhardness of a resin-based composite (RBC). Sixty-four RBC specimens in shades A1E (enamel) and A4D (dentin) were light cured at a calibrated exitance of 1000 mW/cm2 for 5, 10, 15, or 20 seconds, resulting in radiant exposure levels of 5, 10, 15, or 20 J/cm2. The DC was determined using Fourier-transform infrared spectroscopy (n = 3 per shade per exposure level). The Knoop hardness number (KHN) was measured on the top and bottom surfaces of each specimen (n = 5 per shade per exposure level). Data were analyzed using 2- and 3-way analyses of variance and post hoc Tukey tests (α = 0.05). The RBC shade did not affect the DC (P = 0.860), and the lowest DC values were achieved with an exposure level of 5 J/cm2 (P < 0.001). The shade did not affect the KHN on the top surface, but the radiant exposure level did, with the application of 5 J/cm2 resulting in significantly lower values (P < 0.05). For the bottom surface, shade A1E showed significantly higher KHN values than A4D (P < 0.001). An increase in the radiant exposure led to increased DC and KHN for both shades of RBC until reaching a saturation point of 10 J/cm2 for A1E and the top surface of A4D. The darker and more opaque shade was not adequately polymerized at a 2-mm depth, even when the highest radiant exposure level was applied.

This study aimed to design a new surgical guide for controlling the mesiodistal distance between implant osteotomies and adjacent teeth as well as the osteotomy depth in partially edentulous patients. The guide kit was designed with design software and milled with a CNC (computer numerical control) router. The guide consisted of 2 components-stoppers and crown guides-for determining the drilling depth and mesiodistal position, respectively. The stoppers were designed in 7.5-, 9.5-, and 11.5-mm lengths, and the crown guides were fabricated with outer diameters of 5.0, 6.0, 7.0, and 8.0 mm. The accuracy of the guide was assessed by preparing a total of 20 implant osteotomies in 4 partially edentulous models and comparing the dimensions of the actual osteotomies to the values that were predicted to occur with the use of the surgical guides. Osteotomies were prepared using the 7.5-mm stopper with either the 7.0- or 8.0-mm crown guide. Cone beam computed tomography (CBCT) was used to obtain images for analysis of osteotomy-tooth mesiodistal distances, which were predicted to be 3.0 or 5.5 mm, depending on position; interosteotomy mesiodistal distances, which were predicted to be 3.0 mm; and osteotomy depth, which was predicted to be 11.5 mm. A 1-sample t test was used to determine if there were significant differences between the predicted values and the measurements of the guided osteotomies on the CBCT images of the mandibular models, and an independent t test was conducted to compare the results of 3.0- and 5.5-mm osteotomy-tooth distances (α = 0.05). Differences between the predicted and actual values of the interosteotomy mesiodistal distance (P = 0.516) and osteotomy depth (P = 0.847) were not statistically significant. The actual osteotomy-tooth mesiodistal distances were significantly different from the predicted values of 3.0 (P = 0.000) and 5.5 mm (P = 0.001), with higher mean differences of 0.46 and 0.60 mm, respectively. The designed guide had a high accuracy in achieving optimal linear interosteotomy mesiodistal distances and osteotomy depths, and the obtained mean values were clinically acceptable.

BACKGROUND: The probability of a positive outcome of root canal therapy is substantially higher if the infection is eradicated successfully before the obturation of the root canal system. Irrigation is an essential aspect of root canal debridement, as it enables more thorough cleaning than is possible with root canal instrumentation alone. To overcome the side effects of chemical irrigants, there has been a search for herbal medicines as substitutes.
OBJECTIVE: The aim of the present study was to explore the antimicrobial efficacy of white tea-mediated silver nanoparticles (AgNPs) formulated as an intracanal irrigant against Enterococcus faecalis, and to compare it with the efficacy of chlorhexidine and sodium hypochlorite irrigants.
METHODS: The experimental groups were as follows: group I - white tea-mediated AgNPs; group II - 2% chlorhexidine; and group III - 2.5% sodium hypochlorite. The characterization of AgNPs was performed using ultraviolet-visible (UV-Vis) spectroscopy and transmission electron microscopy (TEM) analysis. Enterococcus faecalis was inoculated onto Mueller-Hinton agar plates. The disks impregnated with irrigants were placed on the inoculated plates and incubated aerobically at 37°C for 24 h. Then, the growth inhibition zones were measured. Statistical analysis was performed using the one-way analysis of variance (ANOVA) and the post hoc tests.
RESULTS: A concentration of 50 μL of white tea-mediated AgNPs exhibited the greatest zone of inhibition (32 ±2 mm), followed by 2% chlorhexidine (25 ±1 mm) and 2.5% sodium hypochlorite (23 ±3 mm).
CONCLUSIONS: White tea-mediated AgNPs showed promising results in the elimination of E. faecalis, being superior to chlorhexidine and sodium hypochlorite irrigants.

OBJECTIVE: This study aimed to develop a systematic interdental brush set with size distribution based on the passage hole diameter (PHD), addressing existing gaps in size selection criteria for effective interdental cleaning.
METHODS: In the first step, an interdental brush set that ascends stepwise according to the PHD value was envisioned. The study was divided into three phases: (i) in-vitro determination of PHD values of a currently existing assortment on the market by 13 calibrated dental professionals, (ii) in-vitro assessment of forces during insertion, and (iii) creation and evaluation of new prototypes for missing or non-matching PHD sizes. Intra- and inter-rater reliability, assessed with the intraclass correlation coefficient (ICC), as well as insertion forces and PHD sizes at all stages were reported.
RESULTS: In the existing range, three interdental brushes fitting the desired PHD sizes were initially identified. Mean insertion forces between 0.3 and 1.7 N were documented based on raters\' PHD choices. Two additional rounds of measurements with prototypes adapted in diameter and shape were necessary, particularly for PHD values of 1.4, 2.3 and 2.6. High intra- and inter-rater reliability was observed throughout the study (ICC > 0.95), ensuring consistent evaluations. After three rounds of assessments, a prototype was successfully identified for each targeted PHD value in the systematised set, showcasing reliable sizing and insertion forces.
CONCLUSIONS: Using a structured approach, a comprehensive interdental brush set was developed with reliable PHD sizing and moderate insertion forces. The verification of size reliability through measurements by dentists represents a novelty in development and underlines the importance of accurate brush size selection for optimal biofilm control. Whether a systematic set based on the PHD value offers added value for clinical practice, and at what intervals, must be demonstrated in further studies.

This in vitro study aimed to investigate potential changes in the color and roughness of dental enamel resulting from the use of different toothpaste formulations during bleaching with violet LED light (405 nm). Sixty specimens of bovine incisors, each measuring 6 × 6 × 3 mm, were segregated into six distinct experimental groups based on their respective treatments (n = 10): C + VL: Brushing with Colgate® Total 12 + bleaching with violet LED; LB + VL: Brushing with Colgate® Luminous White Brilliant + bleaching with violet LED; LI + VL: Brushing with Colgate® Luminous White Instant + violet LED bleaching; C: Brushing with Colgate® Total 12; LB: Brushing with Colgate® Luminous White Brilliant; LI: Brushing with Colgate® Luminous White Instant. The examined variables included alterations in color (∆L*, ∆a*, ∆b*, ∆Eab, and ∆E00), surface roughness (Ra), and scanning electron microscopy observations. No statistically significant distinctions emerged in total color variations (∆E00 and ∆E) among the groups under scrutiny. Notably, the groups that employed Colgate® Luminous White Instant displayed elevated roughness values, irrespective of their association with violet LED, as corroborated by scanning electron microscopy examinations. It can be concluded that whitening toothpastes associated to violet LED do not influence the color change of dental enamel in fifteen days of treatment. Toothpastes with a higher number of abrasive particles showed greater changes in enamel roughness, regardless of the use of violet LED.

Experimental medicine has formed the basis for generating medical knowledge for several centuries. The development of various experimental tools introduced at different times in medical practice has allowed the acquisition of knowledge with increasingly sophisticated scientific bases. Consequently, through in vivo, in vitro and, more recently, in silico experiments, we have witnessed an uninterrupted collection of experimental data potentially valuable for medicine, especially for Nephrology. We are gradually contemplating the uniqueness of individuals for the benefit of life and human dignity.

OBJECTIVE: To analyze the differences in cusp height on radiographs, establishing proportional relationships between cusp and alveolar bone crest (ABC) measurements. The goal of this study was to develop a correction coefficient by considering this proportion.
METHODS: Twenty-one artificial teeth, molars and premolars, and bovine ribs were used. Interproximal radiographs were taken with the aid of a positioner. The vertical angles used were: 0°, + 5°, and + 10°, and processed using three spatial resolutions measured in line pairs per mm (lp/mm): 20, 25 and 40. The Perio filter was applied to each image, in addition to the original one. Combinations of angle, resolution, and filter were made. Eighteen images were analyzed by three specialists, resulting in 252 measurements for each evaluator, totaling 756 measurements.
RESULTS: The overall variability of the measurements can be explained mainly by the variation in tooth anatomy. The 0° 25 lp/mm Perio filter method was the closest one to the actual clinical scenario for both cusps and ABC. The correction factor managed to explain 71.45% of the errors.
CONCLUSIONS: The variation in vertical angulation interferes with cusp and ABC measurements, and the angulation at 0º and spatial resolution of 25 lp/mm showed better results. The use of correction coefficients allowed approaching actual measurement values.
CONCLUSIONS: More accurate ABC height measurements are essential even in radiographic exams that do not meet the standard of excellence because the need to repeat radiographic exams is then eliminated.

Bioactive peptides derived from native proteins modulate physiological processes in the metabolic pathways. Given that multiple protocols in the literature mimic the digestion of dietary components, gathering studies that use such models directed at protein digestion processes is critical. This systematic review aimed to gather evidence that adopted adequate experimental models to simulate human protein digestion. The databases searched were PubMed, Web of Science, ScienceDirect, Embase, Virtual Health Library, and Scopus. A total of 1985 articles were found, resulting in 20 eligible in vitro studies. The Office of Health Assessment and Translation was used to evaluate methodological quality. Seven studies used plant-based protein sources, twelve used animal protein sources, and one used both. The duration of the oral phase varied, although 60% of the studies employed a protein digestion period of 120 min. Amylase, pepsin, and pancreatin enzymes were utilized in 40% of the studies, with pH levels of 7, 3, and 7, respectively, during the oral, gastric, and intestinal phases. The INFOGEST harmonized static model was adopted by 65% of the studies; INFOGEST is the most effective model for simulating gastrointestinal protein processes in humans and can be used to answer several research questions because it describes experimental conditions close to the human physiological situation.

OBJECTIVE: This study aimed to evaluate the dentin bond performance of various resin luting cement (RLC) systems combined with universal adhesives in different luting strategies.
METHODS: Three self-adhesive resin luting cements (SRLCs) were used with universal adhesives as primers. Twelve specimens per group were prepared to measure shear bond strength (SBS) under distinct luting strategies in etch-&-rinse and self-etch modes. Regarding luting strategies, the bonded specimens were categorized into four groups based on tooth primer application and the curing mode of the SRLC paste: (i) with light irradiation of the tooth primer (wL) + dual-cure mode (DC) of the SRLC paste, (ii) wL + self-cure mode (SC) of the SRLC paste, (iii) without light irradiation of the tooth primer (woL) + DC mode of the SRLC paste, and (iv) woL + SC mode of the SRLC paste. Specimens were also subjected to different storage conditions: 24 h in water (baseline condition) and 10,000 cycles of thermal cycling.
RESULTS: Luting strategy, storage condition, and SRLC system type significantly influenced dentin SBS values in both etching modes. Notably, certain SRLCs exhibited significantly higher dentin SBS when the primer was light-irradiated compared with no primer irradiation.
CONCLUSIONS: Most SRLCs demonstrated higher dentin bond strength with light-irradiated primers, suggesting potential enhancement of dentin bond performance via primer light irradiation.

The aim of the study was to measure the degree of dentine surface roughness caused by five distinct lasers used to treat dentine hypersensitivity, as well as to evaluate the subsequent bacterial colonization on these irradiated surfaces. Sixty human maxillary premolar teeth without caries or restoration which were extracted for periodontal reasons were used in this study. Five different types of lasers were applied to the root dentin surface. Tested samples were divided into six groups of 10 samples each; control, diode (810 nm), diode (980 nm), Nd: YAG, Er: YAG, and Er, Cr: YSGG laser groups. The arithmetic mean of the surface roughness values (Ra) and the average roughness over a measurement area (Sa) were measured pre- and post-application using any of the laser types. Swab samples were then collected from the dentin surface. Following a 24-hour incubation period at 37 °C, the colony forming units were counted using a stereoscope. The results demonstrated a statistically significant difference in the surface roughness values pre- and post-application (Ra and Sa, respectively) in the Er, Cr: YSGG laser group (p = 0.037,p = 0.007). No significant difference was observed in the other groups (p > 0.05). There was no statistically significant difference in the number of bacterial colonies observed between the test and control groups. Diode and Nd: YAG lasers showed either a decrease or no change in surface roughness; however, the hard tissue lasers (Er: YAG, Er, Cr: YSGG) showed an increase. The Er: YAG and Nd: YAG laser groups exhibited decreased bacterial adhesion compared to the other groups.