UNASSIGNED: Optimal dimensional stability is required for successful root canal treatment. A sealant called EndoSeal mineral trioxide aggregate (MTA) was recently introduced to the market due to its favorable physical and chemical properties. On the other hand, AH Plus (AHP) is considered the gold-standard seal.
UNASSIGNED: In this ex vivo quasi-experimental study, 24 single-canal premolars extracted from humans were cleaned and shaped with a motorized and rotary file, then that is divided into two groups. The teeth of each group were filled with gutta F3 and each type of sealant. The teeth were scanned by a micro-computed tomography device after 24 h. After 7 days of storage in phosphate-buffered saline solution, the samples were re-scanned. Data were analyzed using SPSS software (version 21). Descriptive data were presented as frequency, percentage, mean, and standard deviation. The Shapiro-Wilk and Kolmogorov-Smirnov tests were used to investigate the normality of the data. The Mann-Whitney test was used to compare the two groups, and the differences were ultimately not significant. The level of significance was set at 0.05 (P < 0.05).
UNASSIGNED: The mean differences between sealer volumes before and after the intervention were not significantly different between the two groups indicating that the EndoSeal MTA sealer is not inferior to the gold-standard root canal sealer, AHP.
UNASSIGNED: EndoSeal MTA can be considered a reliable sealer in endodontic treatments and be subjected to further investigation.

UNASSIGNED: To provide a continuous seal of the root canal, root-filling material should bond to the root canal dentin, ensuring the integrity of both the root-filling material and dentin remains in a static and functional state. The present study assessed the push-out bond strength of mineral trioxide aggregate (MTA) and cold ceramic (CC).
UNASSIGNED: In this laboratory trial study, 20 single-rooted, extracted human teeth without caries and cracks were selected. Each tooth was mounted in cold-curing resin. Then, 3 mm slices of mid-root dentin were obtained from each tooth. The specimens were randomly divided into two groups (n = 10) and filled with MTA ProRoot and CC. All specimens were stored for 30 days in an incubator at 37°C and 100% humidity. The push-out bond strength of the test materials was measured using a cylindrical punch with a 1-mm diameter. The punch was pushed against the test specimen at a speed of 1.0 mm/min using a universal material testing machine, extruding the filling test material. The push-out force during the test was recorded, and then, the internal surface of the teeth was examined to evaluate the mode of failure. Independent t-test and Chi-square were used to analyze the data. P < 0.05 was considered a significance threshold.
UNASSIGNED: The mean push-out bond strength in the CC group was 24.58 (MPa), and in MTA ProRoot, it was 23.77. No significant difference was observed between the two groups. The most frequent mode of failure in both groups was adhesive failure.
UNASSIGNED: The two materials have adequate push-out bond strength to root dentin, and there is no difference between the bond strength and mode of failure of the two materials.

UNASSIGNED: Calcium silicate cement like mineral trioxide aggregate (MTA) and Biodentine are known for their biocompatibility and are effectively used as retrograde filling materials. During their placement, the materials interact with oral tissue fluids like saliva and blood, so the aim of the present study was to assess the effect of distilled water, saline, and blood on the surface microstructure and compressive strength of MTA and Biodentine.
UNASSIGNED: In this experimental study, a total of 84 custom-made cylindrical molds were randomly allocated into two main cement groups (n = 42) MTA and Biodentine. Each group was further subdivided into three subgroups (n = 14) as per the testing conditions, that is, samples exposed to distilled water, saline, and fresh blood. Around 10 samples from each subgroup were tested for compressive strength using a universal testing machine (UTM), and the remaining four samples were used to examine the surface characteristics of MTA and Biodentine using a scanning electron microscope (SEM). One-way analysis of variance (ANOVA) and Tukey\'s post hoc tests were employed to calculate the mean compressive strength and standard deviation values.
UNASSIGNED: There was a significant difference in the compressive strength between MTA and Biodentine, especially in the presence of blood. During the SEM analysis, it was found that samples contaminated with blood or saline were devoid of acicular crystals in both groups. MTA group showed a more porous matrix with few hexagonal crystals than Biodentine.
UNASSIGNED: Biodentine may be advantageous as a root-end filling or root repair material in the presence of blood.
UNASSIGNED: Bhullar KK, Gupta V, Sapra M, et al. Evaluation of Surface Microstructure and Compressive Strength of Mineral Trioxide Aggregate and Biodentine in the Existence and Absence of Oral Tissue Fluids. Int J Clin Pediatr Dent 2024;17(S-1):S1-S5.

UNASSIGNED: This study aimed to evaluate and compare the clinical and radiographic success of platelet-rich fibrin (PRF) and mineral trioxide aggregate (MTA) as direct pulp capping (DPC) agents in primary molars.
UNASSIGNED: In this study, 50 primary first and second molars from healthy children aged 5-9 years requiring pulp therapy were randomly allocated into two groups. In the PRF group, after coronal pulp removal and hemostasis, the remaining pulp tissue was covered with PRF preparation. In the MTA group, after coronal pulp removal and hemostasis, MTA was placed, followed by a zinc oxide eugenol (ZOE) base and glass ionomer cement (GIC) in both groups. Clinical and radiographic evaluations were undertaken at 1-, 3-, 6-, 9-, and 12-month intervals.
UNASSIGNED: By the end of the 12th month, the overall success rate was 82.6% in the PRF group, whereas it was 61.9% in the MTA group.
UNASSIGNED: Platelet-rich fibrin can be used successfully as an appropriate alternative material in DPC of primary teeth when compared with MTA.
UNASSIGNED: Tiwari T, Tyagi P, Tiwari S, et al. To Evaluate and Compare Platelet-rich Fibrin and Mineral Trioxide Aggregate as Direct Pulp Capping Agents in Primary Molars: A Randomized Prospective Clinical Study. Int J Clin Pediatr Dent 2024;17(S-1):S25-S29.

BACKGROUND: This study aimed to compare the in vitro shear bond strength (SBS) of mineral trioxide aggregate (MTA) and dual-cured, resin-modified calcium silicate material (Theracal PT) to composite resin, compomer, and bulk-fill composite, and to evaluate the bond failure mode under a stereomicroscope.
METHODS: Ninety acrylic specimens, each with a 4 mm diameter and 2 mm height central hole, were prepared. These specimens were randomly divided into two groups based on the capping materials: MTA and Theracal PT. Each group was further subdivided into three subgroups (n = 15) according to the restorative materials: composite resin, compomer, and bulk-fill composite. The specimens were then subjected to shear testing using a universal testing machine at a crosshead speed of 1 mm/min. Post-test, the fracture locations were examined using a stereomicroscope. Data were analyzed using a two-way analysis of variance (ANOVA) and the Tukey test.
RESULTS: The SBS values for the Theracal PT group were significantly higher than those for the MTA group (p < 0.001). Within the MTA groups, no significant differences were observed in SBS values across the different restorative materials. However, a significant difference was found between the mean SBS values of the Theracal PT + composite resin group and the Theracal PT + compomer group (p < 0.001).
CONCLUSIONS: Theracal PT shows promise in dentistry due to its superior bond strength. Given its bond values, Theracal PT appears capable of forming durable and long-lasting restorations by establishing reliable bonds with various restorative materials commonly used in dentistry.

BACKGROUND: The existence of voids within the mineral trioxide aggregate (MTA) composition is one of the factors that can influence the treatment outcome. The primary objective of this study was to quantitatively assess and compare the MTA orthograde obturation quality in severe curved root canals using two different MTA compaction techniques: manual compaction with K-file, or Auger technique using micro-computed tomography (micro-CT) imaging.
METHODS: For this study, 26 mandibular first molar teeth with severely curved mesiobuccal root canals were selected. These samples were randomly divided into two groups. All root canals were instrumented using ProTaper Gold rotary files up to the F3 file at the working length. In one group, OrthoMTA was compacted using a stainless steel K-file, while in the other group, the Auger technique was employed for compaction into the root canals. Once the MTA had completely set, the filled root canals were subjected to scanning using a high-resolution micro-CT scanner. The porosity volume was determined as a percentage in relation to the overal volume of the canal, and the collected data were subjected to analysis using SPSS software, with the significance level set at P < 0.05.
RESULTS: The two techniques had no significant difference in open, closed, and total mean porosity. In both groups, the mean of open porosity was significantly more than closed porosity.
CONCLUSIONS: According to the results of the present study, neither of these two techniques is preferred to the other, and factors such as working time, etc., can be considered to choose the more appropriate clinical technique.

Mineral Trioxide Aggregate (MTA) is the gold standard for vital pulp treatment (VPT), but its superiority over novel calcium silicate-based cements in permanent teeth lacks systematic evidence. This study aimed to compare the efficacy of these materials in VPT through a network meta-analysis. A systematic search was conducted in MEDLINE, EMBASE, Cochrane Library, and Web of Science until January 20, 2024. The inclusion criteria were randomized controlled trials involving VPT with biomaterials and reversible or irreversible pulpitis diagnoses in mature permanent teeth. The primary outcome was the odds ratio (OR) of failure rates with 95% confidence intervals. In the 21 eligible trials, failure rates were significantly higher with calcium-hydroxide than MTA at six (OR 2.26 [1.52-3.36]), 12 (OR 2.53 [1.76-3.62]), and 24 months (OR 2.46 [1.60-3.79]). Failure rates for Totalfill at six (OR 1.19 [0.55-2.58]) and 12 months (OR 1.43 [0.71-2.92]), and Biodentine at six (OR 1.09 [0.66-1.78]), 12 (OR 1.21 [0.74-1.96]), and 24 months (OR 1.47 [0.81-2.68]) were not significantly different from MTA. The results were similar in the direct pulp capping subgroup, whereas, in the partial and full pulpotomy subgroup, there was not enough evidence to achieve significant differences. MTA, Biodentine, and Totalfill are the most efficient materials for VPT. However, calcium-hydroxide-based materials are not recommended in VPT.

This study aims to investigate the effect of Mineral Trioxide Aggregate (MTA), a bioactive endodontic cement, and Concentrated Growth Factor (CGF), a second-generation autologous growth factor, on pulpotomy-induced pulp inflammation. The study utilized the maxillary anterior central teeth of thirty-six young male Sprague Dawley rats. Forty-eight teeth were randomly assigned to two groups (12 rats/group; 24 teeth/group) based on the capping material (MTA or CGF). Subsequently, two subgroups (MTAG and CGFG) were formed per group (12 teeth/group) based on the time following pulpotomy (2-weeks and 4-weeks). The central teeth of the 12 animals assigned to the control group (CG) were not manipulated in any way, both in the 2-week group and in the 4-week group. Tissue samples extracted from rats at the end of the experiment were stained with H&E for histopathological analysis. For immunohistochemical analysis, primary antibodies for TNF-α and NF-kβ/65 were incubated. Data obtained from semi-quantitative analysis were assessed for normal distribution using Skewness-Kurtosis values, Q-Q plot, Levene\'s test, and the Shapiro-Wilk test on statistical software. A P value < 0.05 was considered significant. When compared with the control group, both MTAG and CGFG showed increased edematous and inflammatory areas. In MTAG, edematous and inflammatory areas decreased significantly from the 2nd week (2(2-2), 2(1-2)) to the 4th week (1(1-1), 1(0-1)), while in CGFG, edematous areas decreased (2(2-3), 1.5(1-2)), and inflammatory areas increased significantly (2(2-3), 3(2-2.5)). When compared with the control group, TNF-α and NF-kβ/p65 positivity were higher in both MTAG and CGFG. In MTAG, TNF-α [2(1.5-2)] and NF-kβ/p65 [1.5(1-2)] positivity decreased significantly from the 2nd week to the 4th week [TNF-α: 1(1-1), NF-kβ/p65: 1(1-2)], while no significant change was observed in CGFG. In conclusion, this study revealed a reduction in cells showing TNF-α and NF-kβ/p65 positivity in the MTA treatment group compared to the CGF group. Although MTA demonstrated more favorable results than CGF in mitigating pulpal inflammation within the scope of this study, further experimental and clinical investigations are warranted to obtain comprehensive data regarding CGF.

OBJECTIVE: This study aims to compare and assess the compression strength, microhardness, and surface texture of two sets of materials: mineral trioxide aggregate (MTA) PlusTM and bacterial cellulose nanocrystal (BCNC)-reinforced MTA PlusTM.
METHODS: According to the ASTM E384 standard, the cylindrical molds made of plexiglass with an internal diameter of 6 mm and a height of 4 mm were fabricated using computer numerical control laser cutting. A total of 20 samples (n=10) in each group were considered in this experimental study: Group I (control group) MTA PlusTM (Prevest DenPro Limited, India) and Group II (experimental group) BCNC (Vedayukt India Private Limited, India)-reinforced MTA PlusTM. After preparation, the molds were incubated at 37°C in a fully saturated condition for about 24 hours, and then the compression strength, microhardness, and scanning electron microscopy analyses were performed at different magnifications. The obtained data were then statistically analyzed.
RESULTS: Quantitative analysis revealed that there is a statistically significant difference between MTA PlusTM and BCNC-reinforced MTA PlusTM  (p<0.002). The Wilcoxon signed-rank test and Mann-Whitney U-test revealed that BCNC-reinforced MTA PlusTM  showed significantly higher compression strength (33.80±3.83 MPa, p=0.00) and surface microhardness (642.85±24.00 μm, p=0.00) than the control group.
CONCLUSIONS: Based on our findings, it was concluded that there is a statistically significant difference between both study groups. Thus, incorporating BCNC into the MTA PlusTM  significantly increased the compression strength and surface microhardness of the MTA PlusTM cement.
CONCLUSIONS: Numerous dental applications have been investigated for bacterial cellulose. Many benefits of bacterial cellulose are available, which include its effects on moldability, low cost, high water retention capacity, biocompatibility, and biodegradability. Furthermore, the addition of BCNC to MTA PlusTM  accelerates the material\'s hardening process and decreases its setting time, which in turn shortens clinical chairside procedural timing and thereby improves patient satisfaction.

UNASSIGNED: In the field of conservative dentistry and endodontics, mineral trioxide aggregate (MTA), commonly used, possesses advantages such as biocompatibility, antimicrobial properties and osteogenic potential. This study investigated the feasibility of utilizing membrane form mineral trioxide aggregate (MTA) as a barrier membrane in guided bone regeneration (GBR) procedures.
UNASSIGNED: Membranes were electrospun from three different formulations: 15 w/v% Polycaprolactone (PCL), 13 w/v% PCL + 2 w/v% MTA (2MTA), and 11 w/v% PCL + 4 w/v% MTA (4MTA). Physicochemical and mechanical properties of the electrospun membrane were compared, encompassing parameters such as surface morphology, fiber diameter distribution, chemical composition, phase identification, tensile stress, pH variation, and water contact angle. Moreover, the antimicrobial properties against of the electrospun membranes were assessed through direct exposure to streptococcus aureus (S. aureus) and candida albicans (C. albicans). Additionally, on the 7th day, biocompatibility and cell attachment were investigated with respect to L929 (fibroblast) and MC3T3 (pre-osteoblast) cells. Inhibition of L929 cell infiltration and the expression of osteogenic related genes including osteocalcin (OCN), alkaline phosphatase (ALP), and runt related transcription factor 2 (RUNX2) in MC3T3 cells on 7th and 14th days were also investigated.
UNASSIGNED: PCL, 2MTA, and 4MTA exhibited no statistically differences in fiber diameter distribution and tensile stress. However, as the MTA content increased, wettability and pH also increased. Due to the elevated pH, 4MTA demonstrated the lowest viability S.aureus and C.albicans. All membranes were highly biocompatibility and promoted cell attachment, while effectively preventing L929 cell infiltration. Lastly 4MTA showed increase in OCN, ALP, and RUNX2 expression on both 7th and 14th day.
UNASSIGNED: The membrane form MTA possessed characteristics essential for a novel barrier membrane.