UNASSIGNED: Persistent infections caused by Helicobacter pylori (H. pylori), which are resistant to antibiotic treatment, pose a growing global public health concern. Biofilm formation is known to be associated with persistent infections due to its role in enhancing antimicrobial resistance and the tolerance of many pathogenic bacteria.
UNASSIGNED: This study aims to evaluate the biofilm formation of clinical isolates of H. pylori and its impact on antibiotic eradication.
UNASSIGNED: The thickness, morphology, and structure of biofilms derived from nine H. pylori strains were examined using confocal laser scanning microscopy, scanning electron microscopy, and transmission electron microscopy. Subsequently, the susceptibility of both planktonic and biofilm bacteria was assessed through the determination of minimum inhibitory concentration and minimum biofilm eradication concentration for amoxicillin, clarithromycin, levofloxacin, and tetracycline.
UNASSIGNED: The results revealed varying biofilm thicknesses and densities among the strains, characterised by the presence of numerous filaments intertwining and connecting bacterial cells. Additionally, several cases exhibited susceptibility based on MIC measurements but resistance according to MBEC measurements, with MBEC indicating a higher resistance rate. Pearson Correlation analysis demonstrated a positive correlation between biofilm thickness and MBEC results (0 < r < 1), notably significant for amoxicillin (r = 0.801, P = 0.009) and tetracycline (r = 0.696, P = 0.037).
UNASSIGNED: Different strains of H. pylori exhibit variations in their capacity to release outer membrane vesicles (OMVs) and form biofilms. Biofilm formation can influence the effectiveness of amoxicillin and tetracycline in eradicating susceptible bacterial strains.

With respect to other fields, bone tissue engineering has significantly expanded in recent years, leading not only to relevant advances in biomedical applications but also to innovative perspectives. Polycaprolactone (PCL), produced in the beginning of the 1930s, is a biocompatible and biodegradable polymer. Due to its mechanical and physicochemical features, as well as being easily shapeable, PCL-based constructs can be produced with different shapes and degradation kinetics. Moreover, due to various development processes, PCL can be made as 3D scaffolds or fibres for bone tissue regeneration applications. This outstanding biopolymer is versatile because it can be modified by adding agents with antimicrobial properties, not only antibiotics/antifungals, but also metal ions or natural compounds. In addition, to ameliorate its osteoproliferative features, it can be blended with calcium phosphates. This review is an overview of the current state of our recent investigation into PCL modifications designed to impair microbial adhesive capability and, in parallel, to allow eukaryotic cell viability and integration, in comparison with previous reviews and excellent research papers. Our recent results demonstrated that the developed 3D constructs had a high interconnected porosity, and the addition of biphasic calcium phosphate improved human cell attachment and proliferation. The incorporation of alternative antimicrobials-for instance, silver and essential oils-at tuneable concentrations counteracted microbial growth and biofilm formation, without affecting eukaryotic cells\' viability. Notably, this challenging research area needs the multidisciplinary work of material scientists, biologists, and orthopaedic surgeons to determine the most suitable modifications on biomaterials to design favourable 3D scaffolds based on PCL for the targeted healing of damaged bone tissue.

In response to the global rise in antibiotic resistance and the prevalence of bacterial biofilm-related infections, the antibacterial efficacy of methanolic, ethanolic, and aqueous extracts of 18 Lamiaceae plants from Serbia was evaluated. The total coumarins and triterpenes were detected spectrophotometrically, while a microdilution assay measured their effects on bacterial growth. Additionally, the impact of these extracts was assessed on Pseudomonas aeruginosa PAO1 adhesion and invasion in human fibroblasts and biofilm formation and degradation. The alcoholic extracts had the highest phytochemical content, with Teucrium montanum and Lavandula angustifolia being the richest in coumarins and triterpenes, respectively. Gram-positive bacteria, particularly Bacillus subtilis, were more susceptible to the extracts. Hyssopus officinalis ethanolic and Sideritis scardica methanolic extracts inhibited bacterial growth the most efficiently. Although the extracts did not inhibit bacterial adhesion, most ethanolic extracts significantly reduced bacterial invasion. Origanum vulgare and H. officinalis ethanolic extracts significantly inhibited biofilm formation, while Teucrium chamaedrys extract was the most active in biofilm degradation. This study significantly contributes to the literature by examining the antibacterial activity of Lamiaceae extracts, addressing major literature gaps, and underscoring their antibacterial potential, particularly Satureja montana and O. vulgare ethanolic extracts, linking their efficacy to coumarins and triterpenes.

Dermacoccus barathri is the first reported pathogen within the Dermacoccus genus to cause a catheter-related bloodstream infection, which occurred in 2015. In this study, the complete genome assembly of Dermacoccus barathri was constructed, and the complete genome of Dermacoccus barathri FBCC-B549 consists of a single chromosome (3,137,745 bp) without plasmids. The constructed genome of D. barathri was compared with those of two closely related species within the Dermacoccus genus. D. barathri exhibited a pattern similar to Dermacoccus abyssi in terms of gene clusters and synteny analysis. Contrary to previous studies, biosynthetic gene cluster (BGC) analysis for predicting secondary metabolites revealed the presence of the LAP biosynthesis pathway in the complete genome of D. barathri, predicting the potential synthesis of the secondary metabolite plantazolicin. Furthermore, an analysis to investigate the potential pathogenicity of D. barathri did not reveal any antibiotic resistance genes; however, nine virulence factors were identified in the Virulence Factor Database (VFDB). According to these matching results in the VFDB, despite identifying a few factors involved in biofilm formation, further research is required to determine the actual impact of D. barathri on pathogenicity. The complete genome of D. barathri is expected to serve as a valuable resource for future studies on D. barathri, which currently lack sufficient genomic sequence information.

Staphylococcus aureus forms biofilms consisting of cells embedded in a matrix made of proteins, polysaccharides, lipids, and extracellular DNA (eDNA). Biofilm-associated infections are difficult to treat and can promote antibiotic resistance, resulting in negative healthcare outcomes. eDNA within the matrix contributes to the stability, growth, and immune-evasive properties of S. aureus biofilms. eDNA is released by autolysis, which is mediated by murein hydrolases that access the cell wall via membrane pores formed by holin-like proteins. The eDNA content of S. aureus biofilms varies among individual strains and is influenced by environmental conditions, including the presence of antibiotics. eDNA plays an important role in biofilm development and structure by acting as an electrostatic net that facilitates protein-cell and cell-cell interactions. Because of eDNA\'s structural importance in biofilms and its ubiquitous presence among S. aureus isolates, it is a potential target for therapeutics. Treatment of biofilms with DNase can eradicate or drastically reduce them in size. Additionally, antibodies that target DNABII proteins, which bind to and stabilize eDNA, can also disperse biofilms. This review discusses the recent literature on the release, structure, and function of eDNA in S. aureus biofilms, in addition to a discussion of potential avenues for targeting eDNA for biofilm eradication.

UNASSIGNED: Microorganisms in biofilms are particularly difficult to control because of their increased survival and antibiotic resistance. Allicin and domiphen were employed to inhibit the microbial growth and biofilm formation of Staphylococcus aureus, Escherichia coli, and Candida albicans strains.
UNASSIGNED: Broth microdilution method and checkerboard assay were conducted to determine the efficacy of allicin combined with domiphen against S. aureus, E. coli, and C. albicans. Microbial biofilm formation was measured using the crystal violet staining method and fluorescence microscopy. And the total viable count of the biofilm cells on material surface after the treatment with antimicrobial reagents was calculated with the plate count technique.
UNASSIGNED: The two drugs showed synergistic effects against the pathogens with a fractional bactericidal concentration of less than 0.38. The combination of 64 μg/mL allicin with 1 μg/mL domiphen dispersed over 50% of the biofilm mass of S. aureus, E. coli, and C. albicans. In addition, the drug combination reduced the total viable counts of E. coli and C. albicans biofilm cells on stainless steel and polyethylene surfaces by more than 102 CFU/mL.
UNASSIGNED: The combination of allicin and domiphen is an effective strategy for efficiently decreasing biofilms formation on various industrial materials surfaces.

The increasing emergence of Staphylococcus aureus as the primary causative agent of otitis externa has been noted; however, detailed information regarding the molecular characteristics of these strains in Iran remains scarce. The current study aims to investigate both genotypic and phenotypic attributes of S. aureus strains implicated in ear infections. In the present work, we analyzed 60 S. aureus strains isolated from cases of otitis externa over a period of 45 months. The resistance patterns were determined using disk diffusion and microbroth dilution methods. All S. aureus isolates were confirmed by the nucA polymerase chain reaction assay, and their biofilm production was assessed by a microtiter plate assay. Molecular characterization of the isolates was performed using the staphylococcal cassette chromosome mec, multilocus sequence typing, and staphylococcus protein A typing methods. Overall, the results indicated that 44 out of 60 S. aureus isolates (73.3 %) were methicillin-resistant Staphylococcus aureus. Resistance to mupirocin and vancomycin was observed in 13.3 % and 1.7 % of the tested isolates, respectively. Furthermore, out of the 60 S. aureus isolates, 56 strains (93.4 %) were classified as positive biofilm strains at different levels. Twelve distinct clonal lineages were identified. The vast majority of S. aureus isolates belonged to CC30/ST30-MRSA IV/t019 (41.7 %). Among the 31 strong biofilm producers, the majority (64.5 %) belonged to CC30/ST30-MRSA IV/t019 clone. Biofilm negative isolates belonged to CC22/ST22 (2 isolates), CC8/ST585 (one isolate), and CC8/ST8 (one isolate). Our result revealed that about three-quarters of PVL-positive strains belonged to CC30/ST30. Our data confirmed the presence of MSSA strains among CC30/ST30 and CC22/ST22 isolates. The mupirocin resistant isolates (n = 8) belonged to CC8/ST585-MRSA III/t713 (37.5 %), CC8/ST239-MRSA III/t030 (25 %), CC8/ST8-MRSA IV/t008 (12.5 %), CC8/ST239-MRSA III/t037 (12.5 %), and CC22/ST22-MRSA IV/t790 (12.5 %) lineages. The VRSA strain belonged to the CC8/ST8-MRSA IV/t008 lineage, carrying the vanA determinant. iMLSB phenotypes (n = 14) were distributed across different lineages, including CC30/ST30-MRSA IV/t019 (21.5 %), CC30/ST30-MSSA/t021 (21.5 %), CC22/ST22-MSSA/t005 (14.3 %), CC8/ST239-MRSA III/t030 (14.3 %), CC22/ST22-MSSA/t1869 (7.1 %), CC22/ST22-MRSA IV/t790 (7.1 %), CC8/ST239-MRSA III/t037 (7.1 %), and CC1/ST772-MRSA IV/t10795 (7.1 %). These findings highlight significant genotypic diversity and high biofilm formation among our isolates. The frequent occurrence of the CC/ST30 clone in S. aureus strains isolated from otitis externa reflects the emergence of these lineages as a predominant clone in Iran, posing a significant public health concern.

Metallic dental implants have been extensively used in clinical practice due to their superior mechanical properties, biocompatibility, and aesthetic outcomes. However, their integration with the surrounding soft tissue at the mucosal region remains challenging and can cause implant failure due to the peri-implant immune microenvironment. The soft tissue integration of dental implants can be ameliorated through different surface modifications. This review discussed and summarized the current knowledge of topography-mediated immune response and topography-mediated antibacterial activity in Ti dental implants which enhance soft tissue integration and their clinical performance. For example, nanopillar-like topographies such as spinules, and spikes showed effective antibacterial activity in human salivary biofilm which was due to the lethal stretching of bacterial membrane between the nanopillars. The key findings of this review were (I) cross-talk between surface nanotopography and soft tissue integration in which the surface nanotopography can guide the perpendicular orientation of collagen fibers into connective tissue which leads to the stability of soft tissue, (II) nanotubular array could shift the macrophage phenotype from pro-inflammatory (M1) to anti-inflammatory (M2) and manipulate the balance of osteogenesis/osteoclasia, and (III) surface nanotopography can provide specific sites for the loading of antibacterial agents and metallic nanoparticles of clinical interest functionalizing the implant surface. Silver-containing nanotubular topography significantly decreased the formation of fibrous encapsulation in per-implant soft tissue and showed synergistic antifungal and antibacterial properties. Although the Ti implants with surface nanotopography have shown promising in targeting soft tissue healing in vitro and in vivo through their immunomodulatory and antibacterial properties, however, long-term in vivo studies need to be conducted particularly in osteoporotic, and diabetic patients to ensure their desired performance with immunomodulatory and antibacterial properties. The optimization of product development is another challenging issue for its clinical translation, as the dental implant with surface nanotopography must endure implantation and operation inside the dental microenvironment. Finally, the sustainable release of metallic nanoparticles could be challenging to reduce cytotoxicity while augmenting the therapeutic effects.

暂无摘要。

Noncoding RNAs (ncRNAs) play key roles in the regulation of important pathways, including cellular growth, stress management, signaling, and biofilm formation. Sulfate-reducing bacteria (SRB) contribute to huge economic losses causing microbial-induced corrosion through biofilms on metal surfaces. To effectively combat the challenges posed by SRB, it is essential to understand their molecular mechanisms of biofilm formation. This study aimed to identify ncRNAs in the genome of a model SRB, Oleidesulfovibrio alaskensis G20 (OA G20). Three in silico approaches revealed genome-wide distribution of 37 ncRNAs excluding tRNAs in the OA G20. These ncRNAs belonged to 18 different Rfam families. This study identified riboswitches, sRNAs, RNP, and SRP. The analysis revealed that these ncRNAs could play key roles in the regulation of several pathways of biosynthesis and transport involved in biofilm formation by OA G20. Three sRNAs, Pseudomonas P10, Hammerhead type II, and sX4, which were found in OA G20, are rare and their roles have not been determined in SRB. These results suggest that applying various computational methods could enrich the results and lead to the discovery of additional novel ncRNAs, which could lead to understanding the \"rules of life of OA G20\" during biofilm formation.