In recent years, there has been a growing interest in developing portable and personal devices for measuring air quality and surrounding pollutants, partly due to the need for ventilation in the aftermath of COVID-19 situation. Moreover, the monitoring of hazardous chemical agents is a focus for ensuring compliance with safety standards and is an indispensable component in safeguarding human welfare. Air quality measurement is conducted by public institutions with high precision but costly equipment, which requires constant calibration and maintenance by highly qualified personnel for its proper operation. Such devices, used as reference stations, have a low spatial resolution since, due to their high cost, they are usually located in a few fixed places in the city or region to be studied. However, they also have a low temporal resolution, providing few samples per hour. To overcome these drawbacks and to provide people with personalized and up-to-date air quality information, a personal device (smartwatch) based on MEMS gas sensors has been developed. The methodology followed to validate the performance of the prototype was as follows: firstly, the detection capability was tested by measuring carbon dioxide and methane at different concentrations, resulting in low detection limits; secondly, several experiments were performed to test the discrimination capability against gases such as toluene, xylene, and ethylbenzene. principal component analysis of the data showed good separation and discrimination between the gases measured.

Health surveillance guides public policies, allows for the monitoring of occupational exposures that may cause health risks, and can prevent work-related diseases. The scoping review protocol herein is designed to map studies on the surveillance of occupational exposure to volatile organic compounds (VOCs) in gas stations and identify the governmental agencies and public health measures in different countries. This review protocol is based on the Joanna Briggs Institute manual and guided by the PRISMA Extension for Scoping Reviews. It includes research articles, theses, dissertations, and official documents on surveillance measures for occupational exposure to VOCs (i.e., benzene, ethylbenzene, toluene, and xylene) in gas stations from different countries. All languages and publication dates will be considered, and a spreadsheet will be used to extract and analyze qualitative and quantitative data. The final version will present the main surveillance measures implemented, responsible entities, results, challenges, limitations, and potential gaps in gas stations.

The vertical distribution of 35 volatile organic compounds (VOCs) was investigated in soil columns from two obsolete industrial sites in Eastern China. The total concentrations of ΣVOCs in surface soils (0-20 cm) were 134-1664 ng g-1. Contamination of VOCs in surface soil exhibited remarkable variability, closely related to previous production activities at the sampling sites. Additionally, the concentrations of ΣVOCs varied with increasing soil depth from 0 to 10 m. Soils at depth of 2 m showed ΣVOCs concentrations of 127-47,389 ng g-1. Among the studied VOCs, xylene was the predominant contaminant in subsoils (2 m), with concentrations ranging from n.d. to 45,400 ng g-1. Chlorinated alkanes and olefins demonstrated a greater downward migration ability compared to monoaromatic hydrocarbons, likely due to their lower hydrophobicity. As a result, this vertical distribution of VOCs led to a high ecological risk in both the surface and deep soil. Notably, the risk quotient (RQ) of xylene in subsoil (2 m, RQ up to 319) was much higher than that in surface soil. Furthermore, distinct effects of VOCs on soil microbes were observed under aerobic and anaerobic conditions. Specifically, after the 30-d incubation of xylene-contaminated soil, Ilumatobacter was enriched under aerobic condition, whereas Anaerolineaceae was enriched under anaerobic condition. Moreover, xylene contamination significantly affected methylotrophy and methanol oxidation functions for aerobic soil (t-test, p < 0.05). However, aromatic compound degradation and ammonification were significantly enhanced by xylene in anaerobic soil (t-test, p < 0.05). These findings suggest that specific VOC compound has distinct microbial ecological effects under different oxygen content conditions in soil. Therefore, when conducting soil risk assessments of VOCs, it is crucial to consider their ecological effects at different soil depths.

Xylene is the commonest clearing agent even though it is hazardous and costly. This study evaluated the clearing properties of coconut oil as an alternative cost-effective clearing agent for histological processes. Ten (10) prostate samples fixed in formalin were taken and each one was cut into 4 before randomly separating them into four groups (A, B, C and D). Tissues were subjected to ascending grades of alcohol for dehydration. Group A was cleared in xylene and Groups B, C, and D were cleared at varying times of 1hr 30mins, 3hrs, and 4hrs in coconut oil respectively before embedding, sectioning, and staining were carried out. Gross and histological features were compared. Results indicated a significant shrinkage in coconut oil-treated specimen compared with the xylene-treated specimen and only the tissues cleared in coconut oil for 4hrs were as rigid as the tissues cleared in xylene (p > 0.05). No significant difference was found in either of the sections when checked for cellular details and staining quality (p > 0.999). Coconut oil is an efficient substitute for xylene in prostate tissues with a minimum clearing time of 4hrs, as it is environmentally friendly and less expensive, but causes significant shrinkage to prostate tissue.

Xylene exposure is known to induce toxicity in hematopoietic stem and progenitor cells (HSPCs), leading to bone marrow suppression and potential leukemogenesis. However, research on the gene expression profiles associated with xylene-induced toxicity in HSPCs, and effective therapeutic interventions, remains scarce. In our study, we employed single-cell RNA sequencing to capture the transcriptomic shifts within bone marrow HSPCs both prior to and following treatment with coniferyl ferulate (CF) in a mouse model of xylene-induced hematotoxicity. Subsequently, we pinpointed CF as a targeted agent using SPR-LC/MS analysis. This enabled us to confirm the link between the gene Mgst2 and specific cellular subtypes. Our data revealed that CF significantly countered the reduction of both monocyte and neutrophil progenitor cells, which are commonly affected by xylene toxicity. Through targeted analysis, we identified Mgst2 as a direct molecular target of CF. Notably, Mgst2 is preferentially expressed in neutrophil progenitor cells and is implicated in mitochondrial metabolic processes. By selectively inhibiting Mgst2 in bone marrow, we observed amelioration of xylene-induced hematotoxic effects. In summary, our findings suggest that coniferyl ferulate can mitigate the detrimental impact of xylene on hematopoietic stem and progenitor cells by targeting Mgst2, particularly within subpopulations of neutrophil progenitors. This discovery not only advances our comprehension of the cellular response of HSPCs to xenobiotic stressors like xylene but also identifies CF and Mgst2 as potential therapeutic targets for alleviating xylene-induced hematotoxicity.

Climatic and meteorological conditions are among the factors affecting the ambient concentrations of BTEX compounds. This systematic review and meta-analysis aimed to interrogate the seasonal effect of climatic conditions on the concentrations of BTEX compounds. Three electronic bibliographic databases including Scopus, PubMed, and Web of Science were systematically searched up to November 14, 2023. The search algorithm followed PRISMA guidance and consisted of three groupings of keywords and their possible combinations. For various climatic conditions, the overall mean and 95% confidence interval (CI) of effect size related to BTEX concentrations were calculated using a random-effect model. In total, 104 articles were included for evaluation in this review. BTEX ambient concentration was higher in winter (ranging from 36 out of 79 relevant studies for xylene to 52 out of 97 relevant studies for benzene) followed by summer and autumn. For humidity conditions, the highest exposure values for BTEX were detected for rainy weather (ranging from 3 out of 5 relevant studies for toluene and xylene to 4 out of 5 relevant studies for benzene and ethyl benzene) compared to dry conditions. The pooled concentration (μg/m3) of benzene, toluene, ethyl benzene, and xylene were computed as 2.61, 7.12, 2.21, and 3.61 in spring, 2.13, 7.53, 1.61, and 2.75 in summer, 3.04, 9.59, 3.14, and 5.50 in autumn, and 3.56, 8.71, 2.35, and 3.91 in winter, respectively. Moreover, the pooled concentrations (μg/m3) of BTEX were measured as 2.98, 7.22, 1.90, and 3.03 in dry weather and 3.15, 6.30, 2.14, and 3.86 in rainy or wet weather, respectively. In most seasons, the ambient concentrations of BTEX were higher in countries with low and middle incomes and in Middle Eastern countries and East/Southeast Asia compared to those in other regions (P < 0.001). The increasing concentrations of BTEX in winter and autumn followed by the summer season and during rainy/wet weather appear to be reasonably consistent despite variations in study methods, quality, or geography. Therefore, it is recommended that more serious control measures are considered for decreasing exposure to BTEX in these climatic conditions.

BACKGROUND: Bladder cancer has been linked to several occupations that involve the use of solvents, including those used in the dry-cleaning industry.
OBJECTIVE: We evaluated exposure to solvents and risk of bladder cancer in 1182 incident cases and 1408 controls from a population-based study.
METHODS: Exposure to solvents was quantitatively assessed using a job-exposure matrix (CANJEM). Exposure to benzene, toluene and xylene often co-occur. Therefore, we created two additional sets of metrics for combined benzene, toluene and xylene (BTX) exposure: (1) CANJEM-based BTX metrics and (2) hybrid BTX metrics, using an approach that integrates the CANJEM-based BTX metrics together with lifetime occupational histories and exposure-oriented modules that captured within-job, respondent-specific details about tasks and chemicals. Adjusted odds ratios (ORs) and 95% confidence intervals (95% CI) were estimated using logistic regression.
RESULTS: Bladder cancer risks were increased among those ever exposed to benzene (OR = 1.63, 95% CI: 1.14-2.32), toluene (OR = 1.60, 95% CI: 1.06-2.43), and xylene (OR = 1.67, 95% CI: 1.13-2.48) individually. We further observed a statistically significant exposure-response relationship for cumulative BTX exposure, with a stronger association using the hybrid BTX metrics (ORQ1vsUnexposed = 1.26, 95% CI: 0.83-1.90; ORQ2vsUnexposed = 1.52, 95% CI: 1.00-2.31; ORQ3vsUnexposed = 1.88, 95% CI: 1.24-2.85; and ORQ4vsUnexposed = 2.23, 95% CI: 1.35-3.69) (p-trend=0.001) than using CANJEM-based metrics (p-trend=0.02).
CONCLUSIONS: There is limited evidence about the role of exposure to specific organic solvents, alone or in combination on the risk of developing bladder cancer. In this study, workers with increasing exposure to benzene, toluene, and xylene as a group (BTX) had a statistically significant exposure-response relationship with bladder cancer. Future evaluation of the carcinogenicity of BTX and other organic solvents, particularly concurrent exposure, on bladder cancer development is needed.

This work presents the first example of the utilization of polar ester group functionalized pillar[6]arene (P6A-C10-OAc) as a stationary phase for capillary gas chromatographic (GC) separations. The statically coated P6A-C10-OAc column showed a high column efficiency of 5393 plates/m and moderate polar nature. Its resolving capability and retention behaviors were investigated for a mixture of 20 analytes and more than a dozen isomers from apolar to polar in nature. As evidenced, the P6A-C10-OAc column achieved high-resolution separations of all the analytes and good inertness. Importantly, it exhibited distinctly advantageous performance for high resolution of the challenging isomers of xylenes, diethylbenzenes, ethyltoluenes, and halobenzenes over the commercial HP-5 (5% phenyl dimethyl polysiloxane), HP-35 (25% phenyl dimethyl polysiloxane), and PEG-20M (polyethylene glycol) columns.

The fundamental reaction pathways to the simplest dialkylsubstituted aromatics-xylenes (C6 H4 (CH3 )2 )-in high-temperature combustion flames and in low-temperature extraterrestrial environments are still unknown, but critical to understand the chemistry and molecular mass growth processes in these extreme environments. Exploiting crossed molecular beam experiments augmented by state-of-the-art electronic structure and statistical calculations, this study uncovers a previously elusive, facile gas-phase synthesis of xylenes through an isomer-selective reaction of 1-propynyl (methylethynyl, CH3 CC) with 2-methyl-1,3-butadiene (isoprene, C5 H8 ). The reaction dynamics are driven by a barrierless addition of the radical to the diene moiety of 2-methyl-1,3-butadiene followed by extensive isomerization (hydrogen shifts, cyclization) prior to unimolecular decomposition accompanied by aromatization via atomic hydrogen loss. This overall exoergic reaction affords a preparation of xylenes not only in high-temperature environments such as in combustion flames and around circumstellar envelopes of carbon-rich Asymptotic Giant Branch (AGB) stars, but also in low-temperature cold molecular clouds (10 K) and in hydrocarbon-rich atmospheres of planets and their moons such as Triton and Titan. Our study established a hitherto unknown gas-phase route to xylenes and potentially more complex, disubstituted benzenes via a single collision event highlighting the significance of an alkyl-substituted ethynyl-mediated preparation of aromatic molecules in our Universe.

UNASSIGNED: The process of decoverslipping is often required in a laboratory to review or examine an older slide which tends to fade over time, making it almost impossible to use it for research or study purposes. The sections then need to be re-stained which can only be done after removing the coverslip. The traditional method of decoverslipping using xylene is a time-consuming process. Various methods have been used in the past; however, none were found to be completely effective. Dry ice, the solid form of carbon dioxide, is an easily available, cheap cooling agent with a low freezing temperature (-78.5°C) which was evaluated for its efficacy in decoverslipping process, as an alternative to xylene.
UNASSIGNED: 64 faded haematoxylin and eosin (H&E)-stained histopathology slides were randomly selected and segregated, according to duration of year, into eight major groups. Each group was further divided into four subgroups according to the time that the slides were subjected for decoverslipping. The slides were placed on dry ice and the time was set. Once the coverslip was removed, the slides were placed in xylene to remove any residual mountant. The tissue sections were evaluated for physical disfigurement followed by re-staining with H&E to check for any change in tissue morphology.
UNASSIGNED: The mean time taken for removal of coverslip using dry ice was 35 seconds.
UNASSIGNED: This technique is easy, fast, and effective, with no tissue loss or compromise in staining quality, thereby preventing xylene toxicity and its effect on the environment.