In recent years, there has been a growing interest in developing portable and personal devices for measuring air quality and surrounding pollutants, partly due to the need for ventilation in the aftermath of COVID-19 situation. Moreover, the monitoring of hazardous chemical agents is a focus for ensuring compliance with safety standards and is an indispensable component in safeguarding human welfare. Air quality measurement is conducted by public institutions with high precision but costly equipment, which requires constant calibration and maintenance by highly qualified personnel for its proper operation. Such devices, used as reference stations, have a low spatial resolution since, due to their high cost, they are usually located in a few fixed places in the city or region to be studied. However, they also have a low temporal resolution, providing few samples per hour. To overcome these drawbacks and to provide people with personalized and up-to-date air quality information, a personal device (smartwatch) based on MEMS gas sensors has been developed. The methodology followed to validate the performance of the prototype was as follows: firstly, the detection capability was tested by measuring carbon dioxide and methane at different concentrations, resulting in low detection limits; secondly, several experiments were performed to test the discrimination capability against gases such as toluene, xylene, and ethylbenzene. principal component analysis of the data showed good separation and discrimination between the gases measured.

Health surveillance guides public policies, allows for the monitoring of occupational exposures that may cause health risks, and can prevent work-related diseases. The scoping review protocol herein is designed to map studies on the surveillance of occupational exposure to volatile organic compounds (VOCs) in gas stations and identify the governmental agencies and public health measures in different countries. This review protocol is based on the Joanna Briggs Institute manual and guided by the PRISMA Extension for Scoping Reviews. It includes research articles, theses, dissertations, and official documents on surveillance measures for occupational exposure to VOCs (i.e., benzene, ethylbenzene, toluene, and xylene) in gas stations from different countries. All languages and publication dates will be considered, and a spreadsheet will be used to extract and analyze qualitative and quantitative data. The final version will present the main surveillance measures implemented, responsible entities, results, challenges, limitations, and potential gaps in gas stations.

Xylene is the commonest clearing agent even though it is hazardous and costly. This study evaluated the clearing properties of coconut oil as an alternative cost-effective clearing agent for histological processes. Ten (10) prostate samples fixed in formalin were taken and each one was cut into 4 before randomly separating them into four groups (A, B, C and D). Tissues were subjected to ascending grades of alcohol for dehydration. Group A was cleared in xylene and Groups B, C, and D were cleared at varying times of 1hr 30mins, 3hrs, and 4hrs in coconut oil respectively before embedding, sectioning, and staining were carried out. Gross and histological features were compared. Results indicated a significant shrinkage in coconut oil-treated specimen compared with the xylene-treated specimen and only the tissues cleared in coconut oil for 4hrs were as rigid as the tissues cleared in xylene (p > 0.05). No significant difference was found in either of the sections when checked for cellular details and staining quality (p > 0.999). Coconut oil is an efficient substitute for xylene in prostate tissues with a minimum clearing time of 4hrs, as it is environmentally friendly and less expensive, but causes significant shrinkage to prostate tissue.

Xylene exposure is known to induce toxicity in hematopoietic stem and progenitor cells (HSPCs), leading to bone marrow suppression and potential leukemogenesis. However, research on the gene expression profiles associated with xylene-induced toxicity in HSPCs, and effective therapeutic interventions, remains scarce. In our study, we employed single-cell RNA sequencing to capture the transcriptomic shifts within bone marrow HSPCs both prior to and following treatment with coniferyl ferulate (CF) in a mouse model of xylene-induced hematotoxicity. Subsequently, we pinpointed CF as a targeted agent using SPR-LC/MS analysis. This enabled us to confirm the link between the gene Mgst2 and specific cellular subtypes. Our data revealed that CF significantly countered the reduction of both monocyte and neutrophil progenitor cells, which are commonly affected by xylene toxicity. Through targeted analysis, we identified Mgst2 as a direct molecular target of CF. Notably, Mgst2 is preferentially expressed in neutrophil progenitor cells and is implicated in mitochondrial metabolic processes. By selectively inhibiting Mgst2 in bone marrow, we observed amelioration of xylene-induced hematotoxic effects. In summary, our findings suggest that coniferyl ferulate can mitigate the detrimental impact of xylene on hematopoietic stem and progenitor cells by targeting Mgst2, particularly within subpopulations of neutrophil progenitors. This discovery not only advances our comprehension of the cellular response of HSPCs to xenobiotic stressors like xylene but also identifies CF and Mgst2 as potential therapeutic targets for alleviating xylene-induced hematotoxicity.

BACKGROUND: Bladder cancer has been linked to several occupations that involve the use of solvents, including those used in the dry-cleaning industry.
OBJECTIVE: We evaluated exposure to solvents and risk of bladder cancer in 1182 incident cases and 1408 controls from a population-based study.
METHODS: Exposure to solvents was quantitatively assessed using a job-exposure matrix (CANJEM). Exposure to benzene, toluene and xylene often co-occur. Therefore, we created two additional sets of metrics for combined benzene, toluene and xylene (BTX) exposure: (1) CANJEM-based BTX metrics and (2) hybrid BTX metrics, using an approach that integrates the CANJEM-based BTX metrics together with lifetime occupational histories and exposure-oriented modules that captured within-job, respondent-specific details about tasks and chemicals. Adjusted odds ratios (ORs) and 95% confidence intervals (95% CI) were estimated using logistic regression.
RESULTS: Bladder cancer risks were increased among those ever exposed to benzene (OR = 1.63, 95% CI: 1.14-2.32), toluene (OR = 1.60, 95% CI: 1.06-2.43), and xylene (OR = 1.67, 95% CI: 1.13-2.48) individually. We further observed a statistically significant exposure-response relationship for cumulative BTX exposure, with a stronger association using the hybrid BTX metrics (ORQ1vsUnexposed = 1.26, 95% CI: 0.83-1.90; ORQ2vsUnexposed = 1.52, 95% CI: 1.00-2.31; ORQ3vsUnexposed = 1.88, 95% CI: 1.24-2.85; and ORQ4vsUnexposed = 2.23, 95% CI: 1.35-3.69) (p-trend=0.001) than using CANJEM-based metrics (p-trend=0.02).
CONCLUSIONS: There is limited evidence about the role of exposure to specific organic solvents, alone or in combination on the risk of developing bladder cancer. In this study, workers with increasing exposure to benzene, toluene, and xylene as a group (BTX) had a statistically significant exposure-response relationship with bladder cancer. Future evaluation of the carcinogenicity of BTX and other organic solvents, particularly concurrent exposure, on bladder cancer development is needed.

UNASSIGNED: The process of decoverslipping is often required in a laboratory to review or examine an older slide which tends to fade over time, making it almost impossible to use it for research or study purposes. The sections then need to be re-stained which can only be done after removing the coverslip. The traditional method of decoverslipping using xylene is a time-consuming process. Various methods have been used in the past; however, none were found to be completely effective. Dry ice, the solid form of carbon dioxide, is an easily available, cheap cooling agent with a low freezing temperature (-78.5°C) which was evaluated for its efficacy in decoverslipping process, as an alternative to xylene.
UNASSIGNED: 64 faded haematoxylin and eosin (H&E)-stained histopathology slides were randomly selected and segregated, according to duration of year, into eight major groups. Each group was further divided into four subgroups according to the time that the slides were subjected for decoverslipping. The slides were placed on dry ice and the time was set. Once the coverslip was removed, the slides were placed in xylene to remove any residual mountant. The tissue sections were evaluated for physical disfigurement followed by re-staining with H&E to check for any change in tissue morphology.
UNASSIGNED: The mean time taken for removal of coverslip using dry ice was 35 seconds.
UNASSIGNED: This technique is easy, fast, and effective, with no tissue loss or compromise in staining quality, thereby preventing xylene toxicity and its effect on the environment.

In this work, a series of clinoptilolite composites decorated with carbon quantum dots (CQDs/clinoptilolite) with hierarchical pore structures was demonstrated that exhibits good photocatalytic performance for the removal of xylene. The technique for the attachment of carbon quantum dots to clinoptilolite was prepared by a hydrothermal method in this study. The structural features were confirmed by SEM, TEM, EDS, XRD, BET, XPS, and solid diffuse reflection measurements, while the degradation mechanism was investigated by adding a trapping agent into the nanocomposites. The introduction of CQDs promoted the separation of photogenerated electrons and holes as well as the generation of reactive radicals, which effectively improved the light utilization and even increased the degradation rate of xylene by 73% at the optimal state. The photocatalytic test was conducted under a different dwell time, catalyst dosage, initial concentration, and illumination intensity. The results showed that the degradation rate of xylene by the CQDs/clinoptilolite catalyst reached 97.4% under the optimal reaction conditions (the catalyst was Catalyst No. 2, the residence time was 90 s, the initial concentration was 2.5 g/m3, the light intensity was three lamps for irradiation, and the catalyst dosage was 0.05 g). In addition, the degradation efficiency of the CQDs/clinoptilolite photocatalyst still reached 78% after eight consecutive catalytic regeneration cycles. This work sheds new light on the degradation of xylene.

UNASSIGNED: The aim of the study is to compare the dissolution effectiveness of xylene, thyme oil, and orange oil on three different endodontic sealers.
UNASSIGNED: Standardized stainless steel molds were used to prepare 210 samples (70 for each endodontic sealer). The samples were divided into three groups based on sealers. Three experimental groups with 20 samples each were immersed in organic solvents. One control group of 10 samples was immersed in distilled water. Each group was further subdivided into two subgroups based on immersion time (2 and 10 min). Inferential statistics included one-way ANOVA, post hoc Tukey, and paired t-test.
UNASSIGNED: Thyme showed significantly more dissolution capacity at 10 min compared to 2 min in dissolving AH Plus sealer whereas this difference was nonsignificant for Roekoseal and MTA Fillapex. Orange oil showed significantly more dissolution at 10 min compared to 2 min in dissolving AH Plus sealer and Roekoseal whereas this difference was nonsignificant concerning MTA Fillapex. Xylene showed significantly more dissolution capacity at 10 min compared to 2 min in dissolving AH Plus sealer, Roekoseal, and MTA Fillapex.
UNASSIGNED: Among the three solvents, xylene showed the highest dissolution of all three sealers. Orange oil was superior to thyme oil in dissolving the sealers. All the sealers showed more dissolution in all the solvents at 10 min compared to 2 min.

Xylene has the potential to cause nervous system disturbances since it is a lipophilic substance with high affinity for lipid-rich tissue, such as the brain. Involvement in the spinal cord, especially long segmental spinal cord lesions that permeate almost the entire cervical and thoracic spinal cord, is extremely rare. We report two cases of occupational exposure to excessive xylene, both of which presented with severe and rapidly progressive numbness and weakness in the limbs that, more importantly, led to poor outcomes: one died and the other was left severely disabled. In both, spinal magnetic resonance imaging showed long segmental lesions in the cervicothoracic spinal cord. These findings may provide some insights into the effects of xylene as an isolated agent on the spinal cord injury.

With the development of the chemical industry, benzene, toluene, ethylbenzene, and xylene (BTEX) have gradually become the major indoor air pollutants. Various gas treatment techniques are widely used to prevent the physical and mental health hazards of BTEX in semi-enclosed spaces. Chlorine dioxide (ClO2) is an alternative to chlorine as a secondary disinfectant with a strong oxidation ability, a wide range of action, and no carcinogenic effects. In addition, ClO2 has a unique permeability which allows it to eliminate volatile contaminants from the source. However, little attention has been paid to the removal of BTEX by ClO2, due to the difficulty of removing BTEX in semi-enclosed areas and the lack of testing methods for the reaction intermediates. Therefore, this study explored the performance of ClO2 advanced oxidation technology on both liquid and gaseous benzene, toluene, o-xylene, and m-xylene. The results showed that ClO2 was efficient in the removal of BTEX. The byproducts were detected by gas chromatography-mass spectrometry (GC-MS) and the reaction mechanism was speculated using the ab initio molecular orbital calculations method. The results demonstrated that ClO2 could remove the BTEX from the water and the air without causing secondary pollution.