This study investigates nanostructured titanium surfaces (Ti2 spikes) that promote the viability of osteoblasts and fibroblasts and prevent bacterial colonisation. Helium ion irradiation was adopted to produce nanometric-sized cones on titanium. Human osteoblasts (hFOB) and human gingiva fibroblasts (hGF) were used for analysis. A viability and a cytotoxicity assay were conducted to evaluate the lactate dehydrogenase (LDH) activity and assess cell damage in Ti2 spikes compared to titanium discs with a sandblasted and acid-etched (Ti2 SLA) surface. The antibacterial activity was investigated against Escherichia coli, Streptococcus mutans, Fusobacterium nucleatum, and Porphyromonas gingivalis. In the course of the cultivation, both hGF and hFOB demonstrated significantly reduced viability on the Ti2 spikes surface. hGF cells exhibited a slight but significant increase in LDH release. In contrast, hFOB showed reduced cytotoxicity on this surface. On the Ti2 spikes surface, hGF cells exhibited a significant reduction in gene expression of VCL, Src-1, and ITGα5. However, the integrin subunits ITGα1 and ITGα3 showed upregulation on the Ti2 spikes surface. The Ti2 spikes surface significantly increased the expression of almost all osteogenic markers. The results of conventional culturing demonstrated a statistically significant decrease in the number of viable cells for S. mutans, F. nucleaum, and greater quantities of P. gingivalis on Ti2 spikes surface compared to control. However, no such reduction was detected for E. coli. The long-term success of implants relies on establishing and maintaining hard and soft peri-implant tissues. Ti2 spikes represent a novel and promising approach to enhance osseointegration and optimize biocompatibility.

UNASSIGNED: Keloids are excessive fibroproliferative diseases that are caused by abnormal wound healing. The anti-proliferative activity of Physalis angulata compounds has potential as a keloid therapeutic agent. This study aimed to observe the effects of P. angulata on fibroblast viability and collagen type I, tissue inhibitor of metalloproteinase 1 (TIMP-1), and plasminogen activator inhibitor 1 (PAI-1) levels in human keloid fibroblasts.
UNASSIGNED: We conducted an experimental study of P. angulata ethanol extract on three primary human keloid fibroblast 3 passage cultures with four replications. Fibroblast viability was measured using the MTT assay after incubation with 3, 5, and 10 µg/mL P. angulata. Concentrations of P. angulata used to observe effects on TIMP-1, PAI-1, and collagen type I levels were 10%, 20%, 30%, and 40% of inhibitory concentration 50 (IC50). The levels of collagen type I, TIMP-1, and PAI-1 were measured by ELISA. Mean comparisons between multiple treatment groups were analyzed using one-way ANOVA followed by post-hoc analysis.
UNASSIGNED: The 10 µg/mL P. angulata group had significantly lower fibroblast viability than the control group (p<0.05) with an IC50 6.3 µg/mL. The collagen type I level of 10% IC50 (0.63 µg/mL) P. angulata group was lower than control (12.910 vs 47.866 ng/mL) (p=0.042). Level of TIMP-1 in 40% IC50 (2.51 µg/mL) P. angulata group was lower than control (5.350 vs 9.972 ng/mL) (p=0.043). There was no significant difference in the PAI-1 levels.
UNASSIGNED: This study showed the inhibitory effect of 10 µg/mL P. angulata extract on keloid fibroblast viability, with an IC50 of 6.3 µg/mL. This study also showed collagen type-1 and TIMP-1 inhibition, but not PAI-1 inhibition, after P. angulate treatment.

UNASSIGNED: Multiple irrigation solutions are used in orthopedic surgeries although there are limited studies on their lasting effects on human tissues. The purpose of this work was to investigate the cytotoxic effects of the irrigation solutions Bacitracin, Clorpactin (sodium oxychlorosene), Irrisept (0.05% chlorhexidine gluconate), and Bactisure (ethanol 1%, acetic acid 0.6%, sodium acetate 0.2%, benzalkonium chloride 0.013%, and water) on 3D cultures of human fibroblasts.
UNASSIGNED: Two independent experiments with 6 replicates were performed for the following conditions: Control (saline), bacitracin, Clorpactin, Irrisept, and Bactisure. Human fibroblast cell sheets were exposed to these solutions (1 or 2 min), followed by three washes with warm saline. Cell sheets were then cultured for additional 5- and 7-day posttreatment. Cell viability was measured using the alamarBlue (AB) assay. The more cytotoxic the irrigant, the lower the AB reduction.
UNASSIGNED: For 1-min exposure time, significant differences in AB reduction were noted in Clorpactin, Irrisept, and Bactisure groups compared to control at both 5 days (Clorpactin p = 0.0003, Irrisept p = 7.31 × 10-15, Bactisure p = 6.86 × 10-14) and 7 days posttreatment (all groups p < 0.0001). The results were similar in the 2-min exposure groups. Bacitracin-treated fibroblasts displayed no significant difference at all measurement times compared to control.
UNASSIGNED: Impacts of irrigation solution exposure on cell viability were varied. Irrisept and Bactisure showed the highest cell toxicity even after a brief exposure (1 min), while bacitracin and Clor-pactin exposure showed smaller impacts on cell viability as compared to saline controls. This in vitro study provided insight into the effects of the irrigants on human cells and provides the groundwork essential to move to in vivo studies. Our findings raised the concern that some irrigation solutions may have negative impacts on wound healing and healthy cellular response.

Impaired wound healing is a severe complication of sufferers, related to prolonged wound closure, a high infection rate, and eventually disabilities of organs. To aid resolve this issue, we developed the electrospun polyvinyl alcohol and chitosan (PVA/CS) nanofibrous scaffold-loaded flaxseed extract. The scaffold containing 10 wt% of the extract indicated a three-dimensional cross-network with a nano-scale diameter (257 ± 37 nm) and smooth surface. Also, the relevant analyses confirmed high water absorption, porosity, and wettability of the scaffold. Fourier-transform infrared (FTIR), degradation, and mechanical studies revealed the intact presence and loading of the extract into the scaffold, the complete degradation over 48 h, and a high tensile elastic modulus. Besides, the advanced scaffold displayed remarkable anti-oxidant and could inhibit the growth of both Gram-positive and negative bacteria compared to the free PVA/CS scaffold. Desired fibroblast viability and blood compatibility of flaxseed-loaded scaffold endorsed the biocompatibility for wound zones. The in vitro studies showed that the flaxseed-loaded scaffold resulted in an accelerated wound healing process and 100 % closure of the scratched area within 48 h. The results obtained reveal that the flaxseed-loaded PVA/CS electrospun scaffold could be effectively applied for wound healing promotion.

Chitosan nanofiber has a highly uniform structure of 20-50 nm in diameter and shows high dispersibility in water due to its submicron size and high surface-to-volume ratio. The stacked nanofibers film is useful for breathability because it has a gap with a size of several tens of nm or more. However, the chemical bonds between the nanofibers cannot be broken during use. In this study, the thin films were obtained by filtration of chitosan nanofibers and 3-glycidoxypropyltrimethoxysilane (GPTMS) mixture. The addition of GPTMS changed the wettability, mechanical property and stability in water of the thin films. Bacitracin zinc salt (BZ) has been used for the localized dermatological medicines and loaded in the films. BZ interacted electrostatically with the thin films matrix and the release of BZ was controlled by the amount of GPTMS. A higher released amount of BZ showed higher antibacterial effects toward S. aureus. The film was also tested their toxicity by L929 fibroblasts. The release of less than 11.9 μg of BZ showed antibacterial effects, but were not toxic for fibroblast cells.

The aim of this study was to develop the potential tissue engineering applications of d-glucosamine (GlcN) immobilized onto the surface of a biodegradable matrix in order to induce a desired biological effect at biointerfaces. Thus, for sample preparation we used a novel multistep physicochemical approach. In the first step the poly(lactic acid) (PLA) films were exposed to a low pressure plasma in air atmosphere, followed by radical graft copolymerization with acrylic acid to yield a carboxyl-functionalized spacer layer on the PLA surface. The carboxyl groups were then coupled to GlcN molecules via the carbodiimide chemistry. The developed surfaces were characterized by X-ray Photoelectron Spectroscopy (XPS), Contact angle measurements and Atomic Force Microscopy (AFM). A preliminary study on the proliferation of fibroblasts on the developed surfaces was performed using the NIH/3T3 cell line.