BACKGROUND: The aim of Part II of this two-part study is to describe and analyze the association of various aspects and measurements related to the morphometry of the skull and craniocervical region to CM/SM status of Pomeranians, by means of computed tomography (CT) and magnetic resonance imaging (MRI).
METHODS: Prospectively, Pomeranians were included that underwent both CT and MRI studies of the head and cervicothoracic vertebral column. For those cases where qualitative classifications differed between observers, the experienced observer re-evaluated the studies and decided on a final classification that was used for further analysis. For quantitative measurements, the means of the observers\' measurements were used for analysis.
RESULTS: Among statistically significant differences in measurements, we found that dogs with SM had a significantly shorter clivus length based on both MRI (p = 0.01) and CT measurements (p = 0.01), and a significantly smaller caudal cranial fossa area based on both MRI (p = 0.02) and CT measurements (p = 0.02).
CONCLUSIONS: Significant morphometrical differences were identified between dogs with or without CM/SM. The findings in this study add to those already described in other breeds and provide further insight into factors that may play a role in the pathogenesis of CM/SM in Pomeranians.

UNASSIGNED: To identify the correlation between thrombosis and atherosclerosis in systemic lupus erythematosus (SLE) patients with antiphospholipid antibodies (aPLs) (SLE/aPLs) through high-resolution magnetic resonance imaging (HR-MRI) of the carotid artery.
UNASSIGNED: A single-center, cross-sectional study was conducted. We collected consecutive patients with SLE/aPLs and healthy controls who underwent carotid HR-MRI examinations. The morphometric characteristics of the common carotid artery (CCA), internal carotid artery (ICA), external carotid artery (ECA), and carotid bulb (Sinus) were measured, and the differences in morphometric parameters between different groups were analyzed.
UNASSIGNED: A total of 144 carotid arteries were analyzed. Compared with the control group, the wall area, wall thickness (WT and WTmax), and normalized wall index of CCA, ICA, ECA, and Sinus were increased in patients with SLE/aPLs, and the total vascular area (TVA) of CCA, ICA, and Sinus, and the bifurcation angle (BIFA) of ICA-ECA were also increased. A negative lupus anticoagulant (LAC) (with or without positive anticardiolipin antibody (aCL) or anti-β2glycoprotein antibody (aβ2GPI)) contributed to illustrating lower increased TVA and thickened vessel walls of CCA and ICA in SLE/aPLs patients without thrombotic events. Logistic regression analysis showed that WTmaxSinus and WTmaxGlobal were independent risk factors for thrombotic events in SLE/aPLs patients. The receiver operator characteristic curve showed that the cut-off value of WTmaxSinus was 2.855 mm, and WTmaxGlobal was 3.370 mm.
UNASSIGNED: HR-MRI ensures the complete and accurate measurement of carotid morphometric parameters. Compared with the control group, the carotid artery in patients with SLE/aPLs is mainly characterized by diffusely thickened vessel walls, and the patients with thrombotic events showed additional higher vascular area of CCA and ICA, and BIFA of ICA-ECA without significant change in lumen area. The carotid arteries of SLE/aPLs patients with thrombotic events exhibited significant vessel wall thickening in all segments except ECA compared to those without thrombotic events. LAC-negative and non-thrombotic events distinguish relatively early atherosclerosis in the carotid arteries in patients with SLE/aPLs. Patients with SLE/aPLs that possess circumscribed thickened carotid vessel walls (>3.370 mm), particularly thickened at the Sinus (>2.855 mm), may require management strategies for the risk of thrombotic events.

OBJECTIVE: Ponticulus Posticus, atlantooccipital ligament ossification-induced anomaly, surrounds the vertebral artery and the first cervical nerve root. It is believed to wrap around the first cervical nerve root and the vertebral artery, causing compression. We hypothesized that it would also reduce the diameter of the vertebral artery.
METHODS: Between January 1, 2022, and December 31, 2022, cervical spine CT scans taken for any reason were retrospectively reviewed. The images of 1365 patients suitable for evaluation were evaluated by two expert radiologists in 3 dimensions. Among patients with PP, those who underwent cervical angiography were identified for vertebral artery diameter measurement.
RESULTS: The average age of the 1365 individuals included in the study (732 males, 633 females) was 55.78 (± 18.85) with an age range of 1-96. Among this group, PP was detected in 288 individuals, resulting in a total prevalence of 21.1%. Right and left vertebral artery diameters were significantly lower in patients with complete PP compared to the absent group (p < 0,001, p < 0,001, respectively). Additionally, it was observed that width and height diameters and artery diameters were positively correlated in patients with Complete PP.
CONCLUSIONS: Ponticulus posticus can cause vertebrobasilar insufficiency by reducing the diameter of the vertebral artery. Therefore, imaging and detailed evaluation of this region are important in symptomatic patients.

BACKGROUND: The maxillary sinus is a pyramid-shaped cavity with varying shapes, sizes, and capacities. Its dimensions grow gradually and develop until early adulthood. Anatomical knowledge of the maxillary sinus is essential to understanding sinonasal disorders, planning surgical procedures and preventing complications. Awareness of the sinus\'s proximity to critical structures helps avoid injuries during surgery. The European, Korean, and Sri Lankan population study parameters show varying results and do not necessarily apply to the Indian population. The standard morphometric data of the maxillary sinus is scanty in the Indian population. The study aimed to determine the volume and morphometry of the maxillary sinus along with gender differences in the Eastern population of the Indian.
METHODS: A retrospective cross-sectional study was conducted using cone beam computed tomography data of maxillary sinuses of 100 normal individuals. The data were analysed after the three-dimensional reconstruction of digital imaging and communications in medicine (DICOM) images with the help of DICOM to print and Geomagic freeform software in the Anatomy department. The different linear morphometric variables and volume of the maxillary sinus were studied. SPSS version 27.0. was utilised for statistical analyses.
RESULTS: The mean values of Antero-posterior diameter, Transverse diameter, Craniocaudal diameters, the height of ostium from the floor and volume of the maxillary sinus in males on the right side are 36.61 mm, 20.7 mm, 40.31 mm, 26.02 mm and 16055.24 mm³ and on the left side are 37.17 mm, 20.17 mm, 40.73 mm, 26.91 mm and 15712.66 mm³ whereas in females the values on the right side are 38.10 mm, 21.56 mm, 38.96 mm, 25.81 mm and 14687.78 mm³ and on left side are 38.23 mm, 21.53 mm, 38.48 mm, 25.28 mm and 14203.13 mm3 respectively. The side-to-side parameter differences were non-significant within the male and female groups, respectively. The females had significantly (p < 0.05) larger transverse diameters than males in both the right and left maxillary sinuses. The males tend to have a slightly larger mean craniocaudal diameter than females, but the difference was found statistically significant (p < 0.05) only in the left maxillary sinus. The gender differentiation based on the measured parameters of bilateral maxillary sinus accuracy rate was 89.4% in males and 61.8% in females.
CONCLUSIONS: These parameters serve as a standard or reference point, allowing radiologists and surgeons to compare individual patient scans to population averages and aid in better clinical outcomes. The mean values of different parameters of the maxillary sinus may be utilised to differentiate various suspected sinus pathologies, which is helpful for functional endoscopic sinus surgery. Gender differentiation can be done more accurately by forensic experts using Maxillary sinus transverse diameter bilaterally, followed by craniocaudal diameter of the left side sinus for predicting the gender of an unknown maxilla.

This study describes an unusual case of multiple myeloma that progressed to anaplastic multiple myeloma in the pleural fluid. The Wright-stained cytospin of the pleural fluid showed a predominant population of mononuclear plasma cells with pleomorphic nuclei, characterized by both small and large nuclei, which is typical of anaplastic multiple myeloma. However, there were also more binuclear plasma cells with pleomorphic nuclei. Morphometric analysis showed that the mean nuclear length was 1.9-fold and 2.3-fold higher in the large nuclei compared to the small nuclei for the mononuclear plasma cells and binuclear plasma cells, respectively (p<0.001). The patient received B cell maturation antigen chimeric antigen receptor T cell (CAR-T) therapy for relapsed disease, with a significant reduction of the serum monoclonal paraprotein level at day 51 post-therapy. Pathologists should be aware that pleomorphic binuclear plasma cells can be part of the morphologic spectrum in anaplastic multiple myeloma.

BACKGROUND: The current study, which delves into proximal tibia morphometric parameters in a Greek sample, not only analyzes whether specific linear distance ratios are consistent but also paves the way for a potential novel metric system for knee arthroplasty imaging studies using constant ratios. These findings could have significant implications for future enlarged research and clinical practice.
METHODS: A total of 38 dried tibiae were evaluated by two independent investigators. The following distances were measured with a digital Vernier sliding caliper: (1) the mediolateral distance of the proximal surface (A), (2) the anteroposterior distance of the proximal surface (B), (3) The longitudinal length of the bone (C), (4) the line connecting the anterior margin of the proximal surface with the highest peak of the tibia tuberosity (D), (5) the depth of the proximal margin of the medial articular facet (AF) (medial plateau) (E) and (6) the depth of the proximal margin of the lateral AF (lateral plateau) (F).
RESULTS: The A, B, C, D, E, and F mean distances were 71.3 mm, 47.4 mm, 340.2 mm, 37.1 mm, 42 mm, and 35.9 mm. Reliability analysis for each observer on all measurements revealed an interclass correlation (ICC) score of 0.975 (observer 1) and 0.971 (observer 2). The ratio A/B was 1.5, A/C was a constant 0.2, and D/C was 0.1. The ratio E/F was 1.2. The six measurements (A-F) showed excellent inter-observer reliability (all ICC values > 0.990).
CONCLUSIONS: The study established constant ratios of the studied linear distances around the proximal tibia. Considering these ratios, asymmetrical tibial components in knee arthroplasty seem to replicate the native anatomy more closely. Furthermore, the distance from the anterior margin of the proximal surface to the tibial tuberosity peak, constituting one-tenth of the longitudinal length of the tibia, shows promise as a metric system for imaging studies, especially in assessing lesions around tibial components.

OBJECTIVE: To develop and validate an open-source deep learning model for automatically quantifying scapular and glenoid morphology using CT images of normal subjects and patients with glenohumeral osteoarthritis.
METHODS: First, we used deep learning to segment the scapula from CT images and then to identify the location of 13 landmarks on the scapula, 9 of them to establish a coordinate system unaffected by osteoarthritis-related changes, and the remaining 4 landmarks on the glenoid cavity to determine the glenoid size and orientation in this scapular coordinate system. The glenoid version, glenoid inclination, critical shoulder angle, glenopolar angle, glenoid height, and glenoid width were subsequently measured in this coordinate system. A 5-fold cross-validation was performed to evaluate the performance of this approach on 60 normal/non-osteoarthritic and 56 pathological/osteoarthritic scapulae.
RESULTS: The Dice similarity coefficient between manual and automatic scapular segmentations exceeded 0.97 in both normal and pathological cases. The average error in automatic scapular and glenoid landmark positioning ranged between 1 and 2.5 mm and was comparable between the automatic method and human raters. The automatic method provided acceptable estimates of glenoid version (R2 = 0.95), glenoid inclination (R2 = 0.93), critical shoulder angle (R2 = 0.95), glenopolar angle (R2 = 0.90), glenoid height (R2 = 0.88) and width (R2 = 0.94). However, a significant difference was found for glenoid inclination between manual and automatic measurements (p < 0.001).
CONCLUSIONS: This open-source deep learning model enables the automatic quantification of scapular and glenoid morphology from CT scans of patients with glenohumeral osteoarthritis, with sufficient accuracy for clinical use.

In this work, we analyzed the morphology and genetic structure of Teucrium montanum, T. capitatum and their hybrid T. × rohlenae from three syntopic populations. A morphometric study showed that the parents and their hybrids exhibited continuous morphological variation, with the hybrid positioned exactly between the parents. Genetic analysis revealed that plants morphologically identified as T. × rohlenae are fertile hybrids that produce hybrid swarms dominated by later-generation hybrids. This suggests that introgression, rather than speciation, is the more likely outcome of hybridization between these plant species. The extent and direction of gene flow between the two species differed markedly between the three syntopic localities. At the Trilj locality, it was clearly unidirectional, with T. capitatum playing the dominant role. At the Sićevo locality, gene flow was slightly asymmetric, favoring the genetic background of T. capitatum, while at the Sliven site, it was completely asymmetric in the opposite direction. The extreme case of unidirectional gene flow was observed at the Trilj locality where plants morphologically identified as T. montanum could not be genetically distinguished from T. capitatum. This suggests that interspecific hybridization occurred long ago, leading to introgression and cryptic hybrids, blurring of species boundaries and generating evolutionary noise.

Morphometry is fundamental for studying and correlating neuronal morphology with brain functions. With increasing computational power, it is possible to extract morphometric characteristics automatically, including features such as length, volume, and number of neuron branches. However, to the best of our knowledge, there is no mapping of morphometric tools yet. In this context, we conducted a systematic search and review to identify and analyze tools within the scope of neuron analysis. Thus, the work followed a well-defined protocol and sought to answer the following research questions: What open-source tools are available for neuronal morphometric analysis? What morphometric characteristics are extracted by these tools? For this, aiming for greater robustness and coverage, the study was based on the paper analysis as well as the study of documentation and tests with the tools available in repositories. We analyzed 1,586 papers and mapped 23 tools, where NeuroM, L-Measure, and NeuroMorphoVis extract the most features. Furthermore, we contribute to the body of knowledge with the unprecedented presentation of 150 unique morphometric features whose terminologies were categorized and standardized. Overall, the study contributes to advancing the understanding of the complex mechanisms underlying the brain.

OBJECTIVE: To assist in surgical planning in endoscopic approaches, we analyzed the morphometric measurements of the superior orbital fissure (SOF) and optic canal (OC) by three-dimensional multislice computed tomography (3D MDCT) and evaluated them according to age, gender, and lateralization.
METHODS: The study analyzed 219 MDCT images (114 women, 105 men) from individuals aged 18-90. Measurements of SOF and OC were performed on 3D MDCT images in the axial plane and with 3D-Slicer software.
RESULTS: The distance between the infraorbital foramen and the anterior entrance of the maxillary sinus (CBW) (p < 0.001), the distance between the CBW and the lateral point of the SOF (p = 0.001), and the Angle 1 (p = 0.028) were higher in women than in men. While the SOF length and on 3D the SOF width were higher in women than men (p < 0.001 and (p = 0.001, respectively), the lateral wall length OC was higher in men than women (p = 0.045). According to SOF classification, SOF length was highest in type II and lowest in type VIII (p = 0.025), SOF width was highest in type I and lowest in type VI (p < 0.001). No significant difference was found based on age groups and lateralization in all parameters.
CONCLUSIONS: We found that as the SOF width increased, the SOF length also increased, and there was a statistically strong positive correlation. These findings can contribute to a more effective and safe operation by improving and updating surgeons\' knowledge about safe distances to SOF in endoscopic procedures from a 3D MDCT perspective.