BACKGROUND: Metallic and elastomeric ligatures are widely used in orthodontics to secure the archwire within the bracket slots, but elastomeric ligatures have traditionally been associated with increased microbial colonization, which could adversely affect periodontal health.
OBJECTIVE: This systematic review compares the periodontal effects of elastomeric and steel ligatures used for orthodontic fixed appliances.
METHODS: Unrestricted literature search of 7 databases (MEDLINE, Scopus, Web of Science, Embase, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, and Virtual Health Library) up to July 2023 were performed for randomized / non-randomized clinical studies on humans comparing the two ligation methods during fixed-appliance therapy. After duplicate study selection, data extraction, and risk-of-bias assessment with the Risk of Bias (RoB) 2 or the Risk Of Bias In Non-randomized Studies - of Interventions (ROBINS-I) tool, random-effects meta-analyses of Mean Differences (MD) or Standardized Mean Differences (SMD) and their 95% confidence intervals (CIs) were carried out, followed by assessment of certainty of existing evidence with the Grades of Recommendation, Assessment, Development, and Evaluation (GRADE) approach.
RESULTS: A total of 11 studies (3 randomized / 8 non-randomized) with 354 patients (mean age 14.7 years and 42% male) were included. No statistically significant differences were seen for plaque index (5 studies; SMD = 0.48; 95% CI = -0.03 to 1.00; P = 0.07), gingival index (2 studies; MD = 0.01; 95% CI = -0.14 to 0.16; P = 0.89), probing pocket depth (2 studies; MD = 0; 95% CI = -0.17 to 0.16; P = 0.97), or Streptococcus mutans counts (4 studies; SMD = 0.40; 95% CI=-0.41 to 1.20; P = 0.21). Elastomeric ligatures were associated with moderately increased total bacterial load (3 studies; SMD = 0.43; 95% CI = 0.10 to 0.76; P = 0.03). Confidence in these estimates was low in all instances due to the inclusion of non-randomized studies with high risk of bias.
CONCLUSIONS: Existing low quality evidence indicates that ligature method does not seem to influence the periodontal health during fixed treatment, even if elastomeric ligatures are associated with a moderate increase of bacterial load.
BACKGROUND: PROSPERO (CRD42023444383).

OBJECTIVE: Fixed orthodontic appliances may increase the risk for caries and white spot lesions. The aim of this retrospective study was to determine the long-term associations between both in orthodontic patients.
METHODS: 103 patients aged 36.6 ± 6.5 years whose fixed appliance orthodontic treatment had finished at least 15 years ago were included. Current clinical data and photographs (T3), panoramic x-ray and photographs from before treatment (T0), after debonding (T1) and at 2-year follow-up (T2) were available. Parameters of interest were dentine caries, \"Missing/Filled Teeth\" (MFT), \"White Spot Lesion\" (WSL) index and \"Periodontal Screening and Recording\" index (PSR; T3 only).
RESULTS: At T0, 30.4% had no caries experience decreasing to 25.6%, 22.4% and 6.8% at T1, T2 and T3 resp. The median MFT (95% CI) at T0, T1, T2 and T3 was 2 (1;3), 3 (2;4), 3 (2;4) and 7 (6;9) resp. increasing significantly at each time point (p < 0.001 each); 30.1% had WSL at debonding. Patients with caries experience at T0 had a 2.4-fold increased risk of WSL at debonding. Dentine caries, caries experience and WSL at T1 were significantly associated with incident caries at T2, but not at T3. PSR at T3 had a significant association with previous caries incidence and WSL.
CONCLUSIONS: Caries experience prior to orthodontic treatment may constitute a risk indicator for WSL, and caries experience and WSL at its end for caries incidence in the near term.
CONCLUSIONS: Present caries and WSL may help identifying orthodontic patients with special need for prevention and counselling.

Orthodontic treatments, while essential for achieving optimal oral health, present challenges in infection control due to the propensity for bacterial adhesion and biofilm formation on orthodontic appliances. Silver-coated orthodontic materials have emerged as a promising solution, leveraging the potent antimicrobial properties of silver nanoparticles (AgNPs). Antibacterial coatings are used in orthodontics to prevent the formation of bacterial biofilms. This systematic review evaluated the literature on antimicrobial silver coatings on fixed orthodontic appliances, including archwires, brackets, and microimplants. Two evaluators, working independently, rigorously conducted a comprehensive search of various databases, including PubMed, PubMed Central, Embase, Scopus and Web of Science. This systematic review comprehensively examined in vitro studies investigating the antimicrobial efficacy of silver-coated orthodontic archwires, brackets, and microimplants. The review registered in PROSPERO CRD42024509189 synthesized findings from 18 diverse studies, revealing consistent and significant reductions in bacterial adhesion, biofilm formation, and colony counts with the incorporation of AgNPs. Key studies demonstrated the effectiveness of silver-coated archwires and brackets against common oral bacteria, such as Streptococcus mutans and Staphylococcus aureus. Microimplants coated with AgNPs also exhibited notable antimicrobial activity against a range of microorganisms. The systematic review revealed potential mechanisms underlying these antimicrobial effects, highlighted implications for infection prevention in orthodontic practice, and suggested future research avenues. Despite some study heterogeneity and limitations, the collective evidence supports the potential of silver-coated orthodontic materials in mitigating bacterial complications, emphasizing their relevance in advancing infection control measures in orthodontics.

UNASSIGNED: This study aimed to explore the effects of removable aligners and fixed appliances on the supragingival bacterial communities in adult female patients undergoing orthodontic treatment.
UNASSIGNED: Supragingival plaque samples from 48 female individuals underwent microbiome analysis (16S rRNA gene sequencing) using PacBio Sequel sequencing. The study included 13 adults without orthodontic treatment needs as the control group (Group C), and 35 patients with comparable initial orthodontic conditions who received treatment at a university clinic in Beijing, China. The treatment involved either traditional fixed brackets (Group B, n = 17) or Invisalign® aligners (Group AT, n = 18). Bioinformatics methods were used for data analysis.
UNASSIGNED: From the 48 plaque samples, a total of 334,961 valid reads were obtained, averaging 6,978 sequences per sample. The 16S rDNA sequences were classified into 25,727 amplicon sequence variants (ASVs). Significant variances in alpha and beta diversity among the groups were noted. Group B microbiome exhibited an increased presence of Gram-negative bacteria. At the phylum level, Actinobacteriota was significantly more prevalent in Group C samples, while Bacteroidota was enriched in Group B samples. Family-level relative abundance analysis showed a notable increase in Saccharibacteria (formerly TM7) and Prevotellaceae in Group B. Genus-level analysis revealed a significant rise in Lautropia in Group AT. Fixed orthodontic appliances were linked to oral microbiome changes, notably an enhanced relative abundance of anaerobes, including periodontal pathogens.
UNASSIGNED: The observation points to the impact of orthodontic appliance on the oral microbial community, highlighting the difference between traditional braces (Group B) and clear aligners (Group AT)in terms of the predominance of anaerobic and gram negative bacteria. This emphasizes the importance of considering the microbiological effects when choosing orthodontic appliance and underscores the need for tailored oral hygiene practices for individuals undergoing these treatments. This research might provide insights that could assist in the development of innovative cleaning techniques and antibacterial materials.

BACKGROUND: We evaluated anxiety, pain, and oral-health-related quality of life in individuals treated with conventional fixed appliances (Group A) and clear aligners (Group B) for moderate malocclusion during the initial phase of orthodontic treatment.
METHODS: Sixty individuals, separated into Group A (n = 30) and Group B (n = 30), were included in the study. They completed the Anxiety Levels, Oral Health Impact Profile-14, and Oral Health Related Quality of Life - United Kingdom/Surveys after the application of attachments on days 0 (T1), 10 (T10), and 20 (T20). Their pain levels were evaluated with the Visual Analogue Scale on days 0, 2, and 6 in the 2nd and 6th hours and on the 1st, 3rd, 7th, 14th, and 21st days.
RESULTS: Per the VAS questionnaire, pain levels in the 2nd hour, 6th hour, 1st day, and 3rd day were significantly lower in Group B than in Group A. In the OHIP-14 survey results, the comparison between Group A and Group B showed a significant difference only on the 1st day. The STAI and OHRQoL-UK survey results did not differ significantly between the groups.
CONCLUSIONS: We found no significant difference between the two groups in terms of anxiety levels, and pain among individuals in Group A was higher than in Group B only at the beginning of the treatment. No significant differences were observed in terms of individuals\' quality of life.
BACKGROUND: NCT06133296 (retrospectively registered)- Registration Date:15/11/2023.

OBJECTIVE: Besides correcting malocclusions, another main objective of orthodontic treatment is to improve patients\' oral health-related quality of life (OHRQoL). This study aimed to assess changes in OHRQoL of children within the first six months of orthodontic therapy with fixed orthodontic appliances.
METHODS: 85 patients aged 11 to 14 years requiring fixed orthodontic appliance therapy were included. The children completed the German version of the Child Perceptions Questionnaire (CPQ-G-11-14) before (T0), 1 month (T1) and 6 months (T2) after the start of orthodontic treatment. The type of malocclusion was categorized according to the Index of Orthodontic Treatment Need (IOTN).
RESULTS: The initial type of malocclusion affected the children\'s OHRQoL, whereas gender and age did not. The IOTN dental health component (DHC) had a significant impact on the CPQ score (median CPQ of 15.00 for the group DHC 4 vs. 22.50 for DHC 5, p = 0.032). The onset of orthodontic treatment initially affected the CPQ domains \"Oral symptoms\" and \"Functional limitations, with a change versus baseline of 2.00 (p = 0.001), but improved again after 6 months. Regression analysis demonstrated that children with an IOTN DHC 5 malocclusion experienced a greater impact on their ORHQoL, as indicated by a CPQ score 7.35 points higher than that of children with an IOTN DHC 4 malocclusion (p = 0.015).
CONCLUSIONS: At the beginning of orthodontic treatment, the OHRQoL slightly worsens, probably due to the discomfort and appearance of the appliances. However, 6 months after the start of orthodontic treatment, OHRQoL improved again in patients with severe malocclusion (IOTN 4 and 5), and approached baseline values.
CONCLUSIONS: The results help the clinician to better understand specific aspects of oral health that may be affected by different malocclusions, thereby improving the child\'s satisfaction and overall quality of life.

BACKGROUND: Orthodontic treatment presents challenges with plaque accumulation around brackets, archwires, and elastics, leading to retained plaque and gingival inflammation. Conventional toothbrushing may not be enough, requiring additional oral hygiene aids like interproximal brushes, dental flosses, and water flossers. Limited research exists on comparing water flossing and interdental flossing in orthodontic patients. Therefore, this study aims to assess their effectiveness in maintaining oral hygiene during active orthodontic treatment.
METHODS: A single-blind, randomized, parallel clinical study recruited orthodontic patients with full-mouth brackets and archwires. Thirty participants were randomly assigned to either water jet flossing or interdental flossing groups. All participants were instructed to brush twice daily with a provided toothbrush and toothpaste and use the assigned intervention once daily at night. Clinical measures, including the Gingival Bleeding Index (BI), Plaque Index (PI), and Gingival Index (GI), were recorded at baseline and day 14. Descriptive statistics and statistical tests were performed using SPSS software.
RESULTS: The water jet flossing group demonstrated a slightly higher, albeit non-significant, benefit in plaque removal (median difference of 6.79%%, P = 0.279) and bleeding reduction (median difference of 5.21%%, P = 0.172) compared to the interdental flossing group after two weeks. Both groups showed significant reductions in gingival bleeding index and plaque index from baseline to the 2-week follow-up. The interdental flossing group had median mean percentage differences of 16.13%% (plaque index) and 23.57% (gingival bleeding index), while the water jet flossing group had median percentage differences of 21.87% (plaque index) and 32.29% (gingival bleeding index). No significant changes in gingival index grades were observed in either group.
CONCLUSIONS: Both water jet flossing and interdental flossing were effective in reducing plaque accumulation and gingival bleeding among orthodontic patients. While no significant differences were found between the two methods, water jet flossing showed a potential advantage. Further research is needed to validate its effectiveness, assess long-term impact, and understand its benefits for orthodontic patients.

OBJECTIVE: To evaluate the accuracy of a semi-automatic 3D digital setup process in predicting the orthodontic treatment outcome achieved by labial fixed appliances.
METHODS: Twenty-five adult patients (18 to 24 years old) with class I malocclusion and moderate crowding were prospectively enrolled and received treatment on both jaws through the straight-wire technique. Prior to treatment commencement, a semi-automatic digital setup simulating the predicted treatment outcome was performed for each patient through Orthoanalyzer software (3Shape®, Copenhagen, Denmark) to obtain the prediction model. This was compared to the final outcome model through 3D superimposition methods. Metric variables and inspection of color-coded distance maps were used to detect how accurately the digital setup predicts the actual treatment outcome.
RESULTS: The mean absolute distances (MAD) between the superimposed dental arches of the predicted and the final models were: 0.77 ± 0.13 mm following superimposition on the palate, 0.52 ± 0.06 mm following superimposition on the maxillary dental arch, and 0.55 ± 0.15 mm following superimposition on the mandibular dental arch. The MAD at the palatal reference area was 0.09 ± 0.04 mm. Visualization of color-coded distance maps indicated that the digital setup accurately predicted the final teeth position in a few cases. Almost half of the cases had posteriorly wider upper and lower dental arches and palatally/lingually positioned or inclined anterior teeth, whereas the rest still showed errors within 2-3 mm, distributed over the entire dental arches with no distinct pattern.
CONCLUSIONS: The accuracy of semi-automatic prediction of the labial fixed appliance treatment outcome in Class I cases with moderate crowding is not yet sufficient. While average measures showed deviations less than 1 mm, examination of individual color-coded distance maps revealed significant disparities between the simulated and the actual results.

BACKGROUND: There is an increasing interest in information on the effects of orthodontic aligners on the oral health-related quality of life (OHRQoL) of people.
OBJECTIVE: To compare the impact of orthodontic aligners versus conventional fixed appliances on OHRQoL, using a validated tool and controlling for sociodemographic and clinical variables.
METHODS: Sixty-one individuals participated in this study. Group 1 (G1) consisted of 33 individuals under treatment with orthodontic aligners and Group 2 (G2) comprised 28 individuals under treatment with conventional fixed appliances. OHRQoL was evaluated with the Oral Health Impact Profile (OHIP-14) in which 14 items are distributed across seven dimensions: functional limitation, physical pain, psychological discomfort, physical disability, psychological disability, social disability, and handicap. The higher the score, the more negative is the perception of the individual regarding his/her OHRQoL. Descriptive statistics, Mann-Whitney test, and Poisson regression were performed. Effect Size (ES) and Minimal Clinically Important Difference (MCID) were also determined.
RESULTS: Participants\' mean age was 30.69 years. Individuals in G1 had a significantly lower score for physical pain and the total score of OHIP-14 compared to individuals in G2 (p < 0.05). The ES was large (ES = 0.74) for physical pain and moderate (ES = 0.46) for the total score. The ES was moderate for physical disability (ES = 0.50). The difference between groups for physical pain (1.30) and for physical disability (0.90) was greater than the MCID (0.87 and 0.88, respectively). Poisson regression showed that G2 individuals showed a score for physical pain 1.39 times higher than those of G1 in the adjusted model (OR = 1.39, [1.03-1.89], p = 0.031).
CONCLUSIONS: Those under treatment with orthodontic aligners have a more positive perception of OHRQoL compared to those wearing fixed appliances.

BACKGROUND: CAD/CAM (computer-aided design/computer-aided manufacturing) fixed retainers (FRs) as an alternative to multistranded FRs to maintain orthodontic treatment outcome.
OBJECTIVE: The primary aim was to compare CAD/CAM versus conventional multistranded FRs in terms of stability until 2 years. Secondary outcomes were failure rates, patient satisfaction, and cost-minimization.
METHODS: 2-arm parallel, two-centre randomized controlled trial.
METHODS: Patients were randomized to CAD/CAM or conventional FRs in both arches, in a 1:1 ratio and blocks of four. Allocation concealment was secured by using sequentially numbered envelopes. Patients were blinded. FRs were bonded at the end of treatment, and patients were recalled after 12 and 24 months. First-time retainer failures were recorded and digital impressions were taken. Arch widths and lengths, as well as Little\'s Irregularity Index (LII), were measured. Additionally, patients answered satisfaction questionnaires. Linear mixed models were applied for measurements and patient satisfaction. Survival analyses were estimated with Kaplan-Meier curves, along with Cox-regression modelling. Cost-minimization analysis was undertaken.
RESULTS: One hundred and eighty-one patients were randomized (98 in Centre 1, and 83 in Centre 2): 90 in CAD/CAM and 91 in conventional group. One hundred and fifty three patients attended T24 follow-up. There were no significant differences in LII and arch dimensions between groups for failure-free patients. Within 24 months, 34% maxillary CAD/CAM FRs and 38% maxillary conventional FRs failed, along with 42% mandibular CAD/CAM FRs and 40% mandibular conventional FRs, with no significant difference in survival between groups (hazard ratios conventional to CAD/CAM: maxillary arch: 1.20 [P = 0.46], mandibular arch: 0.98 [P = 0.94]). There were no significant differences in patient satisfaction between groups. No harms were observed. Cost-minimization analysis showed that CAD/CAM FRs were slightly cheaper than conventional FRs.
CONCLUSIONS: There were no clinically significant differences in LII, arch widths, and lengths between CAD/CAM and conventional FRs after 24 months. There were no differences in failures and patient satisfaction between groups. CAD/CAM FRs were slightly cheaper than conventional FRs.
BACKGROUND: ClinicalTrials.gov NCT04389879.