The use of synthetic dyes in the textile industry is mostly non-degradable, which are carcinogenic and pollute the environment severely. Natural dyes have gained significant attention recently due to their potential to mitigate the environmental challenges associated with synthetic colorants. This investigation is centered around the extraction of natural dyes sourced from mahogany trees and the exploration of environmentally friendly techniques for coloring jute fabric. The derived dyes were procured from distinct segments of the mahogany tree: namely, the bark, fruits, and wood remnants. Employing an aqueous extraction methodology, inherent coloring agents were meticulously separated and subsequently applied to jute fabric subsequent to appropriate mordanting employing a variety of mordant categories. An exhaustive assessment encompassing wash, light, rubbing, and perspiration resistance was conducted on jute fabric that was subjected to dyeing using three distinct variants of mahogany tree-derived dyes. Notably, jute fabric treated with wood wastage-sourced dye exhibited commendable to exceptional resistance properties. The efficacy of this dyeing process was further substantiated through diverse characterization techniques, inclusive of scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR), which unequivocally affirmed the successful bonding of mahogany-derived dyes onto the surface of the jute fabric. The textile industry, particularly dyeing operations that use large, designed colors and synthetic chemicals, is wreaking havoc on the sea-going environment by dumping emissions directly into bodies of water. Synthetic colors are commonly used to dye jute fabric, which has major health and environmental consequences. Therefore, concerning the environmental challenges, the dyeing of jute fabric using naturally extracted dyes from mahogany trees can be a suitable alternative to synthetic dyes in the textile industry.

Using natural dyes in dyeing industries becomes an alternative to synthetic dyes, which are known to contain harmful chemicals that can pose risks to the environment and human health. This study involves the extraction of yellow dye from Cassia alata flower petals, optimization of the extraction process using an ultrasonic bath (40 KHz and an input power of 500), ultrasonic probe (390 W, 455 W, 520 W, 585 W, and 650 W), and conventional heating (heating mantle with 30 °C, 40 °C, 50 °C, 60 °C, and 70 °C), characterization of the dye, as well as dyeing (cotton, silk, and leather) without using a mordant. The extracted yellow dye was further evaluated to determine its antibacterial activity against skin bacteria. Dye extraction optimization using UV-Visible spectrophotometric analysis revealed that the maximum yellow color in methanol extract (287 and 479 nm) was obtained at 50 °C for 45 min using ultrasonic water bath extraction, followed by the ultrasonic probe and direct heating. Based on the FTIR spectra, it is evident that OH is present at approximately 3300 cm-1, while CH stretches at around 2900 cm-1. A characteristic peak at 1608 cm-1 bears a striking similarity to anthraquinonoid-based compounds. Also, using the ultrasonic water bath dyeing technique at 50 °C for 45 min, the yellow color of cotton, silk, and leather was dyed optimally. Due to effective color removal after two washings with boiling soap liquid, the dyed cotton and silk fabric displayed good washing and rubbing fastness. Regarding antibacterial activity, the dye was highly active against all pathogens after extraction in methanol. The maximum inhibition was observed against Pseudomonas sp. with a MIC value of 1.56 mg/ml.

The application of plant dyes in the textile industry has been very limited due to their limited sources, incomplete color space, and narrow color gamut, etc. Therefore, studies of the color properties and color gamut of natural dyes and the corresponding dyeing processes are essential for completing the color space of natural dyes and their application. In this study, water extract from the bark of Phellodendron amurense (P. amurense) was used as a dye. Dyeing properties, color gamut, and color evaluation of dyed cotton fabrics were studied, and optimal dyeing conditions were obtained. The results showed that the optimal dyeing process was pre-mordanting with liquor ratio at 1:50, P. amurense dye concentration at 5.2 g/L, mordant concentration (aluminum potassium sulfate) at 5 g/L, dyeing temperature at 70 °C, dyeing time of 30 min, mordanting time of 15 min, and pH 5. Through the optimization of the dyeing process, a maximum color gamut range was obtained with lightness L* value from 74.33 to 91.23, a* value from -0.89 to 2.96, b* value from 4.62 to 34.08, chroma C* value from 5.49 to 34.09, and hue angle h° value from 57.35° to 91.57°. Colors from light yellow to dark yellow were obtained, among which 12 colors were identified according to the Pantone Matching Systems. The color fastness against soap-washing, rubbing, and sunlight on the dyed cotton fabrics all reached grade 3 level or above, further expanding the applicability of natural dyes.

The aerial parts of the Argy Worm Wood (AWW) plant have been used in different Chinese foods as a colorant and a taste enhancer for a long time. Despite its application as a food colorant, it has rarely been considered for the coloration of textiles. Keeping in mind the variation in color strength due to the change in phytochemical contents by seasonal change and other variables, the extraction of AWW aerial parts was optimized using the Taguchi method. Optimization was performed on the basis of total phytochemical contents (phenols, flavonoids, and tannins) in the extracted solutions. For this purpose, two different solvent systems, namely sodium hydroxide/water (NaOH/water) and ethanol/water (EtOH/water), were applied through a simple aqueous extraction method at varying levels of solvent concentration, and extraction temperature and duration. Maximum phytochemicals yield of 21.96% was obtained using NaOH/water system with 9 g/L NaOH/water at 85 °C for 20 min and 25.5% with 75% aqueous ethanol at 85 °C for 40 min. Optimized extracts were characterized by UV-Vis and FTIR spectrophotometry, which showed the presence of multiple phytochemicals in the extracts. The dyeing temperature and time were also optimized. Dyed cotton fabrics showed medium to high colorfastness to washing and excellent antibacterial and UV radiation absorption properties. The effect of pre-mordanting with salts of iron and copper was also studied on the color fastness properties. Cotton fabrics dyed with two different solvent system extracts displayed various shades of brown with NaOH/water, and green with aqueous ethanol with and without pre-mordanting. The present study provides the textile industry with a promising source of functional bio-colorant and a value-adding approach for the AWW plant industry.

Bixa orellana is a small tree known for its red, oil-soluble pigment contained in the seed coat that is used as a natural dye and food coloring. In this study, we assembled and characterized the complete chloroplast genome of B. orellana as a resource for future genetic studies. With a total length of 159,825 bp, the chloroplast genome comprised of a large single-copy (LSC) region of 89,476 bp, a small single-copy (SSC) region of 19,617 bp, and two inverted repeat (IR) regions of 25,356 bp each. A total of 127 genes were predicted, consisting of 83 protein-coding genes, 36 tRNA genes, and 8 rRNA genes. Phylogenetic analysis confirmed the position of B. orellana within the order Malvales.

Recently, natural dyes have a widening scope in various traditional and advanced applications due to their eco-friendly environment. However, improved dyeability of natural dyes still remains a challenging task. This research was aimed to achieve multi-objective wool with improved dyeability using bio-nano-mordant composed of m-Trans-glutaminase, m-TGase, and bentonite nanoclay. Wool fiber was treated through sonochemical method using different concentrations of m-TGase and bentonite. The surface morphology of wool fabric samples was examined by field emission-scanning electron microscopy (FESEM), and Fourier transform Infrared Radiation (FTIR). Further, wool samples treated at different conditions were applied to madder for dyeability examination. The optimum conditions of color coordinates, color strength, K/S, and washing fastness of madder on treated wool fabric with m-TGase and bentonite, were also examined. The results revealed well-made interactions among m-TGase, bentonite, and wool fibers. In addition, surface morphology was strongly influenced by variations in enzyme concentrations so that extra addition of m-TGase lead to clear damage scales or less cuticle surface in SEM images. Moreover, the results showed that the value of K/S for treated wool samples was better than untreated samples. Indeed, amongst all, 5% concentrations of bio-nano-mordant for m-TGase and bentonite have the most constructive K/S values. Similarly, results of ΔE and antibacterial investigations also confirmed its superiority.