In the industrial sector, vegetable residual materials have received attention in the production of bio-colorant for textile dyeing. The current research endeavor is centered on investigating the possibility of using sugar beet leaves as a natural source of dye for the purpose of dyeing cotton fabrics. Different extraction methods were utilized to isolate the bio-colorant present in sugar beet residual material, and the most favorable colorant yield was obtained using a 5% methanolic KOH solution. For optimal dyeing results, the cotton fabric performed dyeing for a duration of 45 min at a temperature of 60 °C, using a salt solution concentration of 6 g/100 mL and 50 mL of the extracted dye solution. Characterization of dye using Fourier transform infrared spectroscopy analysis confirmed the presence of quercetin in the leaf extract. For the creation of a range of color variations, mordants that were chemical in nature, such as tannic acid, iron sulfate, potassium dichromate, and copper sulfate, as well as mordants that were bio-based, such as onion peel, pomegranate peel, henna, golden shower bark, and turmeric, were employed in harmony. In comparison, the utilization of bio-mordants resulted in darker shades that exhibited enhanced color intensity and superior color fastness properties with the value of 4-5 for wash, 4 for wet rubbing, 4-5 for dry rubbing, and 4-5 for light. The findings of this study hold significant value in terms of ecofriendly waste management and contribute to advancements in the industrial sector by utilizing waste residual materials as a natural source of colorants.

This article focuses on comparing the characteristics of cotton fabric dyed with Diospyros mollis extract (DME) solution and that of cotton fabric dyed with the reactive dye. The parameters of the cotton fabric after dyeing with both types of dyes were assessed, including color strength (K/S), structural morphology, infrared spectrum, antibacterial properties, UV resistance, color fastness to washing, rubbing, light, moisture absorption, breathability, and wastewater indices. The obtained results show that the K/S value of cotton fabric dyed with DME solution is slightly lower than that of cotton fabric dyed with the reactive dye, 18.52 and 19.36, respectively. The cotton fabric dyed with the reactive dye does not exhibit antibacterial activity against Escherichia coli and Staphylococcus aureus, whereas the antibacterial effectiveness against these bacteria for cotton fabric dyed with DME solution is 99.99 %. The UV protection capability of cotton fabric dyed with DME solution is superior to cotton fabric dyed with the reactive dye. The BOD/COD ratio of wastewater from the dyeing process with DME is higher than that of the reactive dye, with values of 0.70 and 0.32, respectively. The findings of this study indicate the superior ability of using DME solution as compared to the reactive dye, which is promising as a natural dye for fabric in medical applications.

This study investigates the optimization of fabric dyeing using natural dyes extracted from Clitoria ternatea, Cudrania javanensis, and Hibiscus sabdarifa by enhancing the mordanting process with citric acid. The principle of adding citric acid is as a crosslinker agent between cotton fabric and dye through an esterification reaction. A central composite design (CCD) of the response surface methodology (RSM) is employed to optimize parameters. Three mordanting variations and dyeing parameters, such as temperature and time, are considered. Results indicate that pre-mordanting yields superior outcomes, with optimal temperature and time at 65 °C and 82 min, respectively. Cotton fabric dyed with Cudrania javanensis and citric acid exhibits the highest color durability. This study successfully demonstrates the effectiveness of pre-mordanting, meta-mordanting, and post-mordanting methods with optimized conditions for achieving optimal coloring outcomes, particularly highlighting the efficacy of citric acid as a crosslinking agent.

This study aimed to fabricate and characterize a novel colorimetric indicator designed to detect ammonia (NH3) and monitor meat freshness. The sensing platform was constructed using electrospun nanofibers made from polylactic acid (PLA), which were then impregnated with anthocyanins as a natural pH-sensitive dye, extracted from red cabbage. This research involved investigating the relationship between the various concentrations of anthocyanins and the colorimetric platform\'s efficiency when exposed to ammonia vapor. Scanning electron microscope (SEM) results were used to examine the morphology and structure of the nanofiber mats before and after the dip-coating process. The study also delved into the selectivity of the indicator when exposed to various volatile organic compounds (VOCs) and their stability under extreme humidity levels. Furthermore, the platform\'s sensitivity was evaluated as it encountered ammonia (NH3) in concentrations ranging from 1 to 100 ppm, with varying dye concentrations. The developed indicator demonstrated an exceptional detection limit of 1 ppm of MH3 within just 30 min, making it highly sensitive to subtle changes in gas concentration. The indicator proved effective in assessing meat freshness by detecting spoilage levels in beef over time. It reliably identified spoilage after 10 h and 7 days, corresponding to bacterial growth thresholds (107 CFU/mL), both at room temperature and in refrigerated environments, respectively. With its simple visual detection mechanism, the platform offered a straightforward and user-friendly solution for consumers and industry professionals alike to monitor packaged beef freshness, enhancing food safety and quality assurance.

Biocolourants could be a sustainable option for dyes that require fossil-based chemicals in their synthesis. We studied the in vitro toxicity of anthraquinone aglycone extract obtained from Cortinarius sanguineus fungus and compared it to the toxicity of its two main components, emodin and previously studied dermocybin. Cell viability, cytotoxicity, and oxidative stress responses in HepG2 liver and THP-1 immune cell lines were studied along with skin sensitisation. In addition, genotoxicity was studied with comet assay in HepG2 cells. Cellular viability was determined by MTT, propidium iodide, and lactate dehydrogenase assays, which showed that the highest doses of both the aglycone extract and emodin affected the viability. However, the effect did not occur in all of the used assays. Notably, after both exposures, a dose-dependent increase in oxidative stress factors was observed in both cell lines as measured by MitoSOX and dihydroethidium assays. C. sanguineus extract was not genotoxic in the comet assay. Importantly, both emodin and the extract activated the skin sensitisation pathway in the KeratinoSens assay, suggesting that they can induce allergy in humans. As emodin has shown cytotoxic and skin-sensitising effects, it is possible that the adverse effects caused by the extract are also mediated by it since it is the main component present in the fungus.

Nowadays, secondary raw materials (SRM) obtained from plant matrices are of great interest for circular economy, suitable for sustainable measures to reduce environmental impact. This work focused on the extraction, characterization and quantification of compounds obtained from leaves and fruits of the Sicilian sumac, Rhus coriaria L. and their application as natural dyes on textile fibres. Extractions were performed with Extractor Naviglio®, maceration and ultrasound assisted methods and food-grade solvents (aqueous and hydroalcoholic) to evaluate the yields for dye compounds. The presence of colouring molecules was evaluated by UV-Vis spectrophotometer, and the extracts selected for colouring were quantified and characterized by LC-MS. The results showed that Extractor Naviglio® achieved the best extraction yield, and the ethanol-water mixture extracts had a higher amount of total phenolic compounds (TPC) and a higher content of total colouring compounds (TCC). These extracts were selected for subsequent applications as dyes for linen, cotton and wool. The chemical profile of selected extracts was rich in compounds such as gallotannin and anthocyanin class. Fibre dyeing was verified by recording CIELAB colouring coordinates. The results suggest that the dyes obtained from R. coriaria can be of great interest for artisanal and industrial processes, in accordance with environmental sustainability.

The present study investigates the usage of a novel natural dye derived from red algae of Morocco in dye-sensitized solar cells (DSSCs) for the first time. The main pigments responsible for sensitizing the semiconductor TiO2 coatings in the red algae were identified as phycoerythrin, carotenoid, and chlorophyll. The efficiency of a DSSC made from red algae was compared to that of a solar cell made from chlorophyll alone. The photovoltaic performance of the DSSC was evaluated through photocurrent density to photovoltage (J-V) characteristic analysis, and the efficiency was found to be 0.93%. To gain insights into its behavior, the absorbance and photoluminescence in a broad range were studied. Both absorbance and photoluminescence exhibited a broad-spectrum range. Additionally, electronic properties, such as HOMO, LUMO, energy gap, and chemical reactivity parameters, were studied using density functional theory (DFT) calculations.

The production of antibacterial colored textiles using nanomaterials (NMs) has become an ideal goal from both a research and industrial perspective. In this study, the clean synthesis and characterization of silver nanoparticles (AgNPs) on polyamide fabrics were performed using mullein extract for the first time. Natural dyes were extracted from mullein leaves using an ultrasonic method, with an optimal amount of 15 g/L. The synthesized AgNPs in different ratios of mullein extract and Ag ions were analyzed (using UV-visible spectroscopy) and dynamic light scattering (DLS). It was found that AgNPs synthesized with a ratio of 1:4 of mullein extract: to Ag ions had a diameter of 85 nm. The active site groups of the synthesized AgNPs were characterized using Fourier transform infrared spectroscopy (FT-IR). Nylon fabrics dyed with different ratios of mullein extract and Ag ions exhibited acceptable color strength values (K/S) of 3.36. Furthermore, the reduction in bacterial growth for dyed fabrics improved with an increase in the ratio of Ag ions, with a 100% reduction observed for a sample dyed with mullein extract: Ag ions at a ratio of 1:4. Overall, this method offers a simple, low-cost, and compatible process with environment without the consumption of any chemicals to producing nylon with acceptable antibacterial and dyeing properties.

This research aims to optimize the silk and wool dyeing process using natural dyes from Bixa orellana (annatto) through response surface methodology. Central composite design experiments highlight the significant enhancement of color outcomes achieved through microwave treatment. For silk, the optimal conditions (80 °C for 40 min) with annatto extract yield a color strength (K/S) of 17.8588, while wool achieves a K/S of 7.5329. Introducing eco-friendly bio-mordants, such as pomegranate peel and red sumac tannins, enhances color strength. Pre-dyeing treatments with 2% red sumac, 1.5% pomegranate peel, and weld flower extracts for silk produce high color strength, with K/S values of 16.4063, 16.3784, and 12.1658, respectively. Post-dyeing, the K/S values increase to 40.1178, 17.4779, and 21.6494. Wool yarn exhibits similar improvements, with pre-dyeing K/S values of 13.1353, 13.5060, and 16.3232, escalating to 10.5892, 15.3141, and 23.4850 post-dyeing. Furthermore, this research underscores improved colorfastness properties, including notable enhancements in light, wash, and rubbing fastness for both silk fabric and wool yarn. These findings underscore the efficacy of the proposed sustainable dyeing methods, offering valuable insights for eco-friendly textile production.

Indigo quality is determined by its indigotin content. Another quality indicator is colour. For an evaluation of species, indigo samples from Indigofera tinctoria, Indigofera suffruticosa, Indigofera arrecta, Persicaria tinctoria, Strobilanthes cusia and Wrightia laevis cultivated in Austria and China were visually classified and analysed spectrophotometrically and using a L*a*b* measuring device. In addition to a standardised hot-extraction method without lime, some samples were extracted simulating traditional methods at ambient temperatures using lime. The highest indigotin contents were achieved with Indigofera arrecta (55%, Austria) and Strobilanthes cusia (56%, China). There were no statistically significant differences between the indigo extraction yields of the species cultivated in Austria, but Indigofera arrecta and Persicaria tinctoria had statistically significantly higher indigotin extraction yields than Indigofera tinctoria and Indigofera suffruticosa. From the species extracted in China, Strobilanthes cusia showed higher values in all parameters than Indigofera tinctoria, Indigofera suffruticosa and Wrightia laevis. Compared with the standardised method, the method simulating local practice yielded more indigo but had a lower indigotin content; the indigotin extraction yields did not differ greatly. L*a*b* values enabled precise estimations of the indigotin content, making it an interesting option for quality control, as inexpensive, easy-to-handle L*a*b* measuring instruments have become available.