OBJECTIVE: To retrospectively evaluate peri-implant bone loss and health status associated with the long-term use of laser surface-treated implants.
METHODS: For control study, total of 23 titanium ASTM F136 grade 23 implants were placed in the edentulous molar area of the mandible. When the Implant Stability Quotient (ISQ) ≥ 70 and insertion torque value (ITV) ≥ 35-50 Ncm at the insertion site, an immediate provisional restoration was connected to the implant within a week after surgery. The definitive restorations were placed 2 months after surgery for all implants. 13 implants were immediately loaded, while 10 implants were conventionally loaded. For comparative study, Radiographs were taken from third years for and then annually for the subsequent eight years to monitor marginal bone loss.
RESULTS: After eight year of implant installation, the average change in vertical bone loss was 0.009 mm (P < 0.001), while the average change in horizontal bone loss 8 year after implant placement was 0.026 mm (P < 0.001). The mean marginal bone loss was < 0.2 mm on average.
CONCLUSIONS: In this retrospective study, laser-treated implants exhibit a low rate of bone absorption around the implants.

UNASSIGNED: Applying autologous growth factors and diode laser in periodontal therapy enhances fibroblast-mediated new attachment and osteoblastic differentiation. Hence, this study compared and evaluated the effectiveness of concentrated growth factor (CGF) alone and with diode laser application in managing intrabony periodontal defects.
UNASSIGNED: Ten patients with stage III periodontitis were included in this study. All the patients underwent an open flap debridement (OFD) procedure followed by CGF membrane placement in the intrabony defect in site A, whereas, in site B, after OFD, all the patients underwent diode laser irradiation before CGF membrane placement. Plaque and gingival bleeding index (PI & GBI), PPD, and clinical attachment level (CAL) were evaluated at baseline and 3 and 6 months later. Bone fill (BF), BF%, bone crest changes (BCC), and BCC% were assessed radiographically at six months postoperatively.
UNASSIGNED: Significant reductions in PI and GBI scores, probing pocket depth (PPD), and CAL gain were observed at both sites 3 and 6 months from baseline. A significant reduction in PPD and CAL gain was noted between sites, which were higher in site B than in site A with a mean difference of 0.70±0.05 mm and 1.30±0.18 mm, 0.90±1.89 mm at 3 and 6 months, respectively. Radiographic measurement showed better BF, BF%, BCC, and BCC% at both sites at six months, which were higher at site B than at site A but statistically insignificant.
UNASSIGNED: The combination of CGF and diode laser application has demonstrated successful and promising results in terms of regeneration, improving the clinical and radiographic parameters.

OBJECTIVE: To evaluate the efficacy and safety of holmium laser enucleation of the prostate (HoLEP) in a large prospective cohort of patients with benign prostatic hyperplasia (BPH) through systematic follow-up at a single institution.
METHODS: Clinical outcomes were analyzed between August 2008 and June 2022. Patients were followed-up at 2 weeks, 3 months and 6 months postoperatively.
RESULTS: A total of 3,000 patients (mean age, 69.6±7.7 years) underwent HoLEP. Baseline total International Prostate Symptom Score (IPSS) was 19.3±7.7 and maximum flow rate (Qmax) was 9.4±4.8 mL/s. Mean total prostate volume was 67.7±3.4 mL. Total operation time was 60.7±31.5 minutes, and catheterization time was 1.0 days (range, 1.0-1.0 days). At 6 months postoperatively, the total IPSS decreased to 6.6±5.8 and Qmax increased to 22.2±11.3 mL/s. Complications at 6 months postoperatively included stress urinary incontinence (SUI) in 36 patients (1.9%), urgency urinary incontinence (UUI) in 25 (1.3%), bladder neck contracture (BNC) requiring transurethral incision (TUI) in 16 (0.5%), and urethral stricture in 29 (1.0%). Eleven patients (0.4%) with prostatic fossa stones required stone removal. Sixty-one patients (2.0%) required secondary surgery (transurethral coagulation, 16 [0.5%]; TUI for BNC, 16 [0.5%]; stone removal for prostatic fossa stones, 11 [0.4%]; and endoscopic internal urethrotomy for urethral stricture, 18 [0.6%]).
CONCLUSIONS: Mid-term follow-up results after HoLEP in BPH patients showed excellent efficacy and low complication rates. Unlike previous reports, the incidence of SUI and UUI after HoLEP was low, but the occurrence of de novo stone formation in prostatic fossa was notable.

BACKGROUND: Due to its non-invasive and widely applicable features, photodynamic therapy (PDT) has been a prominent treatment approach against cancer in recent years. However, its widespread application in clinical practice is limited by the dark toxicity of photosensitizers and insufficient penetration of light sources. This study assessed the anticancer effects of a novel photosensitizer 5-(4-amino-phenyl)-10,15,20-triphenylporphyrin with diethylene-triaminopentaacetic acid (ATPP-DTPA)-mediated PDT (hereinafter referred to as ATPP-PDT) under the irradiation of a 450-nm blue laser on colorectal cancer (CRC) in vivo and in vitro.
METHODS: After 450-nm blue laser-mediated ATPP-PDT and the traditional photosensitizer 5-aminolevulinic acid (5-ALA)-PDT treatment, cell viability was detected through Cell Counting Kit-8 (CCK-8) and 5-ethynyl-2\'-deoxyuridine (EdU) assays. Reactive oxygen species (ROS) generation was quantified by flow cytometry and fluorescence microscopy. Western blotting and transcriptome RNA sequencing and functional experiments were used to evaluate cell apoptosis and its potential mechanism. Anti-tumor experiment in vivo was performed in nude mice with subcutaneous tumors.
RESULTS: ATPP-DTPA had a marvelous absorption in the blue spectrum. Compared with 5-ALA, ATPP-DTPA could achieve significant killing effects at a lower dose. Owing to generating an excessive amount of ROS, 450-nm blue laser-mediated PDT based on ATPP-DTPA resulted in evident growth inhibition and apoptosis in CRC cells in vitro. After transcriptome RNA sequencing and functional experiments, p38 MAPK signaling pathway was confirmed to be involved in the regulation of apoptosis induced by 450-nm blue laser-mediated ATPP-PDT. Additionally, animal studies using xenograft model confirmed that ATPP-PDT had excellent anti-tumor effect and reasonable biosafety in vivo.
CONCLUSIONS: PDT mediated by 450-nm blue laser combined with ATPP-DTPA may be a novel and effective method for the treatment of CRC.

BACKGROUND: Dentinal hypersensitivity is a brief and painful oral condition that is characterized by an abrupt shooting sensation. Stimulation occurs when hot, cold, sweet, or sour food comes into contact with exposed dentinal tubules. The present study used a scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDX) to investigate the efficacy of Er: YAG, 810 nm diode LASER, and NovaMin Technology in obstructing dentinal tubules.
METHODS: We extracted the outer layers of 30 human teeth to expose the tubules and then treated the surfaces with 17% ethylenediaminetetraacetic acid (EDTA) to create an etched effect. Three cohorts were created from the portions. Group A was subjected to the application of Erbium:Yttrium-Aluminum-Garnet (Er: YAG) laser with a power output of 2W in the non-contact mode for 1 minute. Group B was subjected to the application of an 810nm diode laser with a power output of 1W in continuous mode for 30 seconds. Group C was subjected to the application of NovaMin paste, which contains a 927 ppm fluoride content. Following the therapy, occluded dentinal tubules were analyzed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) for both quantitative and qualitative examination. The data analysis was conducted using a one-way analysis of variance (ANOVA) and Tukey\'s test, with a significance threshold of 0.05.
RESULTS: The average percentages of complete blockage of dentinal tubules in Groups A, B, and C were evaluated using the number of entirely unobstructed dentinal tubules at magnifications of 2000X (F = 3.05, p = 0.064), 5000X (F = 5.33, p = 0.011), and 10000X (F = 8.63, p = 0.001). The count of partially open dentinal tubules seen at magnifications of 2000X, 5000X, and 10000X was F = 10.15 (P < 0.001), F = 5.97 (p = 0.007), and F = 2.12 (p = 0.140) accordingly.
CONCLUSIONS: NovaMin technology has demonstrated more effectiveness in blocking dentinal tubules compared to 810nm diodes and Er: YAG lasers.

UNASSIGNED: Melanin is considered the main chromophore for laser hair removal. Due to a lack of laser-absorbing chromophores, removing non-pigmented hair with laser is quite problematic with unsatisfactory outcomes. This problem could be solved by delivering more melanin to the area around the hair follicle and enhancing that area as a target for light absorption. The insolubility of Sepia melanin as an exogenous dye, in most solvents, limits its bioavailability and thus its clinical use.
UNASSIGNED: In our study, to overcome the solubility problems and increase the bioavailability of melanin for biomedical and cosmetic applications, natural sepia melanin was loaded in different nano-delivery systems (spanlastics and transfersomes) to be delivered to the hair follicles. The different formulations of melanin were prepared and characterized. In vivo skin deposition and histopathological studies were conducted on albino mice.
UNASSIGNED: Transmission electron microscopy (TEM) showed the spherical shape of the prepared vesicles with an average particle size of 252 and 262 nm and zeta potential of -22.5 and -35 mV for melanin spanlastics and melanin transfersomes, respectively. Histopathological examination of hair follicles and pilosebaceous glands for the irradiated and non-irradiated albino mice skin was studied post the application of the prepared formulations topically and subcutaneously. Qualitative statistical analysis was conducted and melanin transfersomes and melanin spanlastics showed significant damage to pilosebaceous glands and hair follicles with a p-value of 0.031 and 0.009 respectively.
UNASSIGNED: Melanin nanovesicles as transfersomes and spanlastics could be considered a promising approach for the removal of non-pigmented hair.

Lung cancer staging is crucial for personalized treatment and improved prognosis. We propose a novel bimodal diagnostic approach that integrates LIBS and Raman technologies into a single platform, enabling comprehensive tissue elemental and molecular analysis. This strategy identifies critical staging elements and molecular marker signatures of lung tumors. LIBS detects concentration patterns of elemental lines including Mg (I), Mg (II), Ca (I), Ca (II), Fe (I), and Cu (II). Concurrently, Raman spectroscopy identifies changes in molecular content, such as phenylalanine (1033 cm-1), tyrosine (1174 cm-1), tryptophan (1207 cm-1), amide III (1267 cm-1), and proteins (1126 cm-1 and 1447 cm-1), among others. The bimodal information is fused using a decision-level Bayesian fusion model, significantly enhancing the performance of the convolutional neural network architecture in classification algorithms, with an accuracy of 99.17 %, sensitivity of 99.17 %, and specificity of 99.88 %. This study provides a powerful new tool for the accurate staging and diagnosis of lung tumors.

OBJECTIVE: To compare the detection rate and diagnostic accuracy of cardia polyps using endoscopy with blue laser imaging (BLI) and white-light imaging (WLI).
METHODS: Patients were randomly divided into the BLI group and WLI group according to the endoscopic procedures. BLI followed by WLI was conducted in the BLI group, whereas WLI followed by BLI examination was conducted in the WLI group. The number, size, microstructure, and microvascular patterns of cardia polyps detected were recorded. Biopsy of the polyps was then performed.
RESULTS: The detection rate of cardia polyps in the BLI group was higher than that in the WLI group (7.87% vs 4.22%, P = 0.018). The rate of overlooked lesions in the BLI group was lower than in the WLI group (0.64% vs 3.38%, P = 0.003). The diagnostic coincidence rate between magnifying BLI and histopathology was 88.16%. The sensitivity, specificity, positive predictive value and negative predictive value for the diagnosis of neoplastic lesions by magnifying endoscopy with BLI were 90.91%, 87.69%, 55.56%, and 98.28%, respectively. The most remarkable patterns for predicting inflammatory polyps were the prolonged and fine network patterns (sensitivity 71.43%, specificity 93.75%). Small round combined with honeycomb patterns were the most common among fundic gland polyps (sensitivity 80.00%, specificity 98.48%). Neoplastic lesions presented as villous or ridge-like combined with core vascular or unclear pattern for both microvascular and microstructure patterns.
CONCLUSIONS: BLI is more effective than WLI in the detection and diagnosis of cardia polyps, and magnifying endoscopy with BLI may help diagnose such lesions.

Background In the current cosmetics industry, bleaching is often associated with lasers. However, such treatment also harbors risks. Tooth death is observed at pulpal temperature increases ≥5.6 °C. Therefore, it seems important to investigate the effects of using different lasers. The aim of this study was to determine pulpal temperature increases at different laser parameters during bleaching by modeling a realistic environment and to compare the temperature recording using a thermocouple and thermal camera. The authors assumed that there are laser settings for the lasers used at which the pulpal temperature increases are <5.6 °C and that the temperature recordings with thermocouples and thermal cameras differ only minimally. Methods Human teeth were used, which were extracted for dental reasons. During experiment, teeth were bleached conventionally and by laser activation at 940 nm, 445 nm, and 970 nm. The temperature in the pulp was recorded using thermocouples. In a second setup, longitudinally halved teeth were bleached, while the temperature in the pulp was recorded with a thermocouple and thermal camera. Descriptive statistics were used. The significance level is 0.05. Results In addition to conventional bleaching, temperature increases <5.6 °C were observed for bleaching at 940 nm 1.5 W, at 445 nm 0.3 W, and at 970 nm 0.5 W. For bleaching procedures using 940 nm 7 W, 940 nm 2 W, 445 nm 0.5 W, and 970 nm 1 W, the temperature increase was ≥5.6 °C. Significant differences (p < 0.05) were found in the maximum temperature increases (°C) between all groups. Temperature recordings using a thermocouple and thermal camera differed by about 2.3 °C. The working hypotheses were confirmed. Conclusion With laser bleaching, attention must be paid to the type of laser, its power, and the time in order to avoid excessive overheating of the dental pulp.

OBJECTIVE: Dental implants have been successfully implemented as a treatment for tooth loss. However, peri-implantitis, an inflammatory reaction owing to microbial deposition around the implant, can lead to implant failure. So, it is necessary to treat peri-implantitis. Therefore, this numerical study is aimed at investigating conditions for treating peri-implantitis.
METHODS: Photothermal therapy, a laser treatment method, utilizes photothermal effect, in which light is converted to heat. This technique has advantage of selectively curing inflamed tissues by increasing their temperature. Accordingly, herein, photothermal effect on peri-implantitis is studied through numerical analysis with using Arrhenius damage integral and Arrhenius thermal damage ratio.
RESULTS: Through numerical analysis on peri-implantitis treatment, we explored temperature changes under varied laser settings (laser power, radius, irradiation time). We obtained the temperature distribution on interface of artificial tooth root and inflammation and determined whether temperature exceeds or does not exceed 47℃ to know which laser power affects alveolar bone indirectly. We defined the Arrhenius thermal damage ratio as a variable and determined that the maximum laser power that does not exceed 47℃ at the AA\' line is 1.0 W. Additionally, we found that the value of the Arrhenius thermal damage ratio is 0.26 for a laser irradiation time of 100 s and 0.50 for 500 s.
CONCLUSIONS: The result of this numerical study indicates that the Arrhenius thermal damage ratio can be used as a standard for determining the treatment conditions to help assisted laser treatment for peri-implantitis in each numerical analysis scenario.