UNASSIGNED: Implants are widely used in the field of orthopedics and dental sciences. Titanium (TI) and its alloys have become the most widely used implant materials, but implant-associated infection remains a common and serious complication after implant surgery. In addition, titanium exhibits biological inertness, which prevents implants and bone tissue from binding strongly and may cause implants to loosen and fall out. Therefore, preventing implant infection and improving their bone induction ability are important goals.
UNASSIGNED: To study the antibacterial activity and bone induction ability of titanium-copper alloy implants coated with nanosilver/poly (lactic-co-glycolic acid) (NSPTICU) and provide a new approach for inhibiting implant-associated infection and promoting bone integration.
UNASSIGNED: We first examined the in vitro osteogenic ability of NSPTICU implants by studying the proliferation and differentiation of MC3T3-E1 cells. Furthermore, the ability of NSPTICU implants to induce osteogenic activity in SD rats was studied by micro-computed tomography (micro-CT), hematoxylin-eosin (HE) staining, masson staining, immunohistochemistry and van gieson (VG) staining. The antibacterial activity of NSPTICU in vitro was studied with gram-positive Staphylococcus aureus (Sa) and gram-negative Escherichia coli (E. coli) bacteria. Sa was used as the test bacterium, and the antibacterial ability of NSPTICU implanted in rats was studied by gross view specimen collection, bacterial colony counting, HE staining and Giemsa staining.
UNASSIGNED: Alizarin red staining, alkaline phosphatase (ALP) staining, quantitative real-time polymerase chain reaction (qRT-PCR) and western blot analysis showed that NSPTICU promoted the osteogenic differentiation of MC3T3-E1 cells. The in vitro antimicrobial results showed that the NSPTICU implants exhibited better antibacterial properties. Animal experiments showed that NSPTICU can inhibit inflammation and promote the repair of bone defects.
UNASSIGNED: NSPTICU has excellent antibacterial and bone induction ability, and has broad application prospects in the treatment of bone defects related to orthopedics and dental sciences.

UNASSIGNED: A fracture is considered a medical emergency leading to considerable complications.
UNASSIGNED: This study aimed to describe the accelerating action of Ag-NPs-FG on fracture healing in rabbits.
UNASSIGNED: Silver NPs (AgNPs) were reduced with fenugreek (FG), loaded into a starch gel base, and investigated for their morphology, size, and charge. Four equal groups were randomly formed of 40 adult male rabbits. A 3.5 mm diameter bone defect was created at the proximal metaphysis of the right tibia in each rabbit. Groups 1-4 were injected with placebo saline, AgNPs-FG, plain gel, and FG-gel at the bone defect zone, respectively. The healing was assessed for 8 weeks postoperatively based on the radiographic, bone turnover markers, and histopathological examinations.
UNASSIGNED: The AgNPs-FG was obtained as a faint reddish color, spherical in shape, with an absorbance of 423 nm, a size of 118.0 ± 1.7 nm, and a surface charge of -7.8 ± 0.518 mV. The prepared AgNPs-FG hydrogel was clear, translucent, and homogenous. The pH values were 6.55-6.5 ± 0.2, the viscosity of 4,000 and 1,875 cPs, and spreadability of 1.6 ± 0.14 and 2.0 ± 0.15 for both FG and AgNPs-FG hydrogel, respectively. The radiographic union scale was significantly (p < 0.05) improved in group 2 with a significant (p < 0.05) increase in bone turnover markers was found in comparison to other treated groups. Histopathological examination revealed the formation of mature bone on the 28th postoperative day in groups 2 and 4.
UNASSIGNED: Colloidal nano-formulation of AgNPs-FG loaded hydrogel could be a promising formulation to accelerate rabbits\' tibial bone healing process.

Solution-processed graphene is beneficial for large-scale, low-cost production. However, its small lateral size, variable layer thickness, and uncontrollable oxidation level still restrict its widespread electronic application. In this study, a newly developed electrochemical exfoliation process was introduced, and a graphene-patched film electrode was fabricated by interfacial self-assembly. We were able to minimize the deterioration of graphene colloids during exfoliation by voltage and electrolyte modulation, but the patched structure of the graphene electrode still showed low conductivity with numerous inter-sheet junctions. Therefore, we determined the optimal conditions for the growth of fully networked silver structures on the multi-stacked graphene film by direct current electro-deposition, and these silver-graphene composite films showed significantly lowered graphene-colloid-patched film surface resistance.

BACKGROUND: Acinetobacter baumannii resistant strains lead to increased mortality, treatment costs, and an increase in the length of hospitalization. Nowadays, nanoparticles are considered a substitute for antibiotics. This study aimed to determine the MIC of Silver (Ag) and Zinc Oxide (ZnO) Nanoparticles (NPs) on Biofilm-Producing Acinetobacter baumannii and determine the relationship between MIC and frequency of efflux pump genes in cutaneous specimens in Shiraz, Southwest Iran in 2021-2022.
METHODS: In this study, specimens were collected from April 2021 to June 2022 at Namazi and Faqihi Hospitals in Shiraz. Investigation of biofilm production in multidrug resistance (MDR) isolates was done by the microtiter plate method. Synthesized nanoparticles were characterized by UV-vis spectrum, X-ray diffraction (XRD), and electron microscopy. The MIC of AgNPs and ZnONPs for isolates was done using the method described in the CLSI guideline (2018). The antibacterial effect of MIC of NPs on inanimate objects was done by colony counts. The prevalence of efflux pump genes (adeR, adeC, adeA, abeM, adeK, adeI) was also investigated by PCR technique.
RESULTS: The highest ceftriaxone resistance (68%) and lowest colistin resistance (7%) were identified. 57% of isolates were MDR. In addition, 71.9% could produce biofilm and 28.1% of isolates could not produce biofilm. The average size of AgNPs and ZnONPs in the present study is 48 and < 70 nm, respectively. The nanoparticles were spherical. The MIC and the MBC of the ZnONPs were in the range of 125 to 250 µg/mL respectively. Also, for AgNPs, the MIC and the MBC were in the range of 62.5 to 250 µg/ml, respectively. AbeM gene had the highest frequency and the AdeK gene had the lowest frequency. Statistical analysis showed that there is a relationship between the frequency of adeA, adeC, and adeM genes with the MIC of AgNPs and ZnONPs.
CONCLUSIONS: According to the results of the present study, inanimate objects such as scalpels in contact with AgNPs (6000 µg/ml for 240 min) or ZnONPs (5000 µg/ml for 120 min) can be free of biofilm producing Acinetobacter baumannii  with efflux pump genes.

The intended research aims to explore the convection phenomena of a hybrid nanofluid composed of gold and silver nanoparticles. This research is novel and significant because there is a lack of existing studies on the flow behavior of hybrid nanoparticles with important physical properties of blood base fluids, especially in the case of sidewall ruptured dilated arteries. The implementation of combined nanoparticles rather than unadulterated nanoparticles is one of the most crucial elements in boosting the thermal conduction of fluids. The research methodology encompasses the utilization of advanced bio-fluid dynamics software for simulating the flow of the nanofluid. The physical context elucidates the governing equations of momentum, mass, momentum, and energy in terms of partial differential equations. The results are displayed in both tabular and graphical forms to demonstrate the numerical and graphical solutions. The effect of physical parameters on velocity distribution is illustrated through graphs. Furthermore, the study\'s findings are unique and original, and these computational discoveries have not been published by any researcher before. The finding implies that utilizing hybrid nanoparticles as drug carriers holds great promise in mitigating the effects of blood flow, potentially enhancing drug delivery, and minimizing its impact on the body.

The widespread use of silver nanoparticles (AgNPs) in commercial and industrial applications has led to their increased presence in the environment, raising concerns about their ecological and health impacts. This study pioneers an investigation into the chronic versus short-term acute toxicological impacts of differently coated AgNPs on zebrafish, with a novel focus on the thyroid-disrupting effects previously unexplored. The results showed that acute toxicity ranked from highest to lowest as AgNO3 (0.128 mg/L), PVP-AgNPs (1.294 mg/L), Citrate-AgNPs (6.984 mg/L), Uncoated-AgNPs (8.269 mg/L). For bioaccumulation, initial peaks were observed at 2 days, followed by fluctuations over time, with the eventual highest enrichment seen in Uncoated-AgNPs and Citrate-AgNPs at concentrations of 13 and 130 μg/L. Additionally, the four exposure groups showed a significant increase in T3 levels, which was 1.28-2.11 times higher than controls, and significant changes in thyroid peroxidase (TPO) and thyroglobulin (TG) content, indicating thyroid disruption. Gene expression analysis revealed distinct changes in the HPT axis-related genes, providing potential mechanisms underlying the thyroid toxicity induced by different AgNPs. The higher the Ag concentration in zebrafish, the stronger the thyroid disrupting effects, which in turn affected growth and development, in the order of Citrate-AgNPs, Uncoated-AgNPs > AgNO3, PVP-AgNPs. This research underscores the importance of considering nanoparticle coatings in risk assessments and offers insights into the mechanisms by which AgNPs affect aquatic organisms\' endocrine systems, highlighting the need for careful nanotechnology use and the relevance of these findings for understanding environmental pollutants\' role in thyroid disease.

According to an estimate, 30% to 40%, of global fruit are wasted, leading to post harvest losses and contributing to economic losses ranging from $10 to $100 billion worldwide. Among, all fruits the discarded portion of oranges is around 20%. A novel and value addition approach to utilize the orange peels is in nanoscience. In the present study, a synthesis approach was conducted to prepare the metallic nanoparticles (copper and silver); by utilizing food waste (Citrus plant peels) as bioactive reductants. In addition, the Citrus sinensis extracts showed the reducing activity against metallic salts copper chloride and silver nitrate to form Cu-NPs (copper nanoparticles) and Ag-NPs (Silver nanoparticles). The in vitro potential of both types of prepared nanoparticles was examined against plant pathogenic bacteria Erwinia carotovora (Pectobacterium carotovorum) and pathogens effect on human health Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Moreover, the in vivo antagonistic potential of both types of prepared nanoparticles was examined by their interaction with against plant (potato slices). Furthermore, additional antipathogenic (antiviral and antifungal) properties were also examined. The statistical analysis was done to explain the level of significance and antipathogenic effectiveness among synthesized Ag-NPs and Cu-NPs. The surface morphology, elemental description and size of particles were analyzed by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy and zeta sizer (in addition polydispersity index and zeta potential). The justification for the preparation of particles was done by UV-Vis Spectroscopy (excitation peaks at 339 nm for copper and 415 nm for silver) and crystalline nature was observed by X-ray diffraction. Hence, the prepared particles are quite effective against soft rot pathogens in plants and can also be used effectively in some other multifunctional applications such as bioactive sport wear, surgical gowns, bioactive bandages and wrist or knee compression bandages, etc.

Implant therapy is a common treatment option in dentistry and orthopedics, but its application is often associated with an increased risk of microbial contamination of the implant surfaces that cause bone tissue impairment. This study aims to develop two silver-enriched platelet-rich plasma (PRP) multifunctional scaffolds active at the same time in preventing implant-associated infections and stimulating bone regeneration. Commercial silver lactate (L) and newly synthesized silver deoxycholate:β-Cyclodextrin (B), were studied in vitro. Initially, the antimicrobial activity of the two silver soluble forms and the PRP enriched with the two silver forms has been studied on microbial planktonic cells. At the same time, the biocompatibility of silver-enriched PRPs has been assessed by an MTT test on human primary osteoblasts (hOBs). Afterwards, an investigation was conducted to evaluate the activity of selected concentrations and forms of silver-enriched PRPs in inhibiting microbial biofilm formation and stimulating hOB differentiation. PRP-L (0.3 µg/mm2) and PRP-B (0.2 µg/mm2) counteract Staphylococcus aureus, Staphylococcus epidermidis and Candida albicans planktonic cell growth and biofilm formation, preserving hOB viability without interfering with their differentiation capability. Overall, the results obtained suggest that L- and B-enriched PRPs represent a promising preventive strategy against biofilm-related implant infections and demonstrate a new silver formulation that, together with increasing fibrin binding protecting silver in truncated cone-shaped cyclic oligosaccharides, achieved comparable inhibitory results on prokaryotic cells at a lower concentration.

UNASSIGNED: Activated carbon cloth (ACC), known as Zorflex dressing, has emerged as an innovative approach in managing bacterial infection in diabetic foot ulcer (DFU) treatment. This pilot study was undertaken to determine the efficacy of Zorflex ACC dressing (Chemviron Carbon Cloth Division, UK) compared to standard silver-based dressing on DFUs.
UNASSIGNED: An open label, comparative, randomised controlled trial enrolling patients who attended the diabetic foot clinic was conducted between August 2022 and August 2023. The primary endpoint was a difference of 20% in wound area reduction with the ACC dressing compared to silver-based dressing within eight weeks. The secondary endpoints were proportion of complete healing, time to healing and adverse events.
UNASSIGNED: The cohort comprised 40 patients. The mean wound reduction percentage at 8 weeks for patients in the ACC arm was 85.40±16.00% compared with 65.08±16.36% in the silver-based dressing arm. Complete healing was observed in six of 20 patients in the ACC arm compared to two of 20 in the silver-based dressing arm.
UNASSIGNED: These data suggest that the ACC dressing promotes better ulcer healing in DFU patients than the silver-based dressing.

It would be very beneficial to have a method for joining of ceramics to titanium reliably. Although several techniques have been developed and tested to prevent extensive interfacial chemical reactions in titanium-ceramic systems, the main problem of the inherent brittleness of interfaces was still unsolved. To overcome this problem also in dental applications, we decided to make use of an interlayer material that needs to meet the following requirements: First, it has to be biocompatible, second, it should not melt below the bonding temperatures, and third, it should not react too strongly with titanium, so that its plasticity will be maintained. Considering possible material options only the metals: gold, platinum, palladium, and silver, fulfill the first and second requirements. To find out-without an extensive experimental testing program-which of the four metals fulfills the third requirement best, the combined thermodynamic and reaction kinetic modeling was employed to evaluate how many and how thick reaction layers are formed between the interlayer metals and titanium. With the help of theoretical modeling, it was shown that silver fulfills the last requirement best. However, before starting to test experimentally the effect of the silver layer on the mechanical integrity of dental ceramic/Ag/Ti joints it was decided to make use of mechanical analysis of the three-point bending test, the result of which indicated that the silver layer increases significantly the bond strength of the joints. This result encouraged us to develop a new technique for plating silver on titanium. Subsequently, we executed numerous three-point bending tests, which demonstrated that silver-plated titanium-ceramic joints are much stronger than conventional titanium-ceramic joints. Hence, it can be concluded that the combined thermodynamic, reaction kinetic, and mechanical modeling method can also be a very valuable tool in medical research and development work.