This work provides a novel, low-cost, and effective method to prepare disordered carbon materials for advanced sodium-ion batteries using biomass. A large amount of olive stone waste is yearly produced in the world, and it could be re-used for fine applications other than fuel for heat production. After treatment with sulfuric acid solution and carbonization process, wastes of olive stone are efficiently transformed into optimized carbon electrode material. XRD, XRF and XPS, electron microscopy, and physical gas adsorption are used for the compositional, microstructural, and textural characterization of the carbons. During the synthesis, impurities are removed, C-S links are formed and micropores pores are created. Sulfuric acid acts like S-dopant. The latent pores, or pores closed to nitrogen, can be found using CO2 adsorption, and are very suitable for accommodation for sodium. The results reveal that the reversible capacity is raised from ca. 200 mAh g-1 to ca. 250 mAh g-1 for the carbon obtained through treatment with sulfuric acid. The improved electrochemistry is the result of the s-doping and the porosity.

Lignocellulolytic enzymes play a crucial role in efficiently converting lignocellulose into valuable platform molecules in various industries. However, they are limited by their production yields, costs, and stability. Consequently, their production by producers adapted to local environments and the choice of low-cost raw materials can address these limitations. Due to the large amounts of olive stones (OS) generated in Morocco which are still undervalued, Penicillium crustosum, Fusarium nygamai, Trichoderma capillare, and Aspergillus calidoustus, are cultivated under different fermentation techniques using this by-product as a local lignocellulosic substrate. Based on a multilevel factorial design, their potential to produce lignocellulolytic enzymes during 15 days of dark incubation was evaluated. The results revealed that P. crustosum expressed a maximum total cellulase activity of 10.9 IU/ml under sequential fermentation (SF) and 3.6 IU/ml of β-glucosidase activity under submerged fermentation (SmF). F. nygamai recorded the best laccase activity of 9 IU/ml under solid-state fermentation (SSF). Unlike T. capillare, SF was the inducive culture for the former activity with 7.6 IU/ml. A. calidoustus produced, respectively, 1,009 μg/ml of proteins and 11.5 IU/ml of endoglucanase activity as the best results achieved. Optimum cellulase production took place after the 5th day under SF, while ligninases occurred between the 9th and the 11th days under SSF. This study reports for the first time the lignocellulolytic activities of F. nygamai and A. calidoustus. Furthermore, it underlines the potential of the four fungi as biomass decomposers for environmentally-friendly applications, emphasizing the efficiency of OS as an inducing substrate for enzyme production.

A series of adsorbents (activated carbons, ACs) were synthesized by physical and chemical activation of olive stones (OS) and their textural and chemical characteristics determined by complementary techniques such as N2 and CO2 physisorption, pH of the point zero of charge (pHPZC), HRSEM or XPS. Samples with a wide range of physicochemical properties were obtained by fitting the activation procedure. The performance of these adsorbents in filters working under dynamic conditions was studied by determining the corresponding breakthrough curves for the ethylene removal. The physicochemical transformations of OS during activation were related with the adsorptive performance of derivative ACs. Results were compared to those obtained using commercial carbons, in particular ACs, carbon black or carbon fibers, in order to identify the properties of these materials on influencing the adsorptive performance. In general, ACs from OS perform better than the commercial samples, being also easily regenerated and properly used during consecutive adsorption cycles. CO2-activation showed to be the best synthesis option, leading to granular ACs with a suitable microporosity and surface chemistry. These results could favour the integration of this type of inexpensive materials on devices for the preservation of climacteric fruits, in a clear example of circular economy by reusing the agricultural residues.

This work describes the chemical and structural characterization of a lignin-rich residue from the bioethanol production of olive stones and its use for nanostructures development by electrospinning and castor oil structuring. The olive stones were treated by sequential acid/steam explosion pretreatment, further pre-saccharification using a hydrolytic enzyme, and simultaneous saccharification and fermentation (PSSF). The chemical composition of olive stone lignin-rich residue (OSL) was evaluated by standard analytical methods, showing a high lignin content (81.3 %). Moreover, the structural properties were determined by Fourier-transform infrared spectroscopy, nuclear magnetic resonance, and size exclusion chromatography. OSL showed a predominance of β-β\' resinol, followed by β-O-4\' alkyl aryl ethers and β-5\' phenylcoumaran substructures, high molecular weight, and low S/G ratio. Subsequently, electrospun nanostructures were obtained from solutions containing 20 wt% OSL and cellulose triacetate with variable weight ratios in N, N-Dimethylformamide/Acetone blends and characterized by scanning electron microscopy. Their morphologies were highly dependent on the rheological properties of polymeric solutions. Gel-like dispersions can be obtained by dispersing the electrospun OSL/CT bead nanofibers and uniform nanofiber mats in castor oil. The rheological properties were influenced by the membrane concentration and the OSL:CT weight ratio, as well as the morphology of the electrospun nanostructures.

This paper studies the effects of using 20, 40 and 60% vol. of either expanded polystyrene (EPS) or olive stones as additives in the manufacture of handmade bricks. The bricks were made using clayey earth from Viznar (Spain) and were fired at 950 °C. The effects of the additives on the mineralogical, textural and physical properties of the fired bricks were analysed, focusing mainly on possible changes in their pore system, thermal insulation, compressive strength, colour and salt crystallisation resistance. From a mineralogical point of view, the bricks made with olive stones had a lighter red colour due to their lower hematite content. As expected, the samples made with these additives had greater porosity and better thermal insulation. However, they also had lower compressive strength to the point that the only samples that met the recommended criteria for general construction work were those with 20% vol. EPS, while those with 40% vol. EPS met the criteria to be used as lightweight bricks. Both additives improved the resistance of the bricks to decay by salt crystallisation.

Olive stones are a by-product of the olive oil industry. In this work, the valorisation of olive stones through pyrolysis was attempted. Before pyrolysis, half of the samples were impregnated with sulphuric acid. Pyrolysis was carried out in a vertical tubular furnace with a ceramic support. The pyrolysis conditions assayed were: temperature between 400 and 600 °C, heating ramp between 5 and 20 °C∙min-1, and inert gas flow rate between 50 and 300 mL Ar∙min-1. Among them, temperature was the only parameter that influenced the pyrolysis product distribution. The most suitable temperature for obtaining biochar was 400 °C for both non-treated and pre-treated raw material, while for obtaining bio-oil, it was 600 °C for impregnated olive stones and 400 °C for the raw material. The impregnated olives stones led to bio-oils with much higher amounts of high-added-value products such as levoglucosenone and catechol. Finally, the biochars were impregnated with sulphuric acid and assayed as biocatalysts for the esterification of oleic acid with methanol in a stirred tank batch reactor at 60 °C for 30 min. Biochars from non-treated olive stones, which had lower specific surfaces, led to higher esterification yields (up to 96.2%).

Olive trees constitute one of the largest agroindustries in the Mediterranean area, and their cultivation generates a diverse pool of biomass by-products such as olive tree pruning (OTP), olive leaves (OL), olive stone (OS), and extracted olive pomace (EOP). These lignocellulosic materials have varying compositions and potential utilization strategies within a biorefinery context. The aim of this work was to carry out an integral analysis of the aqueous extractives fraction of these biomasses. Several analytical methods were applied in order to fully characterize this fraction to varying extents: a mass closure of >80% was reached for EOP, >76% for OTP, >65% for OS, and >52% for OL. Among the compounds detected, xylooligosaccharides, mannitol, 3,4-dihydroxyphenylglycol, and hydroxytyrosol were noted as potential enhancers of the valorization of said by-products. The extraction of these compounds is expected to be more favorable for OTP, OL, and EOP, given their high extractives content, and is compatible with other utilization strategies such as the bioconversion of the lignocellulosic fraction into biofuels and bioproducts.

BACKGROUND: The use of agricultural waste as a low-cost adsorbent for the removal of hazardous methylene blue (MB) from aqueous solution was investigated. In this research, the potentiality of using black nano olive stones (black NOS) and green nano olive stones (green NOS) for MB adsorption was conducted.
METHODS: Various remediation parameters such as initial MB concentration, pH, and temperature were investigated. Thermodynamic study was carried out to determine the homogeneity of the adsorbent and spontaneity of the adsorption process. Different physical and chemical characterizations were studied using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), Brunauer-Emmett-Teller (BET) surface area, pore radius and pore volume.
RESULTS: It was found that NOS exhibits an acidic nature, however the highest MB removal efficiency was recorded at pH 10; reaching up to 71%. The negative value of the heat of the adsorption process (∆H ° ) indicated the reaction followed an exothermic pathway while the negative value of Gibbs adsorption (∆G ° ) further suggested its spontaneous nature. The results indicated that the Freundlich model described well the adsorption process with 99.5% correlation coefficient for green NOS. FTIR was used to analyze functional groups on the adsorbents\' surfaces that could play vital roles in the remediation process. SEM analysis revealed that the adsorbents comprised of abundant spherical deep cavities and porous nature.
CONCLUSIONS: The result obtained successfully demonstrated the potential of using black and green NOS as suitable adsorbents for the removal of MB from water.

Spent olive pomace from the two-phase extraction system of virgin olive oil and olive pomace oil, is a major agro-industrial residue. Present study aimed at the valorization of residual olive pomace and stones (seeds) by hydrothermal treatment and enzymatic hydrolysis of glucans. Both residues contain lignin (31.2% and 42.1%), glucans (13.8% and 15.3%) and xylans (18.9% and 20.3%). After hydrothermal pretreatment (130 °C, 30 min; severity factor log R0 = 2.99), 65% and 75% of hemicelluloses (65% of xylan) were hydrolysed into xylo-oligosaccharides in pomace and stones, respectively. Cellulose and lignin were not substantially affected. Three commercial enzyme preparations, Saczyme Yield, Ultimase BWL 40 and Celluclast 1.5 L, were evaluated for saccharification of pomace or stones at three biomass loads (10, 20 and 30%, w/v). Saczyme and Ultimase were active with high solid loads (30%), reaching 80 and 90% of glucan conversion in pomace, and 40 and 55% in stones, respectively, after 5 h.

The textural properties and surface chemistry of different activated carbons, prepared by the chemical activation of olive stones, have been investigated in order to gain insight on the NO₂ adsorption mechanism. The parent chemical activated carbon was prepared by the impregnation of olive stones in phosphoric acid followed by thermal carbonization. Then, the textural properties and surface chemistry were modified by chemical treatments including nitric acid, sodium hydroxide and/or a thermal treatment at 900 °C. The main properties of the parent and modified activated carbons were analyzed by N₂-adsorption, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) techniques, in order to enlighten the modifications issued from the chemical and thermal treatments. The NO₂ adsorption capacities of the different activated carbons were measured in fixed bed experiments under 500 ppmv NO₂ concentrations at room temperature. Temperature programmed desorption (TPD) was applied after adsorption tests in order to quantify the amount of the physisorbed and chemisorbed NO₂. The obtained results showed that the development of microporosity, the presence of oxygen-free sites, and the presence of basic surface groups are key factors for the efficient adsorption of NO₂.