The most prevalent kind of odontogenic cysts is radicular cysts, which usually develop from the epithelial remnants in the periodontal ligament as a result of inflammation that follows pulp necrosis. We report a case of a 49-year-old male patient who complained of painless swelling in the maxillary anterior region, which turned out to be a radicular cyst. Upon clinical examination, a soft, nontender swelling that fluctuated was found. A periapical lesion was found upon radiographic assessment. A radicular cyst was tentatively diagnosed based on clinical and radiological features. The treatment plan included enucleation, restoration of the defect with bone graft, and endodontic therapy with antibiotics. Endodontic therapy was administered after the cystic lesion was surgically removed. The diagnosis of a radicular cyst was validated by histopathological analysis. The significance of a multidisciplinary approach for the successful management of radicular cysts is emphasized in this case report, which also underscores the need for a comprehensive clinical and radiographic evaluation for accurate diagnosis. Prompt identification and suitable intervention are essential to avert possible complications and guarantee successful treatment results.

UNASSIGNED: To evaluate and compare three different root canal sealers (Endo-Sequence BC, Bio Root RCS and Zinc Oxide Eugenol) on post operative pain in single visit root canal therapies.
UNASSIGNED: 60 subjects with age ranging from 18-60 years were randomly selected depending upon the inclusion criteria. The subjects were then divided into three groups with 20 patients in each. In all the patients\' single visit root canal treatment was done followed by obturation using different sealers. In Group I Endo- Sequence sealer was used, in Group II Bio-Root RCS and in Group III Zinc Oxide Eugenol sealers were used respectively.
UNASSIGNED: statistically significant results were obtained on comparing the efficacy of three groups with Group I proving to be much effect among the three.
UNASSIGNED: within the limitation of the study it can be concluded that though all the sealers were effective in reducing post-operative pain, patients with Endo Sequence BC sealers evaluated statistically significant results.

Clinicians should be well-versed in the anatomy, variations, and teeth anomalies. Developmental disturbances of the teeth can lead to alterations in size, shape, number, structure, and eruption of the teeth. Developmental disturbances can lead to germination, fusion, concrescence, dilaceration, talons, cusps, dens in dente, etc. Protostylid, an additional cusp on the buccal aspect of the maxillary molar, which is a rare clinical finding, can lead to plaque accumulation, making oral hygiene maintenance difficult. This leads to clinical attachment loss and bone loss. This condition may often go undiagnosed. It should be diagnosed to prevent further complications. This case has been reported to make clinicians aware of the importance of diagnosing the case at the earliest possible time so that complications can be prevented and management is easier. From the perspective of forensic dentistry, this morphological feature, though uncommon, may be useful for the classification and identification of victims in mass causalities and bite marks on bodies or inanimate objects. This is one of the rarest cases of protostylids reported to date. This may not only pose a significant problem in endodontic therapy due to morphological alterations in root canals and periodontal therapy due to grove formation leading to an inability to maintain a plaque-free area (bone loss) but also be of very significant interest from the perspective of forensic dentistry.

BACKGROUND: Despite substantial breakthroughs in instrumentation systems and pharmaceutical interventions, pain following endodontic therapy remains a serious concern. The effect of the type of endodontic instrumentation system in post-operative pain after endodontic therapy has been a matter of debate.
OBJECTIVE: To evaluate different endodontic instrumentation systems, namely Reciproc (GmbH, Munich), OneShape® (MicroMega, France), Protaper Gold (Dentsply Sirona, USA), and Hyflex® EDM (Coltène/Whaledent Inc., USA) file systems, regarding post-operative pain after endodontic therapy Methods and materials: The endodontic department treated healthy patients aged 20 to 50 years who were experiencing symptoms of irreparable pulpitis in one or more maxillary molars or mandibular molars. Five hundred was the determined size of the sample. The study participants were divided into five categories, each comprising 100 participants. These categories were: Category 1: Reciproc instrumentation system. Category 2: OneShape® instrumentation system. Category 3: ProtaperGold instrumentation system. Category 4: HyFlex® EDM instrumentation system. Category 5: Control (stainless steel K-files). Following endodontic therapy, these scores were recorded at 6 hours, 12 hours, 24 hours, 48 hours, and 72 hours using the VAS scale.
RESULTS: The visual analog scale (VAS) score (mean±SD) in the control group was 0.73± 0.40 (<0.001). The VAS score in the Reciproc group was 0.43± 0.05 (<0.001). The VAS score in the OneShape® group was 0.36±0.09 (<0.001). The VAS score in the Protaper Gold group was 0.41 ±0.08 (<0.001). The VAS score in the HyFlex® EDM group was 0.55 ±0.02 (<0.001). The VAS score in all instrumentation techniques at 72 hours follow-up was lesser in comparison to a control group with meaningful statistical significance (<0.001). However, the post-operative pain among the Reciproc, OneShape®, Protaper Gold, and HyFlex® EDM instrumentation systems was not different clinically when compared among themselves. However, VAS values were greater in OneShape® and HyFlex® EDM compared to Reciproc and Protaper Gold, showing increased post-operative pain in OneShape and HyFlex® EDM compared to Reciproc and Protaper Gold. It was also observed that there was a decline in the VAS score in all instrumentation systems as the follow-up period increased from 6 hours to 72 hours, with maximum post-operative pain at 6 hours of follow-up and minimum post-operative pain at 72 hours of follow-up. However, the decline was lesser in OneShape® and HyFlex® EDM in comparison to Reciproc and Protaper Gold, with increased post-operative pain in OneShape® and HyFlex® EDM in comparison to Reciproc and Protaper Gold.
CONCLUSIONS: Post-operative pain at all follow-ups of endodontic procedures was less in Reciproc, OneShape®, Protaper Gold, and HyFlex® EDM than in the control group. VAS scores were higher in the OneShape® and HyFlex® EDM groups compared to the Reciproc and Protaper Gold groups, indicating increased post-operative pain with OneShape® and HyFlex® EDM instruments in comparison to Reciproc and Protaper Gold.

UNASSIGNED: Present research was done to assess stress distribution in three different taper design preparation of root canal with the help of finite element analysis.
UNASSIGNED: Lower incisors teeth having single canals that were cleaned and shaped with the help of NeoEndo Flex Titanium (NiTi) rotary file and later three designs were created such as 4%, 6%, and 8% canal preparation taper. Cone beam computed tomography (CBCT) was done for all teeth and subjected to finite element analysis for stresses. The collected data were statistically analyzed.
UNASSIGNED: Highest stress was found in the coronal followed by the middle and least in the apical part in all three designs. The highest stress value was found in enamel than dentin (MPa). The highest stress value was found with design 3 (8% taper) followed by designs 2 (6% taper) and 1 (4% taper) for enamel and dentin with either oblique or vertical stress loading.
UNASSIGNED: All canals preparation exhibited maximum enamel stress at the coronal load points compared to apical and middle portions. The stress increases with increase in canal tapering.

BACKGROUND: Reconstruction of the entire dentition with odontogenic keratocyst is a very challenging quandary. Most cases of odontogenic keratocyst are often reported to be benign, resulting in severe occlusal discrepancies with the maxillary and mandibular dentition. Dental radiographs occasionally reveal an uncommon, locally aggressive developing cyst termed as odontogenic keratocyst, which is typically located in the posterior jaw. When this cyst occurs in the anterior region, it is often misdiagnosed with other periapical lesions due to its lack of response to pulp vitality tests.
METHODS: This clinical case scenario demarcates the endodontic management of a patient diagnosed with odontogenic keratocyst. A 37-year-old Indian male patient reported to the department with throbbing pain in the lower left posterior tooth requiring endodontic therapy. This patient also presented with odontogenic keratocyst in the anterior region of the jaw, for which he had undergone surgical rehabilitation. This case report highlights the clinical protocol for the endodontic therapy in patient diagnosed with ododntogenic keratocyst. Masticatory impairment was not visible after the follow-up period and the treatment outcome was successful.
CONCLUSIONS: This case report details the presentation, characteristic radiographic findings, and endodontic management of a patient with an extremely rare condition of odontogenic keratocyst. The management involves multidisciplinary approach for the rehabilitation.

Endodontic therapy includes various procedures such as vital pulp therapy, root canal treatment and retreatment, surgical endodontic treatment and regenerative endodontic procedures. Disinfection and tissue repair are crucial for the success of these therapies, necessitating the development of therapeutics that can effectively target microbiota, eliminate biofilms, modulate inflammation and promote tissue repair. However, no current endodontic agents can achieve these goals. Antimicrobial peptides (AMPs), which are sequences of amino acids, have gained attention due to their unique advantages, including reduced susceptibility to drug resistance, broad-spectrum antibacterial properties and the ability to modulate the immune response of the organism effectively. This review systematically discusses the structure, mechanisms of action, novel designs and limitations of AMPs. Additionally, it highlights the efforts made by researchers to overcome peptide shortcomings and emphasizes the potential applications of AMPs in endodontic treatments.

BACKGROUND: The purpose of this study was to assess the antifungal activity of silver nanoparticles (AgNPs) in combination with calcium hydroxide (Ca(OH)2) against Candida albicans (C. albicans).
METHODS: AgNPs was mixed with pure Ca(OH)2 powder in an aqueous base. A standard suspension (1 × 108 bacterial cells/mL) of C. albicans was prepared in a 96-well plate and incubated on shaker at 37 °C in 100% humidity to allow fungal biofilm formation in infected dentin slices (n = 98). The minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) of AgNPs alone or with Ca(OH)2 were determined. The samples were separately placed in 24-well tissue culture plates and divided into three experimental groups (0.03, 0.04, and 0.06) and three control groups; negative (saline) and positive chlorhexidine gel and Ca(OH)2. Quantitative measurements of fungal activity by XTT colorimetric assay and qualitative measurements using confocal laser microscopy and scanning electron microscopy were performed.
RESULTS: The cell viability of C. albicans in the experimental groups was significantly reduced compared to the negative control group. The combination of (AgNPs (0.04%) and Ca(OH)2) was the most potent against C. albicans.
CONCLUSIONS: The findings demonstrated that combining silver nanoparticles with Ca(OH)2 was more effective against C. albicans biofilm compared to Ca(OH)2 alone, suggesting a combing effect.

UNASSIGNED: To assess the clinical and radiographic success of conventional pulpectomy and pulpectomy done under an endodontic microscope over a period of 12 months.
UNASSIGNED: The study was conducted as a single-blinded, parallel-group prospective, randomized, and controlled clinical trial. The enrollment of the study involved the assessment of 258 deciduous molars for eligibility as per the inclusion criteria. A total of 104 teeth were allocated to each group, that is, group I (conventional pulpectomy) and group II (pulpectomy under microscope). However, due to unavoidable circumstances during the coronavirus disease 2019 (COVID-19) pandemic, 98 and 90 teeth were treated in each group, respectively. Pulpectomy in both groups was done using standard protocol except for the use of an endodontic microscope in group II. The clinical and radiographic outcomes were assessed by an independent blinded observer and analyzed using appropriate statistical tests.
UNASSIGNED: The clinical success at 6 months is 95.7 and 96.5%, and at 12 months is 96.6 and 97.7% in groups I and II, respectively. The radiographic success at 6 months is 93.5 and 95.4%, and at 12 months is 95.5 and 98.8% in groups I and II, respectively. The overall success rates of both groups with statistically no significant differences.
UNASSIGNED: The present study concludes comparable results are achieved using an endodontic microscope to conventional pulpectomy without magnification.
UNASSIGNED: Kumar G, Rehman F. Comparative Evaluation of Clinical and Radiographic Success of Pulpectomy Done with and without Dental Operating Microscope in Pediatric Patients: An In Vivo Study. Int J Clin Pediatr Dent 2023;16(S-2):S155-S160.

Artificial teeth in dental training have become a valuable tool for students to gain hands-on experience in a safe and controlled environment. This training method allows students to practice various dental procedures and develop their skills without putting patients at risk. Artificial teeth can be used to simulate dental conditions, allowing students to gain experience in dealing with various situations and techniques. Although previous studies in human dentistry have demonstrated the feasibility of using 3D-printed teeth for teaching endodontic procedures such as root canal therapy, similar research has yet to be conducted in the veterinary field. This study aimed to assess the feasibility of creating 3D-printed teeth from an adult dog skull and validate their use as an alternative training tool for root canal therapy in this species. For this, cone beam computed tomography images from a medium-sized dog skull were used to replicate its teeth using a digital 3D printing system. Then, artificial mandibular first molar teeth and a 24-question survey were sent to specialized veterinary dentistry practitioners in Brazil to assess their perception of the model\'s characteristics during endodontic treatment. In conclusion, it was feasible to create 3D-printed models of dog teeth with high accuracy for the endodontic system. Despite the differences in the properties of the two materials between natural and artificial teeth, it was possible to use the artificial tooth as a training device for conventional endodontic treatment in dogs. The reliability level for the survey was reported as good, displaying a reliability coefficient above 0.86.