Agricultural soils have been identified as potential reservoirs for plastic pollution, with adverse effects on soil properties. Primary sources of plastic input in agricultural landscapes are associated with the application of sewage sludge or compost. Understanding the sources and anticipated plastic content is crucial in mitigating plastic pollution in agricultural fields. This study presents one of the first investigations into the plastic content and other impurities, e.g. glass, of seven organic fertilizers (biowaste compost, digested pig slurry, sewage sludge compost, dry chicken manure, green waste compost, sewage sludge, and a mixed digestate comprising pig slurry, chicken manure, and 74 % renewable raw materials). Potentially visible foreign substances were assessed on the surface of each fertilizer pile. No impurities could be detected in digested pig slurry, chicken manure, and mixed digestate. For the remaining fertilizers, visible potential foreign substances were collected, cleaned, visually described, weighed, photographed, size measured, and chemically characterized using ATR-FTIR. The quantification revealed that plastic particles are the most abundant and are contained in all other fertilizers, in contrast to glass and metal. An increasing trend in plastic particle number per m2: green waste < biowaste < sewage sludge compost < sewage sludge, which is about 4 times greater in sewage sludge than in green waste compost, could be observed. However, sewage sludge compost has the largest plastic mass and surface area per square meter. This illustrates that sewage sludge compost application can be a significant entry pathway for visual plastics into agricultural soils.

Biosolids are a byproduct of wastewater treatment that can be beneficially applied to agricultural land as a fertilizer. While U.S. regulations limit metals and pathogens in biosolids intended for land applications, no organic contaminants are currently regulated. Novel techniques can aid in detection, evaluation, and prioritization of biosolid-associated organic contaminants (BOCs). For example, nontargeted analysis (NTA) can detect a broad range of chemicals, producing data sets representing thousands of measured analytes that can be combined with computational toxicological tools to support human and ecological hazard assessment and prioritization. We combined NTA with a computer-based tool from the U.S. EPA, the Cheminformatics Hazard Comparison Module (HCM), to identify and prioritize BOCs present in U.S. and Canadian biosolids (n = 16). Four-hundred fifty-one features were detected in at least 80% of samples, with identities of 92 compounds confirmed or assigned probable structures. These compounds were primarily categorized as endogenous compounds, pharmaceuticals, industrial chemicals, and fragrances. Examples of top prioritized compounds were p-cresol and chlorophene, based on human health end points, and fludioxonil and triclocarban, based on ecological health end points. Combining NTA results with hazard comparison data allowed us to prioritize compounds to be included in future studies of the environmental fate and transport of BOCs.

A regular tetrahedron model was established to pierce the fractionation of dissolved organic matter (DOM) among quaternary components by using high-resolution mass spectrometry. The model can stereoscopically visualize molecular formulas of DOM to show the preference to each component according to the position in a regular tetrahedron. A classification method was subsequently developed to divide molecular formulas into 15 categories related to fractionation ratios, the relative change of which was demonstrated to be convergent with the uncertainty of mass peak area. The practicality of the regular tetrahedron model was verified by seven kinds of sludge from waste leachate treatment and sewage wastewater treatment plants by using stratification of extracellular polymeric substances coupled with Orbitrap MS as an example, presenting the DOM chemodiversity in stratified sludge flocs. Sensitivity analysis proved that classification results were relatively stable with the perturbation of four model parameters. Multinomial logistic regression analysis could further help identify the effect of molecular properties on the fractionation of DOM based on the classification results of the regular tetrahedron model. This model offers a methodology for the assessment of specificity of sequential extraction on DOM from solid or semisolid components and simplifies the complex mathematical expression of fractionation coefficients for quaternary components.

As an important reservoir of antibiotic resistance genes (ARGs), the sludge discharged from wastewater treatment plants is the key intermediate for ARG transport into the environment. Bdellovibrio-and-like organisms (BALOs) are predatory bacteria that are expected to attack antibiotic-resistant bacteria (ARB). In this study, the screened BALOs (C3 & D15) were mixed with the sludge for biolysis to achieve the satisfying removal efficiencies of six tet genes, two sul genes, and one mobile genetic element (intl 1). Among them, tet(Q) demonstrated the highest reduction rate in relative abundance at 87.3 ± 1.0 %, while tet(X) displayed the lowest of 11.7 ± 0.2 %. The microorganisms, including Longilinea, Methanobacterium, Acetobacterium, Sulfurimonas, allobaculum, Gaiella, AAP99, Ellin6067, Rhodoferax, Ferruginibacter and Thermomonas, were expected to play a dual role in the reduction of ARGs by serving as ARB and BALOs\' preferred prey. Meanwhile, BALOs consortium improved ARGs reduction efficiency via the expansion of the prey profile. Additionally, BALOs decreased the relative abundance of not only pathogens (Shinella, Rickettsia, Burkholderia, Acinetobacter, Aeromonas, Clostridium, Klebsiella and Pseudomonas), but also the ARGs\' host pathogens (Mycobacterium, Plesiocystis, Burkholderia, and Bacteroides). Therefore, the application of BALOs for sludge biolysis are promising to decrease the sludge\'s public health risks via limiting the spread of ARGs and pathogens into the environment.

The enrichment of phosphorus (P) and nitrogen (N) in aquatic systems can cause eutrophication. Moreover, P rocks may become exhausted in the next 100 years. A slow-release fertilizer called struvite (MgNH4PO4.6H2O) can reduce surface runoff. However, the high cost of raw material or chemicals is a bottleneck in their economical production. Therefore, incinerated sewage sludge ash, food wastewater, and bittern were combined as the sources of P, N, and Mg, respectively. Sawdust biochar was used to enhance the adsorptive recovery of nutrients. First, recovery kinetics was studied by comparing bittern-impregnated biochar (BtB) with the Mg-impregnated biochar (MgB). Subsequently, the synergistic physical and chemical interactions were observed for P and N recovery. Almost complete PO43-P recoveries were achieved within 10 min for both biochars. However, NH4+-N recovery was stable after 2 h, with 26% recovery by MgB and 20% recovery by BtB. Biochars activated with steam (steam-activated biochar) and KOH (KOH-activated biochar) gave superior activities to those of unactivated biochars and activated carbon (AC) nutrient recovery and struvite purity. Moreover, the activated biochars showed a lower risk of surface runoff, similar to that of AC. Therefore, activated biochars can be used as an alternative to AC for economical struvite production from a combination of wastewater sources.

Dissolved organic matter (DOM) plays an important role in regulating the fate of mercury (Hg), e.g., mobility, bioavailability, and toxicity. Clarifying the role of DOM in binding Hg in the treatment processes of sewage sludge is important for relieving Hg contamination risks in land applications. However, the impacts of DOM on Hg binding in sewage sludge are still unclear. In this study, we investigated the evolution of Hg and its speciation in full-scale sludge anaerobic digestion (AD) with thermal hydrolysis. The role of DOM in binding Hg(II) was further analyzed. The results showed that AD with thermal hydrolysis led to an increase in the Hg content in the sludge (from 3.72 ± 0.47 mg/kg to 10.75 ± 0.16 mg/kg) but a decrease in Hg mobility (the mercury sulfide fraction increased from 60.56 % to 79.78 %). Further adsorption experiments revealed that at equivalent DOM concentrations, DOM with a low molecular weight (MW<1 kDa) in activated sludge, DOM with a medium molecular weight (1 kDa 5 kDa) in both anaerobically digested sludge and conditioned sludge showed high binding amounts of Hg(II), with 1372.54, 535.28, 942.09 and 801.51 mg Hg/g DOM, respectively. Parallel factor analysis (PARAFAC) and fluorescence quotient (FQ) results showed that tryptophan-like and tyrosine-like substances had high binding affinities for Hg(II). Furthermore, X-ray photoelectron spectroscopy (XPS) indicated that the reduced organic sulfur contained in the DOM was potentially bound to Hg through the interactions of Hg-S and Hg-O. These results indicated that DOM may play special roles in regulating Hg speciation. The association between DOM and Hg(II), such as the significant positive correlation (p < 0.05) between the dissolution rate of Hg(II) and release of tryptophan-like substances during thermal hydrolysis, suggested the potential way for removing Hg from sludge.

This study provides a comprehensive analysis of the vacuum drying process for sludge drying, with a focus on optimizing energy efficiency and emission control. The study used both lab-scale static and pilot-scale vacuum drying systems to test various parameters like vacuum levels, heat source temperatures, and sludge thicknesses. The results indicated that optimal drying conditions were achieved at a vacuum level of -0.06 MPa, a heat temperature of 140 °C, and a sludge thickness of 3.4 mm, where the drying rate reaches 0.13278 g·g-1·min-1. The study underscores the significant influence of vacuum level, temperature, and sludge thickness on drying rates. The Page model was used to analyze drying kinetics, elucidating how changes in these parameters affect drying characteristics. Furthermore, the study also examined the pollutant emissions and energy efficiency at the pilot scale. It found that high vacuum environments could efficiently dry sludge using low-temperature heat source, leading to average energy consumption per unit evaporation of 3020.29 kJ/kg, which is lower compared to traditional methods. By harnessing low-grade industrial waste heat, this can be further reduced to 875.76 kJ/kg. This study offers valuable insights for sustainable sludge management systems, highlighting the environmental and economic benefits of vacuum drying technology. The detailed experimental approach and thorough analysis make a significant contribution to the field of the sludge drying.

The development of anthroposols has been proposed as a new environmentally friendly approach to ensuring the successful revegetation of phosphate mining sites. The phosphate industry\'s by-products, including phosphogypsum (PG), phosphate sludge (PS), and sewage sludge (SS), can be valuable resources in restoring the ecological balance of mined soil areas. The aim of this study was to safely and sustainably restore the ecological integrity of the phosphate mining site through the evaluation of nutrients and heavy metals dynamics in soil and plant tissues of three tree species and treated by-products containing 65 % PG, 30 % PS, and 5 % SS. The tree species used were Pistacia atlantica, Schinus molle, and Eucalyptus globulus. The experimental layout was a randomised complete block design with six replicates and three treatments. Growth diameter, height, nutrient uptakes and heavy metal dynamic were evaluated from the rhizosphere soils and plant tissues over two years. Hierarchical head maps of correlations between the measured growth parameters, soil and nutrient uptakes of the tree species were analysed using a phylogenetic generalised linear mixed model. S. molle and E. globulus had higher average diameter and height than P. atlantica plants. P. atlantica and S. molle showed greater nitrogen, phosphorus, potassium, calcium, and magnesium concentrations than E. globulus trees. Tree growth parameters were closely linked to soil nutrient bioavailability. The heavy metal accumulation ratio was higher in the E. globulus and S. molle leaves than in stems. Using by-products could be valorised for rehabilitating mine sites together with E. globulus and S. molle species.

Sludge is an inevitable waste product of sewage treatment with a high water content and large volume, it poses a significant threat of secondary pollution to both water and the atmosphere without proper disposal. In this regard, dewatering has emerged as an attractive method in sludge treatment, as it can reduce the sludge volume, enhance its transportability and calorific value, and even decrease the production of landfill leachate. In recent years, physical conditioning methods including non-chemical conditioners or energy input alone, have been extensively researched for their potential to enhance sludge dewatering efficiency, such as thermal treatment, freeze-thaw, microwave, ultrasonic, skeleton builders addition, and electro-dewatering, as well as combined methods. The main objective of this paper is to comprehensively evaluate the dewatering capacity of various physical conditioning methods, and identify key factors affecting sludge dewatering efficiency. In addition, future research anticipated directions and outlooks are proposed. This work is expected to provide valuable insights for developing efficient, eco-friendly, and low-energy consumption techniques for deep sludge dewatering.

Phosphorus (P) is one of the essential nutrient elements for plant growth and development. Sludge compost products can be used as an important source of soil P to solve the shortage of soil P. The difference in the initial carbon-to-phosphorus ratio (C/P) will lead to difference in the bacterial community, which would affect the biological pathway of P conversion in composting. However, few studies have been reported on adjusting the initial C/P of composting to explore P conversion. Therefore, this study investigated the response of P component transformations, bacterial community and P availability to C/P during sludge composting by adjusting initial C/P. The results showed that increasing C/P promoted the mineralization of organic P and significantly increased the content of the labile P. High C/P also increased the relative content of available P, especially when the C/P was at 45 and 60, it reached 60.51% and 60.47%. High C/P caused differences in the community structure, and improved the binding ability of microbial network modules and the competitiveness of microbial communities. Additionally, high C/P strengthened the effect of microbial communities on the transformation of P components. Finally, the study showed that C/P was the main contributor to P content variation (64.7%) and indirectly affected P component conversion by affecting the microbial community. Therefore, adjusting the C/P is crucial to improve the P utilization rate of composting products.