Sludge is an inevitable waste product of sewage treatment with a high water content and large volume, it poses a significant threat of secondary pollution to both water and the atmosphere without proper disposal. In this regard, dewatering has emerged as an attractive method in sludge treatment, as it can reduce the sludge volume, enhance its transportability and calorific value, and even decrease the production of landfill leachate. In recent years, physical conditioning methods including non-chemical conditioners or energy input alone, have been extensively researched for their potential to enhance sludge dewatering efficiency, such as thermal treatment, freeze-thaw, microwave, ultrasonic, skeleton builders addition, and electro-dewatering, as well as combined methods. The main objective of this paper is to comprehensively evaluate the dewatering capacity of various physical conditioning methods, and identify key factors affecting sludge dewatering efficiency. In addition, future research anticipated directions and outlooks are proposed. This work is expected to provide valuable insights for developing efficient, eco-friendly, and low-energy consumption techniques for deep sludge dewatering.

Addressing per-and polyfluoroalkyl substances (PFAS) contamination is an urgent environmental concern. While most research has focused on PFAS contamination in water matrices, comparatively little attention has been given to sludge, a significant by-product of wastewater treatment. This critical review presents the latest information on emission sources, global distribution, international regulations, analytical methods, and remediation technologies for PFAS in sludge and biosolids from wastewater treatment plants. PFAS concentrations in sludge matrices are typically in hundreds of ng/g dry weight (dw) in developed countries but are rarely reported in developing and least-developed countries due to the limited analytical capability. In comparison to water samples, efficient extraction and cleaning procedures are crucial for PFAS detection in sludge samples. While regulations on PFAS have mainly focused on soil due to biosolids reuse, only two countries have set limits on PFAS in sludge or biosolids with a maximum of 100 ng/g dw for major PFAS. Biological technologies using microbes and enzymes present in sludge are considered as having high potential for PFAS remediation, as they are eco-friendly, low-cost, and promising. By contrast, physical/chemical methods are either energy-intensive or linked to further challenges with PFAS contamination and disposal. The findings of this review deepen our comprehension of PFAS in sludge and have guided future research recommendations.

The suitability of biochar as a supplement for environmental restoration varies significantly based on the type of feedstocks used and the parameters of the pyrolysis process. This study comprehensively examines several aspects of biochar\'s potential benefits, its capacity to enhance crop yields, improve nutrient availability, support the co-composting, water restoration and enhance overall usage efficiency. The supporting mechanistic evidence for these claims is also evaluated. Additionally, the analysis identifies various gaps in research and proposes potential directions for further exploration to enhance the understanding of biochar application. As a mutually advantageous approach, the integration of biochar into agricultural contexts not only contributes to environmental restoration but also advances ecological sustainability. The in-depth review underscores the diverse suitability of biochar as a supplement for environmental restoration, contingent upon the specific feedstock sources and pyrolysis conditions used. However, concerns have been raised regarding potential impacts on human health within agricultural sectors.

The ubiquitous free-living amoebae (FLA) are microorganisms of significant medical, sanitary, and ecological importance. However, their characterization within solid matrices such as soil, dust, sediment, mud, sludge, and compost remain to be systematized. In this study, we conducted a systematic review with meta-analysis to explore the global distribution of FLA in solid matrices. From the analysis of 104 out of 4,414 scientific articles retrieved from different databases, it was found that the general global prevalence of FLA in solid matrices was of 55.13% (95% confidence interval (CI) 49.32-60.94). Specifically, FLA prevalence was high in soil (72.40%, 95% CI 69.08-75.73), sediment (57.91%, 95% CI 50.01-65.81), mud (52.90%, 95% CI 24.01-81.78), dust (48.60%, 95% CI 43.00-54.19), and sewage sludge (40.19%, 95% CI 30.68-49.70). In aerosols it was comparatively lower (17.21%, 95% CI 12.76-21.66). Acanthamoeba spp. (52.23%) and Hartmanella/Vermamoeba spp. (36.06%) were found to be more prevalent, whereas Naegleria spp. (34.98%) and Balamuthia spp. (27.32%) were less prevalent. The distribution of the highest global prevalence values for species of Acanthamoeba spp., considering different publication periods of the studies, is as follows: A. hatchetti (51.46%), A. rhysodes (47.49%), A. polyphaga (36.37%), A. culbertsoni (34.31%), A. castellanii (34.21%), and A. lenticulata (32.82%). For other FLA species, the distribution is: Hartmannella/Vermamoeba vermiformis (91.57%), Naegleria fowleri (42.32%), Naegleria gruberi (32.39%), and Balamuthia mandrillaris (25%). The most prevalent Acanthamoeba genotypes were T4 (33.38%) and T3 (23.94%). Overall, the global prevalence of FLA in solid matrices is as high as or greater than that reported in water by previous systematic reviews. Thus, actions aimed at reducing exposure to FLA or exploring their ecological dynamics should consider not only water but also the various solid matrices. The finding outlined here can provide valuable insights for such actions, e.g., informing on the level of exposure to FLA, or on the microbial biodiversity of specific environmental compartments.

Designing the next mass vaccination campaign will require ideas and techniques from behavioral economics. History and current events have shown how failing to consider features of human behavior, from individual biases in information processing to the relationships between people and policymakers, frustrated public health efforts. Behavioral economics can inform how a vaccination campaign needs to deliver processes and information necessary to help people decide to vaccinate, especially when mandates to vaccinate are not possible. Such campaigns need to employ both \"nudges\" (i.e., promote action) and remove \"sludge\" (i.e., break down blockers) to influence decisions directly. Strategies must be both acute and systemic to the current approach to public health.

In the recent times, more attention is on industrial waste management due to the unaffordable space for dump yards and landfills and the increased charges for waste dumping. Even though the vegan revolution and plant-based meat products are booming, the traditional slaughterhouses and the wastes produced by them continue to be a concern. Waste valorisation is an established procedure striving to create a closed chain process in industries where there is no refuse. Although a highly polluting industry, slaughterhouse industry wastes have been recycled to economically viable leather since ancient times. However, the tannery industry is causing pollution in par with or even more than the slaughterhouses. Effective management of the liquid and solid wastes from the tannery is of utmost concern because of its toxicity. The hazardous wastes generated enter the food chain, causing long term impacts in the ecosystem. Several leather waste transformation processes are widely used in the industries, and they are yielding good products of economic value. However careful exploration into the processes and products of waste valorisation are often ignored as long as the transformed waste product is of higher value than the waste. The most efficient and environmentally friendly waste management technique should convert the refuse into a value-added utilization without any toxic leftovers. Zero waste concept is an extension of the zero liquid discharge concept, where the solid waste is also treated and reused to such an extent that there is no residue to be sent to the landfill. This review initially presents the existing methods for the de-toxification of tannery wastes and examines the possibility of solid waste management within the tannery industry to attain zero waste discharge.

Sludge is among the most important reservoirs of antibiotic resistance genes (ARGs), which would cause potential environmental risks with the sludge utilization. Currently, anaerobic digestion (AD) is effective to simultaneously realize the resource recovery and pollutants removal, including antibiotic resistance genes (ARGs), and various pretreatments are used to enhance the performance. Recently, plentiful publications have focused on the effects of pretreatment on ARGs removal, but the contradictory results are often obtained, and a comprehensive understanding of the research progress and mechanisms is essential. This study summarizes various pretreatment techniques for improving AD efficiency and ARGs reduction, investigates promising performance in ARGs removal when pretreatments combined with AD, and analyzes the potential mechanisms accounting for ARGs fates. The results showed that although thermal hydrolysis pretreatment showed the best performance in ARGs reduction during the pretreatment process, the significant rebound of ARGs would occur in the subsequent AD process. Conversely, ozone pretreatment and alkali pretreatment had no significant effect on ARGs abundance in the pretreatment stage, but could enhance ARGs removal by 15.6-24.3 % in the subsequent AD. Considering the efficiency and economic effectiveness, free nitrous acid pretreatment would be a promising and feasible option, which could enhance methane yield and ARGs removal by up to 27 % and 74.5 %, respectively. Currently, the factors determining ARGs fates during pretreatment and AD processes included the shift of microbial community, mobile genetic elements (MGEs), and environmental factors. A comprehensive understanding of the relationship between the fate of ARGs and pretreatment technologies could be helpful for systematically evaluating various pretreatments and facilitating the development of emerging and effective pretreatment techniques. Moreover, given the effectiveness, economic efficiency and environmental safety, we called for the applications of modern analysis approaches such as metagenomic and machine learning on the optimization of pretreatment conditions and revealing underlying mechanisms.

Biosolids, or treated sludge, are by-products of the wastewater treatment processes and are commonly used in agricultural applications to enrich soil nutrients. However, it contains microplastics, plastic particles with a diameter below 1 mm. Microplastics exist and accumulate in the environment, which can have major impacts on the ecosystem. Despite their abundance in the environment, there are to date no standardized methods for their enumeration and characterization. A literature review was conducted focusing on the occurrence of microplastics at wastewater treatment plants, particularly in the solid waste stream, and their influence on the soil ecosystem where biosolids is applied. We found a conflicting evidence to which extent microplastics negatively impact the ecosystem. Some reported either a direct negative impact of microplastics or because of microplastic interaction with other soil contaminants. Meanwhile, other studies showed no effect or at certain amount of microplastics on the ecosystem. We also found that microplastics size, shape, type, concentration, and exposure time play a critical role in their ecological impacts. However, currently, there is no unified approach for microplastics identification and characterization in solid waste resulting in a various and incomparable data. Therefore, utilizing standardized methods for microplastics analysis must be considered as the initial step to better understand the impact of microplastics onto the environment. We suggest a method\'s scaling comparison as a practical approach to select and develop techniques based on cost, time, data obtained, accuracy, and sensitivity criteria. Further research into the ecotoxicity of microplastics and continuous monitoring of biosolid applications are also necessary.

Oily sludge is a hazardous material generated from the petroleum industry that has attracted increasing research interest. Although several review articles have dealt with specific subtopics focusing on the treatment of oily sludge based on selected references, no attempt has been made to demonstrate the research trend of oily sludge comprehensively and quantitatively. This study conducted a systematic review to analyze and evaluate all oily sludge-related journal articles retrieved from the Web of Science database. The results show that an increase in oily sludge-related research did not take place until recent years and the distribution of the researchers is geographically out of balance. Most oily sludge-related articles focused on treatment for harmfulness reduction or valorization with limited coverage of formation, characterization, and environmental impact assessment of oily sludge. Pyrolytic treatment has attracted increasing research attention in recent years. So far, the research findings have been largely based on laboratory-scale experiments with insufficient consideration of the cost-effectiveness of the proposed treatment methods. Although many methods have been proposed, few alone could satisfactorily achieve cost-effective treatment goals. To enable sustainable management of oily sludge on a global scale, efforts need to be made to fund more research projects, especially in the major oil-producing countries. Pilot-scale experiments using readily available and affordable materials should be encouraged for practical purposes. This will allow a sensible cost-benefit analysis of a proposed method/procedure for oily sludge treatment. To improve the treatment performance, combined methods are more desirable. To inform the smart selection of methods for the treatment of different oily sludge types, it is suggested to develop universally accepted evaluation systems for characterization and environmental risk of oily sludge.

To promote the effective utilization of sludge and slag produced in nature and from human activities, this paper summarizes the research progress in the field of building materials on the basis of expounding their classification and characteristics. (1) Sludge and slag include silt, sludge and industrial waste residues. These three materials are mainly composed of SiO2, which can be used to produce building materials after treatment and can also be used as admixtures, including roadbed admixtures. (2) Silt and sludge are widely used in building wall materials and roadbed materials, etc. Industrial waste residues can be used in the production and processing of green concrete and glass-ceramics. (3) In addition to continuing to use existing utilization methods, key treatment technologies and new treatment devices can be further developed according to the characteristics of sludge and slag. Moreover, observations and mechanistic analysis of the microscopic structure of industrial waste residues and research on strong and weak utilization methods based on the performance of building materials can be carried out, and more efficient and energy-saving excitation or activation technologies will be developed. These efforts will eventually lead to the development of functional building materials with excellent performance and environmentally friendly characteristics to achieve the differentiated utilization of silt, sludge, and industrial waste residues and realize the efficient transformation of resources. This paper provides useful insights for the application of sludge and slag in the field of building materials.