With the large-scale application of lithium-ion batteries (LIBs), a huge amount of spent LIBs will be generated each year and how to realize their recycling and reuse in a clean and effective way poses a challenge to the society. In this work, using the electrolyte of spent LIBs as solvent, we in-situ fluorinate the conductive three-dimensional porous copper foam by a facile solvent-thermal method and then coating it with a cross-linked sodium alginate (SA) layer. Benefiting from the solid-electrolyte interphase (SEI) that accommodating the volume change of internal CuF2 core and SA layer that inhibiting the dissolution of CuF2, the synthesized CuF2@void@SEI@SA cathode with a pomegranate-like structure (yolk-shell) exhibits a large reversible capacity of ~535 mAh g-1 at 0.05 A g-1 and superb cycling stability. This work conforms to the development concept of green environmental protection and comprehensively realizes the unity of environmental, social and economic benefits.

Plant phenolics have been known for various biological activities. This study aims to extract and examine the presence of phenolics in Bao mango (Mangifera indica L. var.) peel ethanolic extract (MPE). Further, antioxidant, anti-diabetic (α-amylase, and α-glucosidase inhibitory activity), and anti- Alzheimer\'s disease (AD) (acetylcholinesterase (AChE), butyrylcholinesterase (BChE), and β-secretase (BACE-1) inhibitory activity) efficacy of MPE were determined. The results indicated that mangiferin (8755.89 mg/ 100 g extract) was the major phenolic compound in MPE. An antioxidant mechanism revealed that MPE had a higher radical scavenging ability (4266.70 µmol TE/g extract) compared to reducing power (FRAP) or oxygen radical absorption capacity (ORAC). Further in-vitro enzyme inhibitory assay against diabetic and AD involved enzymes showed that MPE had stronger inhibitory action against an enzyme involved in diabetes compared to their standard drug (Acarbose) (P < 0.05). While a lower IC50 value was observed against AD-involved enzymes compared to their standard drug (donepezil) (P < 0.05). The results show that Thai Bao mango peel byproduct can be a potential source of nutraceuticals to lower diabetes and improve cognitive health.

A highly sensitive, selective and recyclable histidine detection method based on magnetic Fe3O4@mTiO2 (M-TiO2) nanocomposites with SERRS was developed. Mesoporous M-TiO2 nanoparticles were functionalized with 4-aminothiophenol and then coupled with histidine through an azo coupling reaction in 5 min, producing the corresponding azo compound. The strong and specific SERRS response of the azo product allowed for ultrasensitive and selective detection for histidine with an M-TiO2 device loaded with Ag NPs due to the molecular resonance effect and plasmonic effect of Ag NPs under a 532 nm excitation laser. The sensitivity was further enhanced with the magnetic enrichment of M-TiO2. The limit of detection (LOD) was as low as 8.00 × 10-12 mol/L. The M-TiO2 demonstrated applicability towards histidine determination in human urine without any sample pretreatment. Additionally, the M-TiO2 device can be recycled for 3 cycles with the photodegradation of the azo product under UV irradiation due to TiO2-assisted and plasmon-enhanced photocatalysis. In summary, a multifunctional and recyclable M-TiO2 device was synthesized based on azo coupling and SERRS spectroscopy for ultra-sensitive and specific histidine sensing. In addition, the proposed system demonstrated the potential for the multiplex determination of toxic compounds in the fields of food safety, industrial production and environmental protection, which benefit from the fingerprint property and universality of SERRS.

Massive accumulation of postconsumer plastic waste in eco-system has raised growing environmental concerns. Sustainable end-of-life managements of the indispensable plastic are highly demanding and challenging in modern society. To relieve the plastic menace, herein we present a full life cycle sustainable supramolecular bioplastic made from biomass-derived polyelectrolyte (chitosan quaternary ammonium salt, QCS) and natural sodium fatty acid (sodium laurate, SL) through solid-phase molecular self-assembly (SPMSA), by which the QCS-SL complexes, precipitated from mixing the aqueous solutions, self-assemble to form bioplastic film by mildly pressing at room temperature. The QCS-SL bioplastic films display superior hydroplasticity owing to the water-activated molecular rearrangement and electrostatic bond reconstruction, which allows facile self-healing and reprocessing at room temperature to significantly extend the service lifetime of both products and raw materials. With higher water content, the dynamic electrostatic interactions and precipitation-dissolution equilibrium endow the QCS-SL bioplastic films with considerable solubility in water, which is promising to mitigate the plastic accumulation in aquatic environment. Because both QCS and SL are biocompatible and biodegradable, the dissolved QCS-SL films are nontoxic and environmentally friendly. Thus, this novel supramolecular bioplastic is highly sustainable throughout the whole life cycle, which is expected to open a new vista in sustainable plastic materials.

ABSTRACTThe Ministry of Environment of Korea has proposed a ban on landfill disposal of municipal solid waste (MSW) from 2026. Thus, it is inferred that the amount of incineration ash will increase drastically. Against this backdrop, this study assessed the applicability of a plasma melting process to fly ash. Fly ash was collected from 14 incineration facilities to analyze its basic properties and perform melting experiments. Furthermore, scanning electron microscope (SEM) analysis and economic feasibility assessment were conducted. The molten fly ash slag exhibited a pH value of 9.9, and the ignition loss of fly ash was found to range from 14.5 to 25.7 wt.%. None of seven toxic elements (arsenic (As), cadmium (Cd), cyanide (CN), mercury (Hg), hexavalent chromium (Cr(VI)), copper, and lead (Pb)) was detected from the molten slag. In addition, 99.3 wt.% of chloride ion (Cl-), 97.9 wt.% of fluoride ion (F-), and 98.1 wt.% of sulphate ion (SO42-) were removed. The contents in the molten slag were found to be 0.19, 7.8, 27.8, 33.1, and 38 mg/kg for Cd, Pb, zinc, nickel, and F, respectively, and none of CN, Hg, and As was detected, thereby meeting the criteria for soil pollution. All of the environmental standards were met, and SEM analysis confirmed stable quality with high density and no surface pore. In the economic feasibility assessment, a profit of approximately 152.4 $/ton was also estimated compared to landfill disposal.

Glass was introduced as an additive to filaments used for the manufacturing of composite materials, employed by Additive Manufacturing applications. Glass accounts for a large waste electric and electronic equipment (WEEE) percentage, and its recovery and recycling can lead to the production of sustainable composite materials. In this work, poly(lactic acid) (PLA)/commercially available silicon oxide composite filaments were manufactured and their structural, thermal, rheological, and mechanical properties were assessed. Scanning Electron Microscopy confirmed the 1:2 ratio of silicon: oxygen, along with the relatively low adhesion between the filler and the matrix. Differential Scanning Calorimetry presented steady glass transition and melting temperatures of composites, whereas a crystallization temperature of 10% wt. and a crystallinity of 15% wt. composite slightly increased. Rheological analysis showcased that the viscosity of the composite filaments decreased compared to PLA (10-100 compared to 300-400 Pa·s), with a more shear-thinning behavior. Dynamic mechanical analysis exhibited increased elastic, flexural moduli, and flexural strength of composites (up to 16, 23, and 11%, respectively), whereas tensile strength and elongation decreased. The affordability of raw materials (with the future introduction of recycled ones) and the minimal processing steps can lead to the potential scaling up of the study.

Rational reusing the waste materials in spent batteries play a key role in the sustainable development for the future lithium-ion batteries. In this work, we propose an effective and facile solid-state-calcination strategy for the recycling and regeneration of the cathode materials in spent LiNi0.5Co0.2Mn0.3O2 (NCM523) ternary lithium-ion batteries. By systemic physicochemical characterizations, the stoichiometry, phase purity and elemental composition of the regenerated material were deeply investigated. The electrochemical tests confirm that the material characteristics and performances got recovered after the regeneration process. The optimal material was proved to exhibit the excellent capacity with a discharge capacity of 147.9 mAh g-1 at 1 C and an outstanding capacity retention of 86% after 500 cycles at 1 C, which were comparable to those of commercial NCM materials.

Over 944 thousand tonnes of shrimp carcasses are produced worldwide during the shrimp production cycle, and black soldier fly larvae (BSFL) are a potential solution for this shrimp carcass accumulation. In this study, we evaluated the performance of BSFL feeding on shrimp carcasses. Six combinations of wheat bran and shrimp carcass powder (with replacement increments of 20 %) and one whole shrimp carcasses treatment were tested. The bioconversion rate (27.15 ± 3.66 %; p = 0.001), crude protein (55.34 ± 1.27 %; p < 0.001), and crude lipid (14.37 ± 1.86 %; p = 0.007) values of BSFL reared on whole shrimp carcasses were significantly higher than those of BSFL reared on wheat bran. Increasing the shrimp carcass amount in the feeding media resulted in significant increases in BSFL docosahexaenoic acid (with the highest value occurring for BSFL reared on whole shrimp carcasses; 1.46 ± 0.09 %; p < 0.001). Conversely, BSFL docosahexaenoic acid was not detected for BSFL reared on wheat bran. The detected heavy metal concentrations in BSFL were below the limits of the published international guidelines for animal feed. In the obtained BSFL, Salmonella was not detected, and the mould count was <10 CFU/g. The total bacterial count (Lg transformation) of obtained BSFL ranged from 7.88 to 8.07 CFU/g, and no significant differences among all treatments (p = 0.424). Overall, this study demonstrates that BSFL-based bioconversion presents a resource recovery technology for converting shrimp carcasses into high-value nutritional biomass.

This study developed advanced ceramic materials with both healing and decomposition functions using a metastable product generated under superheated steam. The developed composite material comprises ZrC particles dispersed in a yttria-stabilized zirconia (YSZ) matrix. After introducing a surface crack of approximately 120 μm on the composite specimen, it showed a complete strength recovery rate after one hour of heat treatment under superheated steam at 400 °C, while it exhibited a decomposition behavior after one hour of heat treatment in air at 400 °C. The XRD analysis of the heat-treated specimens showed that the final product was monoclinic ZrO2 under both steam and air conditions. In other words, full strength recovery in superheated steam was achieved by a chain reaction involving metastable intermediate products derived from H2O, unlike the reaction in air.

Large-scale lithium-ion batteries (LIBs) are overtaking as power sources for electric vehicles and grid-scale energy-storage systems for renewable sources. Accordingly, large amounts of LIBs are expected to be discarded in the near future. Recycling technologies for waste LIBs, particularly for valuable rare metals (Li, Co, and Ni) used in cathode active materials, need to be developed to construct continuous LIB supply chains. Various recovery methodologies, such as pyrometallurgy, hydrometallurgy, and direct recycling, as well as their advantages, disadvantages, and technical features, are briefly introduced. We review the electrochemical performances of these cathode active materials based on recycled rare metals from LIB waste. Moreover, the physicochemical properties and electrochemical performance of the cathode active materials with impurities incorporated during recycling, which have high academic significance, are outlined. In hydrometallurgy-based LIB recycling, the complete removal of impurities in cathode active materials is not realistic for the mass and sustainable production of LIBs; thus, optimal control of the impurity levels is of significance. Meanwhile, the studies on the direct recycling of LIB showed the necessity of almost complete impurity removal and restoration of physicochemical properties in cathode active materials. This review provides a survey of the technological outlook of reusing cathode active materials from waste LIBs.