The creation of hydrogen using the lower-cost feedstock, waste organics (WOs), e.g. kitchen waste bio-oil, is a win-win solution, because it can both solve energy problems and reduce environmental pollution. Ultrasound has received considerable interest in organic decomposition; however, the application of ultrasound alone is not a good choice for the hydrogen production from WOs, because of the energy consumption and efficiency. To boost the hydrogen production based on ultrasonic cavitation cracking of bio-oil, photothermal materials are introduced into the hydrogen production system to form localized hot spots. Materials carbon black (CB), carbon nanotubes (CNT), and silicon dioxide (SiO2) all exhibit significant enhancing effects on the hydrogen production from bio-oil, and the CB exhibits the most significant strengthening effect among these materials. When the dosage of CB is 5 mg, hydrogen production rate is 180.1 μmol · h-1, representing a notable 1.7-fold increase compared to the production rate without CB. In the presence of light and ultrasound, the hydrogen production rate can be increased by 66.7-fold compared to the situation where only light is present without ultrasound.

Microbial applications in agriculture and industry have gained significant attention due to their potential to address environmental challenges and promote sustainable development. Among these, the genus Pseudomonas stands out as a promising candidate for various biotechnological uses, thanks to its metabolic flexibility, resilience, and adaptability to diverse environments. This review provides a comprehensive overview of the current state and future prospects of microbial fuel production, bioremediation, and sustainable development, focusing on the pivotal role of Pseudomonas species. We emphasize the importance of microbial fuel as a renewable energy source and discuss recent advancements in enhancing biofuel generation using Pseudomonas strains. Additionally, we explore the critical role of Pseudomonas in bioremediation processes, highlighting its ability to degrade a wide spectrum of pollutants, including hydrocarbons, pesticides, and heavy metals, thereby reducing environmental contamination. Despite significant progress, several challenges remain. These include refining microbial strains for optimal process efficiency and addressing ecological considerations. Nonetheless, the diverse capabilities of Pseudomonas offer promising avenues for innovative solutions to pressing environmental issues, supporting the transition to a more sustainable future.

Introduction Surface roughness (Ra) significantly impacts the aesthetic and functional qualities of dental prosthetics. Traditional polishing involves pumice, a material routinely used in dental practice. This study introduces Algishine as a potential cost-effective eco-friendly alternative. Materials and methods A 3D design software (Geomagic) created a Standard Tesselation Language (STL) file of 10 mm x 10 mm x 2 mm. 30 STL file outputs were generated. The output was milled in wax. This was then flasked and processed. 30 acrylic resin specimens were fabricated and divided into two groups. Group A was polished using traditional pumice, and Group B was polished using Algishine. The Ra of each sample was measured using surface profilometry, with three readings per sample averaged for each group. Results Kruskal-Wallis test was performed to compare the two groups with the pre-testing samples, which showed p<0.05; indicating that there was a significant difference between the two groups. The average Ra value for unpolished acrylic was 7.105, while the specimens polished with pumice showed an Ra value of 2.218; specimens polished with novel material Algishine showed an Ra value of 1.743. This illustrates that Algishine achieves surface smoothness significantly superior to commonly used polishing agent and pumice. Discussion The results of our study demonstrate that Algishine, a novel polishing material derived from recycled alginate, effectively reduces the Ra of acrylic resin. This finding has significant implications, both clinically and environmentally. The primary clinical benefit of a smoother acrylic resin surface is the enhanced aesthetic appearance and increased patient comfort. A polished surface reduces plaque accumulation, thereby decreasing the risk of oral infections and improving the longevity of the dental prosthesis. The results show that Algishine achieves surface smoothness comparable to or better than pumice indicating that it can maintain, if not enhance, these clinical outcomes. Dental professionals can confidently use Algishine, knowing it meets the high standards required for patient care. Conclusion Algishine effectively reduces the Ra of acrylic resin, suggesting it is a viable, eco-friendly alternative to traditional pumice for dental polishing procedures. This indicates potential benefits in maintaining clinical outcomes while promoting environmental sustainability.

As robot numbers in the home increase, creating a market for second-hand robotic systems is essential to reduce the waste impact of the industry. Via a survey, consumer attitudes of United Kingdom participants towards second-hand robots were investigated; finding that second-hand robots with guarantees have an equal purchasing interest compared to new systems, highlighting the opportunity for manufacturers and retailers to develop certification standards for second-hand robots to move towards a circular economy. Consumer demographics also demonstrated that those most open to the purchase of both new and second-hand systems were women, those aged 18-25 years old, and those who have previously owned a robot for the home. Participants\' prior ownership of second-hand electronic devices (such as phones and laptops) did not affect rates of interest for second-hand robotic systems suggesting that the technology is still too new for people to be able to project their experience of current second-hand electronics to that of a robot. Additionally, this research found the robotics industry can consider the potential market for second-hand robots to be more similar to the second-hand smartphone market than to the household electronics market, and lessons learnt from the concerns raised by consumers for other internet-enabled electronic devices are similar to those concerns for second-hand robots. This provides an opportunity for the industry to break down the barriers for a circular economy earlier in the technology maturity process than has been seen for other electronics.

With the large-scale application of lithium-ion batteries (LIBs), a huge amount of spent LIBs will be generated each year and how to realize their recycling and reuse in a clean and effective way poses a challenge to the society. In this work, using the electrolyte of spent LIBs as solvent, we in-situ fluorinate the conductive three-dimensional porous copper foam by a facile solvent-thermal method and then coating it with a cross-linked sodium alginate (SA) layer. Benefiting from the solid-electrolyte interphase (SEI) that accommodating the volume change of internal CuF2 core and SA layer that inhibiting the dissolution of CuF2, the synthesized CuF2@void@SEI@SA cathode with a pomegranate-like structure (yolk-shell) exhibits a large reversible capacity of ~535 mAh g-1 at 0.05 A g-1 and superb cycling stability. This work conforms to the development concept of green environmental protection and comprehensively realizes the unity of environmental, social and economic benefits.

Plant phenolics have been known for various biological activities. This study aims to extract and examine the presence of phenolics in Bao mango (Mangifera indica L. var.) peel ethanolic extract (MPE). Further, antioxidant, anti-diabetic (α-amylase, and α-glucosidase inhibitory activity), and anti- Alzheimer\'s disease (AD) (acetylcholinesterase (AChE), butyrylcholinesterase (BChE), and β-secretase (BACE-1) inhibitory activity) efficacy of MPE were determined. The results indicated that mangiferin (8755.89 mg/ 100 g extract) was the major phenolic compound in MPE. An antioxidant mechanism revealed that MPE had a higher radical scavenging ability (4266.70 µmol TE/g extract) compared to reducing power (FRAP) or oxygen radical absorption capacity (ORAC). Further in-vitro enzyme inhibitory assay against diabetic and AD involved enzymes showed that MPE had stronger inhibitory action against an enzyme involved in diabetes compared to their standard drug (Acarbose) (P < 0.05). While a lower IC50 value was observed against AD-involved enzymes compared to their standard drug (donepezil) (P < 0.05). The results show that Thai Bao mango peel byproduct can be a potential source of nutraceuticals to lower diabetes and improve cognitive health.

A highly sensitive, selective and recyclable histidine detection method based on magnetic Fe3O4@mTiO2 (M-TiO2) nanocomposites with SERRS was developed. Mesoporous M-TiO2 nanoparticles were functionalized with 4-aminothiophenol and then coupled with histidine through an azo coupling reaction in 5 min, producing the corresponding azo compound. The strong and specific SERRS response of the azo product allowed for ultrasensitive and selective detection for histidine with an M-TiO2 device loaded with Ag NPs due to the molecular resonance effect and plasmonic effect of Ag NPs under a 532 nm excitation laser. The sensitivity was further enhanced with the magnetic enrichment of M-TiO2. The limit of detection (LOD) was as low as 8.00 × 10-12 mol/L. The M-TiO2 demonstrated applicability towards histidine determination in human urine without any sample pretreatment. Additionally, the M-TiO2 device can be recycled for 3 cycles with the photodegradation of the azo product under UV irradiation due to TiO2-assisted and plasmon-enhanced photocatalysis. In summary, a multifunctional and recyclable M-TiO2 device was synthesized based on azo coupling and SERRS spectroscopy for ultra-sensitive and specific histidine sensing. In addition, the proposed system demonstrated the potential for the multiplex determination of toxic compounds in the fields of food safety, industrial production and environmental protection, which benefit from the fingerprint property and universality of SERRS.

Massive accumulation of postconsumer plastic waste in eco-system has raised growing environmental concerns. Sustainable end-of-life managements of the indispensable plastic are highly demanding and challenging in modern society. To relieve the plastic menace, herein we present a full life cycle sustainable supramolecular bioplastic made from biomass-derived polyelectrolyte (chitosan quaternary ammonium salt, QCS) and natural sodium fatty acid (sodium laurate, SL) through solid-phase molecular self-assembly (SPMSA), by which the QCS-SL complexes, precipitated from mixing the aqueous solutions, self-assemble to form bioplastic film by mildly pressing at room temperature. The QCS-SL bioplastic films display superior hydroplasticity owing to the water-activated molecular rearrangement and electrostatic bond reconstruction, which allows facile self-healing and reprocessing at room temperature to significantly extend the service lifetime of both products and raw materials. With higher water content, the dynamic electrostatic interactions and precipitation-dissolution equilibrium endow the QCS-SL bioplastic films with considerable solubility in water, which is promising to mitigate the plastic accumulation in aquatic environment. Because both QCS and SL are biocompatible and biodegradable, the dissolved QCS-SL films are nontoxic and environmentally friendly. Thus, this novel supramolecular bioplastic is highly sustainable throughout the whole life cycle, which is expected to open a new vista in sustainable plastic materials.

ABSTRACTThe Ministry of Environment of Korea has proposed a ban on landfill disposal of municipal solid waste (MSW) from 2026. Thus, it is inferred that the amount of incineration ash will increase drastically. Against this backdrop, this study assessed the applicability of a plasma melting process to fly ash. Fly ash was collected from 14 incineration facilities to analyze its basic properties and perform melting experiments. Furthermore, scanning electron microscope (SEM) analysis and economic feasibility assessment were conducted. The molten fly ash slag exhibited a pH value of 9.9, and the ignition loss of fly ash was found to range from 14.5 to 25.7 wt.%. None of seven toxic elements (arsenic (As), cadmium (Cd), cyanide (CN), mercury (Hg), hexavalent chromium (Cr(VI)), copper, and lead (Pb)) was detected from the molten slag. In addition, 99.3 wt.% of chloride ion (Cl-), 97.9 wt.% of fluoride ion (F-), and 98.1 wt.% of sulphate ion (SO42-) were removed. The contents in the molten slag were found to be 0.19, 7.8, 27.8, 33.1, and 38 mg/kg for Cd, Pb, zinc, nickel, and F, respectively, and none of CN, Hg, and As was detected, thereby meeting the criteria for soil pollution. All of the environmental standards were met, and SEM analysis confirmed stable quality with high density and no surface pore. In the economic feasibility assessment, a profit of approximately 152.4 $/ton was also estimated compared to landfill disposal.

Glass was introduced as an additive to filaments used for the manufacturing of composite materials, employed by Additive Manufacturing applications. Glass accounts for a large waste electric and electronic equipment (WEEE) percentage, and its recovery and recycling can lead to the production of sustainable composite materials. In this work, poly(lactic acid) (PLA)/commercially available silicon oxide composite filaments were manufactured and their structural, thermal, rheological, and mechanical properties were assessed. Scanning Electron Microscopy confirmed the 1:2 ratio of silicon: oxygen, along with the relatively low adhesion between the filler and the matrix. Differential Scanning Calorimetry presented steady glass transition and melting temperatures of composites, whereas a crystallization temperature of 10% wt. and a crystallinity of 15% wt. composite slightly increased. Rheological analysis showcased that the viscosity of the composite filaments decreased compared to PLA (10-100 compared to 300-400 Pa·s), with a more shear-thinning behavior. Dynamic mechanical analysis exhibited increased elastic, flexural moduli, and flexural strength of composites (up to 16, 23, and 11%, respectively), whereas tensile strength and elongation decreased. The affordability of raw materials (with the future introduction of recycled ones) and the minimal processing steps can lead to the potential scaling up of the study.