This study investigates the synthesis and characterization of KSrVO4 phosphors doped with Er3+ ions using combustion synthesis route by using urea as a fuel. X-ray diffraction analysis confirmed the orthorhombic phase and nano-scale crystallite size of around 21 nm, while transmission electron microscopy showed spherical and rod-shaped morphologies. The studies detected upconversion emission spectra at 526, 542 and 643 nm, representing green and red transitions under 980 nm excitation. Downshifting emissions under 350 nm excitation revealed peaks at 492, 544 and 680 nm. The critical quenching concentration was 2.5 mol%, resulting from dipole-quadrupole interactions among dopant ions. The direct and indirect optical band gaps were calculated as 3.61 and 3.41 eV, respectively. The calculated chromaticity coordinates and color correlated temperature values of the phosphor surpassed 5000 K, suggesting its viability for cool LED applications. These findings emphasize KSrVO4:Er3+ as a promising greenish component in white LEDs and a potent upconverting luminescence material for bio-imaging and photovoltaics.

Pedalium Murex leaf extract was used in this study to create Nickel-doped Cerium oxide (Ni-CeO2) nanoparticles at 3 mol% and 5 mol% molar concentrations. The biosynthesized process was applied for the fabrication of Ni-CeO2 NPs. The X-ray diffraction method was used to identify their crystal structure. The XRD measurements showed that the Ni-CeO2 NPs crystallized into the face-centred cubic system. Fourier transform infrared spectral study was applied to explore the molecular vibrations and chemical bonding. The surface texture and chemical ingredients of Ni-CeO2 NPs were studied using field-emission scanning electron microscopy and energy-dispersive X-ray analysis. The EDX mapping spectra illustrate the uniform dispersal of Ce, Ni, and O atoms over the sample\'s surface. X-ray photoelectron spectroscopy (XPS) was conducted to confirm the chemical state of the Ni-CeO2 NPs. UV-Vis spectrum study was performed to ascertain the photon absorption, bandgap, and Urbach edge of Ni-CeO2 NPs. Photoluminescence (PL) research has been used to study the light-emitting characteristic of Ni-CeO2 NPs. The emissive intensity transition corresponding to Ni-CeO2 NPs was found to increase with the dopant level. The CIE 1931 chromaticity map was plotted to find the aptness of the samples for optical uses. The antifungal ability of Ni-CeO2 NPs was evaluated against the fungi candida albicans and candida krusein with the agar well-diffusion process. The fungicidal activity of the 3 mol% Ni doped CeO2 nanoparticles has shown a maximum zone of inhibition. The experimental findings illustrate the utility of Ni-CeO2 NPs for optical and antifungal applications.

Research indicates that COVID-19 has had adverse effects on the mental health of adolescents, exacerbating their negative psychological states. The purpose of this study is to investigate the impact of Physical Literacy (PL) on Negative Mental State caused by COVID-19 (NMSC) and identify potential factors related to NMSC and PL in Chinese adolescents. This cross-sectional study involved a total of 729 Chinese high school students with an average age of 16.2 ± 1.1 years. Participants\' demographic data, PL data, and NMSC data were collected. PL and NMSC were measured using the self-reported Portuguese Physical Literacy Assessment Questionnaire (PPLA-Q), the Stress and Anxiety to Viral Epidemics-6 (SAVE-6), and the Fear of COVID-19 Scale (FCV-19). Adolescents in the current study demonstrated higher levels of NMSC and lower PL, with average scores of 3.45 and 2.26, respectively (on a scale of 5). Through multiple linear regression analysis, Motivation (MO), Confidence (CO), Emotional Regulation (ER), and Physical Regulation (PR) were identified as factors influencing NMSC in adolescents. The study findings contribute to providing guidance for actions aimed at alleviating NMSC among adolescents.

Lead halide perovskites possess great application potential in flexible displays and wearable optoelectronics owing to their prominent optoelectronic properties. However, the intrinsic instability upon moisture, heat, and ultraviolet (UV) light irradiation hinders their development and application. In this work, an ultra-stable CsPbX3 (X = Cl, Br, I) perovskite luminescent filament (PLF) with high stretchability (≈2400%) and luminescence performance (photoluminescence quantum yield (PLQY) of 24.5%, tunable emission spectrum, and high color purity) is introduced by a facile environmental-friendly wet-spinning technology via solvent extraction. Benefiting from the in situ encapsulation of the hydrophobic thermoplastic polyurethane (TPU) and the chelation of Lewis base CO in TPU with Lewis acid Pb2+, the CsPbBr3 PLF demonstrates ultra-high photoluminescence (PL) stability when stored in ambient air and high humidity circumstance, annealed at 50 °C, and dipped in water for 30 days, illuminated under ultraviolet light for 300 min, and immersed in organic solvents and solutions with pH of 1-13 for 5 min, respectively. Impressively, it retains 80% of its initial PL after being recycled five times. Overall, the CsPbX3 PLF demonstrates promising prospects in multifunctional applications, including organic dyes and tensile strain sensing, flexible pattern displays, secondary anti-counterfeiting, and hazard warning systems.

We designed a multi-modal biosensing platform for versatile detection of penicillin based on a unique Ag-ZnIn2S4@Ag-Pt signal probe-sensitized UiO-66 metal-organic framework. Firstly, a large number of Ag-ZnIn2S4 quantum dots (AZIS QDs) were attached to Ag-Pt NPs, preparing a new multi-signal probe AZIS QDs@Ag-Pt NPs with excellent photoelectrochemistry (PEC), electrochemiluminescence (ECL), and fluorescence (FL) signals. Moreover, the AZIS QDs@Ag-Pt NPs signal probe can well match the energy level of UiO-66 metal-organic framework (MOF) with good photoelectric property, which can reverse the PEC current of UiO-66 to reduce false positives in detection. When penicillin was present, it bound to its aptamer to release the multifunctional signal probes, which can generate PEC, ECL, and PL signals, thus realizing ultrasensitive detection of penicillin by multi-signals. This work creates a novel three-signal QDs probe, which makes a great contribution to multi-mode photoelectric sensing analysis. The LOD of this work (3.48 fg·mL-1) was much lower than the MRLs (Maximum Residue Levels) established by the EU (4 ng·mL-1). The newly developed multi-mode biosensor has good practical application values in various biological detection, food assay, and early disease diagnosis.

The influence of n-octylammonium iodide (OAI, passive layer) on the types of phases formed in a (MACl)0.33FA0.99MA0.01Pb(I0.99Br0.01)3 perovskite film was studied using X-ray diffraction. Using UV spectrophotometric techniques, it was determined how varied OAI additive layer ratios affected the linear and nonlinear optical characteristics of glass substrates/FTO/compact TiO2/mesoporous TiO2/(MACl)0.33FA0.99MA0.01Pb(I0.99Br0.01)3 films. All films\' direct optical bandgap energies were determined to be 1.54 eV. The effects of OAI addition on the films\' photoluminescence intensity and emitted colors were also investigated. For the fabricated perovskite solar cells (PSCs) without an OAI passivation layer, the corresponding power conversion efficiency (PCE), open-circuit voltage (VOC), short-circuit current density (JSC), and fill factor (FF) values were 18.8%, 1.02 V, 24.6 mAcm-2, and 75%, respectively. When the concentration of OAI reached 2 mg, the maximum obtained values of PCE, VOC, JSC, and FF were 20.2%, 1.06 V, 24.2 mAcm-2, and 79%, respectively. The decreased trap density and increased recombination resistance were responsible for the improvement in solar cell performance.

Here we present comparative studies of: (i) the formation of ZnO thin films via the sol-gel method using zinc acetate dihydrate (ZAD), 2-methoxyethanol (ME) as solvent, and the aminoalcohols (AA): ethanolamine, (S)-(+)-2-amino-1-propanol, (S)-(+)-2-amino-3-methyl-1-butanol, 2-aminophenol, and aminobenzyl alcohol, and (ii) elemental analyses, infrared spectroscopy, X-ray diffraction, scanning electron microscopy, absorption and emission spectra of films obtained after deposition by drop coating on glass surface, and thermal treatments at 300, 400, 500 and 600 °C. The results obtained provide conclusive evidences of the influence of the AA used (aliphatic vs. aromatic) on the ink stability (prior to deposition), and on the composition, structures, morphologies, and properties of films after calcination, in particular, those due to the different substituents, H, Me, or iPr, and to the presence or the absence of a -CH2 unit. Aliphatic films, more stable and purer than aromatic ones, contained the ZnO wurtzite form for all annealing temperatures, while the cubic sphalerite (zinc-blende) form was also detected after using aromatic AAs. Films having frayed fibers or quartered layers or uniform yarns evolved to \"neuron-like\" patterns. UV and photoluminescence studies revealed that these AAs also affect the optical band gap, the structural defects, and photo-optical properties of the films.

Novel multifunctional ZnO:Gd@ZIF-8 hybrid inorganic-organic nanocomposites with tunable luminescent-magnetic performance were successfully fabricated using wet chemistry synthesis routes. Physico-chemical characterization including crystal structure, phase compositions, morphology, surface properties, as well as photoluminescent and magnetic characteristics was performed using powder X-ray diffraction (XRD), FT-IR analysis, transmission and scanning electron microscopies (TEM/SEM), N2 adsorption/desorption, SQUID magnetometer, and photoluminescence spectroscopy. The biological studies of obtained materials, such as cytotoxicity profile and in vitro MRI imaging also investigated for potential use as contrast agents. Results showed that the doping with Gd3+ in a broad concentration range and the presence of ZIF-8 layer on ZnO affect the physico-chemical properties of the obtained composites. The obtained porous ZnO:Gd@ZIF-8 composites were highly crystalline with a large surface area. The XRD study indicated the formation of hexagonal wurtzite structure for ZnO and ZnO:Gd3+ (1-5 at.%). Luminescent studies showed, that ZnO is an ideal matrix for the incorporation of Gd3+ ions in a broad concentration range with efficient green luminescence. The PL intensity reached the maximum up to 5 at.% of Gd3+. The zeta potential values indicated the good stability of obtained nanoparticles. Proposed new materials with paramagnetic behavior and outstanding MR imaging capability could be used as potential contrast agents for magnetic resonance imaging.

In this investigation, ferric (Fe) and nickel (Ni) co-doped tin oxide (SnO2) nanoparticles structural, optical, morphological, and antibacterial characteristics were synthesised, characterised, and examined. By employing SnCl2·2H2O and the transition metal precursors FeCl3 and NiCl2·6H2O with various Fe/Ni molar ratios, thermal annealing was carried out at a high temperature (700 °C). X-ray diffraction (XRD), UV-Visible spectroscopy, Photoluminescence (PL), FT-IR, and scanning electron microscopy (SEM) with energy dispersive X-ray techniques (EDX) were used to examine the materials\' structural, chemical, optical, morphological, and anti-microbial capabilities. The average particle size of pure and co-doped SnO2 nanoparticles was determined to be around 52 nm and 15 nm, and SnO2 crystallites were observed to present tetragonal rutile structure with space group P42/mmm (No.136). Metal ions were replaced in the Sn lattice, as shown by Fe and Ni co-doped SnO2 nanoparticles. Pure and co-doped samples have capsule and sphere-like features in their SEM morphology. Using UV-visible diffuse reflectance spectroscopy, the optical property was examined, and it was observed that the band gaps for pure and co-doped SnO2 were 3.73 eV and 3.53 eV, respectively. The functional groups and incorporation of Fe and Ni in the prepared powder were also validated by FT-IR and EDX studies. By utilising the agar well diffusion technique and Nutrient agar, the antibacterial properties of pure, Ni-Fe co-doped SnO2 nanoparticles annealed at 700 °C were assessed. They were evaluated against various Gram-positive bacteria (Staphylococcus pheumoniae) and Gram-negative bacteria (Shigella dysenteria). The zone of incubation was found against the Gram +Ve and Gram -Ve bacterial strains.

UNASSIGNED: To investigate the diversity and average values of bifurcation angles in a large population to help develop new methods.
UNASSIGNED: One thousand five individuals (504 females, 501 male) who visited the Cardiology Polyclinic of Fırat University Hospital with the complaint of chest pain between 2010 and 2015 were evaluated retrospectively. Bifurcation angle measurements between LMCA-CX, CX-LAD, LMCA-LAD, CX-OM1, CX-OM2, LAD-D1, LAD-D2, RCA-RMD, RCA-RVD and PDA-PL were evaluated in all cases.
UNASSIGNED: Bifurcation angles between LMCA-LAD, LMCA-Cx and LAD-Cx branches with \"> 90 wide angle bifurcations\", and Cx-OM1, Cx-OM2, LAD-D1, LAD-D2, RCA-RMD and PDA-PL with \"<70 Y type bifurcation angle\" were found to be high in male and female individuals. The RCA-RVD in female individuals was \"<70 Y-type bifurcation\" in 14 (2.8%) people, \"> 70-90 T-type bifurcation\" in 209 (41.5%) people, and \"> 90 wide angle bifurcation\" in 281 (55.8%) people. Results for male subjects were compatible with this. The correlations of all angles were examined. Robust positive correlations (p≤0.001) were found for the angular measurements between the main branches and the side branches (Cx-OM1, Cx-OM2, LAD-D1, LAD-D2 and RCA-RMD, PDA-PL).
UNASSIGNED: With the help of developing technology, we believe that all this coronary angiography data will guide bifurcation stent techniques, which are essential alternatives to bypass.