Erythritol is a natural non-caloric sweetener, which is produced by fermentation and extensively applied in food, medicine and chemical industries. The final step of the erythritol synthesis pathway is involved in erythritol reductase, whose activity and NADPH-dependent become the limiting node of erythritol production efficiency. Herein, we implemented a strategy combining molecular docking and thermal stability screening to construct an ER mutant library. And we successfully obtained a double mutant ERK26N/V295M (ER*) whose catalytic activity was 1.48 times that of wild-type ER. Through structural analysis and MD analysis, we found that the catalytic pocket and the enzyme stability of ER* were both improved. We overexpressed ER* in the engineered strain ΔKU70 to obtain the strain YLE-1. YLE-1 can produce 39.47 g/L of erythritol within 144 h, representing a 35% increase compared to the unmodified strain, and a 10% increase compared to the strain overexpressing wild-type ER. Considering the essentiality of NADPH supply, we further co-expressed ER* with two genes from the oxidative phase of PPP, ZWF1 and GND1. This resulted in the construction of YLE-3, which exhibited a significant increase in production, producing 47.85 g/L of erythritol within 144 h, representing a 63.90% increase compared to the original chassis strain. The productivity and the yield of the engineered strain YLE-3 were 0.33 g/L/h and 0.48 g/g glycerol, respectively. This work provided an ER mutation with excellent performance, and also proved the importance of cofactors in the process of erythritol synthesis, which will promote the industrial production of erythritol by metabolic engineering of Y. lipolytica.

BACKGROUND: There is insufficient clinical and microbiological evidence to support the use of diode laser and air-polishing with erythritol as supplements to scaling and root planning(SRP). The aim of the current study is to evaluate the clinical and microbiologic efficacy of erythritol subgingival air polishing and diode laser in treatment of periodontitis.
METHODS: The study encompassed twenty-four individuals seeking periodontal therapy and diagnosed with stage I and stage II periodontitis. Eight patients simply underwent SRP. Eight more patients had SRP followed by erythritol subgingival air polishing, and eight patients had SRP followed by diode laser application. At baseline and six weeks, clinical periodontal parameters were measured, including Plaque Index (PI), Gingival Index (GI), periodontal Probing Depth (PPD), and Clinical Attachment Level (CAL). The bacterial count of Aggregatibacter actinomycetemcomitans(A.A), Porphyromonas gingivalis (P.G) was evaluated at different points of time.
RESULTS: The microbiological assessment revealed significant differences in the count of A.A. between the laser and erythritol groups immediately after treatment, indicating a potential impact on microbial levels. However, the microbial levels showed fluctuations over the subsequent weeks, without statistically significant differences. Plaque indices significantly decreased post-treatment in all groups, with no significant inter-group differences. Gingival indices decreased, and the laser group showed lower values than erythritol and control groups. PPD and CAL decreased significantly across all groups, with the laser group exhibiting the lowest values.
CONCLUSIONS: The supplementary use of diode laser and erythritol air polishing, alongside SRP, represents an expedited periodontal treatment modality. This approach leads to a reduction in bacteria and improvement in periodontal health.
BACKGROUND: This clinical trial was registered on Clinical Trials.gov (Registration ID: NCT06209554) and released on 08/01/2024.

BACKGROUND: Erythritol, a natural polyol, is a low-calorie sweetener synthesized by a number of microorganisms, such as Moniliella pollinis. Yet, a widespread use of erythritol is limited by high production costs due to the need for cultivation on glucose-rich substrates. This study explores the potential of using Trichoderma reesei as an alternative host for erythritol production, as this saprotrophic fungus can be cultivated on lignocellulosic biomass residues. The objective of this study was to evaluate whether such an alternative host would lead to a more sustainable and economically viable production of erythritol by identifying suitable carbon sources for erythritol biosynthesis, the main parameters influencing erythritol biosynthesis and evaluating the feasibility of scaling up the defined process.
RESULTS: Our investigation revealed that T. reesei can synthesize erythritol from glucose but not from other carbon sources like xylose and lactose. T. reesei is able to consume erythritol, but it does not in the presence of glucose. Among nitrogen sources, urea and yeast extract were more effective than ammonium and nitrate. A significant impact on erythritol synthesis was observed with variations in pH and temperature. Despite successful shake flask experiments, the transition to bioreactors faced challenges, indicating a need for further scale-up optimization.
CONCLUSIONS: While T. reesei shows potential for erythritol production, reaching a maximum concentration of 1 g/L over an extended period, its productivity could be improved by optimizing the parameters that affect erythritol production. In any case, this research contributes valuable insights into the polyol metabolism of T. reesei, offering potential implications for future research on glycerol or mannitol production. Moreover, it suggests a potential metabolic association between erythritol production and glycolysis over the pentose phosphate pathway.

Chloroplasts are not only critical photosynthesis sites in plants, but they also participate in plastidial retrograde signaling in response to developmental and environmental signals. MEcPP (2-C-Methyl-D-erythritol-2,4-cyclopyrophosphate) is an intermediary in the methylerythritol phosphate (MEP) pathway in chloroplasts. It is a critical precursor for the synthesis of isoprenoids and terpenoid derivatives, which play crucial roles in plant growth and development, photosynthesis, reproduction, and defense against environmental constraints. Accumulation of MEcPP under stressful conditions triggers the expression of IMPα-9 and TPR2, contributing to the activation of abiotic stress-responsive genes. In this correspondence, we discuss plastidial retrograde signaling in support of a recently published paper in Molecular Plant (Zeng et al. 2024). We hope that it can shed more insight on the retrograde signaling cascade.

The methylerythritol phosphate (MEP) pathway is responsible for biosynthesis of the precursors of isoprenoid compounds in eubacteria and plastids. It is a metabolic alternative to the well-known mevalonate pathway for isoprenoid production found in archaea and eukaryotes. Recently, a role for the MEP pathway in oxidative stress detection, signalling, and response has been identified. This role is executed in part through the unusual cyclic intermediate, methylerythritol cyclodiphosphate (MEcDP). We postulate that this response is triggered through the oxygen sensitivity of the MEP pathway\'s terminal iron-sulfur (Fe-S) cluster enzymes. MEcDP is the substrate of IspG, the first Fe-S cluster enzyme in the pathway; it accumulates under oxidative stress conditions and acts as a signalling molecule. It may also act as an antioxidant. Furthermore, evidence is emerging for a broader and highly nuanced role of the MEP pathway in oxidative stress responses, implemented through a complex system of differential regulation and sensitivity at numerous nodes in the pathway. Here, we explore the evidence for such a role (including the contribution of the Fe-S cluster enzymes and different pathway metabolites, especially MEcDP), the evolutionary implications, and the many questions remaining about the behaviour of the MEP pathway in the presence of oxidative stress.

Fruit pomace, as a by-product of fruit and vegetable processing, is a cheap and easily accessible material for further processing that can replace selected recipe ingredients, most often flour. In addition, their advantage is their high health-promoting potential. The aim of this study was to evaluate the effect of the simultaneous use of erythritol (100% sucrose substitution) and the addition of varying amounts of blackcurrant, chokeberry and apple pomace (0%, 10%, 30% and 50% by weight of flour) on the glycaemic response after consumption of shortbread cookies in an in vivo study with humans (ISO 26642:2010). It was shown that an increase in the addition of each type of pomace reduced the glycaemic index value of the cookies. The pomace and sucrose-sweetened cookies were classified in the medium and low GI group. For each type of pomace, an increase in its share in the recipe of cookies was associated with a reduction in GI values (pomace: apple 49.1-37.2%, blackcurrant 56.4-41.0%, chokeberry 59.4-35.5%). Similar correlations were shown for the use of erythritol (pomace: apple 39.5-29.1%, blackcurrant 43.9-31.9%, chokeberry 34.6-20.7%). A significant effect of pomace addition on the GI values of shortbread cookies, was only observed for sucrose-sweetened products. The results obtained allow the conclusion that there is potential for the use of waste raw materials in the production of functional foods.

BACKGROUND: Development of insecticide resistance in the major malaria vectors has necessitated the development of novel vector control tools. One such strategy involves the use of toxic sugar baits that targets the sugar-feeding behaviour of mosquito vectors. In this study, we investigated the potential of polyols, as a toxic food (sugar) source in toxic sugar baits against the malaria vector Anopheles stephensi Liston. We examined the acute toxicity of six polyols, namely, erythritol, glycerol, mannitol, propylene glycol (PG), sorbitol, and xylitol on adult female An. stephensi mosquitoes at two different concentrations - 2% and 10%. We also studied changes in fecundity, egg hatchability and mid-gut peroxide levels induced by polyol exposure.
RESULTS: Among the six polyol compounds tested, PG was most toxic and lethal followed by glycerol and erythritol (P < 0.001) compared to the control (sucrose). PG induced acute mortality at different tested concentrations. In the erythritol- and glycerol-fed groups, a dose-dependent effect on mortality was observed. Glycerol evidently reduced fecundity and egg-hatchability in gonotrophic cycles G1 and G2. Sucrose was the preferred food source (48%), followed by erythritol (18%), PG (10%) and glycerol (8%). Ingestion of polyols increased peroxide levels in mosquito guts, which persisted for extended durations ultimately resulting in rapid mortality (P < 0.05).
CONCLUSIONS: The present study highlights the usefulness of sugar polyols for the development of toxic sugar baits with minimal yet effective ingredients. Further research could be focused on field experiments and on the exploration of synergistic effects of different polyols for optimization of field applications. © 2024 Society of Chemical Industry.

Erythritol, as a new type of natural sweetener, has been widely used in food, medical, cosmetics, pharmaceutical and other fields due to its unique physical and chemical properties and physiological functions. In recent years, with the continuous development of strategies such as synthetic biology, metabolic engineering, omics-based systems biology and high-throughput screening technology, people\'s understanding of the erythritol biosynthesis pathway has gradually deepened, and microbial cell factories with independent modification capabilities have been successfully constructed. In this review, the cheap feedstocks for erythritol synthesis are introduced in detail, the environmental factors affecting the synthesis of erythritol and its regulatory mechanism are described, and the tools and strategies of metabolic engineering involved in erythritol synthesis are summarized. In addition, the study of erythritol derivatives is helpful in expanding its application field. Finally, the challenges that hinder the effective production of erythritol are discussed, which lay a foundation for the green, efficient and sustainable production of erythritol in the future and breaking through the bottleneck of production.

Isoprenoid metabolism and its derivatives took part in photosynthesis, growth regulation, signal transduction, and plant defense to biotic and abiotic stresses. However, how aluminum (Al) stress affects the isoprenoid metabolism and whether isoprenoid metabolism plays a vital role in the Citrus plants in coping with Al stress remain unclear. In this study, we reported that Al-treatment-induced alternation in the volatilization rate of monoterpenes (α-pinene, β-pinene, limonene, α-terpinene, γ-terpinene and 3-carene) and isoprene were different between Citrus sinensis (Al-tolerant) and C. grandis (Al-sensitive) leaves. The Al-induced decrease of CO2 assimilation, maximum quantum yield of primary PSII photochemistry (Fv/Fm), the lower contents of glucose and starch, and the lowered activities of enzymes involved in the mevalonic acid (MVA) pathway and 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway might account for the different volatilization rate of isoprenoids. Furthermore, the altered transcript levels of genes related to isoprenoid precursors and/or derivatives metabolism, such as geranyl diphosphate (GPP) synthase (GPPS) in GPP biosynthesis, geranylgeranyl diphosphate synthase (GGPPS), chlorophyll synthase (CHS) and GGPP reductase (GGPPR) in chlorophyll biosynthesis, limonene synthase (LS) and α-pinene synthase (APS) in limonene and α-pinene synthesis, respectively, might be responsible for the different contents of corresponding products in C. grandis and C. sinensis. Our data suggested that isoprenoid metabolism was involved in Al tolerance response in Citrus, and the alternation of some branches of isoprenoid metabolism could confer different Al-tolerance to Citrus species.

OBJECTIVE: Professional oral hygiene is essential to prevent peri-implant disease. Appropriate instruments should be employed for implant-supported restorations: they should effectively remove deposits without damaging dental implant surface. The aim of the present systematic review is to investigate the efficacy and safety of erythritol air-polishing in implant-supported rehabilitations, compared to alternative hygienic techniques.
METHODS: The guidelines reported in the indications of the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) were employed for this systematic review. The focused question was: \'what is the effect of erythritol air-polishing on dental implant surfaces regarding its cleansing efficacy and/or safety?\' The final online search was conducted on 13 August 2023; MEDLINE-PubMed, Scopus and Cochrane Library were employed. Comparative in vitro or in vivo original studies were included.
RESULTS: The initial database search yielded 128 entries; the final selection comprised 15 articles. The risk of bias was evaluated using the Newcastle Ottawa scale (NOS), the Cochrane Handbook for Systematic Reviews of Interventions, GRADE method. Ultrasonic scaling with PEEK tips, glycine air-polishing and cold atmospheric plasma were the devices most frequently compared to erythritol powder in the included studies. Erythritol air-polishing appeared to be significantly more effective in reducing biofilm compared to other treatments, without causing any significant damage to the implant surface and peri-implant tissues, promoting a good biological response.
CONCLUSIONS: Erythritol air-polishing showed promising results for professional oral hygiene in implant-supported restorations. According to this systematic review, it is effective and safe for removing biofilm from titanium dental implants.