Dismemberment and subsequent burning are common methods employed in an attempt to conceal or destroy evidence. While kerf characteristics can be utilised to identify tool(s) used for dismemberment, further research is necessary to assess the effect of burning on these characteristics. In this study, a back (tenon) saw (13 teeth per inch) was used to manually inflict trauma on Ovis aries de-fleshed femur bones (n = 18). Three different cut marks (shallow false start, incomplete cut and complete transection) were made on the mid-shaft of each bone. Subsequently, the bones were burned for 20 minutes in a muffle furnace. Three burn temperatures were assessed: 400 °C, 600 °C and 800 °C. Saw mark characteristics of each cut type were assessed and compared pre- and post-burning. All pre-existing trauma was recognisable post-burning; however, metric and morphological alterations were apparent. An increase in kerf width was observed at 600 °C in false start lesions and 800 °C in incomplete cuts. Breakaway spur thickness decreased post-burning (at 400 °C and 800 °C) but length was not significantly affected. Mean inter-striation distance decreased post burning at all temperature groups. Saw marks were distinguishable from heat-related fractures across all temperature groups. One false start lesion was obliterated at 800 °C. Exit chipping, pull-out striae as well as striation regularity appeared to be more enhanced after heat exposure. These alterations indicate a temperature-dependent impact on these characteristics. Further research is necessary to assess the role of burn duration.

Homicide perpetrators can use concrete as a means to conceal their victims. When concrete encasement is encountered in the forensic field, albeit rarely, it is often coupled with postmortem dismemberment. This method of obscuring the evidence presents unique investigative obstacles, specifically related to identification. Various approaches to obtaining fingerprints from decedents encased in concrete have been suggested and implemented over the years. The presented case is that of an initially unidentified 44-year-old male, who was subject to postmortem dismemberment and concrete encasement. Meticulous excavation techniques facilitated preservation of evidence and an anatomical reconstruction of the body. These techniques enabled inspection of the incision sites of the dismembered remains during the postmortem examination. Identifiable jewelry and tattoos were noted at autopsy. Further, the resulting concrete molds could be utilized to obtain fingerprints. These prints were used to ultimately identify the decedent.

UNASSIGNED: Each year, there are billions of agricultural work accidents involving the operation of tractors, grain augers, harvest combines, power take-off devices, or balers and thrashers. Field accidents of this nature seem more common on afternoons, just as road accidents tend to skew toward nighttime. The lesions can vary widely and depends strictly on the operation of the machinery analyzed.
UNASSIGNED: This paper aims to present a peculiar case of decapitation by a combine harvester, showing how, in cases of injury due to agricultural machinery, it is fundamental a correct execution of a scene investigation, autoptic examination, and cooperation with a specialist in engineering.
UNASSIGNED: A 54-year-old man was found decapitated on the header of a combine harvester; his extremities were also dismembered. At autopsy, a clean oblique cut across the first cervical vertebra had severed the head at the neck. Although the right arm remained intact, both lower extremities were mutilated, showing numerous exposed and open fractures. A bleeding, penetrating wound to the back was additionally noted. In the days that followed, missing parts (head and left leg) were discovered in other machine components (grain tank and straw walker, respectively). All observed injuries were compatible with the mechanics of the cochlea, its rotating movement inflicting the damages above. Collaboration between pathologists and engineers was fundamental to recreating the dynamics of this rare decapitation accident by a combine harvester.

This study aims to identify an antemortem neck stab wound on a highly decomposed, headless and mutilated body by conventional hematoxylin-eosin (HE) staining combined with Ponceau-Victoria blue B staining (P-VB staining) and Masson staining. Specifically, a tissue sample was excised from the skin and muscle tissue at the junction of the normal and brownish discolored areas around the suspected stabbing tract of the left neck, in the upper and lower wound-clavicle-shoulder region. Conventional HE staining only provides a morphological and structural outline of the tissue, with both the injury hemorrhage and local connective tissue appearing eosinophilic pink. However, P-VB staining shows obvious contrast between the injury hemorrhage and connective tissue, with the former appearing yellow-green and the latter appearing orange-red. Similarly, Masson staining of the injury hemorrhage and connective tissue contrast clearly with purple-red and dark blue, respectively. Therefore, our study highlights that conventional HE staining with the combination of P-VB staining and Masson staining allowed for a clearer and corroborated identification of antemortem injury and hemorrhage from the stab wound in highly decomposed mutilated corpses.

Several decomposed body parts were received for examination by the Forensic Anthropology section of the Medico-legal Institute of João Pessoa, Paraíba, Brazil. The portions of the lower and upper limbs, ribs, vertebrae, and a skull were thoroughly examined. The biological profile indicated a male individual with an estimated age range between 23 and 57 years and a mean age of 35.2 years (SD = 9.4; phase IV, Suchey-Brooks). The skeleton showed injuries caused by sharp force and sharp-blunt force trauma that affected all body segments. Macroscopically, the lesions are mainly in the diaphyseal segments of the long bones, sacrum, pelvis, mandible, maxilla, scapulae, sternum, vertebrae, the distal epiphysis of the left fibula, and the distal epiphysis of the left tibia displayed characteristics compatible with injuries produced perimortem. It was not possible to determine the cause of death. DNA analysis resulted in a positive identification. Because of common difficulties faced in forensic practice, it is often not possible for forensic anthropologists to go to the crime scene, X-ray or body scanners are frequently unavailable, and the victim\'s medical and/or dental records are sometimes absent. These difficulties make identification ultimately depend on genetic analysis, which is more time-consuming than other identification methods. Despite this, bone fragment examination in dismemberment cases is a complex task. Forensic Anthropology can shed light on cases involving the identification of dismembered remains, which are challenging because of the number of traumatic injuries, as well as different injury patterns, on bones.

We report on a case of criminal dismemberment and attempted scalping of a homicide victim with a \"Mohawk\" haircut. Case findings are presented. A review of the literature was performed for scalping in its historical and cultural context and particularly in criminal dismemberment and mutilation: Historically, scalping was prevalent in many ancient cultures around the world, where scalps were taken as trophies or \"proof of kill\", much like shrunken heads, trophy skulls, and other artefacts. Scalping was particularly widespread in Northern America in the context of tribal warfare, both before and after colonization. The iconic \"Mohawk\" haircut is closely linked with scalping, as it was meant to taunt the enemy. In the modern forensic context, scalping constitutes a form of criminal mutilation. However, cases of criminal dismemberment and mutilation are rare in forensic casework. Our literature review revealed a low number of scalping in criminal dismemberment and mutilation cases. The documentation was overall poor. Positioning scalping within the classification of criminal mutilation and dismemberment was difficult. In literature, even though case numbers were small, the majority of \"textbook scalping\" cases were German. The presented case, to our best knowledge, is the first modern-day photo-documented case of (attempted) scalping, even more so of a person wearing a \"Mohawk\".

Homicide, particularly where a body has been concealed, is uniquely challenging for investigators to estimate the time of occurrence due to the methods employed by perpetrators to hide the body or its constituent parts from detection. The regularity of necrophagous insect lifecycles to determine minimum post-mortem interval (minPMI) is widely employed but remains an unreliable technique if used without a clear understanding of the factors that affect insect access and oviposition behaviour to concealed remains. The purpose of this study was to investigate the effect of wrapping body parts on fly colonisation and implications for minPMI calculations. Field studies were carried out using four treatments of pork (as surrogate body parts), in five replicates, one unwrapped, the other three wrapped in either a black plastic sack, a small-zipped wash bag (to simulate a suitcase), or a plastic sack further placed in a wash bag. Over a 48-h period all the methods of wrapping significantly disrupted the host-finding process of blowflies to dismembered carcasses, with a delay of initial contact and oviposition of 30+h (dependant on wrapping) and even more in wet conditions (48+ h). Egg numbers were also reduced by as much as 99.1% on wrapped samples compared to unwrapped. These new findings highlight the importance of applying adjustments to minPMI calculations when encountering wrapped remains. Advances in the accuracy of minPMI calculations will prevent the waste of valuable police time and resources and better focus the search for witnesses and suspects in homicide investigations.

Minimum kerf width (MKW) is often assessed in medicolegal cases of skeletal sharp force trauma and can provide information about the tool used. Previously published saw MKW research focuses on the relationship between MKW and saw blade set width (width of the saw blade including tooth set). Despite these publications using various measurement tools and methods to collect MKW, error in MKW measurements is not well-documented. The goal of this research was to investigate MKW measurement precision in terms of intraobserver error, interobserver error, and the effects of measurement modality (e.g., calipers versus stereo microscope). The study sample consisted of 351 incomplete cuts made with 27 diverse saws. MKW was collected using three methods: (1) inserting the internal caliper jaws into the incomplete kerf, (2) placing the external caliper jaws on the cortical surface, and (3) using a digital stereo microscope and associated measurement software. For each method, intraobserver error and interobserver error were assessed. Differences in measurements taken with the three measurement modalities were assessed for each observer as well. Relative technical error of measurement (rTEM) and coefficients of reliability indicate that internal caliper and stereo microscope measurements had the lowest intra- and interobserver error (rTEM = 3.72% to 6.15%; r = 0.98-0.996). External caliper measurements performed the worst (rTEM: intra = 8.53% and inter = 21.32%). There was higher precision between internal caliper and stereo microscope measurements than with the external caliper measurements. This research highlights the need for measurement standardization.

Saws are common tools used in postmortem dismemberment to alter human remains. Dismemberment may coincide with other concealment methods such as disposal in aquatic environments, so forensic anthropologists must recognize how taphonomy affects saw mark preservation. This study focuses on exposure of saw cut bone to a fluvial environment. Cross sections from pig humeri cut by a 7 TPI saw were evaluated on all cut surfaces for tooth hop (TH), exit chipping, and breakaway spurs. Pre-fluvial exposure, features were measured by two observers using a stereomicroscope while a one-dimensional profilometer was used to define surface roughness. Bones were randomly assigned to control or experimental groups and within each divided by duration of exposure (24, 48, 72, and 96 h). Control groups (four cross sections) were exposed to water in a 3-meter-long hydraulic channel; experimental groups (20 cross sections) were exposed to water and sediment in a 12-meter-long sediment-recirculating hydraulic channel. Velocity was maintained at 0.45 m/s. All measurements were repeated post-exposure. Observer A recorded 268 TH (mean: 3.70 ± 0.34 mm); post-exposure, count increased by 16.79% (mean: 3.71 ± 0.29 mm). Observer B recorded 247 TH (mean: 3.46 ± 0.42 mm); post-exposure, count decreased by 29.15% (mean: 3.36 ± 0.33 mm). All TPI estimates calculated include the 7 TPI saw. Exit chipping lost flakiness (in both channels), but was still visible. Breakaway spurs were not visibly altered. Surface staining was limited to bones exposed to sediment. Roughness was significantly lower in experimental groups post-fluvial exposure (W = 5705, p < 0.05). Overall, this fluvial environment did not obliterate saw mark evidence from bone.

In cases of criminal dismemberment, the analysis of saw marks helps to determine the class of the saw used. The present study compared the microscopic features of experimental false starts performed on three freshly defleshed human femurs. 150 lesions were produced using three reciprocating blades and two hand saws of similar class. Two groups of tools were created according to the class of the blades: group 1 (teeth per inch = 6, alternating set) and group 2 (teeth per inch = 24, wavy set). The minimum width of the kerf was always thicker with reciprocating blades than that of the handsaw of the same class. This fact is linked to the thickness of the blades and not necessarily to the fast forth and back motion of the blades. Shape kerf profiles and shape of the walls were very confusing, with a lot of variation of the false starts caused by the reciprocating blades and the risk of misclassification (rip teeth versus crosscut teeth, alternating set versus wavy set). Striae on the kerf floor and bone islands were more consistent. The main conclusions are, first, that usual features of false starts achieved by reciprocating saw blades used in this work vary a great deal and may lead to misclassification of the saw class, and second, that no criterion has been found to differentiate reciprocating blades and handsaws. These results demonstrate that we have to be very prudent while estimating the possible saw from a false start in a real forensic case.