Homicide perpetrators can use concrete as a means to conceal their victims. When concrete encasement is encountered in the forensic field, albeit rarely, it is often coupled with postmortem dismemberment. This method of obscuring the evidence presents unique investigative obstacles, specifically related to identification. Various approaches to obtaining fingerprints from decedents encased in concrete have been suggested and implemented over the years. The presented case is that of an initially unidentified 44-year-old male, who was subject to postmortem dismemberment and concrete encasement. Meticulous excavation techniques facilitated preservation of evidence and an anatomical reconstruction of the body. These techniques enabled inspection of the incision sites of the dismembered remains during the postmortem examination. Identifiable jewelry and tattoos were noted at autopsy. Further, the resulting concrete molds could be utilized to obtain fingerprints. These prints were used to ultimately identify the decedent.

UNASSIGNED: Each year, there are billions of agricultural work accidents involving the operation of tractors, grain augers, harvest combines, power take-off devices, or balers and thrashers. Field accidents of this nature seem more common on afternoons, just as road accidents tend to skew toward nighttime. The lesions can vary widely and depends strictly on the operation of the machinery analyzed.
UNASSIGNED: This paper aims to present a peculiar case of decapitation by a combine harvester, showing how, in cases of injury due to agricultural machinery, it is fundamental a correct execution of a scene investigation, autoptic examination, and cooperation with a specialist in engineering.
UNASSIGNED: A 54-year-old man was found decapitated on the header of a combine harvester; his extremities were also dismembered. At autopsy, a clean oblique cut across the first cervical vertebra had severed the head at the neck. Although the right arm remained intact, both lower extremities were mutilated, showing numerous exposed and open fractures. A bleeding, penetrating wound to the back was additionally noted. In the days that followed, missing parts (head and left leg) were discovered in other machine components (grain tank and straw walker, respectively). All observed injuries were compatible with the mechanics of the cochlea, its rotating movement inflicting the damages above. Collaboration between pathologists and engineers was fundamental to recreating the dynamics of this rare decapitation accident by a combine harvester.

This study aims to identify an antemortem neck stab wound on a highly decomposed, headless and mutilated body by conventional hematoxylin-eosin (HE) staining combined with Ponceau-Victoria blue B staining (P-VB staining) and Masson staining. Specifically, a tissue sample was excised from the skin and muscle tissue at the junction of the normal and brownish discolored areas around the suspected stabbing tract of the left neck, in the upper and lower wound-clavicle-shoulder region. Conventional HE staining only provides a morphological and structural outline of the tissue, with both the injury hemorrhage and local connective tissue appearing eosinophilic pink. However, P-VB staining shows obvious contrast between the injury hemorrhage and connective tissue, with the former appearing yellow-green and the latter appearing orange-red. Similarly, Masson staining of the injury hemorrhage and connective tissue contrast clearly with purple-red and dark blue, respectively. Therefore, our study highlights that conventional HE staining with the combination of P-VB staining and Masson staining allowed for a clearer and corroborated identification of antemortem injury and hemorrhage from the stab wound in highly decomposed mutilated corpses.

Several decomposed body parts were received for examination by the Forensic Anthropology section of the Medico-legal Institute of João Pessoa, Paraíba, Brazil. The portions of the lower and upper limbs, ribs, vertebrae, and a skull were thoroughly examined. The biological profile indicated a male individual with an estimated age range between 23 and 57 years and a mean age of 35.2 years (SD = 9.4; phase IV, Suchey-Brooks). The skeleton showed injuries caused by sharp force and sharp-blunt force trauma that affected all body segments. Macroscopically, the lesions are mainly in the diaphyseal segments of the long bones, sacrum, pelvis, mandible, maxilla, scapulae, sternum, vertebrae, the distal epiphysis of the left fibula, and the distal epiphysis of the left tibia displayed characteristics compatible with injuries produced perimortem. It was not possible to determine the cause of death. DNA analysis resulted in a positive identification. Because of common difficulties faced in forensic practice, it is often not possible for forensic anthropologists to go to the crime scene, X-ray or body scanners are frequently unavailable, and the victim\'s medical and/or dental records are sometimes absent. These difficulties make identification ultimately depend on genetic analysis, which is more time-consuming than other identification methods. Despite this, bone fragment examination in dismemberment cases is a complex task. Forensic Anthropology can shed light on cases involving the identification of dismembered remains, which are challenging because of the number of traumatic injuries, as well as different injury patterns, on bones.

We report on a case of criminal dismemberment and attempted scalping of a homicide victim with a \"Mohawk\" haircut. Case findings are presented. A review of the literature was performed for scalping in its historical and cultural context and particularly in criminal dismemberment and mutilation: Historically, scalping was prevalent in many ancient cultures around the world, where scalps were taken as trophies or \"proof of kill\", much like shrunken heads, trophy skulls, and other artefacts. Scalping was particularly widespread in Northern America in the context of tribal warfare, both before and after colonization. The iconic \"Mohawk\" haircut is closely linked with scalping, as it was meant to taunt the enemy. In the modern forensic context, scalping constitutes a form of criminal mutilation. However, cases of criminal dismemberment and mutilation are rare in forensic casework. Our literature review revealed a low number of scalping in criminal dismemberment and mutilation cases. The documentation was overall poor. Positioning scalping within the classification of criminal mutilation and dismemberment was difficult. In literature, even though case numbers were small, the majority of \"textbook scalping\" cases were German. The presented case, to our best knowledge, is the first modern-day photo-documented case of (attempted) scalping, even more so of a person wearing a \"Mohawk\".

Homicide, particularly where a body has been concealed, is uniquely challenging for investigators to estimate the time of occurrence due to the methods employed by perpetrators to hide the body or its constituent parts from detection. The regularity of necrophagous insect lifecycles to determine minimum post-mortem interval (minPMI) is widely employed but remains an unreliable technique if used without a clear understanding of the factors that affect insect access and oviposition behaviour to concealed remains. The purpose of this study was to investigate the effect of wrapping body parts on fly colonisation and implications for minPMI calculations. Field studies were carried out using four treatments of pork (as surrogate body parts), in five replicates, one unwrapped, the other three wrapped in either a black plastic sack, a small-zipped wash bag (to simulate a suitcase), or a plastic sack further placed in a wash bag. Over a 48-h period all the methods of wrapping significantly disrupted the host-finding process of blowflies to dismembered carcasses, with a delay of initial contact and oviposition of 30+h (dependant on wrapping) and even more in wet conditions (48+ h). Egg numbers were also reduced by as much as 99.1% on wrapped samples compared to unwrapped. These new findings highlight the importance of applying adjustments to minPMI calculations when encountering wrapped remains. Advances in the accuracy of minPMI calculations will prevent the waste of valuable police time and resources and better focus the search for witnesses and suspects in homicide investigations.

3D printing has rapidly developed and been applied in forensic science due to its use in creating demonstrations for courts of law. Much of the literature on this specific topic has focused on the use of 3D printed models in academia, the potential influence on a jury, and its use as a long-term documentation process, but with few actual forensic case examples. This paper offers an insight into the development of 3D printing in forensic practice and how 3D printing is currently being used in the criminal justice system in England and Wales.A series of case reports were gathered from multiple police forces and forensic practitioners in the UK to identify how 3D printing was being used. These discussions established who was requesting 3D printed exhibits, what type of technologies were being utilised, what type of exhibits were being printed, and resulting feedback for the use of 3D printed material within a criminal case. As a result, this research demonstrates the current use of 3D printing in England and Wales, discussing the associated cases that have been known to incorporate 3D prints. Likewise, this work explores the limitations that have been encountered by forensic practitioners and identifies a series of research questions that should be considered in future investigations.

Dismemberment is characterized by the fragmentation of the body into anatomical sections. It can occur because of a murder, suicide, or accident. In the literature, there are no cases of patricide perpetrated by a daughter in which the offender performed the dismemberment. However, in this paper, we reported a case of patricide by a schizophrenic daughter that was not treated with antipsychotic therapy. Post-mortem Computed Tomography (PMCT), autopsy, and histological examinations were performed. The soft tissues were removed through maceration techniques and chemical treatment. An analysis was performed to study the bone margins and clarify the weapon and manner of death. This investigation, which used radiological and histological studies, helped to assess the vitality of the injuries. The purpose of the study is to discover the weapon used, the cause, and the manner of death, with particular interest in this case due to the dismemberment. Moreover, we emphasize the correlation between patricide, dismemberment, and a lack of antipsychotic treatment in patients with schizophrenia.

The mutilation and encasement of corpses are rare in daily forensic work, but when they occur, close cooperation between different disciplines, such as legal medicine and forensic anthropology, is necessary to obtain the most valuable results. One forensic examination method is the radiological evaluation of victims or body parts by postmortem CT (pmCT) and X-ray images. In relation to a case described in this paper, an empirical study was conducted to figure out the value of radiological imaging and the ability to visualize and temporally classify changes in a corpse encased in concrete. For this purpose, the head and paw of a pig were encased in concrete and scanned regularly over a period of one year. Body parts such as the head and paw are clearly visible on X-ray images. Although decay-related changes are shown, a specific minimum time interval cannot yet be found, as these changes occur continuously in lesser amounts.

This case study reports the advantages of micro-CT to aid the investigative process in a complex dismemberment case. Micro-CT was successfully implemented to scan all skeletal remains of a dismembered female. The digital models were utilized to (i) screen for any further injuries not related to the dismemberment, (ii) provide measurements from false starts non-destructively, and (iii) visually represent the evidence in a structured format in court to improve the understanding of the forensic evidence by the jury. Acquiring high-resolution scans in this manner improved the efficiency of the forensic investigation by screening the remains and provided complementary toolmark evidence to the investigating team and forensic pathologist. A total of 14 false starts were identified along with the directionality of each dismemberment cut. Furthermore, the visual 3D representation of the remains in court provided a powerful tool to communicate this important evidence to the jury and form a prosecution narrative. As a forensic radiological method, micro-CT provided valuable information both in the investigation and the court presentation.