Several decomposed body parts were received for examination by the Forensic Anthropology section of the Medico-legal Institute of João Pessoa, Paraíba, Brazil. The portions of the lower and upper limbs, ribs, vertebrae, and a skull were thoroughly examined. The biological profile indicated a male individual with an estimated age range between 23 and 57 years and a mean age of 35.2 years (SD = 9.4; phase IV, Suchey-Brooks). The skeleton showed injuries caused by sharp force and sharp-blunt force trauma that affected all body segments. Macroscopically, the lesions are mainly in the diaphyseal segments of the long bones, sacrum, pelvis, mandible, maxilla, scapulae, sternum, vertebrae, the distal epiphysis of the left fibula, and the distal epiphysis of the left tibia displayed characteristics compatible with injuries produced perimortem. It was not possible to determine the cause of death. DNA analysis resulted in a positive identification. Because of common difficulties faced in forensic practice, it is often not possible for forensic anthropologists to go to the crime scene, X-ray or body scanners are frequently unavailable, and the victim\'s medical and/or dental records are sometimes absent. These difficulties make identification ultimately depend on genetic analysis, which is more time-consuming than other identification methods. Despite this, bone fragment examination in dismemberment cases is a complex task. Forensic Anthropology can shed light on cases involving the identification of dismembered remains, which are challenging because of the number of traumatic injuries, as well as different injury patterns, on bones.

We report on a case of criminal dismemberment and attempted scalping of a homicide victim with a \"Mohawk\" haircut. Case findings are presented. A review of the literature was performed for scalping in its historical and cultural context and particularly in criminal dismemberment and mutilation: Historically, scalping was prevalent in many ancient cultures around the world, where scalps were taken as trophies or \"proof of kill\", much like shrunken heads, trophy skulls, and other artefacts. Scalping was particularly widespread in Northern America in the context of tribal warfare, both before and after colonization. The iconic \"Mohawk\" haircut is closely linked with scalping, as it was meant to taunt the enemy. In the modern forensic context, scalping constitutes a form of criminal mutilation. However, cases of criminal dismemberment and mutilation are rare in forensic casework. Our literature review revealed a low number of scalping in criminal dismemberment and mutilation cases. The documentation was overall poor. Positioning scalping within the classification of criminal mutilation and dismemberment was difficult. In literature, even though case numbers were small, the majority of \"textbook scalping\" cases were German. The presented case, to our best knowledge, is the first modern-day photo-documented case of (attempted) scalping, even more so of a person wearing a \"Mohawk\".

3D printing has rapidly developed and been applied in forensic science due to its use in creating demonstrations for courts of law. Much of the literature on this specific topic has focused on the use of 3D printed models in academia, the potential influence on a jury, and its use as a long-term documentation process, but with few actual forensic case examples. This paper offers an insight into the development of 3D printing in forensic practice and how 3D printing is currently being used in the criminal justice system in England and Wales.A series of case reports were gathered from multiple police forces and forensic practitioners in the UK to identify how 3D printing was being used. These discussions established who was requesting 3D printed exhibits, what type of technologies were being utilised, what type of exhibits were being printed, and resulting feedback for the use of 3D printed material within a criminal case. As a result, this research demonstrates the current use of 3D printing in England and Wales, discussing the associated cases that have been known to incorporate 3D prints. Likewise, this work explores the limitations that have been encountered by forensic practitioners and identifies a series of research questions that should be considered in future investigations.

Dismemberment is characterized by the fragmentation of the body into anatomical sections. It can occur because of a murder, suicide, or accident. In the literature, there are no cases of patricide perpetrated by a daughter in which the offender performed the dismemberment. However, in this paper, we reported a case of patricide by a schizophrenic daughter that was not treated with antipsychotic therapy. Post-mortem Computed Tomography (PMCT), autopsy, and histological examinations were performed. The soft tissues were removed through maceration techniques and chemical treatment. An analysis was performed to study the bone margins and clarify the weapon and manner of death. This investigation, which used radiological and histological studies, helped to assess the vitality of the injuries. The purpose of the study is to discover the weapon used, the cause, and the manner of death, with particular interest in this case due to the dismemberment. Moreover, we emphasize the correlation between patricide, dismemberment, and a lack of antipsychotic treatment in patients with schizophrenia.

We identified 43 cases of mutilation homicides in a nationwide population-based study in Sweden during the period of 1991-2017. 70% of cases were classified as defensive mutilations where the main motive was disposal of the body, while 30% were classified as offensive, that is, due to an expression of strong aggression, necro-/sexual sadism, or psychiatric illness. In comparison with a previous study covering mutilation homicides in Sweden between 1961 and 1990, we noted an increase in incidence. The percentage of cases involving mutilation had increased from 0.5% of all homicides in the 1960s to 2.4% in the 2010s. The most common cause of death was sharp force, but in 28% of the cases, the cause of death could not be determined. The clearance rate in cases of mutilation homicide was 67%, and in a large majority of the cases, the offender was known to the victim. With regards to gender women made up 44% of the victims, whilst men constituted 56% of the victims and a total of 95% of the offenders. Half of the offenders had a personality disorder, however, only 13% were sentenced to forensic psychiatric care.

Criminal dismemberment is most commonly committed with a variety of hand-powered saws. These saws leave characteristic marks upon the bone that can assist in the identification of the weapon utilized. The current study provides frequencies of presentation of ten cut surface characteristics and examines intra- and interindividual variation between three hand-powered reciprocating saws. Pig radii were used as a proxy for human remains. 42 cut surfaces were created with three hand-powered reciprocating saws by the same researcher. Cut surface characteristics were assessed macroscopically, microscopically and with Scanning Electron Microscope (SEM), as well as photographed with Reflectance Transformation Imaging (RTI). Cut surface polish is the only characteristic that demonstrates consistently significant difference between saws. Five characteristics demonstrate some variation between blades: entrance shaving, breakaway spurs, breakaway notches, pull-out striae, and tooth hop. Four characteristics demonstrate no difference between blades: cut surface striation shape, cut surface striation regularity, harmonics, and exit chipping. Tooth hop is the most reliable characteristic for differentiating between blades in this study, while pull-out striae demonstrates high intra-individual variability and a low frequency of presentation making it unreliable for differentiating between saw blades. Cut surface striations, exit chipping, and breakaway spurs occurred with the highest frequencies and were reliable for determining direction of blade progress and blade stroke, but were not reliable for differentiating between saw blades. Harmonics were absent. Further research is necessary to create large databases of known saw mark examples with known intra- and interindividual variability rates and error rates.

During a homicide investigation in which fire has been used to reduce the size of the cadaver and conceal the evidence of injuries, the identification of perimortem trauma presents a challenge, in particular in cases when the perpetrator has dismembered the body followed by burning the remains. It is therefore important to understand the effects which heat causes on fresh bone. The aim of this paper is to perform a pilot study on the survival ratio of toolmarks in different anatomical regions associated with dismemberment, and a descriptive analysis of the variables that may potentially influence the post-burning survival and detection. To achieve this, three donated embalmed cadavers were used to simulate a case in which an attempted dismemberment and burning had occurred. Fifty-five pre-burning injuries were manually induced: 30 using a machete to inflict chopping trauma, and 25 with a serrated bread knife to inflict sharp force trauma, on the thigh, knee, ankle and wrist. The cadavers were cremated in a furnace at Madrid\'s Cementerio Sur and the burnt remains were analysed at the Laboratorio de Antropología y Odontología Forense of the Universidad Complutense de Madrid. Not all pre-burning injuries inflicted were visible after the cremation process; only 13% were detected in this experiment. Toolmarks can be masked, modified, destroyed or overlooked from the outset of the procedure due to several factors which influence the post-burning survival and detection of toolmarks and contribute to conceal the evidence of trauma. Additional research should be done to study further variables which affect the post-burning visibility of sharp force trauma.

Most studies of saw marks have focused on morphological characteristics and their utility in identifying saws suspected to have been utilized in cases of criminal dismemberment. The present study examined the extent to which metric analysis may be used to correlate saw blade measurements with minimum kerf widths (MKWs). A sample of 56 partially defleshed white-tailed deer (Odocoileus virginianus) long bones was utilized as proxy for human remains. The long bones were cut using a variety of commercially available saws, including 11 manual-powered and 5 mechanical-powered saws. A total of 496 false start kerfs (FSKs) were created. Two experiments were performed, with the first test examining the MKWs of FSKs produced on specimens that were restrained using a bench vise, while the second test analyzed the MKWs of FSKs produced on minimally restrained specimens. Statistical analysis using Hierarchical Linear Modeling (HLM) indicated a positive relationship between saw blade width (mm) and MKW, with blade width (p < 0.001) and the overall difference between the mechanical- and manual-powered saws (p = 0.029) tested, reaching statistical significance. A comparison of MKWs produced using manual-powered saws on restrained and minimally restrained bones suggests that restraint condition (p = 0.009) has a statistically significant effect. In comparisons of MKWs to blade widths, the average ratio for mechanical-powered saws is 18.7% greater than the average ratio for manual-powered saws. While the mode of the ratios was 1.42, thus supporting the general rule that MKW does not exceed 1.5 times blade width, multiple individual ratios did surpass 1.5.

Classification of violent behavior, including dismemberment and mutilation, has become increasingly more significant. This study uses a data-driven classification system based upon knowledge drawn from the pertinent literature, and examination of cases of offenders who have dismembered or mutilated their victims. The latter were extracted from the Serial Killer Database, as well as media sources, and assessed for characteristics of the perpetrators and victim(s). An informational form was developed and used to establish quantitative parameters and objectively extract pertinent information that could be used for comparison and pattern analysis. Motives and styles, as well as the organized/disorganized dichotomy for murder and dismemberment/mutilation, were examined for each case. The majority of cases demonstrated defensive styles (60%), with the second most common being offensive styles (26%), which differs from previous studies that do not exclude older cases. Additionally, 68% of cases reflected organized patterns for both murder and the acts of dismemberment or mutilation. The results support a data-driven classification system that may serve as a foundational model for the investigation of specific motives of this type of deviant behavior in future research.

A review of New York City dismemberment cases occurring between 1996 and 2017 was conducted, which resulted in a total of 55 dismembered decedents in a 22-year period. Annual trends indicate an average of 2.5 dismembered decedents. Additional results show that 53% of cases involved transection only, 35% involved disarticulation only, and 13% involved a combination of both. When the entire body could be accounted for, the average number of body portions per case was 5.5. Frequent locations for dismemberment were the neck, shoulders, hips, and knees. Dismemberment locations showed a general trend of anatomical symmetry. Seventy-eight percent of the dismemberments involve disposal of body parts in an outside location. Eighty-four percent were concealed from view with some type of covering. The findings from New York City are compared with other studies.