Coordination compounds, like iron(II) triazole complexes, exhibit spin crossover (SCO) behavior at around room temperature. Therefore, they are interesting for a variety of possible applications, and it is convenient to integrate them into polymers. Due to a reduction of the iron content and thus also 57Fe content in the sample through integration in polymers, Mössbauer measurements are only possible with greater difficulty or very long measurement times without expensive enrichment of the samples with 57Fe. So, other ways of improving the Mössbauer signal for these composite materials are necessary. Therefore, we pressed these composite materials to improve the Mössbauer spectra. In this study, we synthesized an iron(II) triazole spin crossover complex and an electrospun polymer complex composite nanofiber material including the same complex. For both products, Mössbauer measurements were performed at room temperature before and after using a press to show that the complex composite is not harmed through pressing. We investigate the influence of the pressing impact on the Mössbauer measurements in the context of measurement statistics and the measured signals. We show that pressing is not connected to any changes in the sample regarding the spin and oxidation state. We present that pressing improves the statistics of the Mössbauer measurements significantly. Furthermore, we use SEM measurements and PXRD to investigate whether or not the obtained fiber mats are destroyed in the pressing process.

BACKGROUND: Members of the fungal kingdom are heterotrophic eukaryotes encased in a chitin containing cell wall. This polymer is vital for cell wall stiffness and, ultimately, cell shape. Most fungal genomes contain numerous putative chitin synthase encoding genes. However, systematic functional analysis of the full chitin synthase catalogue in a given species is rare. This greatly limits fundamental understanding and potential applications of manipulating chitin synthesis across the fungal kingdom.
RESULTS: In this study, we conducted in silico profiling and subsequently deleted all predicted chitin synthase encoding genes in the multipurpose cell factory Aspergillus niger. Phylogenetic analysis suggested nine chitin synthases evolved as three distinct groups. Transcript profiling and co-expression network construction revealed remarkably independent expression, strongly supporting specific role(s) for the respective chitin synthases. Deletion mutants confirmed all genes were dispensable for germination, yet impacted colony spore titres, chitin content at hyphal septa, and internal architecture of submerged fungal pellets. We were also able to assign specific roles to individual chitin synthases, including those impacting colony radial growth rates (ChsE, ChsF), lateral cell wall chitin content (CsmA), chemical genetic interactions with a secreted antifungal protein (CsmA, CsmB, ChsE, ChsF), resistance to therapeutics (ChsE), and those that modulated pellet diameter in liquid culture (ChsA, ChsB). From an applied perspective, we show chsF deletion increases total protein in culture supernatant over threefold compared to the control strain, indicating engineering filamentous fungal chitin content is a high priority yet underexplored strategy for strain optimization.
CONCLUSIONS: This study has conducted extensive analysis for the full chitin synthase encoding gene repertoire of A. niger. For the first time we reveal both redundant and non-redundant functional roles of chitin synthases in this fungus. Our data shed light on the complex, multifaceted, and dynamic role of chitin in fungal growth, morphology, survival, and secretion, thus improving fundamental understanding and opening new avenues for biotechnological applications in fungi.

This study evaluated the effect of feeding ergot contaminated grain continuously or intermittently through backgrounding (BG) and finishing (FN) in a mash or pelleted supplement on the growth performance, health and welfare parameters, and carcass characteristics of feedlot beef steers. Sixty black Angus steers (300 ± 29.4 kg BW) were used in a complete randomized 238-d study. Steers were stratified by weight and randomly assigned to four different diets (15 steers/treatment) and individually housed. Treatments included: (1) control [CON; no added ergot alkaloids (EA)], (2) continuous ergot mash (CEM; fed continuously at 2 mg total EA/kg of DM), (3) intermittent ergot mash (IEM; fed at 2 mg total EA/kg of DM, during the first week of each 21-d period and CON for the remaining 2 wk, this feeding pattern was repeated in each period), and (4) intermittent ergot pellet (IEP; fed at 2 mg of total EA/kg of DM as a pellet during the first week of each 21-d period and CON for the remaining 2 wk as described for IEM). Steers were fed barley based BG diets containing 40% concentrate:60% silage (DM basis) for 84 d (four 21-d periods), transitioned over 28 d (no ergot fed) to an FN diet (90% concentrate:10% silage DM basis) and fed for 126 d (six 21-d periods) before slaughter. In the BG phase, steer DMI (P < 0.01, 7.45 vs. 8.05 kg/d) and ADG (P < 0.01) were reduced for all EA diets compared to CON. The CEM fed steers had lower ADG (P < 0.01, 0.735 vs. 0.980 kg) and shrunk final BW (P < 0.01, 350 vs. 366 kg) than CON. CEM had lower gain:feed (P < 0.07, 0.130 vs. 0.142) than CON. In the FN phase, steer DMI (P < 0.01, 9.95 vs. 11.05 kg/d) and ADG (P = 0.04) were also decreased for all EA fed steers compared to CON. Total shrunk BW gain (P = 0.03, 202.5 vs. 225.2 kg), final BW (P = 0.03, 617.9 vs. 662.2 kg), and carcass weight (P = 0.06) decreased for all EA fed steers compared to CON. The percentage of AAA carcasses decreased for all EA fed steers (P < 0.01, 46.7 vs. 93.3%) compared to CON. EA fed steers had increased rectal temperatures (P < 0.01, 39.8 vs. 39.4 °C) compared to CON. Pelleting ergot contaminated grain did not reduce the impact of ergot alkaloids on any of the measured parameters during BG or FN. Continuously or intermittently feeding ergot contaminated diets (2 mg total EA/kg of DM) significantly reduced intake, growth performance, and carcass weight, with minimal impact on blood parameters in feedlot steers. Pelleting was not an effective method of reducing ergot toxicity.
Produced by the fungus Claviceps purpurea, ergot alkaloids (EA) are toxic to beef cattle when consumed and can lead to reduction in feed intake and growth performance, vasoconstriction of the blood vessels, hyperthermia, damage to extremities (ears, tails, and hooves) and in severe cases, death. Grain is often cleaned to meet quality standards, and the resulting screenings are often utilized for feeding livestock and can have high concentrations of EA. The application of heat during pelleting of EA contaminated grain has been suggested to reduce its toxicity. Backgrounding and finishing beef cattle feeding experiments were conducted to assess the effect of continuously or intermittently feeding EA contaminated grain (2 mg/kg of diet DM) either as a pellet or as mash on growth performance, health, and animal welfare. Feeding EA grain continuously or intermittently either as a mash or pellet drastically reduced growth performance of steers, with no difference between treatments.

UNASSIGNED: Testosterone treatment is employed in transgender men to help them affirm their gender. Our objective is to report the cases of 2 transgender men who received subdermal testosterone pellets as the mode of testosterone administration.
UNASSIGNED: Both patients presented for discussion of testosterone therapy. Patient 1 was a 47-year-old transgender male. He had bilateral mastectomy and total abdominal hysterectomy with bilateral salpingo-oophorectomy (TAH-BSO). Physical exam was significant for obesity. He was on injectable testosterone for 9 years and experienced voice deepening, facial hair growth, temporal hair thinning, and increased skin oiliness, but was interested in a long-acting testosterone formulation. Pellets were well tolerated, but the patient ultimately chose to return to injections. Patient 2 was a 20-year-old transgender male with no history of gender-affirming surgeries. Physical exam was pertinent for a thin, masculinized individual. He started on testosterone gel, but switched to weekly injections, on which he experienced voice deepening, increased skin oiliness and cessation of menses. Due to pain with injections and desire for a long-acting formulation, he elected to try pellets.
UNASSIGNED: The dose of testosterone pellets used in transgender men are similar to those employed for testosterone replacement in hypogonadal cisgender men.
UNASSIGNED: Subdermal testosterone pellets may be suitable as a means of delivering testosterone in transgender men, but the 2 cases reported here do not permit firm conclusions. Given the widespread use of testosterone for gender affirmation in transgender men, a prospective controlled study of subdermal testosterone pellets seems indicated.

Air pollution and the increasing production of greenhouse gases has prompted greater use of renewable energy sources; the EU has set a target that the use of green energy should be at 32 percent by 2030. With this in mind, in the last 10 years, the demand for pellets in Italy has more than doubled, making Italy the second largest consumer in Europe. The quality of the pellets burned in stoves is crucial to indoor and outdoor pollution. Among other parameters, moisture and ash are used to classify pellets according to EN ISO 17225:2014. This work involved the analysis of the organic and inorganic fraction of both some finished products on the Italian market and some raw materials (e.g., wood chips) sampled according to the technical standard EN 14778:2011. The analytical results showed the presence of some substances potentially harmful to human health such as formaldehyde, acetone, toluene and styrene for the organic fraction and nickel, lead and vanadium for the inorganic fraction. The chemometric approach showed that it is the inorganic fraction which is most responsible for the diversification of the samples under study. The detection of some substances may be a warning bell about the impact of such materials, both for the environment and for human health.

Few data are available evaluating the stability of direct-fed microbials (DFM) following their inclusion in different feed matrices. Therefore, six Exp. evaluated the recovery of bacilli spores (BOVACILLUSTM; Exp. 1 to 3) and an Enterococcus faecium DFM (LACTIFERM®; Exp. 4 to 6) when included in different feed preparations. The Bacillus-based DFM was included into pelleted feed prepared in different temperatures (75 to 95 °C), whereas both DFM were assessed in premix and milk replacer preparations. Bacillus spores and E. faecium recovery was evaluated through standard methodologies and data were reported as log10 colony forming units/gram of feed. The recovery of Bacillus spores was within the expected range and was not impacted by the temperature of pellet preparation (Exp. 1). Bacilli recovery was also stable up to 12 months in the premix and was not impacted by the temperature of milk replacer preparation. Regarding the Exp. with E. faecium (Exp. 4 to 6), its recoveries in the mineral premix and milk powder did not differ from T0 and were not impacted by the conditions of milk replacer preparation. These data are novel and demonstrate the stability of a Bacillus-based and an E. faecium-based DFM when included in different feed matrices often used in dairy production.

BACKGROUND: Filamentous fungi are used as industrial cell factories to produce a diverse portfolio of proteins, organic acids, and secondary metabolites in submerged fermentation. Generating optimized strains for maximum product titres relies on a complex interplay of molecular, cellular, morphological, and macromorphological factors that are not yet fully understood.
RESULTS: In this study, we generate six conditional expression mutants in the protein producing ascomycete Aspergillus niger and use them as tools to reverse engineer factors which impact total secreted protein during submerged growth. By harnessing gene coexpression network data, we bioinformatically predicted six morphology and productivity associated \'morphogenes\', and placed them under control of a conditional Tet-on gene switch using CRISPR-Cas genome editing. Strains were phenotypically screened on solid and liquid media following titration of morphogene expression, generating quantitative measurements of growth rate, filamentous morphology, response to various abiotic perturbations, Euclidean parameters of submerged macromorphologies, and total secreted protein. These data were built into a multiple linear regression model, which identified radial growth rate and fitness under heat stress as positively correlated with protein titres. In contrast, diameter of submerged pellets and cell wall integrity were negatively associated with productivity. Remarkably, our model predicts over 60% of variation in A. niger secreted protein titres is dependent on these four variables, suggesting that they play crucial roles in productivity and are high priority processes to be targeted in future engineering programs. Additionally, this study suggests A. niger dlpA and crzA genes are promising new leads for enhancing protein titres during fermentation.
CONCLUSIONS: Taken together this study has identified several potential genetic leads for maximizing protein titres, delivered a suite of chassis strains with user controllable macromorphologies during pilot fermentation studies, and has quantified four crucial factors which impact secreted protein titres in A. niger.

This study was conducted to evaluate the effect of feed form and nutrient density on growth performance, blood parameters, and intestinal traits of broiler breeder pullets during grower (7-19 wk) and pre-breeder (19 weeks to 5% production) periods. A total of 450 female broiler breeder pullets were used in a completely randomized design with a 3 × 2 factorial arrangement including 3 feed forms (mash, crumble, and pellet) and 2 nutrient densities (standard diet with the nutrient requirement of Ross 308 parent stock nutrition specification, and diluted diet by using sunflower hull to have 10% lower nutrient than the standard diet). Five replicates with 15 pullets per replicate were allocated to each of the 6 treatments. Blood samples were collected at 19 wk of age. Egg production reached 5% in the mid of 25 wk. Results showed that pullets fed crumble or pellet diets had greater body weight gain and a lower feed to gain ratio (F:G; P < 0.001). Diet dilution led to a decrease in body weight gain while increasing the F:G (P < 0.05). Pullets fed the pellet diets had shorter eating times than those fed crumble diets, whereas the longest eating time belonged to pullets fed mash diets (P < 0.001). Pullets fed pellet diet had a greater heterophil to lymphocyte (H/L) ratio than those fed crumble or mash diets (P = 0.007). Diluting the diet led to a decrease in the H/L ratio (P = 0.026). Neither feed form nor nutrient density had a significant effect on body weight uniformity, blood glucose and lipid concentrations, liver enzyme activities, and intestinal traits (P > 0.05). It can be concluded that pelleted or crumbled diets with lower nutrient density can be considered in broiler breeder\'s pullets feeding with no detrimental effect on their performance or health state.

This review focuses on disordered, or amorphous, porous heterogeneous catalysts, especially those in the forms of pellets and monoliths. It considers the structural characterisation and representation of the void space of these porous media. It discusses the latest developments in the determination of key void space descriptors, such as porosity, pore size, and tortuosity. In particular, it discusses the contributions that can be made by various imaging modalities in both direct and indirect characterisations and their limitations. The second part of the review considers the various types of representations of the void space of porous catalysts. It was found that these come in three main types, which are dependent on the level of idealisation of the representation and the final purpose of the model. It was found that the limitations on the resolution and field of view for direct imaging methods mean that hybrid methods, combined with indirect porosimetry methods that can bridge the many length scales of structural heterogeneity and provide more statistically representative parameters, deliver the best basis for model construction for understanding mass transport in highly heterogeneous media.

UNASSIGNED: Rising number of the nonresponding dermatophytic infections raises deep concerns among the dermatologists across the nation. Variations in the quality of itraconazole may be a contributing factor to nonresponse in certain dermatophytic infections. This article will address this issue in a simple way of analyzing things in an OPD and may help us in being aware and taking the right foot forward.
UNASSIGNED: To assess the quality of itraconazole brands by observing the morphological properties of pellets/beads in different brands.
UNASSIGNED: In this study, 10 brands of itraconazole that are commonly used in clinical practice were randomly selected. Pellet counts and qualitative morphological analysis of pellets as size (small, large, or mixed), shape (uniform or nonuniform), and presence of amorphous material was performed by three independent observers. Also, dissolution profile of some brands was assessed by adding the pellets in equal quantity of water.
UNASSIGNED: The pellet counts of brands varied from 856 pellets per capsule in brand 1 to 109 pellets per capsule in brand 8. Brand 1, brand 2, and brand 7 pellets were small and uniform in morphology. Brand 3, brand 4, and brand 10 pellets were mixed in size but uniform in morphology. Brand 9 pellets were mixed and nonuniform whereas brand 5, brand 6, and brand 8 pellets were mixed in size, nonuniform in shape, and had presence of amorphous material. Dissolution test revealed that brand 5 dissolved rapidly and turned clear water color to milky white.
UNASSIGNED: A simple dermoscopy examination of itraconazole pellets may provide thoughtful insights about the quality of itraconazole brand. It may be considered as routine practice for all dermatophytic infection planned for treatment with itraconazole.