Grain size is an important appearance quality trait in rice, which also affects grain yield. In this study, a recombinant inbred line (RIL) population derived from a cross between indica variety 9311 and japonica variety Cypress was constructed. And 181 out of 600 RILs were sequenced, and a high-density genetic map containing 2842 bin markers was constructed, with a total map length of 1500.6 cM. A total of 10 quantitative trait loci (QTL) related to grain length (GL), grain width (GW), grain length-to-width ratio (LWR), and 1000-grain weight (TGW) were detected under two environments. The genetic effect of qGL4, a minor QTL for GL and TGW, was validated using three heterogeneous inbred family (HIF) segregation populations. It was further dissected into two closed linked QTL, qGL4.1 and qGL4.2. By progeny testing, qGL4.1 and qGL4.2 were successfully delimited to intervals of 1304-kb and 423-kb, respectively. Our results lay the foundation for the map-based cloning of qGL4.1 and qGL4.2 and provide new gene resources for the improvement of grain yield and quality in rice.
UNASSIGNED: The online version contains supplementary material available at 10.1007/s11032-024-01447-y.

Understanding the genetic basis of seed Ni and Mo is essential. Since soybean is a major crop in the world and a major source for nutrients, including Ni and Mo, the objective of the current research was to map genetic regions (quantitative trait loci, QTL) linked to Ni and Mo concentrations in soybean seed. A recombinant inbred line (RIL) population was derived from a cross between \'Forrest\' and \'Williams 82\' (F × W82). A total of 306 lines was used for genotyping using 5405 single nucleotides polymorphism (SNP) markers using Infinium SNP6K BeadChips. A two-year experiment was conducted and included the parents and the RIL population. One experiment was conducted in 2018 in North Carolina (NC), and the second experiment was conducted in Illinois in 2020 (IL). Logarithm of the odds (LOD) of ≥2.5 was set as a threshold to report identified QTL using the composite interval mapping (CIM) method. A wide range of Ni and Mo concentrations among RILs was observed. A total of four QTL (qNi-01, qNi-02, and qNi-03 on Chr 2, 8, and 9, respectively, in 2018, and qNi-01 on Chr 20 in 2020) was identified for seed Ni. All these QTL were significantly (LOD threshold > 2.5) associated with seed Ni, with LOD scores ranging between 2.71-3.44, and with phenotypic variance ranging from 4.48-6.97%. A total of three QTL for Mo (qMo-01, qMo-02, and qMo-03 on Chr 1, 3, 17, respectively) was identified in 2018, and four QTL (qMo-01, qMo-02, qMo-03, and qMo-04, on Chr 5, 11, 14, and 16, respectively) were identified in 2020. Some of the current QTL had high LOD and significantly contributed to the phenotypic variance for the trait. For example, in 2018, Mo QTL qMo-01 on Chr 1 had LOD of 7.8, explaining a phenotypic variance of 41.17%, and qMo-03 on Chr 17 had LOD of 5.33, with phenotypic variance explained of 41.49%. In addition, one Mo QTL (qMo-03 on Chr 14) had LOD of 9.77, explaining 51.57% of phenotypic variance related to the trait, and another Mo QTL (qMo-04 on Chr 16) had LOD of 7.62 and explained 49.95% of phenotypic variance. None of the QTL identified here were identified twice across locations/years. Based on a search of the available literature and of SoyBase, the four QTL for Ni, identified on Chr 2, 8, 9, and 20, and the five QTL associated with Mo, identified on Chr 1, 17, 11, 14, and 16, are novel and not previously reported. This research contributes new insights into the genetic mapping of Ni and Mo, and provides valuable QTL and molecular markers that can potentially assist in selecting Ni and Mo levels in soybean seeds.

Chickpea (Cicer arietinum L.) is one of the most important crops worldwide and a valuable nutritional source. The availability of data from different genotypes and populations is important for the comprehension of the biology and trait control of chickpea. Tissue from young leaves was collected from adult plants and sequenced using an Illumina HiSeq X platform, which provided sequencing data for a total of 169 individuals from two different populations. Furthermore, functional annotation was performed with BLAST2GO software in a candidate region for resistance to Ascochyta blight, a devastating disease that produces huge yield reductions if the growth conditions are optimal for the fungus. A total of 273 different genes in a region spanning ∼4.67 Mb in chromosome 4 were fully annotated. The raw DNA sequences and functional annotation data can be reused by the scientific community for the analysis of different agronomic traits of interest in chickpea.

Soybean seed sugars are among the most abundant beneficial compounds for human and animal consumption in soybean seeds. Higher seed sugars such as sucrose are desirable as they contribute to taste and flavor in soy-based food. Therefore, the objectives of this study were to use the \'Forrest\' by \'Williams 82\' (F × W82) recombinant inbred line (RIL) soybean population (n = 309) to identify quantitative trait loci (QTLs) and candidate genes that control seed sugar (sucrose, stachyose, and raffinose) contents in two environments (North Carolina and Illinois) over two years (2018 and 2020). A total of 26 QTLs that control seed sugar contents were identified and mapped on 16 soybean chromosomes (chrs.). Interestingly, five QTL regions were identified in both locations, Illinois and North Carolina, in this study on chrs. 2, 5, 13, 17, and 20. Amongst 57 candidate genes identified in this study, 16 were located within 10 Megabase (MB) of the identified QTLs. Amongst them, a cluster of four genes involved in the sugars\' pathway was collocated within 6 MB of two QTLs that were detected in this study on chr. 17. Further functional validation of the identified genes could be beneficial in breeding programs to produce soybean lines with high beneficial sucrose and low raffinose family oligosaccharides.

The increasing demand for rare earth elements (REEs), especially from new and innovative technology, has strained their supply, which makes the exploration of new REE sources necessary, for example, the recovery of REEs from phsophogypsum (PG). PG is a byproduct during the wet production of phosphoric acid, which is an attractive secondary resource for REEs due to a large amount of REEs locked in them. In most cases, REEs contained in PG are mainly encapsulated in the gypsum crystal, leading to a low leaching efficiency. Therefore, it is particularly important to use various methods to enhance the leaching of REEs from PG. In this review, we summarized and classified various enhanced leaching methods for the recovery of REEs from PG, and the advantages and disadvantages of different methods were compared. A joint method of recrystallization and RIL may be a promising enhanced leaching approach for the recovery of REEs from PG. Recrystallization could achieve both the complete REE release and simultaneous preparation of industrial materials with high value added, such as high-strength α-hemihydrate gypsum by phase transformation of PG, and the RIL technology could adsorb the releasing REEs and realize their efficient extraction. Such a combination appears to show significant advantages because of high REE recovery, as well as high value-added product preparation at low cost.

Rice grain size is a key determinant of both grain yield and quality. In this study, we conducted QTL mapping on grain size using a recombinant inbred line (RIL) population derived from a cross between japonica variety Beilu130 (BL130) and indica variety Jin23B (J23B). A total of twenty-two QTL related to grain length (GL), grain width (GW), grain length-to-width ratio (LWR), grain thickness (GT), and thousand grain weight (TGW) were detected under two environments, and 14 of them were repeatedly detected. Two minor QTL, qTGW2b and qGL9, were validated and further delimited to regions of 631 kb and 272 kb, respectively. Parental sequence comparison of genes expressed in inflorescence in corresponding candidate regions identified frameshifts in the exons of LOC_Os02g38690 and LOC_Os02g38780, both of which encode protein phosphatase 2C-containing protein, and LOC_Os09g29930, which encodes a BIM2 protein. Scanning electron microscopy (SEM) analysis revealed that the increase of cell size rather than cell number caused the differences in grain size between NILs of qTGW2b and qGL9. Quantitative RT-PCR analysis showed that the expression levels of EXPA4, EXPA5, EXPA6, EXPB3, EXPB4, and EXPB7 were significantly different in both qTGW2b NILs and qGL9 NILs. Our results lay the foundation for the cloning of qTGW2b and qGL9, and provide genetic materials for the improvement of rice yield and quality.
UNASSIGNED: The online version contains supplementary material available at 10.1007/s11032-022-01328-2.

To assess the refractive outcomes and effect on endothelial cell density of refractive implantable lens (RIL) implantation following deep anterior lamellar keratoplasty (DALK).
A retrospective study was conducted on 10 eyes of 10 patients who had undergone DALK and subsequently underwent toric RIL implantation. The patients were followed up over a period of 1 year. The parameters compared were uncorrected and best corrected visual acuity, spherical and cylindrical acceptance, mean refractive spherical equivalent, and endothelial cell counts.
There was a significant improvement (P < 0.05) from preoperatively to 1 month postoperatively in the mean log of minimum angle of resolution (logMAR) uncorrected distance visual acuity (UCVA; 1.1 ± 0.1 to 0.3 ± 0.1), spherical refraction (5.4 ± 3.8 to 0.3 ± 0.1 D), cylindrical refraction (5.4 ± 3.2 to 0.8 ± 0.7 D), and MRSE (7.4 ± 3.5 to 0.5 ± 0.4 D). Three patients achieved spectacle independence for distance vision with a residual MRSE less than 1 D in the other cases. A stable refraction was maintained up to 1 year follow-up in all cases. There was a 2.3% mean decline in endothelial cell counts at 1 year of follow-up. No intraoperative or postoperative complications were seen in any case up to 1 year of follow-up.
RIL implantation is an effective and safe procedure for the correction of high ametropia post-DALK.

Rapeseed (Brassica napus L.) is a crucial oil crop cultivated worldwide. First branch height, an essential component of rapeseed plant architecture, has an important effect on yield and mechanized harvesting; however, the underlying genetic mechanism remains unclear. In this study, based on the 60K single nucleotide polymorphism array and a recombinant inbred lines population derived from M083 and 888-5, a total of 19 QTLs were detected in five environments, distributed on linkage groups A02, A09, A10, C06, and C07, which explained phenotypic variation ranging from 4.87 to 29.87%. Furthermore, 26 significant SNPs were discovered on Chr.A02 by genome-wide association study in a diversity panel of 324 re-sequencing accessions. The major QTL of the first branch height trait was co-located on Chr.A02 by integrating linkage mapping and association mapping. Eleven candidate genes were screened via allelic variation analysis, inter-subgenomic synteny analysis, and differential expression of genes in parental shoot apical meristem tissues. Among these genes, BnaA02g13010D, which encodes a TCP transcription factor, was confirmed as the target gene according to gene function annotation, haplotype analysis, and full-length gene sequencing, which revealed that TATA insertion/deletion in the promoter region was closely linked to significantly phenotypic differences BnaA02.TCP1 M083 overexpression resulted in decreased branch height and increased branch number in Arabidopsis. These results provide a genetic basis for first branch height and the ideal architecture of B. napus.

With global warming and regional decreases in precipitation, drought has become a problem worldwide. As the number of arid regions in the world is increasing, drought has become a major factor leading to significant crop yield reductions and food crises. Soybean is a crop that is relatively sensitive to drought. It is also a crop that requires more water during growth and development. The aim of this study was to identify the quantitative trait locus (QTL) that affects drought tolerance in soybean by using a recombinant inbred line (RIL) population from a cross between the drought-tolerant cultivar \'Jindou21\' and the drought-sensitive cultivar \'Zhongdou33\'. Nine agronomic and physiological traits were identified under drought and well-watered conditions. Genetic maps were constructed with 923,420 polymorphic single nucleotide polymorphism (SNP) markers distributed on 20 chromosomes at an average genetic distance of 0.57 centimorgan (cM) between markers. A total of five QTLs with a logarithm of odds (LOD) value of 4.035-8.681 were identified on five chromosomes. Under well-watered conditions and drought-stress conditions, one QTL related to the main stem node number was located on chromosome 16, accounting for 17.177% of the phenotypic variation. Nine candidate genes for drought resistance were screened from this QTL, namely Glyma.16G036700, Glyma.16G036400, Glyma.16G036600, Glyma.16G036800, Glyma.13G312700, Glyma.13G312800, Glyma.16G042900, Glyma.16G043200, and Glyma.15G100700. These genes were annotated as NAC transport factor, GATA transport factor, and BTB/POZ-MATH proteins. This result can be used for molecular marker-assisted selection and provide a reference for breeding for drought tolerance in soybean.

Upland cotton (Gossypium hirsutum) is widely planted around the world for its natural fiber, and producing high-quality fiber is essential for the textile industry. CCRI70 is a hybrid cotton plant harboring superior yield and fiber quality, whose recombinant inbred line (RIL) population was developed from two upland cotton varieties (sGK156 and 901-001) and were used here to investigate the source of high-quality related alleles. Based on the material of the whole population, a high-density genetic map was constructed using specific locus-amplified fragment sequencing (SLAF-seq). It contained 24,425 single nucleotide polymorphism (SNP) markers, spanning a distance of 4,850.47 centimorgans (cM) over 26 chromosomes with an average marker interval of 0.20 cM. In evaluating three fiber quality traits in nine environments to detect multiple environments stable quantitative trait loci (QTLs), we found 289 QTLs, of which 36 of them were stable QTLs and 18 were novel. Based on the transcriptome analysis for two parents and two RILs, 24,941 unique differentially expressed genes (DEGs) were identified, 473 of which were promising genes. For the fiber strength (FS) QTLs, 320 DEGs were identified, suggesting that pectin synthesis, phenylpropanoid biosynthesis, and plant hormone signaling pathways could influence FS, and several transcription factors may regulate fiber development, such as GAE6, C4H, OMT1, AFR18, EIN3, bZIP44, and GAI. Notably, the marker D13_56413025 in qFS-chr18-4 provides a potential basis for enhancing fiber quality of upland cotton via marker-assisted breeding and gene cloning of important fiber quality traits.