Grain size is an important appearance quality trait in rice, which also affects grain yield. In this study, a recombinant inbred line (RIL) population derived from a cross between indica variety 9311 and japonica variety Cypress was constructed. And 181 out of 600 RILs were sequenced, and a high-density genetic map containing 2842 bin markers was constructed, with a total map length of 1500.6 cM. A total of 10 quantitative trait loci (QTL) related to grain length (GL), grain width (GW), grain length-to-width ratio (LWR), and 1000-grain weight (TGW) were detected under two environments. The genetic effect of qGL4, a minor QTL for GL and TGW, was validated using three heterogeneous inbred family (HIF) segregation populations. It was further dissected into two closed linked QTL, qGL4.1 and qGL4.2. By progeny testing, qGL4.1 and qGL4.2 were successfully delimited to intervals of 1304-kb and 423-kb, respectively. Our results lay the foundation for the map-based cloning of qGL4.1 and qGL4.2 and provide new gene resources for the improvement of grain yield and quality in rice.
UNASSIGNED: The online version contains supplementary material available at 10.1007/s11032-024-01447-y.

The increasing demand for rare earth elements (REEs), especially from new and innovative technology, has strained their supply, which makes the exploration of new REE sources necessary, for example, the recovery of REEs from phsophogypsum (PG). PG is a byproduct during the wet production of phosphoric acid, which is an attractive secondary resource for REEs due to a large amount of REEs locked in them. In most cases, REEs contained in PG are mainly encapsulated in the gypsum crystal, leading to a low leaching efficiency. Therefore, it is particularly important to use various methods to enhance the leaching of REEs from PG. In this review, we summarized and classified various enhanced leaching methods for the recovery of REEs from PG, and the advantages and disadvantages of different methods were compared. A joint method of recrystallization and RIL may be a promising enhanced leaching approach for the recovery of REEs from PG. Recrystallization could achieve both the complete REE release and simultaneous preparation of industrial materials with high value added, such as high-strength α-hemihydrate gypsum by phase transformation of PG, and the RIL technology could adsorb the releasing REEs and realize their efficient extraction. Such a combination appears to show significant advantages because of high REE recovery, as well as high value-added product preparation at low cost.

Rice grain size is a key determinant of both grain yield and quality. In this study, we conducted QTL mapping on grain size using a recombinant inbred line (RIL) population derived from a cross between japonica variety Beilu130 (BL130) and indica variety Jin23B (J23B). A total of twenty-two QTL related to grain length (GL), grain width (GW), grain length-to-width ratio (LWR), grain thickness (GT), and thousand grain weight (TGW) were detected under two environments, and 14 of them were repeatedly detected. Two minor QTL, qTGW2b and qGL9, were validated and further delimited to regions of 631 kb and 272 kb, respectively. Parental sequence comparison of genes expressed in inflorescence in corresponding candidate regions identified frameshifts in the exons of LOC_Os02g38690 and LOC_Os02g38780, both of which encode protein phosphatase 2C-containing protein, and LOC_Os09g29930, which encodes a BIM2 protein. Scanning electron microscopy (SEM) analysis revealed that the increase of cell size rather than cell number caused the differences in grain size between NILs of qTGW2b and qGL9. Quantitative RT-PCR analysis showed that the expression levels of EXPA4, EXPA5, EXPA6, EXPB3, EXPB4, and EXPB7 were significantly different in both qTGW2b NILs and qGL9 NILs. Our results lay the foundation for the cloning of qTGW2b and qGL9, and provide genetic materials for the improvement of rice yield and quality.
UNASSIGNED: The online version contains supplementary material available at 10.1007/s11032-022-01328-2.

Rapeseed (Brassica napus L.) is a crucial oil crop cultivated worldwide. First branch height, an essential component of rapeseed plant architecture, has an important effect on yield and mechanized harvesting; however, the underlying genetic mechanism remains unclear. In this study, based on the 60K single nucleotide polymorphism array and a recombinant inbred lines population derived from M083 and 888-5, a total of 19 QTLs were detected in five environments, distributed on linkage groups A02, A09, A10, C06, and C07, which explained phenotypic variation ranging from 4.87 to 29.87%. Furthermore, 26 significant SNPs were discovered on Chr.A02 by genome-wide association study in a diversity panel of 324 re-sequencing accessions. The major QTL of the first branch height trait was co-located on Chr.A02 by integrating linkage mapping and association mapping. Eleven candidate genes were screened via allelic variation analysis, inter-subgenomic synteny analysis, and differential expression of genes in parental shoot apical meristem tissues. Among these genes, BnaA02g13010D, which encodes a TCP transcription factor, was confirmed as the target gene according to gene function annotation, haplotype analysis, and full-length gene sequencing, which revealed that TATA insertion/deletion in the promoter region was closely linked to significantly phenotypic differences BnaA02.TCP1 M083 overexpression resulted in decreased branch height and increased branch number in Arabidopsis. These results provide a genetic basis for first branch height and the ideal architecture of B. napus.

With global warming and regional decreases in precipitation, drought has become a problem worldwide. As the number of arid regions in the world is increasing, drought has become a major factor leading to significant crop yield reductions and food crises. Soybean is a crop that is relatively sensitive to drought. It is also a crop that requires more water during growth and development. The aim of this study was to identify the quantitative trait locus (QTL) that affects drought tolerance in soybean by using a recombinant inbred line (RIL) population from a cross between the drought-tolerant cultivar \'Jindou21\' and the drought-sensitive cultivar \'Zhongdou33\'. Nine agronomic and physiological traits were identified under drought and well-watered conditions. Genetic maps were constructed with 923,420 polymorphic single nucleotide polymorphism (SNP) markers distributed on 20 chromosomes at an average genetic distance of 0.57 centimorgan (cM) between markers. A total of five QTLs with a logarithm of odds (LOD) value of 4.035-8.681 were identified on five chromosomes. Under well-watered conditions and drought-stress conditions, one QTL related to the main stem node number was located on chromosome 16, accounting for 17.177% of the phenotypic variation. Nine candidate genes for drought resistance were screened from this QTL, namely Glyma.16G036700, Glyma.16G036400, Glyma.16G036600, Glyma.16G036800, Glyma.13G312700, Glyma.13G312800, Glyma.16G042900, Glyma.16G043200, and Glyma.15G100700. These genes were annotated as NAC transport factor, GATA transport factor, and BTB/POZ-MATH proteins. This result can be used for molecular marker-assisted selection and provide a reference for breeding for drought tolerance in soybean.

Upland cotton (Gossypium hirsutum) is widely planted around the world for its natural fiber, and producing high-quality fiber is essential for the textile industry. CCRI70 is a hybrid cotton plant harboring superior yield and fiber quality, whose recombinant inbred line (RIL) population was developed from two upland cotton varieties (sGK156 and 901-001) and were used here to investigate the source of high-quality related alleles. Based on the material of the whole population, a high-density genetic map was constructed using specific locus-amplified fragment sequencing (SLAF-seq). It contained 24,425 single nucleotide polymorphism (SNP) markers, spanning a distance of 4,850.47 centimorgans (cM) over 26 chromosomes with an average marker interval of 0.20 cM. In evaluating three fiber quality traits in nine environments to detect multiple environments stable quantitative trait loci (QTLs), we found 289 QTLs, of which 36 of them were stable QTLs and 18 were novel. Based on the transcriptome analysis for two parents and two RILs, 24,941 unique differentially expressed genes (DEGs) were identified, 473 of which were promising genes. For the fiber strength (FS) QTLs, 320 DEGs were identified, suggesting that pectin synthesis, phenylpropanoid biosynthesis, and plant hormone signaling pathways could influence FS, and several transcription factors may regulate fiber development, such as GAE6, C4H, OMT1, AFR18, EIN3, bZIP44, and GAI. Notably, the marker D13_56413025 in qFS-chr18-4 provides a potential basis for enhancing fiber quality of upland cotton via marker-assisted breeding and gene cloning of important fiber quality traits.

Heterosis has been extensively applied for many traits during maize breeding, but there has been relatively little attention paid to the heterosis for kernel size. In this study, we evaluated a population of 301 recombinant inbred lines derived from a cross between 08-641 and YE478, as well as 298 hybrids from an immortalized F2 (IF2) population to detect quantitative trait loci (QTLs) for six kernel-related traits and the mid-parent heterosis (MPH) for these traits. A total of 100 QTLs, six pairs of loci with epistatic interactions, and five significant QTL × environment interactions were identified in both mapping populations. Seven QTLs accounted for over 10% of the phenotypic variation. Only four QTLs affected both the trait means and the MPH, suggesting the genetic mechanisms for kernel-related traits and the heterosis for kernel size are not completely independent. Moreover, more than half of the QTLs for each trait in the IF2 population exhibited dominance, implying that dominance is more important than other genetic effects for the heterosis for kernel-related traits. Additionally, 20 QTL clusters comprising 46 QTLs were detected across ten chromosomes. Specific chromosomal regions (bins 2.03, 6.04-6.05, and 9.01-9.02) exhibited pleiotropy and congruency across diverse heterotic patterns in previous studies. These results may provide additional insights into the genetic basis for the MPH for kernel-related traits.

Recombinant inbred lines (RILs) are an important resource for mapping genes controlling complex traits in many species. While RIL populations have been developed for maize, a maize RIL population with multiple teosinte inbred lines as parents has been lacking. Here, we report a teosinte nested association mapping (TeoNAM) population, derived from crossing five teosinte inbreds to the maize inbred line W22. The resulting 1257 BC1S4 RILs were genotyped with 51,544 SNPs, providing a high-density genetic map with a length of 1540 cM. On average, each RIL is 15% homozygous teosinte and 8% heterozygous. We performed joint linkage mapping (JLM) and a genome-wide association study (GWAS) for 22 domestication and agronomic traits. A total of 255 QTL from JLM were identified, with many of these mapping near known genes or novel candidate genes. TeoNAM is a useful resource for QTL mapping for the discovery of novel allelic variation from teosinte. TeoNAM provides the first report that PROSTRATE GROWTH1, a rice domestication gene, is also a QTL associated with tillering in teosinte and maize. We detected multiple QTL for flowering time and other traits for which the teosinte allele contributes to a more maize-like phenotype. Such QTL could be valuable in maize improvement.

Chlorophyll content, one of the most important physiological parameters related to plant photosynthesis, is usually used to predict yield potential. To map the quantitative trait loci (QTLs) underlying the chlorophyll content of rice leaves, a double haploid (DH) population was developed from an indica/japonica (Zhenshan 97/Wuyujing 2) crossing and two backcross populations were established subsequently by backcrossing DH lines with each of their parents. The contents of chlorophyll a and chlorophyll b were determined by using a spectrophotometer to directly measure the leaf chlorophyll extracts. To determine the leaf chlorophyll retention along with maturation, all measurements were performed on the day of heading and were repeated 30 days later. A total of 60 QTLs were resolved for all the traits using these three populations. These QTLs were distributed on 10 rice chromosomes, except chromosomes 5 and 10; the closer the traits, the more clustering of the QTLs residing on common rice chromosomal regions. In general, the majority of QTLs that specify chlorophyll a content also play a role in determining chlorophyll b content. Strangely, chlorophyll content in this study was found mostly to be lacking or to have a negative correlation with yield. In both backcross F1 populations, overdominant (or underdominant) loci were more important than complete or partially dominant loci for main-effect QTLs and epistatic QTLs, thereby supporting previous findings that overdominant effects are the primary genetic basis for depression in inbreeding and heterosis in rice.

A recombinant inbred line (RIL) population bred from a cross between a javanica type (cv. D50) and an indica type (cv. HB277) rice was used to map seven quantitative trait loci (QTLs) for thousand grain weight (TGW). The loci were distributed on chromosomes 2, 3, 5, 6, 8 and 10. The chromosome 3 QTL qTGW3.2 was stably expressed over two years, and contributed 9-10% of the phenotypic variance. A residual heterozygous line (RHL) was selected from the RIL population and its selfed progeny was used to fine map qTGW3.2. In this \"F2\" population, the QTL explained about 23% of the variance, rising to nearly 33% in the subsequent \"F2:3\" generation. The physical location of qTGW3.2 was confined to a ~556 kb region flanked by the microsatellite loci RM16162 and RM16194. The region also contains other factors influencing certain yield-related traits, although it is also possible that qTGW3.2 affects these in a pleiotropic fashion.