The structures of the Fc base of various IgG antibodies have been examined with a view to understanding how this region can be used to conjugate IgG to nanoparticles. The base structure is found to be largely consistent across a range of species and subtypes, comprising a hydrophobic region surrounded by hydrophilic residues, some of which are charged at physiological conditions. In addition, atomistic Molecular Dynamics simulations were performed to explore how model nanoparticles interact with the base using neutral and negatively charged gold nanoparticles. Both types of nanoparticle interacted readily with the base, leading to an adaptation of the antibody base surface to enhance the interactions. Furthermore, these interactions left the rest of the domain at the base of the Fc region structurally intact. This implies that coupling nanoparticles to the base of an IgG molecule is both feasible and desirable, since it leaves the antibody free to interact with its surroundings so that antigen-binding functionality can be retained. These results will therefore help guide future attempts to develop new nanotechnologies that exploit the unique properties of both antibodies and nanoparticles.

The surface morphology of titanium metal is an important factor affecting its hydrophilicity and biocompatibility, and exploring the surface treatment strategy of titanium metal is an important way to improve its biocompatibility . In this study , titanium (TA4) was firstly treated by large particle sand blasting and acid etching (SLA) technology, and then the obtained SLA-TA4 was treated by single surface treatments such as alkali-heat, ultraviolet light and plasma bombardment. According to the experimental results, alkali-heat treatment is the best treatment method to improve and maintain surface hydrophilicity of titanium. Then, the nanowire network morphology of titanium surface and its biological property, formed by further surface treatments on the basis of alkali-heat treatment, were investigated. Through the cell adhesion experiment of mouse embryonic osteoblast cells (MC3T3-E1), the ability of titanium material to support cell adhesion and cell spreading was investigated after different surface treatments. The mechanism of biological activity difference of titanium surface formed by different surface treatments was investigated according to the contact angle, pit depth and roughness of the titanium sheet surface. The results showed that the SLA-TA4 titanium sheet after a treatment of alkali heat for 10 h and ultraviolet irradiation for 1 h has the best biological activity and stability. From the perspective of improving surface bioactivity of medical devices, this study has important reference value for relevant researches on surface treatment of titanium implantable medical devices.
钛金属的表面形貌是影响其亲水性及生物相容性的重要因素，探究钛金属表面处理策略是提高其生物相容性的重要途径。本文先采用大颗粒喷砂酸蚀技术（SLA）处理钛金属A4（TA4），对得到的SLA-TA4进行碱热、紫外光照及等离子体轰击等单一方式表面处理。根据实验结果得出，碱热处理是提高并保持钛金属SLA-TA4亲水性的最佳单一处理方法。随后，在碱热处理的基础上，继续研究多种表面处理方式形成的钛金属表面纳米线网络结构及其生物性能。通过小鼠胚胎成骨前体细胞MC3T3-E1黏附实验，比较了不同方式表面处理后，钛金属材料支持细胞黏附、细胞铺展的能力，并根据不同表面处理方式形成的材料表面接触角、微坑深度及粗糙度等参数，分析探讨多种表面处理方式造成的生物活性差异的机制。结果表明，经碱热处理10 h及紫外照射1 h处理后的SLA-TA4 表现出最佳的生物活性及稳定性。从提高医疗器械表面生物活性的角度考虑，本文研究结果或对钛金属植入性器械的表面处理相关研究提供有价值的参考。.

ZnO nanorod nonwoven fabrics (ZNRN) were developed through hydrothermal synthesis to facilitate the prevention of the transmission of respiratory pathogens. The superhydrophobicity and antibacterial properties of ZNRN were improved through the response surface methodology. The synthesized material exhibited significant water repellency, indicated by a water contact angle of 163.9°, and thus demonstrated antibacterial rates of 91.8% for Escherichia coli (E. coli) and 79.75% for Staphylococcus aureus (S. aureus). This indicated that E. coli with thinner peptidoglycan may be more easily killed than S. aureus. This study identified significant effects of synthesis conditions on the antibacterial effectiveness, with comprehensive multivariate analyses elucidating the underlying correlations. In addition, the ZnO nanorod structure of ZNRN was characterized through SEM and XRD analyses. It endows the properties of superhydrophobicity (thus preventing bacteria from adhering to the ZNRN surface) and antibacterial capacity (thus damaging cells through the puncturing of these nanorods). Consequently, the alignment of two such features is desired to help support the development of personal protective equipment, which assists in avoiding the spread of respiratory infections.

A method is described to deconstruct the network of hydropathic interactions within and between a protein\'s sidechain and its environment into residue-based three-dimensional maps. These maps encode favorable and unfavorable hydrophobic and polar interactions, in terms of spatial positions for optimal interactions, relative interaction strength, as well as character. In addition, these maps are backbone angle-dependent. After map calculation and clustering, a finite number of unique residue sidechain interaction maps exist for each backbone conformation, with the number related to the residue\'s size and interaction complexity. Structures for soluble proteins (~749,000 residues) and membrane proteins (~387,000 residues) were analyzed, with the latter group being subdivided into three subsets related to the residue\'s position in the membrane protein: soluble domain, core-facing transmembrane domain, and lipid-facing transmembrane domain. This work suggests that maps representing residue types and their backbone conformation can be reassembled to optimize the medium-to-high resolution details of a protein structure. In particular, the information encoded in maps constructed from the lipid-facing transmembrane residues appears to paint a clear picture of the protein-lipid interactions that are difficult to obtain experimentally.

Miniaturized weak affinity chromatography is emerging as an interesting alternative to conventional biophysical tools for performing fragment-screening studies in the context of fragment-based drug discovery. In order to push back the analytical limits, it is necessary not only to control non-specific interactions with chromatographic support, but also to adapt this methodology by comparing the results obtained on an affinity column to a control column. The work presented in this study focused on fragment screening that targets a model membrane protein, the adenosine A2A receptor, embedded in nanodiscs (NDs) as biomimetic membranes. By studying the retention behavior of test fragment mixtures on supports modified with different types of NDs, we were able to determine the contribution of ND-related non-specific interactions, in particular the electrostatic effect of anionic phospholipids and the hydrophobic effect of neutral phospholipids. Different strategies for the preparation of control columns (empty NDs, orthosteric site blocking) were investigated and are presented for the first time. With these two types of control columns, the screening enabled the identification of two new fragments of AA2AR, which were confirmed by competition experiments and whose Kd values, estimated directly during the screening or after the competition experiments in frontal mode, were in good agreement.

Polyurethane/silk protein-bismuth halide oxide composite films were fabricated using a blending-wet phase transformationin situsynthesis method. The crystal structure, micromorphology, and optical properties were conducted using XRD, SEM, and UV-Vis DRS characterize techniques. The results indicated that loaded silk protein enhanced the hydrophilicity and pore structure of the polyurethane composite films. The active species BiOX were observed to grow as nanosheets with high dispersion on the internal skeleton and silk protein surface of the polyurethane-silk protein film. The photocatalytic efficiency of BiOX/PU-SF composite films was assessed through the degradation of Rhodamine B under visible light irradiation. Among the tested films, the BiOBr/PU-SF composite exhibited the highest removal rate of RhB at 98.9%, surpassing the removal rates of 93.7% for the BiOCl/PU-SF composite and 85.6% for the BiOI/PU-SF composite. Furthermore, an active species capture test indicated that superoxide radical (•O2-) and hole (h+) species played a predominant role in the photodegradation process.

Mcl-1 (myeloid cell leukemia 1), a member of the Bcl-2 family, is upregulated in various types of cancer. Peptides representing the BH3 (Bcl-2 homology 3) region of pro-apoptotic proteins have been demonstrated to bind the hydrophobic groove of anti-apoptotic Mcl-1, and this interaction is responsible for regulating apoptosis. Structural studies have shown that, while there is high overall structural conservation among the anti-apoptotic Bcl-2 (B-cell lymphoma 2) proteins, differences in the surface groove of these proteins facilitates binding specificity. This binding specificity is crucial for the mechanism of action of the Bcl-2 family in regulating apoptosis. Bim-based peptides bind specifically to the hydrophobic groove of Mcl-1, emphasizing the importance of these interactions in the regulation of cell death. Molecular docking was performed with BH3-like peptides derived from Bim to identify high affinity peptides that bind to Mcl-1 and to understand the molecular mechanism of their interactions. The interactions of three identified peptides, E2gY, E2gI, and XXA1_F3dI, were further evaluated using 250 ns molecular dynamics simulations. Conserved hydrophobic residues of the peptides play an important role in their binding and the structural stability of the complexes. Understanding the molecular basis of interaction of these peptides will assist in the development of more effective Mcl-1 specific inhibitors.

A high alkaline pH was previously demonstrated to enhance the extraction yield of brewer\'s spent grains (BSG) proteins. The effects of extraction pH beyond the extraction yield, however, has not been investigated before. The present work examined the effects of extraction pH (pH 8-12) on BSG proteins\' (1) amino acid compositions, (2) secondary structures, (3) thermal stability, and (4) functionalities (i.e., water/oil holding capacity, emulsifying, and foaming properties). The ideal extraction temperature (60 °C) and BSG-to-solvent ratio (1:20 w/v) for maximizing the extraction yield were first determined to set the conditions for the pH effect study. The results showed that a higher extraction pH led to more balanced compositions between hydrophilic and hydrophobic amino acids and higher proportions of random coils structures indicating increased protein unfolding. This led to superior emulsifying properties of the extracted proteins with more than twofold improvement between pH 8 and a pH larger than 10. The extraction pH, nevertheless, had minimal impact on the water/oil holding capacity, foaming properties, and thermal denaturation propensity of the proteins. The present work demonstrated that a high alkaline pH at pH 11-12 was indeed ideal for both maximizing the extraction yield (37-46 wt.%) and proteins\' functionalities.

Conserved tryptophan residues are critical for the structure and the stability of β/γ-crystallin in the lenses of vertebrates. During aging, in which the lenses are continuously exposed to ultraviolet irradiation and other environmental stresses, oxidation of tryptophan residues in β/γ-crystallin is triggered and impacts the lens proteins to varying degrees. Kynurenine derivatives, formed by oxidation of tryptophan, accumulate, resulting in destabilization and insolubilization of β/γ-crystallin, which correlates with age-related cataract formation. To understand the contribution of tryptophan modification on the structure and stability of human βB2-crystallin, five tryptophan residues were mutated to phenylalanine considering its similarity in structure and hydrophilicity to kynurenine. Among all mutants, W59F and W151F altered the stability and homo-oligomerization of βB2-crystallin-W59F promoted tetramerization whereas W151F blocked oligomerization. Most W59F dimers transformed into tetramer in a month, and the separated dimer and tetramer of W59F demonstrated different structures and hydrophobicity, implying that the biochemical properties of βB2-crystallin vary over time. By using SAXS, we found that the dimer of βB2-crystallin in solution resembled the lattice βB1-crystallin dimer (face-en-face), whereas the tetramer of βB2-crystallin in solution resembled its lattice tetramer (domain-swapped). Our results suggest that homo-oligomerization of βB2-crystallin includes potential inter-subunit reactions, such as dissociation, unfolding, and re-formation of the dimers into a tetramer in solution. The W>F mutants are useful in studying different folding states of βB2-crystallin in lens.

OBJECTIVE: to evaluate the morphological and functional characteristics of the peri-implant bone tissue that was formed during the healing process by the placement implants using two different surface treatments: hydrophilic Acqua™ (ACQ) and rough NeoPoros™ (NEO), in spontaneously hypertensive (SHR) and normotensive rats (Wistar) whether or not treated with losartan.
METHODS: In total, 96 male rats (48 Wistar and 48 SHR) were divided into eight subgroups: absolute control rough (COA NEO), absolute control hydrophilic (COA ACQ), losartan control rough (COL NEO), losartan control hydrophilic (COL ACQ), SHR absolute rough (SHR NEO), SHR absolute hydrophilic (SHR ACQ), SHR losartan rough (SHRL NEO), and SHR losartan hydrophilic (SHRL ACQ). The rats medicated with losartan received daily doses of the medication. NeoPoros™ and Acqua™ implants were installed in the tibiae of the rats. After 14 and 42 days of the surgery, the fluorochromes calcein and alizarin were injected in the rats. The animals were euthanized 67 days after treatment. The collected samples were analyzed by immunohistochemistry, biomechanics, microcomputerized tomography, and laser confocal scanning microscopy analysis.
RESULTS: The osteocalcin (OC) and vascular endothelium growth factor (VEGF) proteins had moderate expression in the SHRL ACQ subgroup. The same subgroup also had the highest implant removal torque. Regarding microarchitectural characteristics, a greater number of trabeculae was noted in the control animals that were treated with losartan. In the bone mineralization activity, it was observed that the Acqua™ surface triggered higher values of MAR (mineral apposition rate) in the COA, COL, and SHRL groups (p<0.05).
CONCLUSIONS: the two implant surface types showed similar responses regarding the characteristics of the peri-implant bone tissue, even though the ACQ surface seems to improve the early stages of osseointegration.