Fluorescent polyurethane has been widely used as fluorescent probes and switches due to its diverse structure and properties, but most of them are solvent-based and synthesized from petroleum-based products. A new type of rosin-based anthraquinone fluorescent waterborne polyurethane (WPU-DAAQ) with good and stable fluorescence properties was synthesized by reacting rosin modified ester (RAG) as a diol and 2, 6-diaminoanthraquinone (DAAQ) as a fluorescent agent with diisocyanate. The structure of WPU-DAAQ was characterized by Fourier transform infrared spectroscopy, UV-vis absorption spectroscopy, and hydrogen magnetic resonance spectroscopy. The fluorescence properties, water resistance, and solvent resistance of WPU-DAAQ were tested. The results showed that DAAQ was successfully grafted onto the polyurethane molecular chain. The fluorescence intensity of WPU-DAAQ increases and then decreases with increasing excitation wavelengths, and increases with the increase of solvent ether content, and is significantly enhanced compared to DAAQ. The dispersion stability was good with the increase of DAAQ. The introduction of DAAQ into polyurethane improved the thermal stability, hydrophobicity, and solvent resistance of WPU-DAAQ. Therefore, WPU-DAAQ is a new type of fluorescent waterborne polyurethane with stable dispersion properties, good fluorescent properties, heat resistance and water resistance.

Emulsion-based delivery systems are extensively employed for encapsulating functional active ingredients, protecting them from degradation, and enhancing bioavailability and release efficiency. Here, a CO2-responsive surfactant synthesized from rosin displays rapid responsiveness to CO2 at room temperature, transitioning reversibly switches between active and inactive states multiple times. The dual tertiary amines on the rosin rigid structure contributes to its CO2 sensitivity. When in its active cationic form, in conjunction with silica nanoparticles, it exhibits desired Pickering emulsification performance across various oil phases. In the Pickering emulsion loaded with quercetin, the encapsulation efficiency and loading efficiency reached 80.50% and 0.69%, respectively, with stability lasting at least 30 days. The system provides robust protection for quercetin against external factors, such as UV and heat, revealing sustained release effects. This study investigated the potential of using rosin-based CO2-responsive surfactants alongside nanoparticles to design stable Pickering emulsion systems for active substance encapsulation and sustained release.

Rosin, a natural resin obtained from conifer trees, has a long history of use in traditional folk medicine for treating abscesses, wounds, carbuncles, and burns, etc. It has been employed in ancient Egypt, China, Nordic countries, and Turkey as a therapeutic remedy. This comprehensive review examines the traditional uses, phytochemistry, and pharmacology of rosin, and it provides a critical update on current knowledge of rosin and identifies potential therapeutic opportunities. The chemical composition of rosin is known to vary depending on factors such as botanical sources, geographical locations, and processing methods. Rosin acids, which account for over 90% of its primary chemical constituents, have been identified as the predominant compounds in rosin. Researchers have isolated approximately 50 compounds from rosin, with terpenoid rosin acids being the most prevalent. Furthermore, the review highlights the potential pharmacological activities of rosin and its constituents. Crude extracts and isolated rosin acids have demonstrated promising properties, including antimicrobial, anti-inflammatory, anti-tumor, insecticidal, wound healing, and anti-obesity effects. However, the review emphasizes that further research is needed, as existing studies are predominantly preliminary. Many of the reported bioactivities require further verification, and the underlying mechanisms of action remain largely unexplored. In conclusion, rosin has been extensively used in traditional medicine across different cultures, and its chemical composition has been confirmed to a significant extent. The pharmacological activities observed in crude extracts and isolated rosin acids support its traditional uses. Nevertheless, additional research is necessary to deepen our understanding of the pharmacological mechanisms underlying its effects.

In this paper, molecules with AIE red light properties were designed by coupling dehydroabietic acid diarylamine and 2,3-diphenylfumaronitrile, which were designated 2DTPA-CN and 2TPA-CN. The emission wavelengths were 683 nm and 701 nm, respectively. The 2DTPA-CN and 2TPA-CN showed typical AIE characteristics with large Stokes shifts of 7.4 × 104 cm-1 and 6.7 × 104 cm-1, respectively. The obvious solvatochromism and electron cloud distributions of HOMO/LUMO in the ground and excited states both reveal the intramolecular charge transfer (ICT) effect. The 2DTPA-CN, boasting exceptional biocompatibility, was successfully prepared into nanoparticles (NPs), which were applied to tumor cell imaging, showing good bioimaging effects both in vitro imaging in live cells and in vivo imaging in live mice. The results demonstrated that it possesses significant potential as an effective bioimaging reagent for the detection of tumor cells. Furthermore, the incorporation of 2,3-diphenylfumaronitrile moieties to dehydroabietic acid diarylamine emerged as a proficient approach to broaden the emission wavelengths of rosin-based fluorescent materials.

BACKGROUND: To further develop potential natural fungicides, two series of new acrylopimaric acid triazole derivatives were synthesized, and their antifungal activities were tested and evaluated.
RESULTS: In vitro antifungal activity results indicated that compound 5m exhibited significant inhibitory activity against Rhizoctonia solani with an half maximal effective concentration (EC50) value of 1.528 mg/L. Its antifungal effect was comparable to that of the commercially available fungicide fluconazole, epoxiconazole and propiconazole (EC50 values of 1.441, 0.815 and 1.173 mg/L). Subsequently, in vivo studies were conducted on compound 5m, which revealed its significant protective and curative effects against R. solani. In addition, physiological and biochemical studies showed that compound 5m could disrupt the morphology and ultrastructure of R. solani mycelium, increase cell membrane permeability, inhibit ergosterol synthesis, and enhance the activity of defense enzymes in rice plants. Three-dimensional quantitative structure-activity relationship (3D-QSAR) studies revealed that the molecular structure significantly influenced the binding of compound 5m to the receptor, thereby enhancing its antifungal activity.
CONCLUSIONS: Compound 5m exhibits excellent antifungal activity against R. solani, making it a promising candidate fungicide for the prevention and control of R. solani. © 2024 Society of Chemical Industry.

Rosin-based chromatographic columns are widely used for separation purposes, but, to date, their phase ratios (Φ) have been imprecisely measured. This affects the understanding of their separation mechanism and the calculation of related thermodynamic parameters. In this study, a stationary phase was synthesized by bonding dehydroabietic acid (DA) to silica gel (Si-DO) and applied for reversed-phase liquid chromatography. The distribution coefficient (Kdm) of methyl dehydroabietate (MD), which has the same structure as the bonded phase of Si-DO, was used as a surrogate for the determination of the equilibrium coefficient (K) of Si-DO, and the Kdm values of MD in different mobile phases were measured and compared with the K values of Si-DO. It was found that the phase ratio of Si-DO varied with mobile phase composition and temperature, as shown by the Φ values: 0.039-0.122 for the methanol/water system and 0.051-0.116 for the acetonitrile/water system; in addition, the a indices were 0.552-0.757 and 0.564-0.674, respectively. The Kdm of MD was closer to the K of Si-DO than those of other surrogate models, including the octanol-water and octane-mobile phase partition coefficients. In addition, the thermodynamic parameters (ΔG°, ΔH°, and ΔS°) of n-alkylbenzenes on Si-DO were negative, indicating a spontaneous and enthalpy-driven separation process. Overall, the phase ratio of rosin-based columns is crucial for accurate thermodynamic analysis and interpretation of the separation mechanism. Finally, the MD surrogate model allows the estimation of phase ratio of Si-DO and other similar columns, providing a novel method for measuring the phase ratio of rosin-based columns and providing a validated concept and methodology for determining the phase ratios of HPLC columns.

To develop new antioomycete agents against plant pathogens, two series of acrylopimaric acid triazole derivatives from rosin were synthesized. The in vitro antioomycete activity of these derivatives was evaluated and screened against Pseudoperonospora cubensisi, Plasmopara viticola, Phytophthora sojae, Phytophthora infestans, and Phytophthora capsici. Compound 5m showed the highest antioomycete activity against P. capsici, with a half-maximal effective concentration (EC50) value that was lower than that of the positive control metalaxyl (1.391 and 1.815 mg/L, respectively). Compound 5m demonstrated satisfactory protective and curative efficacy against P. capsici in pepper in in vivo antioomycete activity studies. Physiological and biochemical testing showed that the action mechanism of compound 5m on P. capsici involved altering the morphology and ultrastructure of the mycelium, increasing cell membrane permeability, inducing dysfunction of the nucleus and mitochondria, and ultimately causing cell necrosis. In addition, the analysis of three-dimensional quantitative structure-activity relationship (3D-QSAR) revealed the significance of the molecular structure and charge distribution in the interaction between compound 5m and its target. Collectively, these findings indicate that compound 5m has the potential as an antioomycete candidate.

This study aims to reveal the effects of flexible chain lengths on rosin-based epoxy resin\'s properties. Two rosin-based epoxy monomers with varying chain lengths were synthesized: AR-EGDE (derived from ethylene glycol diglycidyl ether-modified acrylic acid rosin) and ARE (derived from acrylic acid rosin and epichlorohydrin). Diethylenetriamine (DETA), triethylenetetramine (TETA), and tetraethylenepentamine (TEPA) with different flexible chain lengths were used as curing agents. The adhesion, impact, pencil hardness, flexibility, water and heat resistance, and weatherability of the epoxy resins were systematically examined. It was found that when the flexible chains of rosin-based epoxy monomers were grown from ARE to AR-EGDE, due to the increased space of rosin-based fused rings, the toughness, adhesion, and water resistance of the rosin-based epoxy resins were enhanced, while the pencil hardness and heat resistance decreased. However, when the flexible chains of curing agents were lengthened, the resin\'s performance did not change significantly because the space between the fused rings changed little. This indicates that the properties of the rosin-based resins can only be altered when the introduced flexible chain increases the space between the fused rings. The study also compared rosin-based resins to E20, a commercial petroleum-based epoxy of the bisphenol A type. The rosin-based resins demonstrated superior adhesion, water resistance, and weatherability compared to the E20 resins, indicating the remarkable durability of the rosin-based resin.

In oral histopathology teaching and research, there is a need for high-quality undemineralized tooth sections that are easy to handle, have controlled thickness, allow the observation of intact microstructures, and can be preserved for long periods of time.
Teeth were collected under non-demineralizing conditions. Tooth sections (15-25 µm) were prepared using a diamond knife, then randomly divided into three groups: (1) stained with rosin, (2) stained with hematoxylin and eosin, or (3) not stained. The prepared tooth sections were evaluated by microscopy for clarity and microstructure visibility.
The use of a diamond knife in the sectioning and grinding process yielded high-quality ground sections of teeth. Rosin-stained ground sections allowed better identification of microstructures within the teeth, compared with unstained or hematoxylin and eosin-stained ground sections.
The best results were obtained in the ground sections of teeth that were stained with rosin. Ground sections of teeth prepared using this staining method could be useful in oral histopathology teaching and research.

Stretchable and tough polysaccharide-based functional hydrogels have gained popularity for various applications. However, it still remains a great challenge to simultaneously own satisfactory stretchability and toughness, particularly when incorporating renewable xylan to offer sustainability. Herein, we describe a novel stretchable and tough xylan-based conductive hydrogel utilizing the natural feature of rosin derivative. The effect of different compositions on the mechanical properties and the physicochemical properties of corresponding xylan-based hydrogels were systematically investigated. Owing to the multiple non-covalent interactions among different components to dissipate energies and the strain-induced orientation of rosin derivative during the stretching, the highest tensile strength, strain, and toughness of xylan-based hydrogels could reach 0.34 MPa, 2098.4 %, and 3.79 ± 0.95 MJ/m3, respectively. Furthermore, by incorporating MXene as the conductive fillers, the strength and toughness of hydrogels were further enhanced to 0.51 MPa and 5.95 ± 1.19 MJ/m3. Finally, the synthesized xylan-based hydrogels were able to serve as a reliable and sensitive strain sensor to monitor the movements of human beings. This study provides new insights to develop stretchable and tough conductive xylan-based hydrogel, especially utilizing the natural feature of bio-based resources.