Carbon black particles possess dimensions on the nanometer or sub-nanometer scale. When utilized, these particles have a tendency to aggregate, which compromises their stability under storage conditions. To address this issue, a dispersant was prepared using cotton short fibers as raw materials through etherification and graft polymerization with acrylamide (AM) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) as raw materials. The dispersant was then used to disperse carbon black to test its dispersing performance. A response surface optimization test was utilized to ascertain the influence of AMPS monomer mass, AM monomer mass, and potassium persulfate (KPS) initiator mass on the dispersibility of carbon black during dispersant preparation, and a set of optimal preparation conditions were obtained. The dispersion stability of carbon black in water was assessed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), elemental analysis (EA), thermogravimetric analysis (TG), zeta potential analysis, high magnification scanning electron microscopy (SEM), and contact angle measurements. Results revealed that the optimum mass ratio of carboxymethyl cellulose (CMC) to AMPS to AM was 1:0.69:1.67, with the KPS initiator comprising 1.56% of the total monomer mass. By incorporating the dispersant at a concentration of 37.50%, the particle size of carbon black particles was observed to decrease from 5.350 μm to 0.255 μm, and no agglomeration of carbon black particles occurred even after 3 weeks of storage.

In order to solve the problem of gas channeling during CO2 flooding in low-permeability reservoirs, a novel CO2 responsive gel channeling system was prepared by using carrageenan, branched polyethylene imide and ethylenediamine under laboratory conditions. Based on the Box-Behnken response surface design method, the optimal synthesis concentration of the system was 0.5 wt% carrageenan, 2.5 wt% branchized polyethylenimide and 6.5 wt% ethylenediamine. The micromorphology of the system before and after response was characterized by scanning electron microscopy. The rheology and dehydration rate were tested under different conditions. The channeling performance and enhanced oil recovery effect of the gel system were simulated by a core displacement experiment. The experimental results show that the internal structure of the system changes from a disordered, smooth and loosely separated lamellae structure to a more uniform, complete and orderly three-dimensional network structure after exposure to CO2. The viscosity of the system was similar to aqueous solution before contact with CO2 and showed viscoelastic solid properties after contact with CO2. The experiment employing dehydration rates at different temperatures showed that the internal structure of the gel would change at a high temperature, but the gel system had a certain self-healing ability. The results of the displacement experiment show that the plugging rate of the gel system is stable at 85.32% after CO2 contact, and the recovery rate is increased by 17.06%, which provides an important guide for the development of low-permeability reservoirs.

Discharging wastewater from industrial dyeing and printing processes poses a significant environmental threat, necessitating green and efficient adsorbents. Cellulose nanocrystals (CNCs) have emerged as a promising option for dye adsorbing. However, the industrial production and commercialization of CNCs still faced low yield, time-consuming, and uneco-friendly. In this study, we proposed a facile hydrochloric/maleic acid (HCl/C4H4O4) hydrolysis method to synthesize carboxylated CNCs using Box-Behnken design and dual response surface design, which can systematically investigate the effect of experimental factors (temperature, time and HCl/C4H4O volume ratio) on the final products. The rod-liked carboxylated CNCs gave the highest yield of 90.50 %, maximum carboxyl content of 1.29 mmol/g, and efficient dye removal ratio of 91.5 %. Furthermore, compared to CNCs obtained by commonly sulfuric acid hydrolysis way (CNCs-S) with a Tmax of 242.6 °C, the CNCs extracted at 5 h exhibited significantly improved thermal stability with Tmax reaching 351.2 °C. The enriched carboxyl content and excellent thermal stability show potential wastewater treatment applications under harsh conditions.

Orange juice is a highly nutritious beverage. Traditional pasteurization methods cause nutrient loss and taste changes. Plasma treatment (PT) is an emerging method with a high sterilization rate. This study investigated the effects of corona discharge plasma on the sterilization of orange juice by changes in color difference, total phenol content, and pH value. Single-factor experiments revealed that higher voltage (40 kV) and longer sterilization time (25 min) had better sterilization effects. Response surface analysis indicated that frequency had the greatest impact on sterilization rates, and the optimal sterilization conditions were a voltage of 44.75 kV, a frequency of 9.46 kHz, and a sterilization time of 25 min. Under these conditions, the sterilization rate reached 97.9%, meeting the national standard of 104 colony-forming units/mL (GB7101-2022). Compared to untreated juices, the color difference value was 16.32, the pH value decreased by 0.12, and the total phenol content increased by 0.669 mg/mL. However, the evaporation of water plays an important role in increasing the total phenol co. Moreover, the comparative analysis showed that PT was comparable to pasteurization in terms of sterilization effects, flavor preservation, and the concentration of bioactive components. This study provides a theoretical basis for industrial applications of PT.

Recombinant human acidic fibroblast growth factor (rh-aFGF) is a widely used biological product, but it is unstable and its biological activity is easy to decrease. In order to maintain the long-term stability and biological activity of rh-aFGF, based on the response surface method, the freeze-drying characterization and cell proliferation rate of rh-aFGF freeze-dried powder were evaluated by scoring and Methylthiazolyldiphenyl-tetrazolium bromide (MTT) assay in this study. The optimal concentrations of trehalose, glycine and BSA were optimized, and the optimal formulation was verified by regression experiment. The results showed that trehalose, glycine and BSA had significant effects on the characterization of lyophilized rh-aFGF and cell proliferation. The optimal formulation of 5.7% trehalose, 2.04% glycine and 1.98%BSA combined with rh-aFGF could achieve the optimal freeze-dried characterization and biological activity. Using the best formulation to verify, the freeze-dried formability index of the freeze-dried powder was 23.35, and the rate of cell proliferation was 43.59%, which was close to the expected 23 and 41.69%. This study determined a freeze-dried formulation of rh-aFGF that meets the requirements of freeze-dried formalization integrity and maintains biological activity, providing reliable support for the subsequent development of related drugs.

In this study, a combination of Serratia nematophila L2 and Bacillus velezensis W24 was used to biocontrol Sclerotinia sclerotiorum. When the mixed ratio of L2 to W24 was 1:1, the inhibition rate on the growth of S. sclerotiorum was 88.1 %. To gain a large number of bacteria, the culture medium and conditions were optimized. When the medium formula involved molasses (8.890 g/L), soy peptone (6.826 g/L), and NaCl (6.865 g/L), and the culture conditions were 32 °C, inoculum 4%, rotation speed 200 rpm, and pH 7, the maximum amounts of bacterial cells obtained. In order to prepare microcapsules, spray drying conditions were optimized. These conditions included the soluble starch concentration of 30 g/100 mL, the inlet air temperature of 160 °C, and the feed flow rate of 450 mL/h. Under these optimized conditions to prepare microcapsules, the mixed strain (L2 and W24) exhibited a survival rate of 93.9 ± 0.9% and a viable bacterial count of 6.4 × 1012 cfu/g. In addition, microcapsules (GW24Ms) which contained strains L2 and W24 had good storage stability. In the pot experiment, GW24Ms could effectively reduce the disease of soybean plants and the control effect was 88.4%. Thus, the microbial agent represents a promising biocontrol solution for managing Sclerotinia in soybean.

BACKGROUND: Ancient classic prescription play a crucial role in the preservation and advancement of traditional Chinese medicine (TCM) theories. They represent a significant milestone in the ongoing development and transmission of TCM knowledge and practices and are considered one of the breakthroughs in the development of TCM inheritance. In the process of developing ancient classic prescriptions, many problems may still arise in ensuring quality consistency between traditional methods and modern production processes, among which the extraction process poses major challenges. This paper introduces a practical approach extracting an ancient classic prescription using a modern extraction process. The technique is demonstrated through the study of the extraction process of Shenshou Taiyi powder (STP).
METHODS: This study focuses on optimising the STP extraction process to ensure consistency in the quality of the product obtained through ancient and modern processes using the standard relation and fuzzy analytic hierarchical process (FAHP) and criteria importance through intercriteria correlation (CRITIC) method integrated weights combined with the Box-Behnken response surface test. Using the contents of rosmarinic acid, isoimperatorin, puerarin, as well as the extract yield and fingerprint similarity as evaluation indexes of STP, the Box-Behnken response surface method was employed to examine the varying extraction parameters, including water addition ratio, extraction duration, and number of extractions. The weighted coefficients for each parameter were calculated by combining the benchmark correlation and FAHP-CRITIC method, deriving a comprehensive score.
RESULTS: The optimal extraction process for STP consisted of a two extractions, each using at a tenfold quantity of water, performed for one hour. Process verification across three separate batches yielded a comprehensive score of 94.7, with a relative standard deviation of 0.76%.
CONCLUSIONS: The application of the Box-Behnken response surface method combined with standard relation and FAHP-CRITIC approach proved to be stable and feasible for optimising the extraction process of STP.

The ultrasonic-assisted deep eutectic solvent method was used to extract the polysaccharides of Pericarpium Citri Reticulatae (PCRP), and the ultrasound-assisted DES extraction process was optimized by Box-Behnken response surface test using the extraction rate of the PCRP as an index; the in vitro activities of purified the PCRP(PCRPs-1) were investigated by determining the scavenging rate of DPPH• and ABTS•+ as well as by enzyme inhibition assay. The monosaccharide composition was analyzed by HPLC. The best process conditions for response surface optimization were a material-liquid ratio of 1:37 g/mL, water content of 44%, time of 89 min, and power of 320 W. The polysaccharide extraction rate was measured to be 5.41%, which was well optimized when compared with that of the ordinary aqueous extraction method of 3.92%. By α-glucosidase and α-amylase inhibition activity test, it showed that the PCRPs-1 had hypoglycemic activity. The DPPH radical scavenging activity test and ABTS + scavenging activity test indicated that the PCRPs-1 had good biological activity. Analysis of the monosaccharide fractions showed that the PCRPs-1 consisted of mannose, rhamnose, glucuronic acid, galacturonic acid, glucose, galactose, xylose, and arabinose, with molar ratios of 1:39.24:4.41:8.91:7.83:86.00:1.02:9.17. The activity studies showed that PCRPs-1 possessed certain hypoglycaemic and antioxidant activities.

The application of plant essential oils in the food industry is often hindered by their poor water solubility and high volatilize. Encapsulation has emerged as an effective solution to this problem. This study focuses on the preparation of Fructus Ligustri Lucidi essential oil gel spheres (FEOH) based sodium alginate and gelatin. The optimum formulation for FEOH was established by Box-Behnken Design response surface testing, resulting in a composition of 10 % FEO, 5 % TW20 and 2 % CaCl2. This formulation achieved an encapsulation efficiency of 85.56 %. FTIR and SEM results indicated the successful encapsulation of FEO within the gel spheres. Furthermore, DSC and TGA results showed that encapsulation enhanced the thermal stability of the essential oil. At room temperature, the water content of FEOH exceeded 90 %, and it showed the highest swelling ratio of 62.5 % in an alkaline medium at different pH conditions. The in vitro release behavior showed that FEOH was released up to 85.28 % in oil-based food simulants within 2 h. FEOH showed strong antibacterial activity, with a Minimum Inhibitory Concentration (MIC) of 128 mg/mL against Staphylococcus aureus and 256 mg/mL against Escherichia coli. The gel spheres obtained in this research show significant potential as food preservatives in food matrices.

Schizochytrium sp. hasreceived much attention for itsability to synthesize and accumulate high-level docosahexaenoic acid (DHA), which can reach nearly 40 % of total fatty acids. In this study, the titer of DHA in Schizochytrium sp. was successfully improved by enhancing DHA storage through overexpressing the diacylglycerol acyltransferase (ScDGAT2C) gene, as well as optimizing the supply of precursors and cofactors required for DHA synthesis by response surface methodology. Notably, malic acid, citric acid, and biotin showed synergistic and time-dependent effects on DHA accumulation. The maximum lipid and DHA titers of the engineered Schizochytrium sp. strain reached 84.28 ± 1.02 g/L and 42.23 ± 0.69 g/L, respectively, with the optimal concentration combination (1.62 g/L malic acid + 0.37 g/L citric acid + 8.28 mg/L biotin) were added 48 h after inoculation. This study provides an effective strategy for improving lipid and DHA production in Schizochytrium sp.