Cleavage Under Targets and Tagmentation (CUT&Tag) is a recent methodology used for robust epigenomic profiling that, unlike conventional chromatin immunoprecipitation (ChIP-Seq), requires only a limited amount of cells as starting material. RNA sequencing (RNA-Seq) reveals the presence and quantity of RNA in a biological sample, describing the continuously changing cellular transcriptome. The integrated analysis of transcriptional activity, histone modifications, and chromatin accessibility via CUT&Tag is still in its infancy compared to the well-established ChIP-Seq. This chapter describes a robust bioinformatics methodology and workflow to perform an integrative CUT&Tag/RNA-Seq analysis.

Chromatin immunoprecipitation (ChIP) followed by next-generation sequencing (-seq) has been the most common genomics method for studying DNA-protein interactions in the last decade. ChIP-seq technology became standard both experimentally and computationally. This chapter presents a core workflow that covers data processing and initial analytical steps of ChIP-seq data. We provide a step-by-step protocol of the commands as well as a fully assembled Snakemake workflow. Along the protocol, we discuss key tool parameters, quality control, output reports, and preliminary results.

Application of stable isotopically labelled (SIL) molecules in Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry Imaging (MALDI-MSI) over a series of time points allows the temporal and spatial dynamics of biochemical reactions to be tracked in a biological system. However, these large kinetic MSI datasets and the inherent variability of biological replicates presents significant challenges to the rapid analysis of the data. In addition, manual annotation of downstream SIL metabolites involves human input to carefully analyse the data based on prior knowledge and personal expertise. To overcome these challenges to the analysis of spatiotemporal MALDI-MSI data and improve the efficiency of SIL metabolite identification, a bioinformatics pipeline has been developed and demonstrated by analysing normal bovine lens glucose metabolism as a model system. The pipeline consists of spatial alignment to mitigate the impact of sample variability and ensure spatial comparability of the temporal data, dimensionality reduction to rapidly map regional metabolic distinctions within the tissue, and metabolite annotation coupled with pathway enrichment modules to summarise and display the metabolic pathways induced by the treatment. This pipeline will be valuable for the spatial metabolomics community to analyse kinetic MALDI-MSI datasets, enabling rapid characterisation of spatio-temporal metabolic patterns from tissues of interest.

Understanding fungal lipid biology and metabolism is critical for antifungal target discovery as lipids play central roles in cellular processes. Nuances in lipid structural differences can significantly impact their functions, making it necessary to characterize lipids in detail to understand their roles in these complex systems. In particular, lipid double bond (DB) locations are an important component of lipid structure that can only be determined using a few specialized analytical techniques. Ozone-induced dissociation mass spectrometry (OzID-MS) is one such technique that uses ozone to break lipid DBs, producing pairs of characteristic fragments that allow the determination of DB positions. In this work, we apply OzID-MS and LipidOz software to analyze the complex lipids of Saccharomyces cerevisiae yeast strains transformed with different fatty acid desaturases from Histoplasma capsulatum to determine the specific unsaturated lipids produced. The automated data analysis in LipidOz made the determination of DB positions from this large dataset more practical, but manual verification for all targets was still time-consuming. The DL model reduces manual involvement in data analysis, but since it was trained using mammalian lipid extracts, the prediction accuracy on yeast-derived data was reduced. We addressed both shortcomings by retraining the DL model to act as a pre-filter to prioritize targets for automated analysis, providing confident manually verified results but requiring less computational time and manual effort. Our workflow resulted in the determination of detailed DB positions and enzymatic specificity.

Background/Objectives: The rising prevalence of musculoskeletal (MSK) conditions has not been balanced by a sufficient increase in healthcare providers. Scalability challenges are being addressed through the use of artificial intelligence (AI) in some healthcare sectors, with this showing potential to also improve MSK care. Digital care programs (DCP) generate automatically collected data, thus making them ideal candidates for AI implementation into workflows, with the potential to unlock care scalability. In this study, we aimed to assess the impact of scaling care through AI in patient outcomes, engagement, satisfaction, and adverse events. Methods: Post hoc analysis of a prospective, pre-post cohort study assessing the impact on outcomes after a 2.3-fold increase in PT-to-patient ratio, supported by the implementation of a machine learning-based tool to assist physical therapists (PTs) in patient care management. The intervention group (IG) consisted of a DCP supported by an AI tool, while the comparison group (CG) consisted of the DCP alone. The primary outcome concerned the pain response rate (reaching a minimal clinically important change of 30%). Other outcomes included mental health, program engagement, satisfaction, and the adverse event rate. Results: Similar improvements in pain response were observed, regardless of the group (response rate: 64% vs. 63%; p = 0.399). Equivalent recoveries were also reported in mental health outcomes, specifically in anxiety (p = 0.928) and depression (p = 0.187). Higher completion rates were observed in the IG (79.9% (N = 19,252) vs. CG 70.1% (N = 8489); p < 0.001). Patient engagement remained consistent in both groups, as well as high satisfaction (IG: 8.76/10, SD 1.75 vs. CG: 8.60/10, SD 1.76; p = 0.021). Intervention-related adverse events were rare and even across groups (IG: 0.58% and CG 0.69%; p = 0.231). Conclusions: The study underscores the potential of scaling MSK care that is supported by AI without compromising patient outcomes, despite the increase in PT-to-patient ratios.

BACKGROUND: Genome assembly, which involves reconstructing a target genome, relies on scaffolding methods to organize and link partially assembled fragments. The rapid evolution of long read sequencing technologies toward more accurate long reads, coupled with the continued use of short read technologies, has created a unique need for hybrid assembly workflows. The construction of accurate genomic scaffolds in hybrid workflows is complicated due to scale, sequencing technology diversity (e.g., short vs. long reads, contigs or partial assemblies), and repetitive regions within a target genome.
RESULTS: In this paper, we present a new parallel workflow for hybrid genome scaffolding that would allow combining pre-constructed partial assemblies with newly sequenced long reads toward an improved assembly. More specifically, the workflow, called Maptcha, is aimed at generating long scaffolds of a target genome, from two sets of input sequences-an already constructed partial assembly of contigs, and a set of newly sequenced long reads. Our scaffolding approach internally uses an alignment-free mapping step to build a ⟨ contig,contig ⟩ graph using long reads as linking information. Subsequently, this graph is used to generate scaffolds. We present and evaluate a graph-theoretic \"wiring\" heuristic to perform this scaffolding step. To enable efficient workload management in a parallel setting, we use a batching technique that partitions the scaffolding tasks so that the more expensive alignment-based assembly step at the end can be efficiently parallelized. This step also allows the use of any standalone assembler for generating the final scaffolds.
CONCLUSIONS: Our experiments with Maptcha on a variety of input genomes, and comparison against two state-of-the-art hybrid scaffolders demonstrate that Maptcha is able to generate longer and more accurate scaffolds substantially faster. In almost all cases, the scaffolds produced by Maptcha are at least an order of magnitude longer (in some cases two orders) than the scaffolds produced by state-of-the-art tools. Maptcha runs significantly faster too, reducing time-to-solution from hours to minutes for most input cases. We also performed a coverage experiment by varying the sequencing coverage depth for long reads, which demonstrated the potential of Maptcha to generate significantly longer scaffolds in low coverage settings ( 1 × - 10 × ).

BACKGROUND: Dual-person inspection in IVF laboratories cannot fully avoid mix-ups or embryo transfer errors, and data transcription or entry is time-consuming and redundant, often leading to delays in completing medical records.
METHODS: This study introduced a workflow-based RFID tag witnessing and real-time information entry platform for addressing these challenges. To assess its potential in reducing mix-ups, we conducted a simulation experiment in semen preparation to analyze its error correction rate. Additionally, we evaluated its impact on work efficiency, specifically in operation and data entry. Furthermore, we compared the cycle costs between paper labels and RFID tags. Finally, we retrospectively analyzed clinical outcomes of 20,424 oocyte retrieval cycles and 15,785 frozen embryo transfer cycles, which were divided into paper label and RFID tag groups.
RESULTS: The study revealed that comparing to paper labels, RFID tag witnessing corrected 100% of tag errors, didn\'t affect gamete/embryo operations, and notably shorten the time of entering data, but the cycle cost of RFID tags was significantly higher. However, no significant differences were observed in fertilization, embryo quality, blastocyst rates, clinical pregnancy, and live birth rates between two groups.
CONCLUSIONS: RFID tag witnessing doesn\'t negatively impact gamete/embryo operation, embryo quality and pregnancy outcomes, but it potentially reduces the risk of mix-ups or errors. Despite highly increased cost, integrating RFID tag witnessing with real-time information entry can remarkably decrease the data entry time, substantially improving the work efficiency. This workflow-based management platform also enhances operational safety, ensures medical informational integrity, and boosts embryologist\'s confidence.

We recently revealed significant variability in protein corona characterization across various proteomics facilities, indicating that data sets are not comparable between independent studies. This heterogeneity mainly arises from differences in sample preparation protocols, mass spectrometry workflows, and raw data processing. To address this issue, we developed standardized protocols and unified sample preparation workflows, distributing uniform protein corona digests to several top-performing proteomics centers from our previous study. We also examined the influence of using similar mass spectrometry instruments on data homogeneity and standardized database search parameters and data processing workflows. Our findings reveal a remarkable stepwise improvement in protein corona data uniformity, increasing overlaps in protein identification from 11% to 40% across facilities using similar instruments and through a uniform database search. We identify the key parameters behind data heterogeneity and provide recommendations for designing experiments. Our findings should significantly advance the robustness of protein corona analysis for diagnostic and therapeutics applications.

The increasing recognition of the health impacts from human exposure to per- and polyfluorinated alkyl substances (PFAS) has surged the need for sophisticated analytical techniques and advanced data analyses, especially for assessing exposure by food of animal origin. Despite the existence of nearly 15,000 PFAS listed in the CompTox chemicals dashboard by the US Environmental Protection Agency, conventional monitoring and suspect screening methods often fall short, covering only a fraction of these substances. This study introduces an innovative automated data processing workflow, named PFlow, for identifying PFAS in environmental samples using direct infusion Fourier transform ion cyclotron resonance mass spectrometry (DI-FT-ICR MS). PFlow\'s validation on a bream liver sample, representative of low-concentration biota, involves data pre-processing, annotation of PFAS based on their precursor masses, and verification through isotopologues. Notably, PFlow annotated 17 PFAS absent in the comprehensive targeted approach and tentatively identified an additional 53 compounds, thereby demonstrating its efficiency in enhancing PFAS detection coverage. From an initial dataset of 30,332 distinct m/z values, PFlow thoroughly narrowed down the candidates to 84 potential PFAS compounds, utilizing precise mass measurements and chemical logic criteria, underscoring its potential in advancing our understanding of PFAS prevalence and of human exposure.

In vitro assessments for the prediction of pharmacokinetic (PK) behavior of biotherapeutics can help identify corresponding liabilities significantly earlier in the discovery timeline. This can minimize the need for extensive early in vivo PK characterization, thereby reducing animal usage and optimizing resources. In this study, we recommend bolstering classical developability workflows with in vitro measures correlated with PK. In agreement with current literature, in vitro measures assessing nonspecific interactions, self-interaction, and FcRn interaction are demonstrated to have the highest correlations to clearance in hFcRn Tg32 mice. Crucially, the dataset used in this study has broad sequence diversity and a range of physicochemical properties, adding robustness to our recommendations. Finally, we demonstrate a computational approach that combines multiple in vitro measurements with a multivariate regression model to improve the correlation to PK compared to any individual assessment. Our work demonstrates that a judicious choice of high throughput in vitro measurements and computational predictions enables the prioritization of candidate molecules with desired PK properties.