In our research we explore the world of PACDs, carbon dots synthesized from pamoic acid through a single step pyrolysis method. Our findings reveal that PACDs have capabilities of serving as sensitive and selective sensors in both colorimetric and fluorescent modes. They are particularly effective, at colorimetrically and fluorometrically detecting ferric ions and can also act as fluorometric sensors for pH. When ferric ions are introduced an interesting transformation occurs. A noticeable change in color unfolds before our eyes, under 365 nm UV light the fluorescence shifts from green to blue while in daylight it changes from a yellow to a deep ink blue. Notably these detection techniques can precisely measure ferric ions within concentrations ranging from 5 µM to 80 µM with a detection limit of 0.1 µM for fluorescence response. Additionally, they can detect ferric ions colorimetrically within the range of 5 µM to 45 µM with a detection limit of 3.8 µM. Furthermore, the PACDs exhibit a capability to adapt to different pH levels. In alkaline environments with a pH range between 8 and 11 the fluorescence signal demonstrates a response that directly correlates with pH levels and slightly shifts its position. In contrast under acidic conditions a noticeable shift, towards blue is observed in the fluorescence signal leading to a change in color from green to blue when exposed to UV light. This shift persists as the fluorescence signal directly correlates with decreasing pH levels in settings. Apart from their proficiency in ferric ion detection and pH monitoring, the PACDs also demonstrate potential in cancer research. Through an assessment using the MTT assay it was discovered that the PACDs exhibit cytotoxic effects against five different cancer cell lines; HCT 116, MDA MB 231, Hep3B, MCF 7 and HeLa. The findings are promising as the PACDs show IC50 values of 12.5 µg/ml 6.25 µg/ml 25 µg/ml 50 µg/ml and 100 µg/ml for these cell lines. This research highlights the versatility and potential of PACDs as a tool, in both sensing applications and oncology research.

Two new Schiff bases, TIC ((E)-N\'-(2-hydroxybenzylidene)-5-(thiophene-2-yl)isoxazole-3-carbohydrazide) and TIE ((E)-N\'-(3-ethoxy-2-hydroxybenzylidene)-5-(thiophene-2-yl)isoxazole-3-carbohydrazide), have been designed and synthesized as chemosensors for distinct recognition of Ga3+ and Fe3+ ions. TIE demonstrated a prominent \"turn on\" response characterized by clear distinguished fluorescence when coordination with Ga3+ ions in the DMSO/H2O buffer solution. In comparison, TIC also showed \"turn on\" response of blue fluorescence which was more selective and sensitive than that of TIE due to the steric hindrance of ethoxy group of TIE. The newly formed complexes TIC-Ga3+ and TIE-Ga3+ may act as selective \"turn-off\" fluorescent probes towards Fe3+ ions. Limits of detection of TIC and TIE towards Ga3+ ions were 7.8809 × 10-9 M and 2.6277 × 10-8 M, respectively. Limits of detection of TIC-Ga3+ and TIE-Ga3+ towards Fe3+ ions were 8.6562 × 10-9 M and 3.3764 × 10-7 M, respectively. The molar ratio of the complex between the sensor and Ga3+ or Fe3+ ions were all 1:2 determined through Job\'s Plot, mass spectrometry, and theoretical calculations. Both sensors were utilized for the determination of target ions in environment water samples, and the portable paper sensors for detecting Ga3+ ions have been successfully developed.

Iron is an essential element that plays critical roles in many biological/metabolic processes, ranging from oxygen transport, mitochondrial respiration, to host defense and cell signaling. Maintaining an appropriate iron level in the body is vital to the human health. Iron deficiency or overload can cause life-threatening conditions. Thus, developing a new, rapid, cost-effective, and easy to use method for iron detection is significant not only for environmental monitoring but also for disease prevention. In this study, we report an innovative Fe3+ detection strategy by using both a ligand probe and an engineered nanopore with two binding sites. In our design, one binding site of the nanopore has a strong interaction with the ligand probe, while the other is more selective toward interfering species. Based on the difference in the number of ligand DTPMPA events in the absence and presence of ferric ions, micromolar concentrations of Fe3+ could be detected within minutes. Our method is selective: micromolar concentrations of Mg2+, Ca2+, Cd2+, Zn2+, Ni2+, Co2+, Mn2+, and Cu2+ would not interfere with the detection of ferric ions. Furthermore, Cu2+, Ni2+, Co2+, Zn2+, and Mn2+ produced current blockage events with quite different signatures from each other, enabling their simultaneous detection. In addition, simulated water and serum samples were successfully analyzed. The nanopore sensing strategy developed in this work should find useful application in the development of stochastic sensors for other substances, especially in situations where multi-analyte concurrent detection is desired.

Chiral nematic materials have been attracting attention in fields of advanced functional applications due to their unique iridescent colors and tunable helical structure. A precisely decreased pitch is of importance for construction and applications of chiral nematic materials; however, it remains a huge challenge. Herein, cellulose nanocrystal (CNC) is selected as a constructed matrix for chiral nematic films, and ferric chloride (FeCl3) is used as a modification agent. We investigate the effects of the ferric ion loads on the helical structure and optical characteristics of iridescent film. Subsequently, the influence of ferric ions on the assembly process of CNC liquid crystal and the regulation of the structure color of self-assembled monolayers are discussed. Therefore, the CNC/FeCl3 chiral nematic films showed a blueshifted structural color from orange to blue, which highlights a simple route to achieve the regulation of decreased pitch. Further, we have applied this CNC/FeCl3 chiral nematic film for benzene gas detection. The sensing performance shows that the CNC/FeCl3 chiral nematic film reacts to benzene gas, which can be merged into the nematic layer of the CNC and trigger the iron ions chelated on the CNC, consequently arousing the redshift of the reflected wavelength and the effective colorimetric transition. This CNC/FeCl3 chiral nematic film is anticipated to boost a new gas sensing mechanism for faster and more effective in-situ qualitative investigations.

Considering the diversity of tumors, it is of great significance to develop a simple, effective, and low-cost method to prepare personalized cancer vaccines.
In this study, a facile one-pot synthetic route was developed to prepare cancer vaccines using model antigen or autologous tumor antigens based on the coordination interaction between Fe3+ ions and endogenous fumarate ligands.
Herein, Fe-based metal organic framework can effectively encapsulate tumor antigens with high loading efficiency more than 80%, and act as both delivery system and adjuvants for tumor antigens. By adjusting the synthesis parameters, the obtained cancer vaccines are easily tailored from microscale rod-like morphology with lengths of about 0.8 μm (OVA-ML) to nanoscale morphology with sizes of about 50~80 nm (OVA-MS). When cocultured with antigen-presenting cells, nanoscale cancer vaccines more effectively enhance antigen uptake and Th1 cytokine secretion than microscale ones. Nanoscale cancer vaccines (OVA-MS, dLLC-MS) more effectively enhance lymph node targeting and cross-presentation of tumor antigens, mount antitumor immunity, and inhibit the growth of established tumor in tumor-bearing mice, compared with microscale cancer vaccines (OVA-ML, dLLC-ML) and free tumor antigens.
Our work paves the ways for a facile, rapid, and low-cost preparation approach for personalized cancer vaccines.

UNASSIGNED: To evaluate the effects of combined treatment with tannic acid and ferric ions on the biomechanical and anti-calcification properties of glutaraldehyde-fixed bovine jugular veins after xenografting.
UNASSIGNED: Two-point bending test and uniaxial tensile test were used to evaluate the flexural and biomechanical properties; Subcutaneous implantation in rat and right ventricular outflow tract reconstruction of sheep were used to evaluate the anti-calcification effects; The performance of the graft in sheep models was evaluated every month after the surgery with echocardiography examination. Markers of macrophages, T lymphocytes, smooth muscle cell osteogenic differentiation and matrix metalloproteinases in sheep explants were detected by immunohistochemistry.
UNASSIGNED: The flexibility of the bovine jugular veins cotreated with ferric ions-tannic acid was improved while maintaining biomechanical properties and excellent anti-calcification effects. Echocardiography results showed that the grafts functioned well in the animals without stenosis or reflux of the valve. Immunohistochemical studies showed that the osteogenic differentiation marker (Runx2) was detected in calcified regions and colocalised with the SMC marker (α-SMA). Compared to the glutaraldehyde-treated samples, T-cell marker (CD3), matrix metalloproteinase-2 and 9 expressions were reduced in the ferric ions-tannic acid treated group.
UNASSIGNED: Ferric ions-tannic acid treatment can give the conduits better flexibility with excellent biomechanical properties and anti-calcification effects, making it a promising bovine jugular veins processing method.

Interaction of antibiotics with metal ions in aquatic environments, commonly occurring to form complexes, may affect the migration, transformation and reactivity of residual antibiotics. This study demonstrates the photolysis of Fe(III) by UV irradiation at pH 3.5, as an advanced oxidation process, to produce •OH for the abatement of a common broad-spectrum antibiotic compound, tetracycline (TET). The dimethylamino (-N(CH3)2) and hydroxyl (-OH) groups of TET were determined as the binding sites for the complexation with Fe(III) via a series of novel characterization approaches. The complexation stoichiometry of Fe(III)-TET complexation, including the complexation ratio, constants and percentages, was determined via a complexometric titration based on the UV differential spectroscopy. The complexation constant was determined to be 21,240 ± 1745 L·mol-1 under the designed conditions. Complexation of TET with Fe(III) enhanced its degradation in the UV/Fe(III) process, through the promotion of the •OH generation by inhibiting hydrolysis-precipitation process of Fe(III) and enhancing Fe(III)/Fe(II) cycle and the acceleration of mass transfer between •OH and TET. This finding provides new insights into the role of complexation in the fate of residual antibiotics in the UV/Fe(III) process. The reduced overall ecotoxicity during the TET abatement, evaluated by the toxicity variation through ECOSAR program, provides the UV/Fe(III) process with a theoretical feasibility for water decontamination in actual applications.

Abnormal iron ions levels may lead to some diseases and serious environmental pollution. Herein, optical and visual detection strategies of Fe3+ in water based on co-doped carbon dots (CDs) were established in the present study. Firstly, a one-pot synthetic strategy for the preparation of the N, S, B co-doped CDs with a home microwave oven was developed. Secondly, the optical properties, chemical structures, and morphology of CDs were further characterized by fluorescence spectroscopy, Uv-vis absorption spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscope. Finally, the results indicated that the fluorescence of the co-doped CDs was quenched by ferric ions via the static mechanism and the aggregation of CDs, accompanied by the increased red color. The multi-mode sensing strategies of Fe3+ with fluorescence photometer, UV-visible spectrophotometer, portable colorimeter and smartphone had the advantages of good selectivity, excellent stability and high sensitivity. Fluorophotometry based on co-doped CDs was a powerful probe platform for measuring lower concentrations of Fe3+ due to its higher sensitivity, better linear relationship, lower limit of detection (0.27 μM) and limit of quantitation (0.91 μM). In addition, the visual detection methods with a portable colorimeter and smartphone had been proven to be very suitable for rapid and simple sensing of higher concentrations of Fe3+. Moreover, the co-doped CDs utilized for Fe3+ probes in tap water and boiler water obtained satisfactory results. Consequently, the efficient, versatile optical and visual multi-mode sensing platform could be extended to apply such a visual analysis of ferric ions in the biological, chemical and other fields.

In clinical cancer research, photothermal therapy is one of the most effective ways to increase sensitivity to chemotherapy. Here, we present a simple and effective method for developing a nanotherapeutic agent for chemotherapy combined with photothermal therapy. The nanotherapeutic agent mesoporous polydopamine-Fe(III)-doxorubicin-hyaluronic acid (MPDA-Fe(III)-DOX-HA) was composed of mesoporous polydopamine modified by ferric ions and loaded with the anticancer drug doxorubicin (DOX), as well as an outer layer coating of hyaluronic acid. The pore size of the mesoporous polydopamine was larger than that of the common polydopamine nanoparticles, and the particle size of MPDA-Fe(III)-DOX-HA nanoparticles was 179 ± 19 nm. With the presence of ferric ions, the heat generation effect of the MPDA-Fe(III)-DOX-HA nanoparticles in the near-infrared light at 808 nm was enhanced. In addition, the experimental findings revealed that the active targeting of hyaluronic acid to tumor cells mitigated the toxicity of DOX on normal cells. Furthermore, under 808 nm illumination, the MPDA-Fe(III)-DOX-HA nanoparticles demonstrated potent cytotoxicity to HCT-116 cells, indicating a good anti-tumor effect in vitro. Therefore, the system developed in this work merits further investigation as a potential nanotherapeutic platform for photothermal treatment of cancer.

A facile, economical and green strategy to prepare green-fluorescent nitrogen-doped carbon nanodots (N-CDs) with a quantum yield (QY) of approximately 31.91% has been built up, while aspartame was employed as the carbon-nitrogen source for the first time. The prepared N-CDs exhibited ultrahigh brightness, favorable strong photostability and negligible cytotoxicity. The outstanding optical properties are mainly derived from the their robost composition and steric distribution of the doped nitrogen atoms, which have been characterized detailedly. The obtained N-CDs showed highly selective and sensitive response toward ferric ions (Fe3+) through a fluorescence static quenching process in a wide linear range of 0.005-60µmol/L. The detection limit was as low as 1.43nmol/L, allowing the analysis of Fe3+ in a very simple method. The excitation-dependent luminescent behavior of the obtained N-CDs guaranteed the multicolor emissive property when they were used in cell imaging. And the application for intracellular Fe3+ sensing further verified this novel N-CDs may open more opportunities in biosensor, bioimaging and biological assay.