The paper investigates the oil-water emulsification process inside a micro-venturi channel. More specifically, the possible influence of Kelvin-Helmholtz instability on the emulsification process. High-speed visualizations were conducted inside a square venturi constriction with throat dimensions of 450 µm by 450 µm, both under visible light and X-Rays. We show that cavity shedding caused by the instability results in the formation of several cavity vortices. Their rotation causes the deformation of the oil stream into a distinct wave-like shape, combined with fragmentation into larger drops due to cavitation bubble collapse. Later on, the cavity collapse further disperses the larger drops into a finer emulsion. Thus, it turns out that the Kelvin-Helmholtz instability is similarly characteristic for hydrodynamic cavitation emulsification inside a microchannel as is the Rayleigh-Taylor instability for acoustically driven emulsion formation.

Protein emulsifiers play an important role in formulation science, from food product development to emerging applications in biotechnologies. The impact of mixed protein assemblies on surface composition and interfacial shear mechanics remains broadly unexplored, in comparison to the impact that formulation has on dilatational mechanics and surface tension or pressure. In this report, we use interfacial shear rheology to quantify the evolution of interfacial shear moduli as a function of composition in bovine serum albumin (BSA)/β-casein mixed assemblies. We present the pronounced difference in mechanics of these two protein, at oil interfaces, and observe the dominance of β-casein in regulating interfacial shear mechanics. This observation correlates well with the strong asymmetry of adsorption of these two proteins, characterised by fluorescence microscopy. Using neutron reflectometry and fluorescence recovery after photobleaching, we examine the architecture of corresponding protein assemblies and their surface diffusion, providing evidence for distinct morphologies, but surprisingly comparable diffusion profiles. Finally, we explore the impact of crosslinking and sequential protein adsorption on the interfacial shear mechanics of corresponding assemblies. Overall, this work indicates that, despite comparable surface densities, BSA and β-casein assemblies at liquid-liquid interfaces display almost 2 orders of magnitude difference in interfacial shear storage modulus and markedly different viscoelastic profiles. In addition, co-adsorption and sequential adsorption processes are found to further modulate interfacial shear mechanics. Beyond formulation science, the understanding of complex mixed protein assemblies and mechanics may have implications for the stability of emulsions and may underpin changes in the mechanical strength of corresponding interfaces, for example in tissue culture or in physiological conditions.

A classical emulsion formulation based on petrolatum and mineral oil as the internal phase with emulsifier wax as a typical topical emulsion cream was investigated for the effect of process parameters on drug product quality and performance attributes. The Initial Design of Experiment (DoE) suggested that an oil phase above 15%, coupled with less than 10% emulsifying wax, resulted in less stable emulsions. Different processing parameters such as homogenization speed, duration, cooling rate, and final temperature showed minimal influence on properties and failed to improve stability. The final DoE suggested that the optimal emulsion stability was achieved by introducing a holding period midway through the cooling stage after solvent addition. Within the studied holding temperature range (25-35 °C), a higher holding temperature correlated with increased emulsion stability. However, the application of shear during the holding period, using a paddle mixer, adversely affected stability by disrupting the emulsion microstructure. IVRT studies revealed that the release of lidocaine was higher in the most stable emulsion produced at a holding temperature of 35 °C compared to the least stable emulsion produced at a holding temperature of 25 °C. This suggests that a holding temperature of 35 °C improves both the stability and active release performance. It appears that a slightly higher holding temperature, 35 °C, allows a more flexible and stable emulsifying agent film around the droplets facilitating stabilization of the emulsion. This study offers valuable insights into the relationship between process parameters at various stages of manufacture, microstructure, and various quality attributes of emulsion cream systems. The knowledge gained will facilitate improved design and optimization of robust manufacturing processes, ensuring the production of the formulations with the desired critical quality attributes.

Skin lesions are an important health concern, exposing the body to infection risks. Utilizing natural products containing chamomile (Chamomilla recutita L.) holds promise for curative purposes. Additionally, hyaluronic acid (HA), an active ingredient known for its tissue regeneration capacity, can expedite healing. In this study, we prepared and characterized an extract of C. recutita and integrated it into a nanoemulsion system stabilized with HA, aiming at harnessing its healing potential. We assessed the impact of alcoholic strength on flavonoid extraction and chemically characterized the extract using UHPLC/MS while quantifying its antioxidant and antimicrobial capacity. We developed a nanoemulsion loaded with C. recutita extract and evaluated the effect of HA stabilization on pH, droplet size, polydispersity index (PDI), zeta potential, and viscosity. Results indicated that 70% hydroalcoholic extraction yielded a higher flavonoid content. The extract exhibited antioxidant capacity in vitro, a desirable trait for skin regeneration, and demonstrated efficacy against key microbial strains (Staphylococcus aureus, Streptococcus pyogenes, Escherichia coli, and Pseudomonas aeruginosa) associated with skin colonization and infections. Flavonoids spireoside and apiin emerged as the most abundant bioactives. The addition of HA led to increased viscosity while maintaining a suitable pH for topical application. Zeta potential, droplet size, and PDI met acceptable criteria. Moreover, incorporating C. recutita extract into the nanoemulsion enhanced its antimicrobial effect. Hence, the nanoemulsion system loaded with C. recutita and HA stabilization exhibits favorable characteristics for topical application, showing promise in aiding the healing processes.

BACKGROUND: The imbalance of skin microbiota in acne can induce changes leading to induction or to aggravation of chronic inflammatory lesions; complex mechanisms are involved. Cutibacterium acnes (C. acnes) ribotypes RT4 and RT5 express more biofilm and are associated with inflammatory acne lesions. C. acnes RT6 is a non-acne ribotype, beneficial for the skin.
OBJECTIVE: In an open clinical trial, acne adults were included and assessed clinically at baseline and at month 2 using the Investigator Global Assessment of Acne (IGA) score. A topical emulsion was applied twice daily for 2 months (M2) in each included patient. In the same series of acne patients, skin swab samples were collected from acne patients at baseline and M2 from lesional and non-lesional skin; skin swabs were collected for the metagenomic long-read analysis of microbiota.
METHODS: Acne patients with a gravity score IGA of >1<3 were included in this pilot study. An emulsion of O/W formulated with vegetal extract of Umbelliferae associated with a polysaccharide at 1% was applied twice daily for 2 months. At baseline and M2 clinical assessments were made; skin swab samples were also taken for microbiota analysis from lesional and non-lesional skin in each included patient. Extractions of genomic DNA (gDNA) from swab samples from baseline and from M2 were made, followed by full-length (V1-V9) amplification of the 16S rDNA and sequencing of amplicon libraries for strain-level bacterial community profiling.
RESULTS: In a series of 32 adult acne patients, the mean initial IGA scale was 3.1; at M2 the IGA scale was 1.5 (p < 0.001). The mean decrease in acne lesions was by 63%. Microbiome metagenomic long-read analysis in these series was mainly dominated by C. acnes followed by Staphylococcus epidermidis (S. epidermidis). The density of C. acnes ribotypes RT6 (non-acne strain) was increased at M2 compared to baseline and the density of ribotypes C. acnes RT1 to RT5 was decreased at M2, compared to baseline (p < 0.0001). S. epidermidis ribotypes (1 to 36) were non significantly increased at M2, compared to baseline (p < 0.1).
CONCLUSIONS: In a series of 32 acne patients that applied an emulsion based on vegetal extract of Umbelliferae and a polysaccharide at 1% twice daily, a significant clinical improvement in IGA scale for acne lesions was seen at M2, compared to baseline (p < 0.0001). The clinical improvement was correlated with an improvement in skin microbiome at M2 compared to baseline, indicated by the increase in the relative abundance of non-acne strain of C. acnes ribotype 6 and of the decrease in the relative abundance of acne strains ribotypes C. acnes RT1 to RT5.

Worldwide meat consumption and production have nearly quintupled in the last 60 years. In this context, research and the application of new technologies related to animal reproduction have evolved in an accelerated way. The objective of the present study was to apply nanoemulsions (NEs) as carriers of lipids to feed bovine embryos in culture media and verify their impact on the development of embryos produced in vitro. The NEs were characterized by particle size, polydispersity, size distribution, physical stability, morphology using atomic force microscopy (AFM), surface tension, density, pH, and rheological behavior. The NEs were prepared by the emulsification/evaporation technique. A central composite rotatable design (CCRD) was used to optimize the NE fabrication parameters. The three optimized formulations used in the embryo application showed an emulsion stability index (ESI) between 0.046 and 0.086, which reflects high stability. The mean droplet diameter analyzed by laser diffraction was approximately 70-80 nm, suggesting a possible transit across the embryonic zona pellucida with pores of an average 90 nm in diameter. AFM images clearly confirm the morphology of spherical droplets with a mean droplet diameter of less than 100 nm. The optimized formulations added during the higher embryonic genome activation phase in bovine embryos enhanced early embryonic development.

The emulsification potential of plant-based emulsifiers, that is, pea (PPI) and lentil (LPI) proteins (4%), corn arabinoxylans (CAX, 1%), and legume protein-arabinoxylan mixtures (4% proteins + 0.15 or 0.9% CAX), was evaluated by assessing: the surface tension and potential of emulsifiers, emulsifier antinutritional contents, emulsion droplet size, emulsion physical stability, and vitamin E bioaccessibility from 10% oil-in-water emulsions. Tween 80 (2%) was used as a control. All emulsions presented small droplet sizes, both fresh and upon storage, except 4% LPI + 0.9% CAX emulsion that exhibited bigger droplet sizes (d(4,3) of approximately 18.76 μm vs 0.59 μm for the control) because of droplet bridging. Vitamin E bioaccessibility from emulsions stabilized with the combination of 4% PPI and either 0.15% or 0.9% CAX (28 ± 4.48% and 28.42 ± 3.87%, respectively) was not significantly different from that of emulsions stabilized with Tween 80 (43.56 ± 3.71%), whereas vitamin E bioaccessibility from emulsions stabilized with individual emulsifiers was significantly lower.

Liamocins, a group of high-density glycolipids, are only produced by certain strains of the yeast-like fungi in the genus Aureobasidium. Until now, few studies have focused on the surfactant properties of liamocins produced from the highly diverse tropical strains of Aureobasidium. Therefore, the aims of this research were to screen the liamocin production from tropical strains of Aureobasidium spp. and to characterize their surfactant properties. A total of 41 strains of Thai Aureobasidium spp. were screened for their ability to produce liamocins, and the products were detected using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and thin-layer chromatography. Of those strains, 30 strains of Aureobasidium spp. tested were found to produce liamocins with yields ranging from 0.53 to 10.60 g/l. The nature of all crude liamocins was heterogeneous, with different compositions and ratios depending on the yeast strain. These liamocins exhibited relatively high emulsifying activity against vegetable oils tested, with an emulsification index of around 40-50%; the emulsion stability of some liamocins was up to 30 days. The obtained critical micelle concentration values were varied, with those ​​of liamocins produced from A. pullulans, A. melanogenum and A. thailandense falling in ranges from 7.70 to 119.78, 10.73 to > 1,000, and 68.56 to > 1,000 mg/l, respectively. The emulsification activity of liamocins was higher than that of the analytical grade rhamnolipids. These compounds showed strong surface tension reduction in a sodium chloride concentration range of 2-12% (w/v), pH values between 3 and 7, and temperatures between 4 and 121 °C. This is the first report of liamocins produced by A. thailandense.

Curdlan, a natural polysaccharide, exhibits emulsion-stabilizing and viscosity-modifying properties. However, when employed solely in the aqueous phase, curdlan\'s adhesive nature impedes droplet dispersion, resulting in a gel-like structure with limited applicability. This investigation formulated a biphasic stabilized oil-in-water emulsion by supplementing the oil phase with beeswax and the aqueous phase with curdlan and soy protein isolate (SPI). The addition of SPI transformed the structural characteristics from a gel-like to a mayonnaise-like structure. Maximal electrostatic repulsion was observed at an internal phase volume fraction of 30%, effectively precluding droplet aggregation owing to the absolute zeta potentials surpassing 40 mV. The emulsions displayed shear-thinning rheological behavior, with a higher storage modulus than the loss modulus, indicative of favorable elastic properties. Molecular docking revealed the predominant role of polar amino acids in facilitating hydrogen bond formation. This study provides a template for developing emulsions with biphasic stability and desirable dispersibility.

This study investigated the potential of a novel sustainable ingredient composed of rapeseed oil, linseed meal and beta-glucan (PALM-ALT) to mimic palm shortening functionality in cake. The combined functional properties of linseed meal and beta-glucan led to stable semi-solid emulsion-gels (20-31 μm oil droplet size, 105-115 Pa.s viscosity and 60-65 Pa yield stress). PALM-ALT contained 25 and 88% less total and saturated fat than palm shortening, whilst PALM-ALT cakes contained 26 and 75% less total and saturated fat than the palm-based control. PALM-ALT cakes matched the flavour profile of the palm-based control, while rapeseed oil cakes tasted more sour and less sweet than the control (p < 0.05). PALM-ALT cakes proved less hard and more cohesive than the control (p < 0.05), with 100% of the consumer panel preferring PALM-ALT formulations. This study demonstrated the unique potential of PALM-ALT as healthier, sustainable and competitive alternative to palm shortening.