When dealing with processes involving the compaction of bulk materials, very often the quality of the product is determined based on density measurements. Methods used in the industry do not produce compacted materials with high degrees of homogeneity. As a result, the quality of the resulting product, interpreted as its density, varies over the cross-section of the product. In this article, the authors present the results of a numerical study involving the analysis of the density distribution of compacted dry ice during the reciprocating process. The Drucker-Prager/cap model was used in this study, which allowed the change in mechanical properties of the compacted material to be taken into account during the simulation of the process. The diameter, height and density of the cylindrical specimens used in the numerical tests were taken as the variable parameters. Thus, as a result of the testing, the authors could formulate conclusions relating to their impact on the homogeneity of the material.

The developments in manufacturing technologies are expected to reduce energy input without compromising product quality. Regarding the material densification process, numerical simulation methods are applied to achieve this goal. In this case, relevant material models are built using functions that describe the variation in mechanical parameters of the material in question due to its deformation. The literature review conducted for this research has revealed a shortage of experimental research methods allowing a determination of the coefficient of friction at low temperatures, approximately 200 K. This article proposes a method for determining the friction coefficient of dry ice sliding against steel. The experimental results were analysed to obtain several functions describing the variation in the coefficient of friction. These functions were then compared using goodness-of-fit indexes. Finally, two functions with similar goodness-of-fit values were chosen. The findings of this research project will complement the already available information and may be used in various research and implementation projects related to the development or improvement of currently used crystallised carbon dioxide conversion processes.

To address the safety problems posed by the transportation of boar semen using LN, this study was conducted on the short-term storage of frozen boar semen in dry ice (-79 °C). Boar semen frozen in LN was transferred to dry ice, kept for 1 day, 3 days, 5 days, 7 days, or 8 days, and then moved back to LN. The quality of frozen semen stored in LN or dry ice was determined to evaluate the feasibility of short-distance transportation with dry ice. The results showed that 60 °C for 8 s was the best condition for thawing frozen semen stored in dry ice. No significant differences in spermatozoa motility, plasma membrane integrity, or acrosome integrity were observed in semen after short-term storage in dry ice compared to LN (p > 0.05). There were no significant changes in antioxidant properties between storage groups either (p > 0.05). In conclusion, dry ice could be used as a cold source for the short-term transportation of frozen boar semen for at least 7 days, without affecting sperm motility, morphological integrity, or antioxidant indices.

Cryopreserved semen is routinely shipped in liquid nitrogen. Dry ice could serve as an alternative coolant, however, frozen storage above liquid nitrogen temperatures (LN2, -196 °C) may negatively affect shelf-life and cryosurvival. In this study, we determined critical temperatures for storage of cryopreserved stallion sperm. We evaluated: (i) effects of cooling samples to different subzero temperatures (-10 °C to -80 °C) prior to storing in LN2, (ii) stability at different storage temperatures (i.e., in LN2, dry ice, -80 °C and -20 °C freezers, 5 °C refrigerator), and (iii) sperm cryosurvival during storage on dry ice (i.e., when kept below -70 °C and during warming). Furthermore, (iv) we analyzed if addition of synthetic polymers (PVP-40, Ficoll-70) modulates ice crystallization kinetics and improves stability of cryopreserved specimens. Sperm motility and membrane intactness were taken as measures of cryosurvival, and an artificial insemination trial was performed to confirm fertilizing capacity. We found that adding PVP-40 or Ficoll-70 to formulations containing glycerol reduced ice crystal sizes and growth during annealing. Post-thaw sperm viability data indicated that samples need to be cooled below -40 °C before they can be safely plunged and stored in LN2. No negative effects of relocating specimens from dry ice to LN2 and vice versa became apparent. However, sample warming above -50 °C during transport in dry ice should be avoided to ensure preservation of viability and fertility. Moreover, addition of PVP-40 or Ficoll-70 was found to increase sperm cryosurvival, especially under non-ideal storage conditions where ice recrystallization may occur.

The BG Sentinel-2 (BGS-2) and BG-Pro traps (BGS-2 configuration) were compared for their effectiveness to collect Aedes vectors and related nuisance mosquitoes in north central Florida during 2022. Traps were baited with either dry ice pellets, pressurized carbon dioxide (CO2) gas, or the novel BG yeast-derived CO2 generator. Additionally, each trap was fitted with the BG Sweetscent lure. Sixteen species were collected including Aedes albopictus and Ae. aegypti, which accounted for about 20% of the collections. The BGS-2 collected more mosquitoes compared to the BG-Pro, but the relative percent abundance of each species to total collection from each trap type was similar. Overall mosquito abundance was significantly greater in both trap types baited with dry ice compared with the other CO2 sources. Significantly more Ae. albopictus were collected from BGS-2 traps baited with dry ice than all other CO2 and trap configurations. Lastly, we did not observe any significant differences in Ae. aegypti abundance between trap type or CO2 source.

UNASSIGNED: The process of decoverslipping is often required in a laboratory to review or examine an older slide which tends to fade over time, making it almost impossible to use it for research or study purposes. The sections then need to be re-stained which can only be done after removing the coverslip. The traditional method of decoverslipping using xylene is a time-consuming process. Various methods have been used in the past; however, none were found to be completely effective. Dry ice, the solid form of carbon dioxide, is an easily available, cheap cooling agent with a low freezing temperature (-78.5°C) which was evaluated for its efficacy in decoverslipping process, as an alternative to xylene.
UNASSIGNED: 64 faded haematoxylin and eosin (H&E)-stained histopathology slides were randomly selected and segregated, according to duration of year, into eight major groups. Each group was further divided into four subgroups according to the time that the slides were subjected for decoverslipping. The slides were placed on dry ice and the time was set. Once the coverslip was removed, the slides were placed in xylene to remove any residual mountant. The tissue sections were evaluated for physical disfigurement followed by re-staining with H&E to check for any change in tissue morphology.
UNASSIGNED: The mean time taken for removal of coverslip using dry ice was 35 seconds.
UNASSIGNED: This technique is easy, fast, and effective, with no tissue loss or compromise in staining quality, thereby preventing xylene toxicity and its effect on the environment.

Secondary electrospray ionization-high resolution mass spectrometry (SESI-HRMS) is an established technique in the field of breath analysis characterized by its short analysis time, as well as high levels of sensitivity and selectivity. Traditionally, SESI-HRMS has been used for real-time breath analysis, which requires subjects to be at the location of the analytical platform. Therefore, it limits the possibilities for an introduction of this methodology in day-to-day clinical practice. However, recent methodological developments have shown feasibility on the remote sampling of exhaled breath in Nalophan® bags prior to measurement using SESI-HRMS. To further explore the range of applications of this method, we conducted a proof-of-concept study to assess the impact of the storage time of exhaled breath in Nalophan® bags at different temperatures (room temperature and dry ice) on the relative intensities of the compounds. In addition, we performed a detailed study of the storage effect of 27 aldehydes related to oxidative stress. After 2 h of storage, the mean of intensity of allm/zsignals relative to the samples analyzed without prior storage remained above 80% at both room temperature and dry ice. For the 27 aldehydes, the mean relative intensity losses were lower than 20% at 24 h of storage, remaining practically stable since the first hour of storage following sample collection. Furthermore, the mean relative intensity of most aldehydes in samples stored at room temperature was higher than those stored in dry ice, which could be related to water vapor condensation issues. These findings indicate that the exhaled breath samples could be preserved for hours with a low percentage of mean relative intensity loss, thereby allowing more flexibility in the logistics of off-line SESI-HRMS studies.

Dried blood spot (DBS) analysis has existed for >50 years, but application of this technique to fecal analysis remains limited. To address whether dried fecal spots (DFS) could be used to measure fecal bile acids, we collected feces from five subjects for each of the following cohorts: 1) healthy individuals, 2) individuals with diarrhea, and 3) Clostridioides difficile-infected patients. Homogenized fecal extracts were loaded onto quantitative DBS (qDBS) devices, dried overnight, and shipped to the bioanalytical lab at ambient temperature. For comparison, source fecal extracts were shipped on dry ice and stored frozen. After 4 mo, frozen fecal extracts and ambient DFS samples were processed and subjected to targeted liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based metabolomics with stable isotope-labeled standards. We observed no differences in the bile acid levels measured between the traditional extraction and the qDBS-based DFS methods. This pilot data demonstrates that DFS-based analysis is feasible and warrants further development for fecal compounds and microbiome applications.NEW & NOTEWORTHY Stool analysis in remote settings can be challenging, as the samples must be stored at -80°C and transported on dry ice for downstream processing. Our work indicates that dried fecal spots (DFS) on Capitainer quantitative DBS (qDBS) devices can be stored and shipped at ambient temperature and yields the same bile acid profiles as traditional samples. This approach has broad applications for patient home testing and sample collection in rural communities or resource-limited countries.

In order to make dry ice transportation of vitrified embryos practical, a near-equilibrium vitrification was developed using a cryoprotectant solution (EDFS10/10a), by which mouse embryos at various stages were vitrified in a near-equilibrium environment. EDFS10/10a consisted of 10% (v/v) ethylene glycol, 10% (v/v) Me2SO, 0.4 M sucrose and 24% (w/v) Ficoll PM70. This method exhibited the benefits of slow freezing and vitrification, with a low risk of osmotic injury. In this study, we investigated whether mouse oocytes are vitrifiable with EDFS10/10a in a highly dehydrated/concentrated state, and whether they can remain fertilizable and developing into embryos after vitrification. When mature mouse oocytes were vitrified in liquid nitrogen and after 4-28 days of storage at -80 °C, high survival rates were observed (88-99%). Vitrified and warmed oocytes were subjected to partial zona dissection and in vitro fertilized. The rate of 2-cell stage was 80-82%. Blastocyst formation rate was 55-70% which was similar to that of embryos derived from fresh oocytes. After the 2-cell embryos were transferred to recipient mice, the implantation and offspring rates did not differ significantly from those of embryos derived from fresh oocytes, indicating that vitrified oocytes retained the developmental ability. Therefore, it is possible to vitrify mouse oocytes in a near-equilibrium state using EDFS10/10a and conveniently transported using dry ice.

The Western honey bee (Apis mellifera) is economically important as the primary managed pollinator of many agricultural crops and for the production of various hive-related commodities. Honey bees are not classically or thoroughly covered in veterinary pathology training programs. Given their unique anatomic and biological differences from the other species more traditionally evaluated by veterinary pathologists, establishing routine and consistent methods for processing samples for histology ensures accurate diagnostic and research conclusions. We developed and tested several field protocols for the sampling of honey bees. We compared the tissue-quality outcomes for worker bees fixed, collected, and/or softened under the following protocols: 1) routine formalin fixation; 2) softening chitin via exposure to Nair for 2 d or 3) 5 d; 4) shortened times between formalin submersion and trimming of body segments to enhance penetration of formalin into internal tissues; 5) ethanol submersion of specimen prior to formalin fixation; 6) indirect dry ice exposure; and 7) prolonged -80°C storage. Routine formalin fixation, exposure to Nair for 2 d, indirect dry ice exposure, and trimming body segments within 2 h of formalin submersion resulted in the highest quality histologic tissue sections. The poorest quality sections resulted from softening of chitin by exposure to Nair for 5 d, submersion in ethanol for 3 d before formalin fixation, and prolonged storage at -80°C. Our results indicate that routine formalin fixation is adequate, and that immobilizing bees with indirect dry ice exposure aids in sample collection without negatively impacting the quality of histologic sections.