The use of a conjugate N-containing ligand resulted in the decreasing of structural dimensions from 2D network of [Tb(2-pyia)(Ac)(H2O)] (CP1) to 1D chain [Tb(2-pyia)(Ac)(IDP)] (CP2) (2-H2pyia = 5-(pyridin-2-ylmethoxy) isophthalic acid and IDP=imidazo[4,5-f]-[1,10] phenanthroline). Both of them exhibit the characteristic luminescence of Tb ions and could have high fluorescence sensing properties for cefixime and fluridine. The different sensing properties for nitro explosives are manifested as CP1 for nitrobenzene and CP2 for 4-nitrophenol due to the difference in structure. Furthermore, CP2 exhibits the ratiometric fluorescence sensing for Fe3+ ion with a low detection limit of 0.405 μM. The fluorescence sensing mechanism of the two Tb complexes for different analytes was investigated using experimental methods and theoretical calculations. CP1 was used for the detection of Flu residues in the actual system and better results were obtained. The work shows the introduction of the chelated ligand might affect the structural and sensing performance changes of coordination polymers.

Tetracycline (TC) has been widely used in clinical medicine and animal growth promotion due to its broad-spectrum antibacterial properties and affordable prices. Unfortunately, the high toxicity and difficult degradation rate of TC molecules make them easy to accumulate in the environment, which breaks the ecological balance and seriously threatens human health. Rapid and accurate detection of TC residue levels is important for ensuring water quality and food safety. Recently, fluorescence detection technology of TC residues has developed rapidly. Lanthanide nanomaterials, based on the high luminescence properties of lanthanide ions and the high matching with TC energy levels, are favored in the real-time trace detection of TC due to their advantages of high sensitivity, rapidity, and high selectivity. Therefore, they are considered potential substitutes for traditional detection methods. This review summarizes the synthesis strategy, TC response mechanism, removal mechanism, and applications in intelligent sensing. Finally, the development of lanthanide nanomaterials for TC fluorescence detection and removal is reasonably summarized and prospected. This review provides a reference for the establishment of a method for the accurate determination of TC content in complex food matrices.

Flexible piezoresistive sensors are in high demand in areas such as wearable devices, electronic skin, and human-machine interfaces due to their advantageous features, including low power consumption, excellent bending stability, broad testing pressure range, and simple manufacturing technology. With the advancement of intelligent technology, higher requirements for the sensitivity, accuracy, response time, measurement range, and weather resistance of piezoresistive sensors are emerging. Due to the designability of polymer porous materials and conductive phases, and with more multivariate combinations, it is possible to achieve higher sensitivity and lower detection limits, which are more promising than traditional flexible sensor materials. Based on this, this work reviews recent advancements in research on flexible pressure sensors utilizing polymer porous materials. Furthermore, this review examines sensor performance optimization and development from the perspectives of three-dimensional porous flexible substrate regulation, sensing material selection and composite technology, and substrate and sensing material structure design.

Pesticide residues in agricultural products are serious threat to people\'s health. Real-time monitoring of pesticides residues in the environment and agricultural products posed challenges to sustainable methods with high analytical performance for pesticide detection. Herein, waste PVC/coal fly ash (the mass ratio of PVC and coal fly ash was 4:1) was dechlorinated in subcritical water at low temperature to achieve nearly 100 % dechlorination of PVC and obtain carbon-based composite materials (CM-Fe/Al/Si-dPVC) with strong sening activity. For CM-Fe/Al/Si-dPVC, CFe bonding resulted in strong electron migration, and nano/μm SiO2 and Al2O3 doping in the layered polyene C matrix provided large specific surface area, and silicon hydroxyl created good heterogeneous catalytic interfaces. CM-Fe/Al/Si-dPVC could strongly trigger luminol chemiluminescence (CL) reaction and produce intense CL signals. Neonicotinoid pesticides (acetamiprid and imidacloprid) bonded with CM-Fe/Al/Si-dPVC through coordination chelation and hydrogen bonding, which shielded the catalytic active site and increased the Fermi level of system, thus quenching CL reaction. Inspired by these, a cheap CL assay was constructed for detecting neonicotinoids combinations of acetamiprid and imidacloprid (NICs). The detection limits of NICs were 0.7 ng/L. Satisfactory recoveries were obtained for real agricultural products and environmental samples. The results of life cycle evaluation (LCA) revealed that the strategy had significantly small global warming potential (GWP). This work presented a sustainable method with environmental benefits for the detection of neonicotinoids, and also opened up new way for the recycling of organic solid wastes.

A bisalicylhydrazone based fluorescence probe, bisalicyladehyde benzoylhydrazone (BS-BH), has been designed to detect Al3+. It exhibited high sensitivity and selectivity towards Al3+ in methanol-water media in physiological condition. Large stokes shifts (∼122 nm) and over ∼1000-fold enhanced fluorescence intensity were observed, which was ascribed to the formation of the two relatively independent rigid extended π conjugated systems bridged by biphenyl group when binding with Al3+. A 1:2 binding ratio between BS-BH and Al3+ was shown by Job\'s plot. Based on the fluorescence titration data, the detection limit was down to 3.50 nM and the association constant was evaluated to be 1.12 × 109 M-2. The plausible fluorescence sensing mechanism of suppressed ESIPT, inhibited PET, activated CHEF and restricted C = N isomerization was confirmed by a variety of spectral experiments and DFT / TD-DFT calculations. The reversibility of recognition of Al3+ for probe BS-BH was validated by adding Na2-EDTA. In addition, the MTT assay showed the good biocompatibility of BS-BH and BS-BH could be used for imaging Al3+ in living cells.

BACKGROUND: The detection of plasticizers in the environment is important to prevent environmental risks and people\'s health hazards. Improving recycling efficiency of waste PVC still faced challenges.
RESULTS: In this work, it was found that solid products from waste PVC/coal gangue dechlorination in subcritical water (dPVC) had strong catalysis activity for luminol-H2O2 chemiluminescence (CL) reaction. Phthalates, common plasticizers, could bond and adsorb on dPVC, which greatly inhibited the luminol-H2O2-dPVC CL reaction. Based on this, a low-cost CL analysis was constructed for the detection of phthalates combinations (PACs) and di-(2-ethylhexyl) phthalate (DEHP) in the environment. The detection limit for PACs and DEHP was 0.048 ng/L and 0.13 ng/L, respectively. Compared with HPLC standard method, the dPVC CL analysis had accuracy and reliability for the detection of phthalates in actual environmental samples. Besides, the results of life cycle assessment (LCA) revealed that dPVC for CL sensing materials had significantly small global warming potential (GWP).
CONCLUSIONS: The use of dPVC for CL sensing not only improved the recycling efficiency of PVC, but also reduced carbon emissions of obtaining CL sensing materials.

The utilization of fluorescent quantum dots (FL QDs) has gained significant traction in the realm of antibiotic detection, owing to their exceptional FL properties and versatility. Various types of QDs have been tailored to exhibit superior FL characteristics, employing diverse capping agents such as metals, surfactants, polymers, and biomass to protect and stabilize their surfaces. In their evolution, FL QDs have demonstrated both \"turn-off\" and \"turn-on\" mechanisms in response to the presence of analytes, offering promising avenues for biosensing applications. This review article provides a comprehensive overview of the recent advancements in antibiotic detection utilizing FL QDs as biosensors. It encompasses an extensive examination of different types of FL QDs, including carbon, metal, and core-shell QDs, deployed for the detection of antibiotics. Furthermore, the synthesis methods employed for the fabrication of various FL QDs are elucidated, shedding light on the diverse approaches adopted in their preparation. Moreover, this review delves into the intricate sensing mechanisms underlying FL QDs-based antibiotic detection. Various mechanisms, such as photoinduced electron transfer, electron transfer, charge transfer, Forster resonance energy transfer, static quenching, dynamic quenching, inner filter effect, hydrogen bonding, and aggregation-induced emission, are discussed in detail. These mechanisms provide a robust scientific rationale for the detection of antibiotics using FL QDs, showcasing their potential for sensitive and selective sensing applications. Finally, the review addresses current challenges and offers perspectives on the future improvement of FL QDs in sensing applications. Insights into overcoming existing limitations and harnessing emerging technologies are provided, charting a course for the continued advancement of FL QDs-based biosensing platforms in the field of antibiotic detection.

Transition metal dichalcogenides (TMDs) with a two-dimensional (2D) structure and semiconducting features are highly favorable for the production of NH3gas sensors. Among the TMD family, WS2, WSe2, MoS2, and MoSe2exhibit high conductivity and a high surface area, along with high availability, reasons for which they are favored in gas-sensing studies. In this review, we have discussed the structure, synthesis, and NH3sensing characteristics of pristine, decorated, doped, and composite-based WS2, WSe2, MoS2, and MoSe2gas sensors. Both experimental and theoretical studies are considered. Furthermore, both room temperature and higher temperature gas sensors are discussed. We also emphasized the gas-sensing mechanism. Thus, this review provides a reference for researchers working in the field of 2D TMD gas sensors.

The present work demonstrates the correlation between structure, properties, and self-sensing protocols of in situ prepared ferric oxide doped grafted copolymer composite, comprised of ferric oxide, chitosan, and polypyrrole (α-Fe2O3-en-CHIT-g-PPy) for residual ibuprofen present in natural and artificial samples. The chemical structure, morphology, functionality, and physio-mechanical properties of the composite were determined by Fourier transform infrared spectrometer (FT-IR), Raman spectra, X-ray diffraction (XRD), Scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Two probe method, and standard ASTM techniques to explore sensing nature. The results confirm the evolution of axially aligned structure against 110 planes of α-Fe2O3 and chemically functionalized expanded polymer matrix during in-situ chemical polymerization of pyrrole, with better porosity, interactivity, and improved electrical conductivity i.e. 7.32 × 10-3 S cm-1. Further, a thin film of prepared composite coated on an ITO glass plate was explored for potentiometric sensing of ibuprofen (IBU) present in artificial and natural samples without the use of any additional energy sources. The observed sensing parameters are the sensing ranging 0.5 μM to 100.0 μM, sensitivity 2.5081 mV μM-1 cm-2, response time 50 s, recovery time 10 s, and stability for 60 days. The sensing mechanism of the IBU sensor and effective charge transfer in the electrode was also discussed based on changes in IR spectra of the electrode recorded before and after sensing due to surface oxidation of IBU due to the presence of iron and doping effect of iron oxide in the composite.

The level of fluoride ions (F-) in the human body is closely related to various pathological and physiological states, and the rapid detection of F- is important for studying physiological processes and the early diagnosis of diseases. In this study, the detailed sensing mechanism of a novel high-efficiency probe (PBT) based on 2-(2\'-hydroxyphenyl)-benzothiazole derivatives towards F- has been fully investigated based on density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods. F- attacks the O-P bond of PBT to cleavage the dimethylphosphinothionyl group, and the potential products were evaluated by Gibbs free energy and spectroscopic analyses, which ultimately identified the product as HBT-Enol1 with an intramolecular hydrogen bond. Bond parameters, infrared vibrational spectroscopy and charge analysis indicate that the hydrogen bond is enhanced at the excited state (S1), favoring excited state intramolecular proton transfer (ESIPT). The mild energy barrier further evidences the occurrence of ESIPT. Combined with frontier molecular orbital (FMO) analysis, the fluorescence quenching of PBT was attributed to the photoinduced electron transfer (PET) mechanism and the fluorescence turn-on mechanism of the product was attributed to the ESIPT process of HBT-Enol1.