UNASSIGNED: This study aimed to assess the potential of poly (acrylic acid)/tricalcium phosphate nanoparticles (PAA/triCaPNPs) scaffold in terms of biocompatibility and osteoconductivity properties the in-vivo evaluation as well as to investigate the performance of PAA/triCaPNPs scaffold (with or without exosomes derived from UC-MSCs) for bone regeneration of rat critical-sized defect.
UNASSIGNED: PAA/triCaPNPs scaffold was made from acrylic acid (AA) monomer, N,N\'-methylenebisacrylamide (MBAA), sodium bicarbonate (SBC), and ammonium persulfate (APS) through freeze-drying method. For in vivo evaluation, we randomly divided 24 rats into three groups. The rat calvarial bone defects were treated as follows: (1) Control group: defects without any treatment, (2) scaffold group: defects treated with scaffold only, (3) scaffold+exo group: defects treated with scaffold enriched with exosomes (1 μg/μL, 150 μg per rat). Eight- and 12-weeks post-surgery, half of the animals were sacrificed and bone regeneration was examined through micro-computerized tomography (µ-CT), histological staining, and immunohistochemistry (IHC).
UNASSIGNED: Quantitative analysis based on µ-CT scan images at 8 and 12 weeks post-implantation clearly indicated that healing rate for defects that were filled with scaffold enriched with exosome was significantly higher than defects filled with scaffold without exosome. The H&E and Masson staining results revealed that more new bone-like form developed in the scaffold+exo group than that in control and scaffold groups. Further, IHC staining for osteocalcin and CD31 confirmed that more bone healing in the scaffold+exo group at 12 weeks could be associated with osteogenesis and angiogenesis concurrently.
UNASSIGNED: In the present study, we aimed to investigate the therapeutic potential of PAA/triCaPNPs scaffold as a carrier of human UC-MSC-derived exosome to achieve the exosome-controlled release on calvarial bone defect. The in vivo results indicated that the exosome-enriched scaffold could effectively minify the defect area and improve the bone healing in rat model, and as such it could be an option for exosome-based therapy.

Krypton chloride (KrCl*) excimer lamps (222 nm) are used as a promising irradiation source to drive ultraviolet-based advanced oxidation processes (UV-AOPs) in water treatment. In this study, the UV222/peracetic acid (PAA) process is implemented as a novel UV-AOPs for the degradation of emerging contaminants (ECs) in water. The results demonstrate that UV222/PAA process exhibits excellent degradation performance for carbamazepine (CBZ), with a removal rate of 90.8 % within 45 min. Notably, the degradation of CBZ in the UV222/PAA process (90.8 %) was significantly higher than that in the UV254/PAA process (15.1 %) at the same UV dose. The UV222/PAA process exhibits superior electrical energy per order (EE/O) performance while reducing resource consumption associated with the high-energy UV254/PAA process. Quenching experiments and electron paramagnetic resonance (EPR) detection confirm that HO• play a dominant role in the reaction. The contributions of direct photolysis, HO•, and other active species (RO• and 1O2) are estimated to be 5 %, 88 %, and 7 %, respectively. In addition, the effects of Cl-, HCO3-, and humic acid (HA) on the degradation of CBZ are evaluated. The presence of relatively low concentrations of Cl-, HCO3-, and HA can inhibit CBZ degradation. The UV222/PAA oxidation process could also effectively degrade several other ECs (i.e., iohexol, sulfamethoxazole, acetochlor, ibuprofen), indicating the potential application of this process in pollutant removal. These findings will propel the development of the UV222/PAA process and provide valuable insights for its application in water treatment.

Lead(II) is a potential carcinogen of heavy-metal ions (HIs). With the wide application of Pb-bearing products including lead alloy products, and new-energy lead-ion batteries, lead pollution has become a tricky problem. To solve such a difficulty, novel ultrathin MoS2-vinyl hybrid membranes (MVHMs) with a \"spring\" effect were synthesized via co-polymerization of acrylic acid, styrene and molybdenum disulfide (MoS2) and their adsorptions for HIs were explored. The \"spring\" effect derived from the interaction between the tendency of the short polyacrylic acid (PAA) chain connected with MoS2 to spread outward and the coulomb force between layers from MoS2 (s-MoS2), which enlarge the spacing of MoS2 layers without changing the number of layers after membrane formation, which changes the swelling membrane to a dense membrane and reduces the original thickness from 0.5 cm to 0.011 mm in the thickness direction. The adsorption experiment revealed that these MVHMs had super adsorption performance and high selectivity for Pb2+ by comparison with other five metal ions: Cu2+, Cd2+, Ni2+, Cr3+ and Zn2+. Especially, the adsorption quantity of MVHMs for Pb2+ could approach 2468 mg/g and the maximum adsorption ratio of qe[Pb2+]/qe[Cu2+] can reach 10.909. These values were much larger than the data obtained with the adsorbents reported in the last decade. A variety of models are applied to evaluate the effect of ionic groups. It was confirmed that -COOH plays a key role in adsorption of HIs and s-MoS2 also has a certain contribution. Conversely, ion exchange plays only a minor role during the period of adsorption process. Effective diffusion coefficient (Deff) of Pb(II) had the largest values among these metal ions. Hence, these hybrid membranes are promising adsorbents for the removal of Pb2+ from water containing various ions.

To realize on stable and real-time monitoring of human activities, novel hydrogels using polyacrylic acid (PAA) and carboxymethyl guar gum (CMGG) were fabricated as wearable and flexible strain or pressure sensors in the presence of lignosulfonate (LS) and Al3+. Based on the co-existence of metal coordination bonds, hydrogen bonds and ionic interaction in this system, the obtained hydrogels exhibited desirable mechanical properties with good self-recovery ability. The hydrogels displayed good self-adhesion behavior and an ultra-high tensile sensitivity (gauge factor (GF) = 24.30), therefore, they could precisely detect human joints movements such as elbow, wrist, and finger bending as well as tiny movements and external stimuli such as swallowing, smile, frown, pulse, speaking, writing, and even the falling of different liquid drops. Additionally, the hydrogels showed excellent self-healing ability with the healing efficiency as high as 100 % after 30 h. Most importantly, the healed hydrogel could perform the same sensing performance as before. Based on these distinguished characteristics, this hydrogel represents great potentials in wearable and flexible sensors for long-term and stable health monitoring application.

The genus Nanorana contains three subgenera, namely Nanorana, Paa, and Chaparana, and currently, there are four species known to science in Nanorana (Nanorana). In this study, we describe a new species belonging to the subgenus Nanorana from northwestern Yunnan, China. Phylogenetically, the new species, Nanorana laojunshanensissp. nov., is the sister to the clade of N. pleskei and N. ventripunctata. Morphologically, the new species can be distinguished from known congeners by the combination of following characters: present tympanum, equal fingers I and II, small body size, yellow ventral surface of limbs, distinct vomerine teeth, indistinct subarticular tubercles, head width greater than head length, slender supratympanic fold, absent dorsolateral fold, nuptial spines present on fingers I and II in adult males, absent vocal sac, and paired brown spines on the chest. Moreover, we suggest moving the genus Allopaa into Nanorana (Chaparana) and consider that N. arunachalensis is neither an Odorrana species nor a member of the subfamily Dicroglossinae (therefore Nanorana), but probably represents a distinct genus closely related to Ingerana or belongs to Ingerana, pending more data. Additionally, we consider that Nanorana minica deserves the rank of an independent subgenus, and we suggest assigning N. arnoldi, N. blanfordii, N. ercepeae, N. polunini, N. rarica, N. rostandi, N. vicina, N. xuelinensis, and N. zhaoermii into the subgenus Paa and placing N. kangxianensis, N. phrynoides, and N. sichuanensis in the subgenus Chaparana.

UNASSIGNED: This study focused on preparing a multiscale three-dimensional (3D) scaffold using tricalcium phosphate nanoparticles (triCaPNPs) in a substrate of poly(acrylic acid) (PAA) polymer for controlled release of exosomes in bone tissue engineering.
UNASSIGNED: A scaffold was fabricated with a material mixture containing acrylic acid (AA) monomer, N,N\'-methylenebisacrylamide (MBAA), ammonium persulfate (APS), sodium bicarbonate (SBC), and triCaPNPs called composite scaffold (PAA/triCaPNPs) via cross-linking and freeze-drying methods. The synthesis process was easy and without complex multi-steps. Through mimicking the hybrid (organic-inorganic) structure of the bone matrix, we here chose triCaPNPs for incorporation into the PAA polymer. After assessing the physicochemical properties of the scaffold, the interaction of the scaffold with human umbilical cord mesenchymal stem cells (UC-MSCs) such as attachment, proliferation, and differentiation to osteoblast cells was evaluated. In addition, we used DiI-labeled exosomes to verify the exosome entrapment and release from the scaffold.
UNASSIGNED: The polymerization reaction of 3D scaffold was successful. Based on results of physicochemical properties, the presence of nanoparticles in the composite scaffold enhanced the mechanical stiffness, boosted the porosity with a larger pore size range, and offered better hydrophilicity, all of which would contribute to greater cell penetration, proliferation, and then better bone differentiation. In addition, our results indicated that our scaffold could take up and release exosomes, where the exosomes released from it could significantly enhance the osteogenic commitment of UC-MSCs.
UNASSIGNED: The current research is the first study fabricating a multiscale scaffold using triCaPNPs in the substrate of PPA polymer using a cross-linker and freeze-drying process. This scaffold could mimic the nanoscale structure and chemical combination of native bone minerals. In addition, our results suggest that the PAA/triCaPNPs scaffold could be beneficial to achieve controlled exosome release for exosome-based therapy in bone tissue engineering.

The potential of using commercial peroxyacetic acid (PAA) for Vibrio parahaemolyticus sanitization was evaluated. Commercial PAA of 0.005 % (v/v, PAA: 2.24 mg/L, hydrogen peroxide: 11.79 mg/L) resulted in a planktonic cell reduction of >7.00 log10 CFU/mL when initial V. parahaemolyticus cells averaged 7.64 log10 CFU/mL. For cells on stainless steel coupons, treatment of 0.02 % PAA (v/v, PAA: 8.96 mg/L, hydrogen peroxide: 47.16 mg/L) achieved >5.00 log10 CFU/cm2 reductions in biofilm cells for eight strains but not for the two strongest biofilm formers. PAA of 0.05 % (v/v, PAA: 22.39 mg/L, hydrogen peroxide: 117.91 mg/L) was required to inactivate >5.00 log10 CFU/cm2 biofilm cells from mussel shell surfaces. The detection of PAA residues after biofilm treatment demonstrated that higher biofilm production resulted in higher PAA residues (p < 0.05), suggesting biofilm is acting as a barrier interfering with PAA diffusing into the matrices. Based on the comparative analysis of genomes, robust biofilm formation and metabolic heterogeneity within niches might have contributed to the variations in PAA resistance of V. parahaemolyticus biofilms.

There is an urgent need to establish protocols on how to protect salmonids in aquaculture from outbreaks of proliferative kidney disease (PKD). For this purpose, systems for a continuous application of peracetic acid (PAA, 0.1 mg l-1) and of ultraviolet C light (UV-C, 323.5-158.6 mW s cm-2) were installed in the inlet of raceway-channels within a sub-unit of a commercial rainbow trout Oncorhynchus mykiss farm. After 127 d of rearing, a fish health examination was conducted. Fish in the control and PAA treatment groups showed signs of PKD. In contrast, fish in the UV-C treatment group showed almost no signs of disease based on clinical examinations and necropsy. This observation indicates that UV-C irradiation could be a promising tool to protect fish from PKD in the future.

Disinfection is essential to swimming pool water (SPW) quality. Peracetic acid (PAA) has attracted attention for water disinfection for advantages such as less formation of regulated DBPs. Persistence kinetics of disinfectants is difficult to elucidate in pools because of the complex water matrix stemming from body fluid loadings from swimmers and long residence times. In this research, the persistence kinetics of PAA was investigated in SPW benchmarked against free chlorine, use bench-scale experiments and model simulation. Kinetics models were developed to simulate the persistence of PAA and chlorine. The stability of PAA was less sensitive to swimmer loadings than chlorine. An average swimmer loading event reduced the apparent decay rate constant of PAA by 66 %, a phenomenon that diminished with increasing temperatures. L-histidine and citric acid from swimmers were identified as main retardation contributors. By contrast, a swimmer loading event instantaneously consumed 70-75 % of the residual free chlorine. The required total dose of PAA was 97 % less than chlorine under the 3-days cumulative disinfection mode. Temperature was positively correlated with disinfectant decay rate, with PAA being more sensitive than chlorine. These results shed light on the persistence kinetics of PAA and its influential factors in swimming pool settings.

Auxins are a class of plant hormones playing crucial roles in a plant\'s growth, development, and stress responses. Phenylacetic acid (PAA) is a phenylalanine-derived natural auxin found widely in plants. Although the auxin activity of PAA in plants was identified several decades ago, PAA homeostasis and its function remain poorly understood, whereas indole-3-acetic acid (IAA), the most potent auxin, has been used for most auxin studies. Recent studies have revealed unique features of PAA distinctive from IAA, and the enzymes and intermediates of the PAA biosynthesis pathway have been identified. Here, we summarize the occurrence and function of PAA in plants and highlight the recent progress made in PAA homeostasis, emphasizing PAA biosynthesis and crosstalk between IAA and PAA homeostasis.