OBJECTIVE: To assess laser-tissue interactions through ablation, coagulation, and carbonisation characteristics in a non-perfused porcine kidney model between three pulsed lasers: holmium (Ho): yttrium-aluminium-garnet (YAG), thulium fiber laser (TFL), and pulsed thulium (p-Tm):YAG.
METHODS: A 150-W Ho:YAG, a 60-W TFL, and a 100-W p-Tm:YAG lasers were compared. The laser settings that can be set identically between the three lasers and be clinically relevant for prostate laser enucleation were identified and used on fresh, unfrozen porcine kidneys. Laser incisions were performed using stripped laser fibers of 365 and 550 μm, set at distances of 0 and 1 mm from the tissue surface at a constant speed of 2 mm/s. Histological analysis evaluated shape, depth, width of the incision, axial coagulation depth, and presence of carbonisation.
RESULTS: Incision depths, widths, and coagulation zones were greater with Ho:YAG and p-Tm:YAG lasers than TFL. Although no carbonisation was found with the Ho:YAG and p-Tm:YAG lasers, it was common with TFL, especially at high frequencies. The shapes of the incisions and coagulation zones were more regular and homogeneous with the p-Tm:YAG laser and TFL than with Ho:YAG laser. Regardless of the laser used, short pulse durations resulted in deeper incisions than long pulse durations. Concerning the distance, we found that to be effective, TFL had to be used in contact with the tissue. Finally, 365-μm fibers resulted in deeper incisions, while 550-μm fibers led to wider incisions and larger coagulation zones.
CONCLUSIONS: Histological analysis revealed greater tissue penetration with the p-Tm:YAG laser compared to the TFL, while remaining less than with Ho:YAG. Its coagulation properties seem interesting insofar as it provides homogeneous coagulation without carbonisation, while incisions remained uniform without tissue laceration. Thus, the p-Tm:YAG laser appears to be an effective alternative to Ho:YAG and TFL lasers in prostate surgery.

Ho: YAG laser lithotripsy is widely used for urinary stone treatment, but concerns persist regarding its thermal effects on renal tissues. This study aimed to monitor intrarenal temperature changes during kidney stone treatment using retrograde intrarenal surgery with Ho: YAG laser. Fifteen patients were enrolled. Various laser power settings (0.8 J/10 Hz, 1.2 J/12 Hz) and irrigation modes (10 cc/min, 15 cc/min, 20 cc/min, gravity irrigation, and manual pump irrigation) were used. A sterile thermal probe was attached to a flexible ureterorenoscope and delivered into the calyceal system via the ureteral access sheath. Temperature changes were recorded with a T-type thermal probe with ± 0.1 °C accuracy. Laser power significantly influenced mean temperature, with a 4.981 °C difference between 14 W and 8 W laser power (p < 0.001). The mean temperature was 2.075 °C higher with gravity irrigation and 2.828 °C lower with manual pump irrigation (p = 0.038 and p = 0.005, respectively). Body mass index, laser power, irrigation model, and operator duty cycle explained 49.5% of mean temperature variability (Adj. R2 = 0.495). Laser power and operator duty cycle positively impacted mean temperature, while body mass index and specific irrigation models affected it negatively. Laser power and irrigation rate are critical for intrarenal temperature during Ho: YAG laser lithotripsy. Optimal settings and irrigation strategies are vital for minimizing thermal injury risk. This study underscores the need for ongoing research to understand and mitigate thermal effects during laser lithotripsy.

UNASSIGNED: To evaluate the efficacy and safety of Holmium: Yttrium-Aluminum-Garnet (Ho:YAG) laser in bladder lithotripsy using high-power settings > 100 W.
UNASSIGNED: A combined experimental and clinical study was conducted. The Quanta Cyber: Ho 150 with a 550 μm Quanta optical fiber was utilized in all set-ups. Ablation rates for soft and hard artificial stones were tested in vitro using 100 W and 20 W power settings. In the experiment, a porcine bladder was used. The optical fiber was inserted through a rigid cystoscope, whilst a K-type thermocouple was inserted in the bladder dome. The tested high-power settings were 152 W, 120 W and 105 W. In every trial, the lasing time was over 60 s. In the clinical study, 35 patients underwent transurethral high-power bladder lithotripsy. Laser settings were set between 100 W and 150 W.
UNASSIGNED: Stone mass (stone weight) was significantly lower after stone ablation independently of the stone type or the laser settings. Significantly higher mass decrease and ablation rate were detected in high-power compared to low-power settings. In the experiment, the highest temperature recorded was 32°C at 152 W. At 120 W and 105 W, the peak temperatures didn\'t reach 30°C. In the clinical study, a stone-free rate of 100% and a mean operative time of 43 ± 18 min were reported. All patients stayed in the hospital for one day except for one who presented minor hematuria. Additional complications did not occur.
UNASSIGNED: Ho:YAG laser lithotripsy > 100 W is an effective, fast and safe modality for the treatment of bladder calculi.

OBJECTIVE: The risk of thermal damage increases with the introduction of high-power lasers during holmium laser lithotripsy. This study aimed to quantitatively evaluate the temperature change of renal calyx in the human body and the 3D printed model during high-power flexible ureteroscopic holmium laser lithotripsy and map out the temperature curve.
METHODS: The temperature was continuously measured by a medical temperature sensor secured to a flexible ureteroscope. Between December 2021 and December 2022, willing patients with kidney stones undergoing flexible ureteroscopic holmium laser lithotripsy were enrolled. High frequency and high-power settings (24 W, 80 Hz/0.3 J and 32 W, 80 Hz/0.4 J) were performed for each patient with room temperature (25 °C) irrigation. In the 3D printed model, we studied more holmium laser settings (24 W, 80 Hz/0.3 J, 32 W, 80 Hz/0.4 J and 40 W, 80 Hz/0.4 J) with warmed (37 °C) and room temperature (25 °C) irrigation.
RESULTS: Twenty-two patients were enrolled in our study. With 30 ml/min or 60 ml/min irrigation, the local temperature of the renal calyx did not reach 43 °C in any patient under 25 °C irrigation after 60 s laser activation. There were similar temperature changes in the 3D printed model with the human body under the irrigation of 25 °C. Under the irrigation of 37 °C, the temperature rise slowed down, but the temperature in the renal calyces was close to or even exceeded the 43 °C at the setting of 32 W, 30 ml/min and 40 W, 30 ml/min after continuing laser activation.
CONCLUSIONS: In the irrigation of 60 ml/min, the temperature in the renal calyces can still be maintained within a safe range after continuous activation of a holmium laser up to 40 W. However, continuous activation of 32 W or higher power holmium laser in the renal calyces for more than 60 s in the limited irrigation of 30 ml/min can cause excessive local temperature, in such situation room temperature perfusion at 25 ℃ may be a relatively safer option.

UNASSIGNED: Obstruction of a ureteroileal anastomosis after urinary diversion is an unpleasant situation for patients and clinicians alike.
UNASSIGNED: A 48-year-old man who underwent a radical cystectomy for muscle-invasive bladder cancer and urinary diversion using the Wallace technique complained of right back pain. Computed tomography showed right hydronephrosis. Cystoscopy via the ileal conduit revealed complete obstruction of the ureteroileal anastomosis. We performed a bilateral approach (antegrade and retrograde) to use the cut-to-the-light technique. A guidewire and 7Fr single J catheter could be inserted.
UNASSIGNED: The cut-to-the-light technique was useful for complete obstruction of the ureteroileal anastomosis, the length of which was <1 cm. Herein, we report on the cut-to-the-light technique with a literature review.

OBJECTIVE: To compare the efficacy of conventional low power and high power holmium: yttrium aluminum-garnet (Ho: YAG) laser lithotripsy settings during retrograde intrarenal surgery (RIRS).  METHODS: The prospective study was conducted in patients undergoing RIRS for renal stones less than 2 cm diameter. Pulsed Ho:YAG laser (Lumenis® Pulse TM P120 H) was used for laser lithotripsy and the patients were randomized into low power (LP) and high power (HP) laser lithotripsy settings groups. The lasing duration, total laser energy used (Joules), laser energy used to ablate 1 mm3 of stone (Joules/mm3), operative duration, stone ablation speed (mm3/s) and stone free rate were compared.
RESULTS: A total of 120 underwent RIRS with 63 and 57 patients in LP and HP group, respectively. Median stone volume and stone density were comparable between the groups. The total energy used and laser energy used to ablate 1mm3 of stone (Joules/mm3) were significantly higher in the HP group than in LP group (27.9 (16.4-46.2) J/ mm3 vs 9.7 (5.3-17.7) J/ mm3) (p < 0.01). Median (IQR) ablation speed were 0.8 (0.5-1.3) mm3/s and 0.6 (0.4-1) mm3/s in the LP and HP groups, respectively. The median lasing time, operative time and stone free rate were similar in both the groups.
CONCLUSIONS: The total energy used and J/mm3 were lower in the LP group than in HP group with similar lasing duration, operative duration, ablation speed and stone free rate for renal stones less than 2 cm.

UNASSIGNED: For the aging population, surgery for lumbar spinal canal stenosis (LSCS) requires minimally invasive procedures. Recently, trans-sacral epiduroscopic laser decompression for lumbar disc herniation has been reported with good results. In this study, we devised a new method to perform trans-sacral epiduroscopic laser ablation of the ligamentum flavum (LF), known to be the major cause of LSCS. Using a live pig, this study aims to evaluate the efficacy, safety, and drawbacks of this procedure.
UNASSIGNED: Using an epiduroscope, we observed intra-spinal canal structures and then examined the feasibility and problems of a decompression procedure to ablate the LF using holmium:YAG (Ho:YAG) laser. The pig was observed for behavioral changes and neurological deficits after the procedure. Histological analysis was performed to evaluate the amount of tissue ablation and damage to surrounding tissues.
UNASSIGNED: Although it was possible to partially ablate the LF using the Ho:YAG laser under epiduroscopy, it was difficult to maintain a clear field of view, and freely decompressing the target lesion has been a challenge. After the first two experiments, the pig neither showed abnormal behavior nor any signs of pain or paresis. However, in the third experiment, the pig died during the operation. On autopsy, no thermal or mechanical injury was noted around the ablated site, including the dura mater and nerve root. Histological analysis showed that the LF and lamina were deeply ablated as the laser power increased, and no damage was noted on surrounding tissues beyond a depth of 500 μm.
UNASSIGNED: Although Ho:YAG laser could ablate the ligamentum and bone tissues without causing damage to surrounding tissues, it was difficult to completely decompress the LF under epiduroscopy. This method is a potentially highly invasive procedure that requires caution in its clinical application and needs further improvement in terms of the instruments and techniques used.

BACKGROUND: Twin reversed arterial perfusion sequence is a rare complication of monochorionic multifetal pregnancies. In this syndrome, the acardiac twin has a nonfunctional heart, while the other twin, the pump twin, has normal development. The pump twin perfuses the acardiac twin and is therefore at risk for cardiac decompensation. In monoamniotic cases, the normal co-twin is also at risk of sudden death due to cord entanglement. Treatment consists of coagulation and transection of the acardiac\'s umbilical cord. We report the first intrauterine use in pregnancy of a Ho:yttrium aluminum garnet laser to safely and successfully transect the umbilical cord after Nd:yttrium aluminum garnet coagulation.
METHODS: A 30-year-old Caucasian woman was referred to our fetal-maternal medicine unit at 9 weeks gestation with a monochorionic-monoamniotic twin pregnancy complicated by an acardiac twin. After counseling, she opted for an elective intervention to minimize the risks to the pump twin. At 16 weeks, fetoscopy was performed using a single 2-mm entry port. Through this port, a 1.0-mm fetoscope and a 0.365-mm laser fiber were introduced. Under fetoscopic sight and ultrasound (Doppler) guidance, the umbilical cord of the acardiac twin was first coagulated by laser energy using a Nd:yttrium aluminum garnet laser and then, using the same fiber, transected using a Ho:yttrium aluminum garnet laser. The patient underwent cesarean section at 38 weeks and delivered a healthy baby.
CONCLUSIONS: We present the first report on intrauterine use of an Ho:yttrium aluminum garnet laser in human pregnancy. Ho:yttrium aluminum garnet laser energy can be successfully and safely used for umbilical cord transection and carries fewer risks than other methods of transection.

This review includes the facts of bladder treatment by means of laser technologies application in historical perspective. Advantages and disadvantages of different laser technologies were considered in comparison with the traditional TUR of the bladder wall.

BACKGROUND: Endocorporeal laser lithotripsy (EL) during flexible ureteroscopy (URS-f) often uses \"dusting\" settings with \"painting\" technique. The displacement velocity of the laser fiber (LF) at the stone surface remains unknown and could improve EL\'s ablation rates. This in vitro study aimed to define the optimal displacement velocity (ODV) for both holmium:yttrium-aluminium-garnet (Ho:YAG) and thulium fiber laser (Tm-Fiber).
METHODS: A 50W-TFL (IRE Polus®, Moscow, Russia) and a 30W-MH1-Ho:YAG laser (Rocamed®, Signes, Provence-Alpes-Côte d\'Azur, France), were used with 272 µm-Core-Diameter LF (Sureflex, Boston Scientific©, San Jose, CA, USA), comparing three TFL modes, \"fine dusting\" (FD: 0.05-0.15 J/100-600 Hz); \"dusting\" (D: 0.5 J/30-60 Hz); \"fragmentation\" (Fr: 1 J/15-30 Hz) and two Ho:YAG modes (D: 0.5 J/20 Hz, Fr: 1 J/15 Hz). An experimental setup consisting of immerged cubes of calcium oxalate monohydrate (COM) stone phantoms (Begostone Plus, Bego©, Lincoln, RI, USA) was used with a 2 s\' laser operation time. LF were in contact with the stones, static or with a displacement of 5, 10 or 20 mm. Experiments were repeated four times. Stones were dried and µ-scanned. Ablation volumes (mm3) were measured by 3D-segmentation.
RESULTS: ODV was higher in dusting compared to fragmentation mode during Ho:YAG lithotripsy (10 mm/s vs. 5 mm/s, respectively). With Tm-Fiber, dusting and fragmentation OVDs were similar (5 mm/s). Tm-Fiber ODV was lower than Ho:YAGs in dusting settings (5 mm/s vs. 10 mm/s, respectively). Without LF displacement, ablation volumes were at least two-fold higher with Tm-Fiber compared to Ho:YAG. Despite the LF-DV, we report a 1.5 to 5-fold higher ablation volume with Tm-Fiber compared to Ho:YAG.
CONCLUSIONS: In dusting mode, the ODVTm-Fiber is lower compared to ODVHo:YAG, translating to a potential easier Tm-Fiber utilization for \"painting\" dusting technique. The ODV determinants remain unknown. Dynamic ablation volumes are higher to static ones, regardless of the laser source, settings or LF displacement velocity.