Nanotechnology exhibits a wide range of applications in the domain of disease therapy, diagnosis, biological detection, and environmental safeguards. The cross-linked polymeric nanosponges (NSs) are a nanoscale drug carrier system with a 3D porous structure and high entrapment efficacy. NSs up to the fourth generation are currently accessible and can serve as a delivery system for both hydrophilic and hydrophobic drugs. The delivery system exhibits superiority over alternative methods due to its ability to achieve controlled and targeted drug delivery. The colloidal structure of NSs facilitates the encapsulation of a wide range of agents such as proteins and peptides, enzymes, antineoplastic drugs, volatile oil, vaccines, DNA, etc. NSs efficiently overcome the challenges associated with drug toxicity and poor aqueous solubility. NS formulations have been explored for various applications like gaseous encapsulation, enzyme immobilization, antifungal therapy, poison absorbent, water purification, etc. This review provides a comprehensive analysis regarding methods of synthesis, distinct polymeric NSs, mechanism of drug release, factors affecting NS development, applications, and patents filed in the field of NSs. Herein, the recently developed NS formulations, their potential in cancer therapy, and current progressions of NS for SARS-CoV-2 management are also deliberated with special attention, focusing on the significant challenges and future directions.

The use of novel active ingredients for the functional modification of chitosan nanoformulations has attracted global attention. In this study, chitosan has been functionalized via histidine to craft novel chitosan-histidine nanoformulation (C-H NF) using ionic gelation method. C-H NF exhibited elite physico-biochemical properties, influencing physiological and biochemical dynamics in Tomato. These elite properties include homogenous-sized nanoparticles (314.4 nm), lower PDI (0.218), viscosity (1.43 Cps), higher zeta potential (11.2 mV), nanoparticle concentration/ml (3.53 × 108), conductivity (0.046 mS/cm), encapsulation efficiency (53%), loading capacity (24%) and yield (32.17%). FTIR spectroscopy revealed histidine interaction with C-H NF, while SEM and TEM exposed its porous structure. Application of C-H NF to Tomato seedling and potted plants through seed treatment and foliar spray positively impacts growth parameters, antioxidant-defense enzyme activities, reactive oxygen species (ROS) content, and chlorophyll and nitrogen content. We claim that the histidine-functionalized chitosan nanoformulation enhances physico-biochemical properties, highlighting its potential to elevate biochemical and physiological processes of Tomato plant.

In this study, we synthesized and characterized a novel starch glutaraldehyde cross-linked hydrogel for drug release. The hydrogel exhibited excellent properties such as absorption capacity and drug release. By optimizing the cross-linking reaction using varying concentrations of glutaraldehyde and reaction time, we obtained a hydrogel with a three-dimensional network structure, superior swelling properties, and mechanical strength. The results revealed doxycycline sustained and controlled drug release over a prolonged period, which could be adjusted by altering the cross-linking density of the hydrogel. Overall, the starch glutaraldehyde cross-linked hydrogel shows great promise as a drug delivery system with controlled release properties, applicable in pharmaceuticals and tissue engineering.

Energy cane (Saccharum spp.) bagasse, a type of biomass waste, is often underutilized, burned, or left to dispose of itself. This research aimed to evaluate the potential of converting this bagasse into high-value cellulosic microfiber hydrogels (CMH) for water conservation and potted chili (Capsicum annuum) plant growth. CMH offers a biodegradable alternative to synthetic polyacrylamide (PA) hydrogels and provides the dual benefit of improved water use efficiency and reduced environmental impact due to their ability to naturally break down in the soil. In this study, CMH and PA hydrogels were compared for water retention value (WRV), and reswelling kinetics (RK), as well as their effects on plant height, leaf count, root-to-shoot ratios (R:S ratio), and soil moisture retention. Two versions of CMH, CMH65 and CMH60, were prepared with varying cellulose-chitosan ratios: 65:35 and 60:40, respectively. The hydrogels were tested at four concentrations (0, 0.5, 1.0, and 2.0% w/w) by being mixed in Promix® soil. Observations were recorded over a 16-day period without additional water. Also, the WRV of hydrogels at 240 min and RK (10-180 min) were compared over three swelling-deswelling cycles. The PA hydrogel exhibited higher WRV (exceeding 450%) compared to CMH (45%). However, PA led to reduced plant height, leaf count, and R:S ratio when compared to higher concentrations of CMH65 and CMH60. In general, CMH60 (0.5% and 2%) exhibited superior plant growth. All hydrogels exhibited a significant decrease (p < 0.05) in WRV across successive cycles. Notably, during cycle 2, both CMH65 and CMH60 peaked in WRV at 10 and 20 min, respectively, compared to cycle 1. This study demonstrates the potential of bagasse-derived hydrogels as a value-added product for water conservation and crop growth.

In the pursuit of highly efficient perovskite solar cells, spiro-OMeTAD has demonstrated recorded power conversion efficiencies (PCEs), however, the stability issue remains one of the bottlenecks constraining its commercial development. In this study, we successfully synthesize a novel self-polymerized spiro-type interfacial molecule, termed v-spiro. The linearly arranged molecule exhibits stronger intermolecular interactions and higher intrinsic hole mobility compared to spiro-OMeTAD. Importantly, the vinyl groups in v-spiro enable in situ polymerization, forming a polymeric protective layer on the perovskite film surface, which proves highly effective in suppressing moisture degradation and ion migration. Utilizing these advantages, poly-v-spiro-based device achieves an outstanding efficiency of 24.54 %, with an enhanced open-circuit voltage of 1.173 V and a fill factor of 81.11 %, owing to the reduced defect density, energy level alignment and efficient interfacial hole extraction. Furthermore, the operational stability of unencapsulated devices is significantly enhanced, maintaining initial efficiencies above 90 % even after 2000 hours under approximately 60 % humidity or 1250 hours under continuous AM 1.5G sunlight exposure. This work presents a comprehensive approach to achieving both high efficiency and long-term stability in PSCs through innovative interfacial design.

BACKGROUND: Acne vulgaris is a common skin condition that affects a significant percentage of adolescents, with scarring being one of its permanent complications. This study aims to compare the efficacy and safety of using botulinum toxin type A (BTA) in combination with cross-linked and non-cross-linked hyaluronic acid (HA) for the treatment of atrophic acne scars.
METHODS: Our study is a randomized, double-blind clinical trial conducted on 16 patients with atrophic acne scars. The patients were randomly assigned to one of two groups: one group received a single session of BTA and crossed link HA combination, while the other group received two sessions of BTA and non-crossed link HA, 1 month apart. The patients were followed up at 3 and 6 months after baseline to evaluate the number and area of fine and large pores and spots, scar grading, patient satisfaction, and complications.
RESULTS: The mean age of individuals in both the cross-linked HA and non-cross-linked HA groups was 32.75 ± 4.26 and 31.50 ± 8.48 years, respectively (p = 0.71). In terms of gender, three (37.5%) and seven (87.5%) individuals in the cross-linked and non-cross-linked HA groups were female, respectively (p = 0.11). There were no significant differences in the count and area of fine and large pores and spots between the two groups at baseline and the first follow-up session. However, in the second follow-up session, the non-cross-linked HA group had significantly better results than the cross-linked HA group in terms of large pores count and area (p = 0.01). In terms of changes over time, the non-cross-linked HA group showed significantly better improvements in the count and area of large pores compared to the cross-linked HA group (p = 0.03). Additionally, both groups experienced a significant decrease in the count and area of fine pores over time (p = 0.001), but the amount of changes was not statistically significant between the two groups (p = 0.06). Concerning acne grade, initially, 62.5% and 12.5% of cases in the cross-linked HA and non-cross-linked HA groups, respectively, had severe grades. However, in the last session, these percentages significantly decreased to 0% for both groups (p = 0.002 and 0.005, respectively). In terms of treatment complications, none of the patients experienced any adverse effects.
CONCLUSIONS: The study demonstrated that both cross-linked HA and non-cross-linked HA were effective in reducing acne severity and improving the appearance of pores and spots. The treatments had similar effects on fine pores, spots, and overall acne severity. However, non-cross-linked HA appeared to have a better result on large pores compared to cross-linked HA.

Pectin and alginate are well-established biopolymers used in natural film development. Single-polymer mucilage films were developed from freeze-dried native mucilage powder of two cultivars, \'Algerian\' and \'Morado\', and the films\' mechanical properties were compared to single-polymer pectin and alginate films developed from commercially available pectin and alginate powders. The casting method prepared films forming solutions at 2.5%, 5%, and 7.5% (w/w) for each polymer. Considerable variations were observed in the films\' strength and elasticity between the various films at different polymer concentrations. Although mucilage films could be produced at 5% (w/w), both cultivars could not produce films with a tensile strength (TS) greater than 1 MPa. Mucilage films, however, displayed > 20% elongation at break (%E) values, being noticeably more elastic than the pectin and alginate films. The mechanical properties of the various films were further modified by varying the pH of the film-forming solution. The various films showed increased TS and puncture force (PF) values, although these increases were more noticeable for pectin and alginate than mucilage films. Although single-polymer mucilage films exhibit the potential to be used in developing natural packaging, pectin and alginate films possess more suitable mechanical attributes.

Present study focuses on the use of a biodegradable and cost-effective cation exchanger for removal of Cr (VI) metal ions from water sources. Semi-IPN was prepared through grafting of acrylamide onto agar-polyvinyl alcohol backbone in presence of boric acid and ammonium per sulphate as crosslinker-initiator system. Graft copolymer was converted to cation exchanger through phosphorylation. Characterization was done using methods such as FTIR, SEM-EDX and XRD. Semi-IPN exhibited higher thermal resistance. The findings revealed that the optimum conditions for Cr (VI) removal are pH = 4.0; contact time (min) = 360; adsorbent dose (mg) = 125 and metal ion concentration(mg/L) =2. The adsorption kinetics of Cr (VI) ions are best fit by the pseudo second order kinetic with 0.99 R2 and Kf (rate constant) was found to be 0.97 thereby supporting the Freundlich isotherm. The adsorption isotherm models used in this study were consistent with the Freundlich model, but the pseudo second order model was the most accurate description of the adsorption kinetics. The present investigation showed an excellent potential with 85 % adsorption capacity for the removal of Cr (VI). Moreover, reusability studies showed that the cation exchanger can be used effectively up to four cycles.

Pectin and alginate satisfy multiple functional requirements in the food industry, especially relating to natural packaging formulation. The continuous need for economic and environmental benefits has promoted sourcing and investigating alternative biomaterials, such as cactus pear mucilage from the cladodes of Opuntia spp., as natural packaging alternatives. The structural and mechanical properties of mucilage, pectin and alginate films developed at a 5% (w/w) concentration were modified by treating the films with calcium (Ca) in the calcium chloride (CaCl2) form. Scanning electron microscopy (SEM) showed the 5% (w/w) \'Algerian\' and \'Morado\' films to display considerable microstructure variation compared to the 5% (w/w) pectin and alginate films, with calcium treatment of the films influencing homogeneity and film orientation. Treating the alginate films with a 10% (w/w) stock CaCl2 solution significantly increased (p < 0.05) the alginate films\' tensile strength (TS) and puncture force (PF) values. Consequently, the alginate films reported significantly higher (p < 0.05) film strength (TS and PF) than the pectin + Ca and mucilage + Ca films. The mucilage film\'s elasticity was negatively influenced by CaCl2, while the pectin and alginate films\' elasticity was positively influenced by calcium treatment. These results suggest that the overall decreased calcium sensitivity and poor mechanical strength displayed by \'the Algerian\' and \'Morado\' films would not make them viable replacements for the commercial pectin and alginate films unless alternative applications were found.

The rational fabrication of composite structures made of mixed components has shown great potential for boosting the energy density of supercapacitors. Herein, an elaborate hierarchical MOF-derived NiCo2S4@Mo-doped Co-LDH arrays hybrid electrode was fabricated through a step-wise method. By leveraging the synergistic effects of a uniform array of NiCo2S4 nanowires as the core and an MOF-derived porous shell, the NiCo2S4@Mo-doped Co-LDH hybrid electrode demonstrates an exceptional specific capacitance of 3049.3 F g-1 at 1 A g-1. Even at a higher current density of 20 A g-1, the capacitance remains high at 2458.8 F g-1. Moreover, the electrode exhibits remarkable cycling stability, with 91% of the initial capacitance maintained after 10,000 cycles at 10 A g-1. Additionally, the as-fabricated asymmetric supercapacitor (ASC) based on the NiCo2S4@Mo-doped Co-LDH electrode achieves an impressive energy density of 97.5 Wh kg-1 at a power density of 835.6 W kg-1. These findings provide a promising approach for the development of hybrid-structured electrodes, enabling the realization of high-energy-density asymmetric supercapacitors.