BACKGROUND: Acne vulgaris is a common skin condition that affects a significant percentage of adolescents, with scarring being one of its permanent complications. This study aims to compare the efficacy and safety of using botulinum toxin type A (BTA) in combination with cross-linked and non-cross-linked hyaluronic acid (HA) for the treatment of atrophic acne scars.
METHODS: Our study is a randomized, double-blind clinical trial conducted on 16 patients with atrophic acne scars. The patients were randomly assigned to one of two groups: one group received a single session of BTA and crossed link HA combination, while the other group received two sessions of BTA and non-crossed link HA, 1 month apart. The patients were followed up at 3 and 6 months after baseline to evaluate the number and area of fine and large pores and spots, scar grading, patient satisfaction, and complications.
RESULTS: The mean age of individuals in both the cross-linked HA and non-cross-linked HA groups was 32.75 ± 4.26 and 31.50 ± 8.48 years, respectively (p = 0.71). In terms of gender, three (37.5%) and seven (87.5%) individuals in the cross-linked and non-cross-linked HA groups were female, respectively (p = 0.11). There were no significant differences in the count and area of fine and large pores and spots between the two groups at baseline and the first follow-up session. However, in the second follow-up session, the non-cross-linked HA group had significantly better results than the cross-linked HA group in terms of large pores count and area (p = 0.01). In terms of changes over time, the non-cross-linked HA group showed significantly better improvements in the count and area of large pores compared to the cross-linked HA group (p = 0.03). Additionally, both groups experienced a significant decrease in the count and area of fine pores over time (p = 0.001), but the amount of changes was not statistically significant between the two groups (p = 0.06). Concerning acne grade, initially, 62.5% and 12.5% of cases in the cross-linked HA and non-cross-linked HA groups, respectively, had severe grades. However, in the last session, these percentages significantly decreased to 0% for both groups (p = 0.002 and 0.005, respectively). In terms of treatment complications, none of the patients experienced any adverse effects.
CONCLUSIONS: The study demonstrated that both cross-linked HA and non-cross-linked HA were effective in reducing acne severity and improving the appearance of pores and spots. The treatments had similar effects on fine pores, spots, and overall acne severity. However, non-cross-linked HA appeared to have a better result on large pores compared to cross-linked HA.

Based on carboxylated multi-walled carbon nanotubes (MWCNTs-COOH), a MWCNTs/PVDF conductive membrane was prepared by a vacuum filtration cross-linking method. The surface compositions and morphology of conductive membranes were studied by X-ray photoelectron spectroscopy and high-resolution field emission scanning electron microscopy, respectively. The effects of cross-linked polymeric polyvinyl alcohol (PVA) on the conductive membrane properties such as the porosity, pore size distribution, pure water flux, conductivity, hydrophilicity, stability and antifouling properties were investigated. Results showed that the addition of PVA to the MWCNTs/PVDF conductive membrane decreased the pure water flux, porosity and the conductivity. However, the hydrophilicity of the modified MWCNTs/PVDF conductive membrane was greatly improved, and the contact angle of pure water was reduced from 70.18° to 25.48° with the addition of PVA contents from 0 wt% to 0.05 wt%. Meanwhile, the conductive membranes with higher content had a relatively higher stability. It was found that the conductive functional layer of the conductive membrane had an average mass loss rate of 1.22% in the 30 min ultrasonic oscillation experiment. The tensile intensity and break elongation ratio of the conductive membrane are improved by the addition of PVA, and the durability of the conductive membrane with PVA was superior to that without PVA added. The electric assisted anti-fouling experiments of modified conductive membrane indicated that compared with the condition without electric field, the average flux attenuation of the conductive membrane was reduced by 11.2%, and the membrane flux recovery rate reached 97.05%. Moreover, the addition of PVA could accelerate the clean of the conductive membranes.

Vitamin E-stabilized cross-linked polyethylene has been touted to alleviate the negative effects of oxidation. Although it has demonstrated significant improvements in wear resistance, bio-tribology, and oxidative resistance, little is known about the effect of antioxidants and dosage of cross-linking on the mechanical strength. This study aimed to evaluate the mechanical properties of these novel materials, which are commonly used in orthopedic implants.
Samples of different polymers were prepared with various levels of cross-linking and with or without vitamin E-stabilization and then tested according to ASTM D695 and D638. The elastoplastic characteristics under compression and tension were compared between the groups.
Vitamin E-stabilized cross-linked polyethylene showed a significant increase in elastic modulus over other groups, with a maximum increase of 26% in compression and 40% in tension when compared to the highly cross-linked group without vitamin E stabilization. The elastoplastic behavior under compression differed to that in tension for all polymers, demonstrating the anisotropic characteristics of these polymers.
The lower mechanical strength of highly cross-linked polyethylene has been a complication with the use of this polymer in orthopedic liners. This current study suggests that vitamin E-stabilized cross-linked polyethylene could be a suitable alternative material for knee implants because of its improved strength in resisting external forces.

UNASSIGNED: Free radicals formed in the cross-linking process may over time alter the mechanical properties of highly cross-linked polyethylene. Vitamin E-infused highly cross-linked polyethylene was therefore developed to achieve low wear-rate and good mechanical properties in the long term.
UNASSIGNED: To present 6-year results from the initial randomised controlled trial.
UNASSIGNED: We measured wear and periacetabular bone remodelling in cementless total hip arthroplasty; 32- or 36-mm Biolox Delta heads and vitamin E-infused highly cross-linked polyethylene (E-Poly) were used. Markerless radiosterometric analysis measured the in vivo wear and dual energy x-ray absorptiometry was used to analyse bone remodelling in 40 hips at 6-year follow-up.
UNASSIGNED: In the proximal direction the wear for 32- and 36-mm heads was 0.15 mm (95% confidence interval [CI], 0.08-0.21) and 0.06 mm (95% CI, -0.002-0.12), respectively (p = 0. 015). However, between 3 months and 6 years (excluding the period of \"bedding in\"), the proximal wear for 32- and 36-mm heads was 0.10 mm (95% CI, 0.05-0.15) and 0.05 mm (95% CI, -0.01-0.11), respectively (p = 0.12). The annual proximal wear rate for 32- and 36-mm heads from 3 months to 6 years was 0.02 mm and 0.01 mm, respectively. There was no difference in bone remodelling around the cup from baseline to 6 years for the total material and no differences between study groups.
UNASSIGNED: Wear of this vitamin E-infused highly cross-linked polyethylene is still low at 6-year follow-up, with no significant difference in wear from 3 months to 6 years between 32- and 36-mm heads.

No previous studies comparing the clinical wear rates of the two different kinds of cross-linked ultra-high-molecular-weight polyethylene (XLPE), annealed and remelted, are available. We compared the creep and steady wear rates of 36 matched pairs (72 hips in total) adjusting for baseline characteristics with propensity score matching techniques. Zirconia femoral heads with 26-mm diameter were used in all cases. The femoral-head cup penetration was measured digitally on radiographs. Significantly greater creep (p=0.006) was detected in the remelted (0.234mm) than annealed (0.159mm) XLPE. However, no significant difference (p=0.19) was found between the steady wear rates (0.003 and 0.008mm/year, respectively) of the annealed and remelted XLPE. Multiple regression analyses showed that remelted XLPE is significant independent variable (p<0.001) that is positively associated with creep. However, the patient age and body weight, cup size, the liner thickness, cup inclination, follow-up periods, and postoperative Merle d\'Aubigné hip score had no significant effects (p>0.05) on the steady wear rates. No patients exhibited above the osteolysis threshold of 0.1mm/year, progressive radiolucencies, osteolysis, or polyethylene fracture. This　propensity-matched cohort study document no significant difference in wear resistant performances of annealed and remelted XLPE over an average period of 10 years.

Polyethylene particle-induced osteolysis is the primary limitation in the long-term success of total joint replacement with conventional ultra high molecular weight polyethylene (UHMWPE). Highly cross-linked polyethylene (HXLPE) and vitamin E-doped cross-linked polyethylene (VE-HXLPE) have been developed to increase the wear resistance of joint surfaces. However, very few studies have reported on the incidence of particle-induced osteolysis for these novel materials. The aim of this study was to use a particle-induced osteolysis animal model to compare the in vivo biological response to different polymer particles. Three commercially available polymers (UHMWPE, HXLPE, and VE-HXLPE) were compared. Osseous properties including the bone volume relative to the tissue volume (BV/TV), trabecular thickness (Tb. Th), and bone mineral density (BMD) were examined using micro computed tomography. Histological analysis was used to observe tissue inflammation in each group. This study demonstrated that the osseous properties and noticeable inflammatory reactions were obviously decreased in the HXLPE group. When compared with the sham group, a decrease of 12.7% was found in BV/TV, 9.6% in BMD and 8.3% in Tb.Th for the HXLPE group. The heightened inflammatory response in the HXLPE group could be due to its smaller size and greater amount of implanted particles. Vitamin E diffused in vivo may not affect the inflammatory and osteolytic responses in this model. The morphological size and total cumulative amount of implanted particles could be critical factors in determining the biological response.