Giant cell tumor affecting distal radius has been considered more aggressive, as compared to its counterparts in other locations. While resection has been advocated as the treatment of choice with lower rates of recurrence, curettage has reportedly led to superior functional outcomes. This retrospective study aimed to evaluate the functional and oncological outcomes of patients managed for GCT distal radius by either extended intralesional curettage (EIC) or resection and arthrodesis with radialisation of ulna (RRU), with respect to rates of local recurrence and function. Twenty-four patients operated for giant cell tumor of distal radius by a single surgeon from 2011 to 2021, were included in the study. The demographic, clinico-radiological, and surgical details were recorded and analyzed, as were the functional and oncological outcomes. At a median (IQR) follow-up of 6.3 years (range 2 years to 15.9 years), the rate of recurrence in curettage was found to be higher than that in resection but was not statistically significant (35.7% vs 20%, p > 0.05). Patients managed elsewhere and then presented to us for recurrence had a higher rate of local recurrence (66.6%, p = 0.01). Average time to recurrence was 14 months (range 2-24 months). On final follow-up, patients in curettage group had better functional outcomes in terms of grip strength and range of motion. Mean Modified Mayo Wrist score and MSTS score were 78.2 and 25.63, respectively, for EIC group and 69.6 and 25.75, respectively, for RRU group. Extended intralesional curettage resulted in an earlier rehabilitation with a mobile wrist and acceptable disease control when compared with resection and arthrodesis with radialisation of ulna.

OBJECTIVE: This study investigated the clinical and functional outcomes of children with distal both-bone forearm fractures treated by fixation of the radius only compared to fixation of both the radius and ulna.
METHODS: A total of 71 patients from two centres with distal both-bone forearm fractures (30 in the ulna-yes group, 41 in the ulna-no group) who underwent closed reduction and percutaneous pinning treatment were retrospectively analysed. Operation duration, number of fluoroscopic exposures, loss of reduction rate and angulation based on radiographic assessment were compared between the two groups. Evaluation of wrist function including Gartland-Werley Score and Mayo Wrist Score were compared at the last follow-up.
RESULTS: Ulna angulation upon bone healing on the posteroanterior and the lateral plane of ulna-no group (6.11 ± 1.56°; 6.51 ± 1.69°) was significantly greater than that of ulna-yes group (4.49 ± 1.30°; 5.05 ± 2.18°) (p < 0.05). No significant difference was found in the loss of reduction rate between ulna-yes group (6.67%, 2/30) and the ulna-no group (4.88%, 2/41) (p > 0.05). At last follow-up, no significant difference was found between the Gartland-Werley Scores of the ulna-yes group (1.83 ± 3.25, range: 0-16) and ulna-no group (1.85 ± 2.72, range: 0-11.5) (p > 0.05). No significant difference was found between the Mayo Wrist Scores of the ulna-yes group (92.60 ± 6.20) and ulna-no group (92.15 ± 7.58) (p > 0.05).
CONCLUSIONS: For distal both-bone forearm fractures in children, fixation of only the radius appears to be a viable method with equivalent clinical outcomes compared to fixation of both the radius and ulna.

BACKGROUND: A corrective radius osteotomy is often performed in patients with a symptomatic distal radius malunion. In 3D-planned osteotomies, the unaffected radius is mirrored over the malunited radius after adjusting for left-right length differences using both ulnae. This approach assumes that ulnar length differences in a malunion population are similar to those in a healthy population. This study was conducted to analyze the difference in ulnar length in a distal radius malunion population and to assess the potential influence of age, sex, or malunion side on this difference.
METHODS: We evaluated 65 adult patients with distal radius malunion using bilateral forearm CT scans. 3D models of both ulnae were constructed, and length differences were determined along a standardized length axis. The results were compared to two populations without a radius malunion.
RESULTS: The average absolute ulnar length difference was 2.57 mm (SD 1.81), which was comparable to the two healthy populations. This difference was not significantly affected by age, sex, or malunion side.
CONCLUSIONS: This study demonstrated that using the ulnar length difference to correct for radial length difference in the current 3D planning process, before using the contralateral radius as a template for a corrective osteotomy in patients with radius malunion, is safe.

Hastelloy B2 is a high-performance nickel-molybdenum alloy and has been used in micro reactor, pump, pipe, and corrosion-resistant equipment. Square holes are required in the above application components. Although square holes are easily produced by spending more electrodes wear in Electrical Discharge Machining (EDM). Moreover, the square hole with small electrode wear achieved is a challenging task in thermal machining. Hence, in this work, the effects of EDM process parameters on electrode taper angle, electrode radius, electrode wear length and cutting time of Hastelloy B2 are studied. Taguchi based VišekriterijumskoKompromisnoRangiranje (VIKOR) method is used to find the optimum process parameters and compared with Taguchi based Grey Relational Analysis (GRA) method for validation. The results showed that current and pulse duration greatly affects the electrode wear out surface and edges. The square electrodes with sharp edges and surfaces are fully transformed into hemispherical shapes at electrode ends due to an unstable spark with diffusion of heat. Also, the VIKOR method provides an alternative multi-criteria optimization method that enhances the process performance over the grey relational analysis due to comparability, uniqueness, assessment and prediction.

BACKGROUND: Studies have shown an association between medial meniscus posterior root tears (MMPRT) and morphologic characteristics of the bone. However, the association between distal femoral bone morphology and MMPRT, particularly the medial femoral posterior condyle, is poorly understood. Our study aimed to determine the association between the morphologic characteristics of the medial posterior femoral condyle and MMPRT.
METHODS: A retrospective case-control study was performed from January 2021 to January 2022. After screening based on the inclusion and exclusion criteria, two matched groups were analyzed: the MMPRT group and the isolated lateral meniscus tears group. The hip-knee-ankle angle (HKA) and Kellgren-Lawrence grade (KLG) were measured on radiographs; the medial tibial slope angle (MTSA), medial tibial plateau depth (MTPD), and radius of the medial femoral posterior condyle (RMFPC) were measured on magnetic resonance imaging (MRI) in both groups. The area under the curve (AUC) and the best cutoff value for predicting MMPRT were calculated by using receiver operating characteristic (ROC) curve analysis.
RESULTS: The final analysis included a total of 174 patients (87 MMPRT patients and 87 controls). Significant differences were shown in the RMFPC (17.6 ± 1.0 vs. 16.2 ± 1.0, p < 0.01) and MTSA (6.4 ± 2.0 vs. 4.0 ± 1.3, p < 0.01), which were larger than those of the control group. The MTPD (1.8 ± 0.6 vs. 2.9 ± 0.7, p < 0.01) and HKA (175.4 ± 2.2 vs. 179.0 ± 2.7, p < 0.01) of the injury group were significantly different from the control group, and both were lower than the control group. However, between the MMPRT and control groups on the KLG (2.3 ± 0.6 vs. 2.2 ± 0.6, p = 0.209), there was no statistically significant difference. Among them, the RMFPC cutoff value was calculated to be 16.8 mm by ROC curve analysis, and the sensitivity and specificity were both 81.61%.
CONCLUSIONS: This study demonstrated that larger RMFPC, MTSA, smaller MTPD, and HKA were all associated with MMPRT, and RMFPC ≥ 16.8 mm was considered as a significant risk factor for MMPRT.

BACKGROUND: In an ageing population, low impact fragility fractures are becoming increasingly common. However, fracture risk can be reduced where low bone density can be identified at an early stage. In this study we aim to demonstrate that IBEX Bone Health (IBEX BH) can provide a clinically useful prediction from wrist radiographs of aBMD and T-score at the ultra-distal (UD) and distal-third (DT) regions of the radius.
METHODS: A 261-participant single-centre, non-randomised, prospective, study was carried out to compare a) IBEX BH, a quantitative digital radiography software device, to b) Dual-energy X-ray Absorptiometry (DXA). A total of 257 participants with wrist digital radiograph (DR), forearm DXA pairs were included in the analysis after exclusions.
RESULTS: The adjusted R2 value for IBEX BH outputs to the radial areal bone mineral density (aBMD) produced by a GE Lunar DXA system for the UD region is 0.87 (99% Confidence Interval (CI) [0.84, 0.89]). The adjusted R2 value for IBEX BH outputs to aBMD for the DT region is 0.88 (99% CI [0.85, 0.90]). The Area Under the Receiver Operating Characteristic curve (AUC) for the forearm T-score ≤  - 2.5 risk prediction model at the UD region is 0.95 (99% CI [0.93, 0.98]). The AUC for the forearm T-score ≤  - 2.5 risk prediction model at the DT region is 0.98 (99% CI [0.97, 0.99]).
CONCLUSIONS: From a DR of the wrist, IBEX BH provides a clinically useful i) estimate of aBMD at the two regions of interest on the radius and ii) risk prediction model of forearm T-score ≤  - 2.5 at the UD and DT regions.

Elbow computerized tomography (CT) scans have been widely applied for describing elbow morphology. To enhance the objectivity and efficiency of clinical diagnosis, an automatic method to recognize, segment, and reconstruct elbow joint bones is proposed in this study. The method involves three steps: initially, the humerus, ulna, and radius are automatically recognized based on the anatomical features of the elbow joint, and the prompt boxes are generated. Subsequently, elbow MedSAM is obtained through transfer learning, which accurately segments the CT images by integrating the prompt boxes. After that, hole-filling and object reclassification steps are executed to refine the mask. Finally, three-dimensional (3D) reconstruction is conducted seamlessly using the marching cube algorithm. To validate the reliability and accuracy of the method, the images were compared to the masks labeled by senior surgeons. Quantitative evaluation of segmentation results revealed median intersection over union (IoU) values of 0.963, 0.959, and 0.950 for the humerus, ulna, and radius, respectively. Additionally, the reconstructed surface errors were measured at 1.127, 1.523, and 2.062 mm, respectively. Consequently, the automatic elbow reconstruction method demonstrates promising capabilities in clinical diagnosis, preoperative planning, and intraoperative navigation for elbow joint diseases.

BACKGROUND: The Sauvé-Kapandji (S-K) method is a surgical procedure performed for chronic deformities of the distal radial ulnar joint (DRUJ). Changes to the joint contact surface from pre- to postoperatively under physiological in vivo conditions have not yet been determined for this useful treatment. The aim of the present study was therefore to compare the articular contact area of the wrist joint between before and after the S-K method for DRUJ disorders.
METHODS: The SK method was performed for 15 patients with DRUJ osteoarthritis and ulnar impaction syndrome. We calculated the Mayo Wrist Score as the patient\'s clinical findings and created 3-dimensional bone models of cases in which the S-K method was performed and calculated the contact area and shift in the center of the contact area using customized software.
RESULTS: The Mean modified Mayo Wrist Score improved significantly from 60.3 preoperatively to 80.3 postoperatively (P < 0.01). Scaphoid contact area to the radius increased significantly from 112.6 ± 37.0 mm2 preoperatively to 127.5 ± 27.8 mm2 postoperatively (P = 0.03). Lunate contact area to radius-ulna was 121.3 ± 43.3 mm2 preoperatively and 112.5 ± 37.6 mm2 postoperatively, but this decrease was not significant (P = 0.38). Contact area ratio of scaphoid to lunate increased significantly from 1.01 ± 0.4 preoperatively to 1.20 ± 0.3 postoperatively (P = 0.02). Postoperative translations of the center of the scaphoid and lunate contact areas were decomposed into ulnar and proximal directions. Ulnar and proximal translation distances of the scaphoid contact area were 0.8 ± 1.7 mm and 0.4 ± 0.6 mm, respectively, and those of the lunate contact area were 1.1 ± 1.7 mm and 0.4 ± 1.1 mm, respectively. This study revealed changes in wrist contact area and center of the contact area before and after the S-K method.
CONCLUSIONS: These results may accurately indicate changes in wrist joint contact area from pre- to postoperatively using the S-K method for patients with DRUJ disorder. Evaluation of changes in contact area due to bone surface modeling of the wrist joint using 3DCT images may be useful in considering surgical methods.

UNASSIGNED: This study aimed to examine the incidence of distal radius fractures in patients aged 55 and above who had also experienced hip fractures. Osteoporosis-associated fractures, particularly hip fractures, are common and serious in older individuals with reduced bone density. Previous research has suggested a relationship between hip fractures and distal radius fractures.
UNASSIGNED: The study included patients over 55 years old who had presented with hip fractures at Akhtar Hospital in the past five years. Patients with a history of hip fractures more than five years before experiencing the distal radius fracture were excluded. Personal information was extracted from medical records, and the collected data were analyzed in SPSS software using statistical methods, such as t-tests and paired t-tests.
UNASSIGNED: This study involved 1,745 patients with hip fractures and 183 individuals without fractures. The average age of the patients was 75.8±10.4 years old, with the majority being female (59.6%). Among the hip fractures, 59.6%, 34.5%, and 5.9% were intertrochanteric fractures, neck of femur fractures, and subtrochanteric fractures, respectively. Overall, 15.8% of individuals with hip fractures also had distal radius fractures. The average age and gender distribution of the patients were similar in both groups, with no significant difference. However, the prevalence of distal radius fractures was significantly higher in the hip fracture group, compared to the control group.
UNASSIGNED: It was found that individuals over the age of 55 with distal radius fractures, especially females, are more susceptible to hip fractures. Distal radius fractures have a significant impact on the occurrence of hip fractures in patients. Therefore, older individuals with osteoporosis should be cautious and avoid high-risk activities that could lead to falls and fractures.

The basis for increased fracture risk in type 2 diabetes (T2DM) is not well understood. In this multi-ethnic, population-based study (n = 565), we investigated bone microstructure, trabecular plate/rod morphology, and mineralization in women with T2DM (n = 175) with and without fracture using a second-generation HRpQCT and individual trabecula segmentation and mineralization (ITS; ITM). Covariate-adjusted aBMD was 3.0%-6.5% higher at all sites (all p<.005) in T2DM vs controls. By HRpQCT, T2DM had higher covariate-adjusted trabecular vBMD (5.3%-6.4%) and number (3.8%-5.1%) and greater cortical area at the radius and tibia. Covariate-adjusted cortical porosity was 10.0% higher at the tibia only in T2DM vs controls, but failure load did not differ. Among women with T2DM, those with adult atraumatic fracture (n = 59) had 5.2%-8.5% lower adjusted aBMD at all sites by DXA compared with those without fracture (n = 103). By HRpQCT, those with fracture had lower adjusted total vBMD and smaller cortical area (10.2%-16.1%), lower cortical thickness (10.5-15.8%) and lower cortical vBMD associated with 18.1 and 17.2% lower failure load at the radius and tibia, respectively (all p<.05); plate volume and thickness were 5.7% and 4.7% lower, respectively, (p<.05) while rod volume fraction was 12.8% higher in the fracture group at the tibia only. Sodium glucose cotransporter 2 inhibitor users (SGLT2i; n = 19), tended to have lower radial rod tissue mineral density by ITS (p=.06). GLP1 agonist users (n = 19) had trabecular deficits at both sites and higher cortical porosity and larger pores at the distal tibia. In summary, T2DM is associated with increased cortical porosity while those with T2DM and fracture have more marked cortical deficits and fewer trabecular plates associated with lower failure load.
Reasons for increased fracture risk in type 2 diabetes (T2DM) are not well-understood. We used a multi-ethnic, population-based cohort (n = 565), to study bone structure in women with T2DM (n = 175) using advanced imaging and analysis techniques. Participants with T2DM tended to have higher bone density and better structure by DXA and HRpQCT, respectively, at the radius and tibia; only cortical porosity was higher (worse) in participants with diabetes compared with those without diabetes but there was no difference in bone strength. Participants with T2DM and fracture had lower cortical parameters and bone strength compared with participants with T2DM without fracture at both sites. In summary, T2DM is associated with increased cortical porosity while those with T2DM and fracture have more marked cortical deficits associated with lower failure load.