OBJECTIVE: In this study, the effects of sex and birth type on growth performance, withers height (WH), radiographic measurements and selected hormone profiles in Gurcu goat kids were investigated.
METHODS: Twenty kids (single female = 5, single male = 5, twin female = 5, twin male = 5) were included in the study. Body weight (BW), WH, radiographic measurements (humerus length [HL], radius length [RL], proximal humerus epiphyseal plate width [HEP] and distal ulna epiphyseal plate width [UEP]) and biochemical analysis (for serum calcitonin, free triiodothyronine [FT3], free thyroxine [FT4], growth hormone [GH] and insulin-like growth factor-I [IGF-I]) were performed at 1, 3, 5, 7, 9 and 12 months of age.
RESULTS: BW was significantly higher in males starting from the seventh month compared to females (p < 0.05). HL was higher in males at seventh (p = 0.009) and ninth (p = 0.033) months, whereas RL was lower in twins at the third month (p = 0.021). UEP was wider in males at seventh (p = 0.008) and ninth (p = 0.036) months. Closure of HEP was observed in 65% of kids by the 12th month. Calcitonin was lower in twins at third (p = 0.045) and fifth (p = 0.006) months, with changes observed due to group and time effects (p < 0.05), whereas other hormones only changed with time (p < 0.05). Positive correlations were observed between BW, WH, HL, RL and IGF-I. There was a negative correlation between BW, WH, HL, RL, IGF-I and HEP, UEP, calcitonin, FT3, FT4, GH.
CONCLUSIONS: Sex and birth type in Gurcu goat kids may have an impact on growth performance, radiographic measurements and certain hormonal profiles.

Giant cell tumor affecting distal radius has been considered more aggressive, as compared to its counterparts in other locations. While resection has been advocated as the treatment of choice with lower rates of recurrence, curettage has reportedly led to superior functional outcomes. This retrospective study aimed to evaluate the functional and oncological outcomes of patients managed for GCT distal radius by either extended intralesional curettage (EIC) or resection and arthrodesis with radialisation of ulna (RRU), with respect to rates of local recurrence and function. Twenty-four patients operated for giant cell tumor of distal radius by a single surgeon from 2011 to 2021, were included in the study. The demographic, clinico-radiological, and surgical details were recorded and analyzed, as were the functional and oncological outcomes. At a median (IQR) follow-up of 6.3 years (range 2 years to 15.9 years), the rate of recurrence in curettage was found to be higher than that in resection but was not statistically significant (35.7% vs 20%, p > 0.05). Patients managed elsewhere and then presented to us for recurrence had a higher rate of local recurrence (66.6%, p = 0.01). Average time to recurrence was 14 months (range 2-24 months). On final follow-up, patients in curettage group had better functional outcomes in terms of grip strength and range of motion. Mean Modified Mayo Wrist score and MSTS score were 78.2 and 25.63, respectively, for EIC group and 69.6 and 25.75, respectively, for RRU group. Extended intralesional curettage resulted in an earlier rehabilitation with a mobile wrist and acceptable disease control when compared with resection and arthrodesis with radialisation of ulna.

OBJECTIVE: This study investigated the clinical and functional outcomes of children with distal both-bone forearm fractures treated by fixation of the radius only compared to fixation of both the radius and ulna.
METHODS: A total of 71 patients from two centres with distal both-bone forearm fractures (30 in the ulna-yes group, 41 in the ulna-no group) who underwent closed reduction and percutaneous pinning treatment were retrospectively analysed. Operation duration, number of fluoroscopic exposures, loss of reduction rate and angulation based on radiographic assessment were compared between the two groups. Evaluation of wrist function including Gartland-Werley Score and Mayo Wrist Score were compared at the last follow-up.
RESULTS: Ulna angulation upon bone healing on the posteroanterior and the lateral plane of ulna-no group (6.11 ± 1.56°; 6.51 ± 1.69°) was significantly greater than that of ulna-yes group (4.49 ± 1.30°; 5.05 ± 2.18°) (p < 0.05). No significant difference was found in the loss of reduction rate between ulna-yes group (6.67%, 2/30) and the ulna-no group (4.88%, 2/41) (p > 0.05). At last follow-up, no significant difference was found between the Gartland-Werley Scores of the ulna-yes group (1.83 ± 3.25, range: 0-16) and ulna-no group (1.85 ± 2.72, range: 0-11.5) (p > 0.05). No significant difference was found between the Mayo Wrist Scores of the ulna-yes group (92.60 ± 6.20) and ulna-no group (92.15 ± 7.58) (p > 0.05).
CONCLUSIONS: For distal both-bone forearm fractures in children, fixation of only the radius appears to be a viable method with equivalent clinical outcomes compared to fixation of both the radius and ulna.

BACKGROUND: A corrective radius osteotomy is often performed in patients with a symptomatic distal radius malunion. In 3D-planned osteotomies, the unaffected radius is mirrored over the malunited radius after adjusting for left-right length differences using both ulnae. This approach assumes that ulnar length differences in a malunion population are similar to those in a healthy population. This study was conducted to analyze the difference in ulnar length in a distal radius malunion population and to assess the potential influence of age, sex, or malunion side on this difference.
METHODS: We evaluated 65 adult patients with distal radius malunion using bilateral forearm CT scans. 3D models of both ulnae were constructed, and length differences were determined along a standardized length axis. The results were compared to two populations without a radius malunion.
RESULTS: The average absolute ulnar length difference was 2.57 mm (SD 1.81), which was comparable to the two healthy populations. This difference was not significantly affected by age, sex, or malunion side.
CONCLUSIONS: This study demonstrated that using the ulnar length difference to correct for radial length difference in the current 3D planning process, before using the contralateral radius as a template for a corrective osteotomy in patients with radius malunion, is safe.

METHODS: We report a case of progressive angular deformity of the left wrist in a 4-year-old girl with a 2-year history of juvenile idiopathic arthritis (JIA)-oligoarthritis subtype (<4 joints affected) with inflammatory extensor tenosynovitis affecting the left wrist, who underwent a left distal radius osteotomy with tricortical allograft for angular correction and functional recovery. Six years postoperatively, the patient demonstrates a near-anatomic left wrist and has recovered full range of motion and function.
CONCLUSIONS: This case demonstrates how rare clinically devastating angular deformities in JIA may safely and effectively be surgically managed to promote normal, long-term, extremity function.

暂无摘要。

Hastelloy B2 is a high-performance nickel-molybdenum alloy and has been used in micro reactor, pump, pipe, and corrosion-resistant equipment. Square holes are required in the above application components. Although square holes are easily produced by spending more electrodes wear in Electrical Discharge Machining (EDM). Moreover, the square hole with small electrode wear achieved is a challenging task in thermal machining. Hence, in this work, the effects of EDM process parameters on electrode taper angle, electrode radius, electrode wear length and cutting time of Hastelloy B2 are studied. Taguchi based VišekriterijumskoKompromisnoRangiranje (VIKOR) method is used to find the optimum process parameters and compared with Taguchi based Grey Relational Analysis (GRA) method for validation. The results showed that current and pulse duration greatly affects the electrode wear out surface and edges. The square electrodes with sharp edges and surfaces are fully transformed into hemispherical shapes at electrode ends due to an unstable spark with diffusion of heat. Also, the VIKOR method provides an alternative multi-criteria optimization method that enhances the process performance over the grey relational analysis due to comparability, uniqueness, assessment and prediction.

CONCLUSIONS: The distal radioulnar joint (DRUJ) is vital to the stability and function of the wrist and forearm. The osseous morphology is variable and provides little stability. A complex of confluent soft tissues is the primary stabilizer; however, the contribution of each component has yet to be elucidated. It has become increasingly clear that the anatomic fixation of distal radius fractures restores DRUJ stability, obviating the need for additional DRUJ stabilization. This review will describe the anatomy and biomechanics of the DRUJ and discuss injury patterns, treatments, and clinical results.

BACKGROUND: Studies have shown an association between medial meniscus posterior root tears (MMPRT) and morphologic characteristics of the bone. However, the association between distal femoral bone morphology and MMPRT, particularly the medial femoral posterior condyle, is poorly understood. Our study aimed to determine the association between the morphologic characteristics of the medial posterior femoral condyle and MMPRT.
METHODS: A retrospective case-control study was performed from January 2021 to January 2022. After screening based on the inclusion and exclusion criteria, two matched groups were analyzed: the MMPRT group and the isolated lateral meniscus tears group. The hip-knee-ankle angle (HKA) and Kellgren-Lawrence grade (KLG) were measured on radiographs; the medial tibial slope angle (MTSA), medial tibial plateau depth (MTPD), and radius of the medial femoral posterior condyle (RMFPC) were measured on magnetic resonance imaging (MRI) in both groups. The area under the curve (AUC) and the best cutoff value for predicting MMPRT were calculated by using receiver operating characteristic (ROC) curve analysis.
RESULTS: The final analysis included a total of 174 patients (87 MMPRT patients and 87 controls). Significant differences were shown in the RMFPC (17.6 ± 1.0 vs. 16.2 ± 1.0, p < 0.01) and MTSA (6.4 ± 2.0 vs. 4.0 ± 1.3, p < 0.01), which were larger than those of the control group. The MTPD (1.8 ± 0.6 vs. 2.9 ± 0.7, p < 0.01) and HKA (175.4 ± 2.2 vs. 179.0 ± 2.7, p < 0.01) of the injury group were significantly different from the control group, and both were lower than the control group. However, between the MMPRT and control groups on the KLG (2.3 ± 0.6 vs. 2.2 ± 0.6, p = 0.209), there was no statistically significant difference. Among them, the RMFPC cutoff value was calculated to be 16.8 mm by ROC curve analysis, and the sensitivity and specificity were both 81.61%.
CONCLUSIONS: This study demonstrated that larger RMFPC, MTSA, smaller MTPD, and HKA were all associated with MMPRT, and RMFPC ≥ 16.8 mm was considered as a significant risk factor for MMPRT.

METHODS: A 32-year-old woman with bilateral Madelung deformity presented with severe pain and arthritis of the radiocarpal and distal radioulnar joints. At final follow-up, 17 months for the left and 12 months for the right wrist, she had excellent functional results with no pain. Range of motion was 30° of flexion and 30° of extension with full pronosupination.
CONCLUSIONS: There is paucity in the literature regarding salvage procedures in adults with this deformity. We demonstrate treatment with distal ulna excision and an radioscapholunate arthrodesis. This procedure may be indicated in Madelung deformity and proximal radiocarpal and distal radioulnar joint arthritis.