Orbital defects due to congenital causes, cancer, and trauma can compromise appearance and function, creating a deep psychological impact on an individual\'s life. The prosthetic rehabilitation of such patients is challenging. The objective of prosthetic treatment of an ocular defect is to provide a well-fitting ocular prosthesis that closely resembles the original eye, restoring the patient\'s self-confidence and social acceptance. Ocular prostheses can be customized or prefabricated. The challenge encountered with prefabricated eye prostheses is a poor fit. Customized prostheses exhibit better fit, aesthetic outcome, and comfort to the patient in the long term. The article describes a technique to fabricate an ocular prosthesis with a stock iris and customized sclera that is both functional and aesthetically pleasing.

UNASSIGNED: the present study aimed to establish an epidemiological profile of patients consulting the unit of maxillofacial prosthodontics in Rabat. Results deriving from this study will help enhance the quality of patient care in our center and can also serve as a comparison tool with other maxillofacial teams around the world.
UNASSIGNED: during 11 months all patients consulting the unit of maxillofacial prosthodontics in our center were included. We opted for a questionnaire with 3 variables: socio-demographics, clinical examination data, and the type of prosthetic treatment adopted. The study was conducted in the Department of Removable Prosthodontics in the Center of Consultation and Dental Treatment of Rabat Morocco (CCDTR) from September 2020 to July 2021.
UNASSIGNED: the study population consisted of 91 patients, with a majority of male patients at 53% (n=48). During our study period, the proportion of patients under one-year-old was predominant, accounting for 38.4% (n=35) of the total sample. Among the patients in the sample, 72.5% (n=66) had no profession, while 66% (n=60) had a low income. Regarding medical insurance, the majority of our patients, 85.5% (n=78), were covered by Public Health Insurance for the Low-income Population (PHILP). Among the total sample, 57.1% (n=52) consulted for a combination of pain function and aesthetics. Additionally, 61.5% (n=56) were referred by teaching hospitals. For the type of oro-facial defect, 52.7% (n=48) of the sample consisted of newborns with congenital facial cleft. Out of the 91 patients, 36 had maxillofacial tumors, with 47.6% (n=17) of them presenting squamous cell carcinoma. Furthermore, 63.7% (n=58) of the prosthetic treatments adopted involved presurgical orthopedic treatments for newborns with facial cleft.
UNASSIGNED: the study on the epidemiological profile of patients attending the maxillofacial prosthodontics unit at Ibn Sina University Hospital in Rabat, Morocco provides important insights. The findings highlight the predominance of male patients and the prevalence of oro-facial defects in newborns. Socioeconomic factors, such as low income and lack of profession, are significant considerations. The majority of patients are covered by the PHILP, indicating the importance of medical insurance. These findings contribute to improving healthcare planning and specialized care for this patient population.

It is a well-known saying that the eyes are \"windows to the soul.\" The absence or loss of any facial part, particularly the vision, can lead to severe physical as well as emotional trauma. Losing any part of the face causes the patient societal, physical, and psychological anguish. An ocular prosthesis aims to improve social acceptance and boost self-confidence by restoring the facial appearance. A pediatric dental specialist should be a part of the maxillofacial prosthesis team since maxillofacial prosthetic rehabilitation in young children can be challenging, especially with the less cooperative ones. The following case report describes these challenges in relation to a 5-year-old boy who had his eye enucleated due to trauma. The purpose of the case was to provide custom-built, acrylic ocular prostheses in as comfortable and atraumatic manner as possible by the maxillofacial prosthetic team.
UNASSIGNED: Bansod AV, Pisulkar S, Beri A, et al. Rehabilitation of an Ocular Defect Using a Custom Ocular Prosthesis in a Pediatric Patient. Int J Clin Pediatr Dent 2024;17(4):479-482.

OBJECTIVE: To evaluate the current evidence of digital workflow feasibility based on the data acquisition methods and the software tools used to fabricate intraoral prostheses for patients with partial or total maxillary and mandibular defects.
METHODS: An electronic search was performed in PubMed, SCOPUS, and Web of Science using a combination of relevant keywords: digital workflow, digital designing, computer-assisted design-computer aided manufacturing, 3D printing, maxillectomy, and mandibulectomy. The Joanna Briggs Institute Critical Appraisal Tool was used to assess the quality of evidence in the studies reviewed.
RESULTS: From a total of 542 references, 33 articles were selected, including 25 on maxillary prostheses and 8 on mandibular prostheses. The use of digital workflows was limited to one or two steps of the fabrication of the prostheses, and only four studies described a complete digital workflow. The most preferred method for data acquisition was intraoral scanning with or without a cone beam computed tomography combination.
CONCLUSIONS: Currently, the fabrication process of maxillofacial prostheses requires combining digital and conventional methods. Simplifying the data acquisition methods and providing user-friendly and affordable software may encourage clinicians to use the digital workflow more frequently for patients requiring maxillofacial prostheses.

In a rare condition known as vaginal agenesis, the uterus (womb) may develop only partially or not at all, while the vagina fails to develop altogether. It is common to diagnose vaginal agenesis, when a female does not start menstruation at puberty. This is a prenatal disorder that may also be linked to bone or kidney issues. Mullerian agenesis, Mullerian aplasia, and Mayer-Rokitansky-Kuster-Hauser (MRKH) syndrome are other names for the illness. Treatment modalities encompass surgical and nonsurgical interventions, including the utilization of prefabricated or customized vaginal stents for neovagina reconstruction and maintenance. This case report describes the development of a neovagina in a 27-year-old female diagnosed with vaginal agenesis, a characteristic of MRKH syndrome. A customized clear acrylic stent, designed to provide a resilient surface, serves as a straightforward and cost-efficient alternative for managing this condition. Significantly, it enhances patient\'s compliance and comfort during treatment, addressing both the physical and psychological ramifications of this congenital anomaly. This customized vaginal stent not only provides a practical solution but also contributes to enhancing the quality of life for individuals grappling with vaginal agenesis, thereby offering a promising avenue for addressing the multifaceted challenges associated with this condition.

The absence of any organ of the facial region causes an asymmetrical appearance. This asymmetrical appearance can cause social dilemmas for the patient. The maxillofacial technician, the prosthodontist, and the patient must work closely together to fabricate an epithesis. On the implants, a superstructure is first constructed. Most of it is made up of rings and a bar that joins the implants. The firm acrylic resin base of the epithesis is equipped with clips that serve as the epithesis\'s retention mechanism. The actual epithesis is made of silicone rubber. The epithesis has to be shaped and colored with extreme caution. An appropriate substitute is an auricular prosthesis that is implant-retained. Microtia, deformity, malformation, and loss of the external ear, either partially or completely, can result from a variety of inherited genetic conditions. To evaluate the symmetry of both ears, artificial intelligence (AI) software is used. An Instagram lens Gridset by crystalwavesxx was used to correct and verify the bilateral symmetry of the patient. This case report primarily focuses on the fabrication of implant-supported auricular prostheses using AI.

UNASSIGNED: The purpose of this comparative study in vitro was to evaluate the effect of organic and inorganic nanoparticles on colour stability, tear strength and hardness of maxillofacial silicone elastomer at baseline and when subjected to outdoor weathering for 6 months.
UNASSIGNED: A total of 240 specimens were fabricated using M511 platinum silicone which were divided into total 4 groups (n = 60) based on the type of nanoparticles (control, polytetrafuoroethylene [PTFE], titanium dioxide [TiO2], zinc oxide [ZnO]) added and each group was further divided into 3 subgroups (n = 20) for colour, tear strength (TS) and hardness (H) testing. The tests were conducted and data was obtained both before and after outdoor weathering of 6 months.
UNASSIGNED: Minimum colour change after weathering was observed in PTFE group (∆E = 2.23). TiO2 group showed maximum TS (12.01 N/mm) followed by PTFE group (10.85 N/mm) before weathering. After weathering, maximum TS was shown by TiO2 group (12.9 N/mm) and PTFE group (12.54 N/mm). TiO2 group showed maximum hardness (24.15 shore A) before weathering and PTFE group showed maximum hardness (33.43 shore A) after weathering.
UNASSIGNED: Within the limitations of this study, it can be concluded that the addition of polytetrafuoroethylene nanoparticles to the polymer enhances both the optical as well as mechanical properties and can be considered favourable for the extended life of the prosthesis.

Trauma, cancer, and congenital abnormalities are the three main causes of eye loss. A person\'s personal and professional life is left with functional, aesthetic, and psychological problems when they lose one eye. A customized ocular prosthesis made of heat-cured polymethylmethacrylate can be used to restore an eye defect. Fabrication of the customized ocular prosthesis has multiple steps including scleral plank fabrication, iris positioning, and characterization. This article\'s primary goal is to explain a novel method for iris positioning for better cosmetic outcomes.

BACKGROUND: Implantology, as a recognized therapeutic approach, is gaining prominence. The decision-making process and success of implant therapy are closely linked to patient knowledge and expectations. This study aims to explore the association between age and knowledge regarding oral implants.
METHODS: Participants were categorized into three age groups (ag): ag 1 (35-44 years), ag 2 (65-74 years), and ag 3 (75 years and older). A total of 400 participants per age group were randomly selected using data from the residents\' registration office of Berlin, Germany. Structured telephone interviews were conducted between 2016 and 2017, employing a 67-item questionnaire covering awareness, information level, cost estimation, attitudes, and experiences with oral implants.
RESULTS: Despite a low overall knowledge level across all age groups, there was no significant correlation between age and knowledge about oral implants. Awareness increased with age. Information sources varied, with friends, acquaintances, and dentists playing key roles. Participants expressed diverse opinions on implants, with durability and stability identified as crucial characteristics. Significant differences in knowledge were observed between age groups regarding awareness, information sources, and perceptions of dentists offering implants.
CONCLUSIONS: The study suggests a need for targeted educational programs, emphasizing age-appropriate information sources to enhance health literacy in oral implantology, particularly among older individuals. Educating physicians on oral implant basics is also crucial. Implementing these measures could empower individuals to make informed decisions about oral implant treatment, thereby contributing to improved oral health outcomes.

Background: The artistic techniques necessary to fabricate facial prostheses mainly depend on individual skill and are not a resource easily reproduced. Digital technology has contributed to improved outcomes, often combining analog and new digital techniques in the same workflow. Methods: This article aims to present an innovative workflow to produce a final colored 3D printed and facial prosthesis by UV-map color translation into colored resin 3D printing. A modified +ID Methodology was used to obtain 3D models with the calibrated 3D printable patient\'s skin color. No hands-on physical molding, manual sculpture, or intrinsic silicone coloration was used. Results: The outcome resulted in acceptable aesthetics, adaptation, and an approximate color match after extrinsic coloration. The patient reported good comfort and acceptance. Conclusions: A direct resin 3D printed prosthesis may be a viable alternative, especially for rapid delivery as an immediate prosthesis or an option when there is no experienced anaplastogist to manufacture a conventional prosthesis.