Foot-and-mouth disease (FMD) is a highly infectious and endemic disease in Lao PDR. However, surveillance is weak, and outbreaks are not routinely reported. To address this, serum samples were routinely collected from cattle and buffalo from provincial abattoirs between November 2021 and December 2022. A total of 2,663 serum samples were collected from large ruminants (n = 1,625 cattle; n = 1,038 buffalo) from 17 provinces. Samples were tested for specific antibodies directed against FMD non-structural protein (NSP) to determine the proportion of animals exposed to FMD virus. In addition to sampling from abattoirs, further independent data was collected to report clinical signs and outcomes from 94 districts in 12 northern provinces. These incident reports were recorded by district staff using a Google Form and summarised monthly in the National Animal Disease Reporting System. Information was collected on species, incident date, herd size, location and which clinical signs the animals presented. Overall, 46% of the tested animals returned a positive result using ID Screen® FMD NSP Competition ELISA. Results from serological testing were then compared with reported clinical signs from the same district. In districts reporting \'mouth problems\' (regardless of other clinical signs) the median FMD seroprevalence was 49.7%, compared to 31.6% in districts not reporting mouth problems (p = 0.021). This finding suggests that reporting clinical cases of \'mouth problems\' could be a potential predictor of FMD infection at a district level in cattle and buffalo in Lao PDR. Furthermore, in districts reporting \'fever\', \'mouth problems\', and \'nose/mouth secretions\' together, the median FMD seroprevalence was 46.2%, compared to 24.4% in districts not reporting these signs (p = 0.033). In districts reporting \'mouth problems\' and \'nose/mouth secretions\' the median FMD seroprevalence was 49.4%, compared to 25.5% in districts not reporting these signs (p = 0.037). In districts reporting both \'fever\' and \'mouth problems,\' the median FMD seroprevalence was 46.4% compared to 25% in districts not reporting these signs (p = 0.017). Based on serological data generated by abattoir surveillance, this study identified clinical signs most predictive of FMD seroprevalence. These novel findings can be used to guide passive surveillance efforts in the future specifically in northern Laos and help support improved FMD surveillance more broadly in FMD endemic countries in Southeast Asia.

African Swine Fever (ASF) disease transmission parameters are crucial for making response and control decisions when faced with an outbreak, yet they are poorly quantified for smallholder and village contexts within Southeast Asia. Whilst disease-specific factors - such as latent and infectious periods - should remain reasonably consistent, host, environmental and management factors are likely to affect the rate of disease spread. These differences are investigated using Approximate Bayesian Computation with Sequential Monte-Carlo methods to provide disease parameter estimates in four naïve pig populations in villages of Lao People\'s Democratic Republic. The villages represent smallholder pig farmers of the Northern province of Oudomxay and the Southern province of Savannakhet, and the model utilised field mortality data to validate the transmission parameter estimates over the course of multiple model generations. The basic reproductive number between-pigs was estimated to range from 3.08 to 7.80, whilst the latent and infectious periods were consistent with those published in the literature for similar genotypes in the region (4.72 to 6.19 days and 2.63 to 5.50 days, respectively). These findings demonstrate that smallholder village pigs interact similarly to commercial pigs, however the spread of disease may occur slightly slower than in commercial study groups. Furthermore, the findings demonstrated that despite diversity across the study groups, the disease behaved in a consistent manner. This data can be used in disease control programs or for future modelling of ASF in smallholder contexts.

Saltpetre (KNO3; potassium nitrate) is one of the major ingredients of gunpowder. Simplex saltpetre (total 126 samples) together with gunpowder (total 93 samples) commodities which are currently prevailing in local markets as used for wildlife hunting and rocket festivals (local name in Lao: Boun Ban Fai) were collected from throughout Lao PDR. Dual isotopic composition of nitrates (δ15N, δ18O) was analyzed by the microbial denitrification method. Binary plotting of the data was conducted to characterize the mode of formation. In Lao PDR, almost all the commodities were imported from neighbouring Thailand, and to a lesser extent from Israel. Binary plotting of δ15N vs. δ18O of nitrates shows their intrinsic origin manufactured by Haber-Bosch and subsequently Ostwald processes. We observed an inverse correlation (δ15Nnitrate: up to + 12 ‰; δ18Onitrate: down to + 15 ‰), deviating from the reservoir values (free air) of δ15N (dinitrogen; up to 0 ‰) and δ18O (oxygen; +23.5 ‰), interpreted this as an indication of isotope fractionation during manufacture. The most plausible interpretation for this is the fractionation associated with formation of NO following NO2 and finally NO3 products. A nearly comparable inverse relationship is also observed for nitrates in pyrotechnics manufactured in China.

The crater and proximal effects of the largest known young meteorite impact on Earth have eluded discovery for nearly a century. We present 4 lines of evidence that the 0.79-Ma impact crater of the Australasian tektites lies buried beneath lavas of a long-lived, 910-km3 volcanic field in Southern Laos: 1) Tektite geochemistry implies the presence of young, weathered basalts at the site at the time of the impact. 2) Geologic mapping and 40Ar-39Ar dates confirm that both pre- and postimpact basaltic lavas exist at the proposed impact site and that postimpact basalts wholly cover it. 3) A gravity anomaly there may also reflect the presence of a buried ∼17 × 13-km crater. 4) The nature of an outcrop of thick, crudely layered, bouldery sandstone and mudstone breccia 10-20 km from the center of the impact and fractured quartz grains within its boulder clasts support its being part of the proximal ejecta blanket.

In this paper, we measured band offsets for La2O3 prepared by atomic layer deposition on GaAs(111), (110), and (100) surfaces. La2O3 grows epitaxially on GaAs(111) with very low interfacial defect density and exhibits a band offset that is predicted for defect-free interfaces by the metal-induced gap state theory. On the other hand, the polycrystalline La2O3 deposited on GaAs(110) and (100) shows band offsets close to the values predicted for Fermi-level pinning. In this way, band offsets can qualitatively estimate interfacial defect levels.

Invasive non-typhoidal Salmonella (iNTS) disease is a well-described cause of mortality in children and human immunodeficiency virus (HIV)-infected adults in sub-Saharan Africa. Additionally, there is an ill-defined burden of iNTS disease in Southeast Asia.
Aiming to investigate the causative serovars of non-invasive and iNTS disease and their associated antimicrobial susceptibility profiles in the Lao People\'s Democratic Republic, we performed multilocus sequence typing and antimicrobial susceptibility profiling on 168 NTS (63 blood and 105 faecal) organisms isolated in Lao between 2000 and 2012.
Six different serovars were isolated from blood; Salmonella enterica serovar Enteritidis (n=28), S. enterica serovar Typhimurium (n=19) and S. enterica serovar Choleraesuis (n=11) accounted for >90% (58/63) of the iNTS disease cases. In contrast, the isolates from diarrhoeal faeces were comprised of 18 different serovars, the mostly commonly identified being S. enterica Typhimurium (n=28), S. enterica Weltevreden (n=14) and S. enterica Stanley (n=15). S. enterica Enteritidis and S. enterica Choleraesuis were significantly more associated with systemic disease than diarrhoeal disease in this patient group (p<0.001).
We find a differing distribution of Salmonella sequence types/serovars between those causing iNTS disease and non-invasive disease in Lao. We conclude that there is a small but not insignificant burden of iNTS disease in Lao. Further clinical and epidemiological investigations are required to assess mortality and the role of comorbidities such as HIV.

Orientia tsutsugamushi, which requires specialized facilities for culture, is a substantial cause of disease in Asia. We demonstrate that O. tsutsugamushi numbers increased for up to 5 days in conventional hemocultures. Performing such a culture step before molecular testing could increase the sensitivity of O. tsutsugamushi molecular diagnosis.

BACKGROUND: The objective of the present study was to specify an optimum force system for intrusion and extrusion of maxillary central incisor and to compare the effects of bracket positioning at different heights from the incisal edge in Labial Orthodontics (LaO) and Lingual Orthodontics (LiO).
METHODS: A mathematical model of maxillary central incisor with normal inclination was developed. Four cases of heights of bracket slot from incisal edge were considered both in LaO and LiO viz. 3mm, 4mm, 5mm and 6mm. Based on a mathematical model, an optimum force system consisting of an intrusive or extrusive force (F) and a moment (M) was devised and moment (M) to force (F) ratio (M:F ratio) was estimated in each case. Then, three-dimensional Computer Aided Design (CAD) models of incisor and surrounding structures were prepared. To validate an optimum force system, finite element analysis was carried out and force system with derived M:F ratio was applied in each case.
RESULTS: In finite element analysis, results were shown in the form of vector graph of nodal displacements along with undeformed and deformed models. The desired intrusion or extrusion of incisor was observed. Thus, force system devised from a mathematical model was validated with finite element analysis in each case.
CONCLUSIONS: To achieve intrusion or extrusion, M:F ratios required in LaO were same i.e. 8:1 for aforementioned heights of bracket slot from incisal edge but different in LiO i.e. 0:1, 1:1, 2:1 and 3:1 for the heights of 3mm, 4mm, 5mm and 6mm respectively.