Light quality not only directly affects the photosynthesis of green plants but also plays an important role in regulating the development and movement of leaf stomata, which is one of the key links for plants to be able to carry out normal growth and photosynthesis. By sensing changes in the light environment, plants actively regulate the expansion pressure of defense cells to change stomatal morphology and regulate the rate of CO2 and water vapor exchange inside and outside the leaf. In this study, Cucumis melo was used as a test material to investigate the mitigation effect of different red, blue, and green light treatments on short-term drought and to analyze its drought-resistant mechanism through transcriptome and metabolome analysis, so as to provide theoretical references for the regulation of stomata in the light environment to improve the water use efficiency. The results of the experiment showed that after 9 days of drought treatment, increasing the percentage of green light in the light quality significantly increased the plant height and fresh weight of the treatment compared to the control (no green light added). The addition of green light resulted in a decrease in leaf stomatal conductance and a decrease in reactive oxygen species (ROS) content, malondialdehyde MDA content, and electrolyte osmolality in the leaves of melon seedlings. It indicated that the addition of green light promoted drought tolerance in melon seedlings. Transcriptome and metabolome measurements of the control group (CK) and the addition of green light treatment (T3) showed that the addition of green light treatment not only effectively regulated the synthesis of abscisic acid (ABA) but also significantly regulated the hormonal pathway in the hormones such as jasmonic acid (JA) and salicylic acid (SA). This study provides a new idea to improve plant drought resistance through light quality regulation.

We study recombination processes in nitride LEDs emitting from 270 to 540 nm with EQE ranging from 4% to 70%. We found a significant correlation between the LEDs\' electro-optical properties and the degree of nanomaterial disorder (DND) in quantum wells (QWs) and heterointerfaces. DND depends on the nanoarrangement of domain structure, random alloy fluctuations, and the presence of local regions with disrupted alloy stoichiometry. The decrease in EQE values is attributed to increased DND and excited defect (ED) concentrations, which can exceed those of Shockley-Read-Hall defects. We identify two mechanisms of interaction between EDs and charge carriers that lead to a narrowing or broadening of electroluminescence spectra and increase or decrease EQE, respectively. Both mechanisms involve multiphonon carrier capture and ionization, impacting EQE reduction and efficiency droop. The losses caused by these mechanisms directly affect EQE dependencies on current density and the maximum EQE values for LEDs, regardless of the emission wavelength. Another manifestation of these mechanisms is the reversibility of LED degradation. Recombination processes vary depending on whether QWs are within or outside the space charge region of the p-n junction.

In this work, the production of novel multishell silver indium selenide quantum dots (QDs) shelled with zinc selenide and zinc sulfide through a multistep synthesis precisely designed to develop high-quality red-emitting QDs is explored. The formation of the multishell nanoheterostructure significantly improves the photoluminescence quantum yield of the nanocrystals from 3% observed for the silver indium selenide core to 27 and 46% after the deposition of the zinc selenide and zinc sulfide layers, respectively. Moreover, the incorporation of the multishelled QDs in a poly(methyl methacrylate) (PMMA) matrix via in situ radical polymerization is investigated, and the role of thiol ligand passivation is proven to be fundamental for the stabilization of the QDs during the polymerization step, preventing their decomposition and the relative luminescence quenching. In particular, the role of interface chemistry is investigated by considering both surface passivation by inorganic zinc chalcogenide layers, which allows us to improve the optical properties, and organic thiol ligand passivation, which is fundamental to ensuring the chemical stability of the nanocrystals during in situ radical polymerization. In this way, it is possible to produce silver-indium selenide QD-PMMA composites that exhibit bright red luminescence and high transparency, making them promising for potential applications in photonics. Finally, it is demonstrated that the new silver indium selenide QD-PMMA composites can serve as an efficient color conversion layer for the production of red light-emitting diodes.

Light-emitting diodes (LEDs) are an indispensable part of our daily life. After being studied for a few decades, this field still has some room for improvement. In this regard, perovskite materials may take the leading role. In recent years, LEDs have become a most explored topic, owing to their various applications in photodetectors, solar cells, lasers, and so on. Noticeably, they exhibit significant characteristics in developing LEDs. The luminous efficiency of LEDs can be significantly enhanced by the combination of a poor illumination LED with low-dimensional perovskite. In 2014, the first perovskite-based LED was illuminated at room temperature. Furthermore, two-dimensional (2D) perovskites have enriched this field because of their optical and electronic properties and comparatively high stability in ambient conditions. Recent and relevant advancements in LEDs using low-dimensional perovskites including zero-dimensional to three-dimensional materials is reported. The major focus of this article is based on the 2D perovskites and their heterostructures (i.e., a combination of 2D perovskites with transition metal dichalcogenides, graphene, and hexagonal boron nitride). In comparison to 2D perovskites, heterostructures exhibit more potential for application in LEDs. State-of-the-art perovskite-based LEDs, current challenges, and prospects are also discussed.

Many farms have been replacing traditional lighting sources with light-emitting diode (LED) bulbs because of technological modernization. We aimed to investigate the effects of incandescent lighting (IL) and LED lighting on Cobb 500 broiler chickens for six weeks. Production parameters (body weight, feed consumption, feed conversion ratio), calculated slaughter values (yield%, relative breast%, thigh%) and breast meat quality parameters (pH at 45 min and 24 h postmortem, color, drip loss, kitchen equipment losses, shear force, meat composition) were recorded. Non-stop recordings were used to analyze the behavior of the birds during several periods of rearing. The LED group was significantly better in the body weight parameter between week 1 and 5 and the feed conversion ratio between week 2 and 3. The most significant difference in behavior was observed in the middle of the rearing period. The chickens in the LED group spent more time eating, drinking and interacting, and rested less. There was no difference in the meat quality parameters; only shear force was significantly lower in the LED group (1781.9 g/s vs. 2098.8 g/s). According to our results, LED lighting can bring about positive changes in animal production efficiency, behavior and other important characteristics for meat consumers.

We investigated a flat-type p*-p LED composed of a p*-electrode with a local breakdown conductive channel (LBCC) formed in the p-type electrode region by applying reverse bias. By locally connecting the p*-electrode to the n-type layer via an LBCC, a flat-type LED structure is applied that can replace the n-type electrode without a mesa-etching process. Flat-type p*-p LEDs, devoid of the mesa process, demonstrate outstanding characteristics, boasting comparable light output power to conventional mesa-type n-p LEDs at the same injection current. However, they incur higher operating voltages, attributed to the smaller size of the p* region used as the n-type electrode compared to conventional n-p LEDs. Therefore, despite having comparable external quantum efficiency stemming from similar light output, flat-type p*-p LEDs exhibit diminished wall-plug efficiency (WPE) and voltage efficiency (VE) owing to elevated operating voltages. To address this, our study aimed to mitigate the series resistance of flat-type p*-p LEDs by augmenting the number of LBCCs to enhance the contact area, thereby reducing overall resistance. This structure holds promise for elevating WPE and VE by aligning the operating voltage more closely with that of mesa-type n-p LEDs. Consequently, rectifying the issue of high operating voltages in planar p*-p LEDs enables the creation of efficient LEDs devoid of crystal defects resulting from mesa-etching processes.

The use of artificial lighting during the incubation phase is a tool that has been studied with the aim of increasing the production rates and hatchability. Using this, this study aims to investigate the effects of the luminous incidence of white and red monochromatic light on the production and metabolism of broiler chicks subjected to low temperatures. A total of 315 eggs of Ross 708 heavy breeders were used. The eggs were distributed randomly, with 35 eggs per tray, totaling 105 eggs per incubator. The treatments were the following: incubation without the use of light; the use of white monochromatic light; and the use of red monochromatic light. The lamps used were of the LED type. The samples were distributed in the factorial completely randomized experimental design with position effect on the tray. Candling, egg weighing, calculating the probability of survival and egg weight loss were performed. Temperatures were recorded using a thermographic camera. At birth, three chicks per tray were euthanized for evaluation: weight with and without yolk residue, gastrointestinal tract biometry, and blood and liver biochemistry. Analyses were performed using the R computational program. It was observed that there was a significant effect of the treatments on the levels of calcium, phosphorus, cholesterol, amylase, glucose, urea and glutamate pyruvate transaminase on the biochemical profile of the blood and on the thermographic temperatures of the eggs; the experiment was kept at low temperatures resulting in thermal stress, with an average temperature of 34.5 °C. Therefore, the use of red and white monochromatic light in the artificial incubation process for brown-colored eggs is not recommended, because in the post-hatching phase, it promoted the metabolism dysregulation on the blood biochemical profile to control the differentiation in the wavelength of traditional incubation.

3D CsPbX3 inorganic perovskite materials have attracted much attention in optoelectronic devices because of their strong absorbance, high photoluminescent quantum yield, tunable band gap, and narrow emission bandwidth. However, their practical usefulness is limited due to their poor stability in ambient conditions. Here, we created photoluminescent 0D Cs4PbX6 (X = Br, Br/I) suspensions in toluene by adding a small amount of water. The photoluminescent 0D Cs4PbX6 perovskite was mixed with polymethylmethacrylate (PMMA) forming 0D Cs4PbX6/PMMA composite films with higher PL, stability, transparency, and transmittance than that of the 3D CsPbX3/PMMA composite films prepared separately. Moreover, the PL intensity maintains 90% of the initial value after 30 days in water, showing excellent water stability. The flexible white-light LED device prepared by the composite films illustrated good luminescence performance with color rendering index 74.77, chromaticity coordinates (0.32, 0.33), and color temperature 6997 K.
UNASSIGNED:

Recently, UVC LEDs, which emit deep ultraviolet light, have found extensive applications across various fields. This study demonstrates the design and implementation of thin films of three-dimensional photonic crystals (3D PhCs) as reflectors to enhance the light output power (LOP) of UVC LEDs. The 3D PhC reflectors were prepared using the self-assembly of silica nanospheres on a UVC LED lead frame substrate via the evaporation-induced method (side) and the gravitational sedimentation method (bottom), respectively. These PhCs with the (111) crystallographic plane were deposited on the side wall and bottom of the UVC LED lead frame, acting as functional materials to reflect UVC light. The LOP of UVC LEDs with 3D PhC reflectors at a driving current of 100 mA reached 19.6 mW. This represented a 30% enhancement compared to commercial UVC LEDs with Au-plated reflectors, due to the UVC light reflection by the photonic band gaps of 3D PhCs in the (111) crystallographic plane. Furthermore, after aging tests at 60 °C and 60% relative humidity for 1000 h, the relative LOP of UVC LEDs with 3D PhC reflectors decreased by 7%, which is better than that of commercial UVC LEDs. Thus, this study offers potential methods for enhancing the light output efficiency of commercial UVC light-emitting devices.

This work inspects the utilization of all-polymer solar cells (APSCs) in indoor applications under LED illumination, with a focus on boosting efficiency through simulation-based design. The study employs a SCAPS TCAD device simulator to investigate the performance of APSCs under white LED illumination at 1000 lux, with a power density of 0.305 mW/cm2. Initially, the simulator is validated against experimental results obtained from a fabricated cell utilizing CD1:PBN-21 as an absorber blend and PEDOT:PSS as a hole transportation layer (HTL), where the initial measured efficiency is 16.75%. The simulation study includes an examination of both inverted and conventional cell structures. In the conventional structure, where no electron transportation layer (ETL) is present, various materials are evaluated for their suitability as the HTL. NiO emerges as the most promising HTL material, demonstrating the potential to achieve an efficiency exceeding 27%. Conversely, in the inverted configuration without an HTL, the study explores different ETL materials to engineer the band alignment at the interface. Among the materials investigated, ZnS emerges as the optimal choice, recording an efficiency of approximately 33%. In order to reveal the efficiency limitations of these devices, the interface and bulk defects are concurrently investigated. The findings of this study underscore the significance of careful material selection and structural design in optimizing the performance of APSCs for indoor applications.