BACKGROUND: Breeding polled goats is a welfare-friendly approach for horn removal in comparison to invasive methods. To gain a comprehensive understanding of the genetic basis underlying polledness in goats, we conducted whole-genome sequencing of 106 Xinong Saanen dairy goats, including 33 horned individuals, 70 polled individuals, and 3 polled intersexuality syndrome (PIS) individuals.
METHODS: The present study employed a genome-wide association study (GWAS) and linkage disequilibrium (LD) analysis to precisely map the genetic locus underlying the polled phenotype in goats.
RESULTS: The analysis conducted in our study revealed a total of 320 genome-wide significant single nucleotide polymorphisms (SNPs) associated with the horned/polled phenotype in goats. These SNPs exhibited two distinct peaks on chromosome 1, spanning from 128,817,052 to 133,005,441 bp and from 150,336,143 to 150,808,639 bp. The present study identified three genome-wide significant SNPs, namely Chr1:129789816, Chr1:129791507, and Chr1:129791577, as potential markers of PIS-affected goats. The results of our LD analysis suggested a potential association between MRPS22 and infertile intersex individuals, as well as a potential association between ERG and the polled trait in goats.
CONCLUSIONS: We have successfully identified three marker SNPs closely linked to PIS, as well as several candidate genes associated with the polled trait in goats. These results may contribute to the development of SNP chips for early prediction of PIS in goats, thereby facilitating breeding programs aimed at producing fertile herds with polled traits.

Sheep horns are composed of bone and sheaths, and the BMPR1A gene is required for cartilage and osteogenic differentiation. Therefore, the BMPR1A gene may have a function related to the sheep horn, but its relationship with the sheep horn remains unclear. In this study, we first utilized RNA sequencing (RNA-seq) data to investigate the expression of the BMPR1A gene in different tissues and breeds of sheep. Second, whole-genome sequencing (WGS) data were used to explore the functional sites of the BMPR1A gene. Lastly, the allele-specific expression of the BMPR1A gene was explored. Our results indicate that BMPR1A gene expression is significantly higher in the normal horn groups than in the scurred groups. Importantly, this trend is consistent across several sheep breeds. Therefore, this finding suggests that the BMPR1A gene may be related to horn type. A total of 43 Single-Nucleotide Polymorphisms (SNPs) (F-statistics > 0.15) and 10 allele-specific expressions (ASEs) exhibited difference between the large and small horn populations. It is probable that these sites significantly impact the size of sheep horns. Compared to other polled species, we discovered ten amino acid sites that could influence horn presence. By combining RNA-seq and WGS functional loci results, we identified a functional site at position 40574836 on chromosome 25 that is both an SNP and exhibits allele-specific expression. In conclusion, we demonstrated that the BMPR1A gene is associated with horn type and identified some important functional sites which can be used as molecular markers in the breeding of sheep horns.

A cutaneous horn, referred to as a cornu cutaneum in Latin, presents as a mound of keratinizing epithelium. The etiology of the cutaneous horn is associated with the lesion at its base. In addition to numerous benign and malignant neoplasms, cutaneous horns may be related to infections and skin conditions. The features of a 22-year-old woman with a cutaneous horn associated with a recalcitrant verruca vulgaris on her left fifth toe are described. In addition, the characteristics of a 57-year-old man with an inverted follicular keratosis-related cutaneous horn on his upper lip are reported. In order of decreasing frequency, a cutaneous horn is most associated with either an actinic keratosis (25%), a squamous cell carcinoma (19%), a seborrheic keratosis (19%-20%), or a verruca vulgaris (18%). Adnexal neoplasms, epithelial lesions, fibrous lesions, granular cell tumors, hamartomas, histiocytic lesions, melanocytic nevus, premalignant keratoses, a subungual lesion, and vascular lesions comprise the benign neoplasms that have been observed at the base of a cutaneous horn. Dermatologic conditions that have been associated with a cutaneous horn include discoid lupus erythematosus (three patients) and one patient with either palmoplantar keratoderma, psoriasis, or sarcoidosis. Human papillomavirus infection presenting as a verruca vulgaris is the most commonly associated infection; pox virus-related molluscum contagiosum is another viral infection that is less often observed associated with a cutaneous horn. Leishmaniasis, rhinosporidiosis, and cutaneous tuberculosis are rare cutaneous horn-related infections. A malignant tumor-associated cutaneous horn is most frequently caused by squamous cell carcinoma; other less common cancers include basal cell carcinoma, sebaceous carcinoma, verrucous carcinoma, and malignant melanoma. A cancer-related cutaneous horn has only been described in two patients with Kaposi sarcoma and one patient with either Merkel cell carcinoma or Paget disease of the breast or metastatic renal cell carcinoma. In summary, a cutaneous horn is potentially related to a tumor, an infection, or a skin disorder; an adequate evaluation of the base of the cutaneous horn is usually required to establish the associated diagnosis.

Longitudinal-torsional composite ultrasonic vibration has been widely used in grinding. This paper aims to solve the problem that the resonance frequency deviates greatly from the theoretical design frequency and the vibration mode is poor when the horn is matched with a larger tool head. This paper presents how the longitudinal-torsional composite ultrasonic conical transition horn was designed and optimized by the transfer matrix theory and finite element simulation. For this purpose, the spiral groove parameters were optimized and selected by finite element simulation. Then, the modal analysis and transient dynamic analysis of the horn with grinding wheel were carried out to verify the correctness of the theoretical calculation. The impedance analysis and amplitude test of the horn with grinding wheel were carried out. The test results were in very good agreement with the theoretical and simulation results. Finally, the grinding experiment was carried out. The surface roughness of the workpiece in longitudinal-torsional ultrasonic vibration grinding was obviously reduced compared to that of ordinary grinding. All these obtained results demonstrate that the designed longitudinal-torsional composite ultrasonic horn has very good operational performance for practical applications.

In humans, variation of the ATP7A gene may cause cranial exostosis, which is similar to \"human horn,\" but the function of the ATP7A gene in sheep is still unknown. Tissue expression patterns and potential functional loci analysis of the ATP7A gene could help understand its function in sheep horn. In this study, we first identified tissue, sex, breed, and species-specific expression of the ATP7A gene in sheep based on the RNA-sequencing (RNA-seq) data. Second, the potential functional sites of the ATP7A gene were analyzed by using the whole genome sequencing (WGS) data of 99 sheep from 10 breeds. Last, the allele-specific expression of the ATP7A gene was explored. Our result showed the ATP7A gene has significantly higher expression in the big horn than in the small horn, and the ATP7A gene has high expression in the horn and skin, suggesting that this gene may be related to the horn. The PCA results show that the region around the ATP7A can distinguish horned and hornless groups to some extent, further indicating that the ATP7A may be related to horns. When compared with other species, we find seven ruminate specific amino acid sites of the ATP7A protein, which can be important to the ruminate horn. By analyzing WGS, we found 6 SNP sites with significant differences in frequency in horned and hornless populations, and most of these variants are present in the intron. But we still find some potential functional sites, including three missenses, three synonymous mutations, and four Indels. Finally, by combining the RNA-seq and WGS functional loci results, we find three mutations that showed allele-specific expression between big and small horns. This study shows that the ATP7A gene in sheep may be related to horn size, and several potential functional sites we identified here can be useful molecular markers for sheep horn breeding.

A cutaneous horn is a rare, hyperkeratotic, projecting lesion that can be mostly found in sun-exposed areas of the skin. The base of the lesions can reveal an underlying malignancy. They can also be associated with several benign or pre-malignant dermatologic conditions. A biopsy of the base of the lesion and histopathological analysis are needed to confirm the diagnosis. Management depends on the underlying disease; however, surgical excision is the preferred treatment method.

A cutaneous horn, sometimes referred to as cornu cutaneum, is a projection arising on the skin due to an overgrowth of the epidermal stratum corneum. This lesion is a clinical presentation of an underlying skin tumor. A woman with a verruca vulgaris-associated cutaneous horn is described. Cutaneous horns are often solitary and appear most commonly on the face, ears, and the dorsum of the hands of older patients. The most frequent tumors associated with cutaneous horns include actinic keratoses and seborrheic keratoses; however, cutaneous horns have also been observed overlying other benign and malignant tumors. In conclusion, a cutaneous horn is a common clinical feature; however, the diagnosis of the underlying skin lesion requires a biopsy that permits adequate microscopic evaluation of the associated tumor.

BACKGROUND: There is a long-term interest in investigating the genetic basis of the horned/polled phenotype in domestic goats. Here, we report a genome-wide association study (GWAS) to detect the genetic loci affecting the polled phenotype in goats.
RESULTS: We obtained a total of 13,980,209 biallelic SNPs, using the genotyping-by-sequencing data from 45 Jintang Black (JT) goats, which included 32 female and nine male goats, and four individuals with the polled intersex syndrome (PIS). Using a mixed-model based GWAS, we identified two association signals, which were located at 150,334,857-150,817,260 bp (P = 5.15 × 10- 119) and 128,286,704-131,306,537 bp (P = 2.74 × 10- 15) on chromosome 1. The genotype distributions of the 14 most significantly associated SNPs were completely correlated with horn status in goats, based on the whole-genome sequencing (WGS) data from JT and two other Chinese horned breeds. However, variant annotation suggested that none of the detected SNPs within the associated regions were plausible causal mutations. Via additional read-depth analyses and visual inspections of WGS data, we found a 10.1-kb deletion (CHI1:g. 129424781_129434939del) and a 480-kb duplication (CHI1:150,334,286-150,818,098 bp) encompassing two genes KCNJ15 and ERG in the associated regions of polled and PIS-affected goats. Notably, the 10.1-kb deletion also served as the insertion site for the 480-kb duplication, as validated by PCR and Sanger sequencing. Our WGS genotyping showed that all horned goats were homozygous for the reference alleles without either the structural variants (SVs), whereas the PIS-affected goats were homozygous for both the SVs. We also demonstrated that horned, polled, and PIS-affected individuals among 333 goats from JT and three other Chinese horned breeds can be accurately classified via PCR amplification and agarose gel electrophoresis of two fragments in both SVs.
CONCLUSIONS: Our results revealed that two genomic regions on chromosome 1 are major loci affecting the polled phenotypes in goats. We provided a diagnostic PCR to accurately classify horned, polled, and PIS-affected goats, which will enable a reliable genetic test for the early-in-life prediction of horn status in goats.

BACKGROUND: Hydroxyurea (HU) is a ribonucleotide diphosphate reductase inhibitor that interferes with the S phase of cell replication and inhibits DNA synthesis, with limited or no effect on RNA or protein synthesis. The cutaneous side effects of hydroxyurea treatment are diverse and frequent. Squamous cell carcinoma is one of the most challenging side-effect.
METHODS: The authors report the case of a healthy 59-year-old woman on long-term therapy with Hydroxyurea 500 mg daily for essential thrombocytosis, presented with a painless slow-growing lesion of the jaw that had persisted and increased in size for six months, the appearance of the lesion is correlated to the administration of the hydroxyurea treatment. Clinical examination revealed a large nodular lesion 4 × 4 cm with irregular borders of the right cheek, infiltrated into underlying tissue, the lesion extending to the free border of the right lower eyelid without sensory disturbances or diplopia. The surgery was indicated. The surgical procedure had the aim of the restoration of the anatomic landmarks after a large excision of the tumor and reconstruction of full-thickness eyelid defect with a local flap under general anesthesia.
CONCLUSIONS: Maxillofacial surgeons must be aware of the side effects of hydroxyurea including facial cancer, ulceration, etc. Rigorous follow-up of patients on hydroxyurea is required.

The purpose of this study was to investigate the effects of perioperative administration of oral meloxicam prior to and following the application of caustic paste to disbud neonatal dairy calves. Sixty-one 3-4-d-old Holstein heifer calves were randomly assigned to one of four treatment groups of 15-16 calves. The treatment groups were: 1) M1, caustic paste disbudding and oral meloxicam (45 mg) with a placebo 24 h later; 2) M2, treatment M1 followed by a second 45-mg dose of meloxicam 24 h later instead of placebo; 3) CONTROL, treatment M1 with placebo in place of meloxicam; and 4) SHAM, sham disbudding with placebo in place of meloxicam. Infrared thermography was used to quantify eye and horn bud temperatures. Pressure algometry was used to measure Mechanical nociceptive threshold (MNT) surrounding the horn bud. Average daily gain and body weight (BW) were obtained by weighing each animal throughout the study and calculating the changes over time. Plasma was collected and analyzed for cortisol and substance P concentrations. Substance P and cortisol decreased in all animals over time, regardless of treatment. Mean plasma substance P concentration across all time points was greater (P < 0.05) in the SHAM group than M1 or M2 but not different (P > 0.05) than the CONTROL group. The MNT and ocular temperatures decreased over time across all treatments (P < 0.05). Mean BW increased over time across all treatments (P < 0.05). A significant interaction (P < 0.05) between treatment and sampling time was observed at 12 h following treatment application for both mean horn bud temperature and the ratio between horn bud and ocular temperature. Overall, the results of this study suggest that meloxicam administration at a dose of 45 mg per animal may have limited influence as the primary modulator of pain and inflammatory response in calves that have been disbudded with caustic paste at 3 d of age.