BACKGROUND: Breeding polled goats is a welfare-friendly approach for horn removal in comparison to invasive methods. To gain a comprehensive understanding of the genetic basis underlying polledness in goats, we conducted whole-genome sequencing of 106 Xinong Saanen dairy goats, including 33 horned individuals, 70 polled individuals, and 3 polled intersexuality syndrome (PIS) individuals.
METHODS: The present study employed a genome-wide association study (GWAS) and linkage disequilibrium (LD) analysis to precisely map the genetic locus underlying the polled phenotype in goats.
RESULTS: The analysis conducted in our study revealed a total of 320 genome-wide significant single nucleotide polymorphisms (SNPs) associated with the horned/polled phenotype in goats. These SNPs exhibited two distinct peaks on chromosome 1, spanning from 128,817,052 to 133,005,441 bp and from 150,336,143 to 150,808,639 bp. The present study identified three genome-wide significant SNPs, namely Chr1:129789816, Chr1:129791507, and Chr1:129791577, as potential markers of PIS-affected goats. The results of our LD analysis suggested a potential association between MRPS22 and infertile intersex individuals, as well as a potential association between ERG and the polled trait in goats.
CONCLUSIONS: We have successfully identified three marker SNPs closely linked to PIS, as well as several candidate genes associated with the polled trait in goats. These results may contribute to the development of SNP chips for early prediction of PIS in goats, thereby facilitating breeding programs aimed at producing fertile herds with polled traits.

Sheep horns are composed of bone and sheaths, and the BMPR1A gene is required for cartilage and osteogenic differentiation. Therefore, the BMPR1A gene may have a function related to the sheep horn, but its relationship with the sheep horn remains unclear. In this study, we first utilized RNA sequencing (RNA-seq) data to investigate the expression of the BMPR1A gene in different tissues and breeds of sheep. Second, whole-genome sequencing (WGS) data were used to explore the functional sites of the BMPR1A gene. Lastly, the allele-specific expression of the BMPR1A gene was explored. Our results indicate that BMPR1A gene expression is significantly higher in the normal horn groups than in the scurred groups. Importantly, this trend is consistent across several sheep breeds. Therefore, this finding suggests that the BMPR1A gene may be related to horn type. A total of 43 Single-Nucleotide Polymorphisms (SNPs) (F-statistics > 0.15) and 10 allele-specific expressions (ASEs) exhibited difference between the large and small horn populations. It is probable that these sites significantly impact the size of sheep horns. Compared to other polled species, we discovered ten amino acid sites that could influence horn presence. By combining RNA-seq and WGS functional loci results, we identified a functional site at position 40574836 on chromosome 25 that is both an SNP and exhibits allele-specific expression. In conclusion, we demonstrated that the BMPR1A gene is associated with horn type and identified some important functional sites which can be used as molecular markers in the breeding of sheep horns.

Some typical defects like delamination, fiber fracture, non-uniform resin distribution and springback are inevitable as titanium-based thermoplastic FMLs are formed by general stamping process at elevated temperature due to the significant differences of various constituent materials in mechanical and thermal properties as well as deformation mechanism. Thus, a novel ultrasonic impact sizing/shaping process method was proposed in the present work, in which a stepped horn and impact tools with a cylindrical tip end was designed by means of vibration modal and harmonic response analysis, and the corresponding experiment setup was established to verify the process mentioned above. Moreover, ultrasonic impact tests were carried out for titanium-based FMLs stacked by titanium sheet, thermoplastic resin film and carbon fiber reinforced fabric to reveal their sizing/shaping mechanism and the effect of key process parameters such as ultrasonic amplitude, scanning speed of impact tool and its tip end diameter on the surface and interface characteristics of titanium-based FMLs. The research results show that the ultrasonic impact scheme with the ultrasonic amplitude of 12 μm, the scanning speed of impact tool within 2 mm/s ∼ 3 mm/s, the tip end diameter of impact tool within Ø4mm∼Ø6mm are proper for the ultrasonic impact sizing/shaping process of titanium-based FMLs.

The horns of bighorn sheep rams are permanent cranial appendages used for high energy head-to-head impacts during interspecific combat. The horns attach to the underlying bony horncore by a layer of interfacial tissue that facilitates load transfer between the impacted horn and underlying horncore, which has been shown to absorb substantial energy during head impact. However, the morphology and mechanical properties of the interfacial tissue were previously unknown. Histomorphometry was used to quantify the interfacial tissue composition and morphology and lap-shear testing was used to quantify its mechanical properties. Histological analyses revealed the interfacial tissue is a complex network of collagen and keratin fibers, with collagen being the most abundant protein. Sharpey\'s fibers provide strong attachment between the interfacial tissue and horncore bone. The inner horn surface displayed microscopic porosity and branching digitations which increased the contact surface with the interfacial tissue by approximately 3-fold. Horn-horncore samples tested by lap-shear loading failed primarily at the horn surface, and the interfacial tissue displayed non-linear strain hardening behavior similar to other soft tissues. The elastic properties of the interfacial tissue (i.e., low- and high-strain shear moduli) were comparable to previously measured values for the equine laminar junction. The interfacial tissue contact surface was positively correlated with the interfacial tissue shear strength (1.23 ± 0.21 MPa), high-strain shear modulus (4.5 ± 0.7 MPa), and strain energy density (0.38 ± 0.07 MJ/m3). STATEMENT OF SIGNIFICANCE: The bony horncore in bighorn sheep rams absorbs energy to reduce brain cavity accelerations and mitigate brain injury during head butting. The interfacial zone between the horn and horncore transfers energy from the impacted horn to the energy absorbing horncore but has been largely neglected in previous models of bighorn sheep ramming since interfacial tissue properties were previously unknown. This study quantified the morphology and mechanical properties of the horn-horncore interfacial tissue to better understand structure-property relationships that contribute to energy transfer during ramming. Results from this study will improve models of bighorn sheep ramming used to study mechanisms of brain injury mitigation and may inspire novel materials and structures for brain injury prevention in humans.

Beetles, despite their remarkable biodiversity and a long history of research, remain lacking in reference genomes annotated with structural variations in loci of adaptive significance. We sequenced and assembled high-quality chromosome-level genomes of four Hercules beetles which exhibit divergence in male horn size and shape and body colouration. The four Hercules beetle genomes were assembled to 11 pseudo-chromosomes, where the three genomes assembled using Nanopore data (Dynastes grantii, D. hyllus and D. tityus) were mapped to the genome assembled using PacBio + Hi-C data (D. maya). We demonstrated a striking similarity in genome structure among the four species. This conservative genome structure may be attributed to our use of the D. maya assembly as the reference; however, it is worth noting that such a conservative genome structure is a recurring phenomenon among scarab beetles. We further identified homologues of nine and three candidate-gene families that may be associated with the evolution of horn structure and body colouration respectively. Structural variations in Scr and Ebony2 were detected and discussed for their putative impacts on generating morphological diversity in beetles. We also reconstructed the demographic histories of the four Hercules beetles using heterozygosity information from the diploid genomes. We found that the demographic histories of the beetles closely recapitulated historical changes in suitable forest habitats driven by climate shifts.

A cutaneous horn, referred to as a cornu cutaneum in Latin, presents as a mound of keratinizing epithelium. The etiology of the cutaneous horn is associated with the lesion at its base. In addition to numerous benign and malignant neoplasms, cutaneous horns may be related to infections and skin conditions. The features of a 22-year-old woman with a cutaneous horn associated with a recalcitrant verruca vulgaris on her left fifth toe are described. In addition, the characteristics of a 57-year-old man with an inverted follicular keratosis-related cutaneous horn on his upper lip are reported. In order of decreasing frequency, a cutaneous horn is most associated with either an actinic keratosis (25%), a squamous cell carcinoma (19%), a seborrheic keratosis (19%-20%), or a verruca vulgaris (18%). Adnexal neoplasms, epithelial lesions, fibrous lesions, granular cell tumors, hamartomas, histiocytic lesions, melanocytic nevus, premalignant keratoses, a subungual lesion, and vascular lesions comprise the benign neoplasms that have been observed at the base of a cutaneous horn. Dermatologic conditions that have been associated with a cutaneous horn include discoid lupus erythematosus (three patients) and one patient with either palmoplantar keratoderma, psoriasis, or sarcoidosis. Human papillomavirus infection presenting as a verruca vulgaris is the most commonly associated infection; pox virus-related molluscum contagiosum is another viral infection that is less often observed associated with a cutaneous horn. Leishmaniasis, rhinosporidiosis, and cutaneous tuberculosis are rare cutaneous horn-related infections. A malignant tumor-associated cutaneous horn is most frequently caused by squamous cell carcinoma; other less common cancers include basal cell carcinoma, sebaceous carcinoma, verrucous carcinoma, and malignant melanoma. A cancer-related cutaneous horn has only been described in two patients with Kaposi sarcoma and one patient with either Merkel cell carcinoma or Paget disease of the breast or metastatic renal cell carcinoma. In summary, a cutaneous horn is potentially related to a tumor, an infection, or a skin disorder; an adequate evaluation of the base of the cutaneous horn is usually required to establish the associated diagnosis.

Longitudinal-torsional composite ultrasonic vibration has been widely used in grinding. This paper aims to solve the problem that the resonance frequency deviates greatly from the theoretical design frequency and the vibration mode is poor when the horn is matched with a larger tool head. This paper presents how the longitudinal-torsional composite ultrasonic conical transition horn was designed and optimized by the transfer matrix theory and finite element simulation. For this purpose, the spiral groove parameters were optimized and selected by finite element simulation. Then, the modal analysis and transient dynamic analysis of the horn with grinding wheel were carried out to verify the correctness of the theoretical calculation. The impedance analysis and amplitude test of the horn with grinding wheel were carried out. The test results were in very good agreement with the theoretical and simulation results. Finally, the grinding experiment was carried out. The surface roughness of the workpiece in longitudinal-torsional ultrasonic vibration grinding was obviously reduced compared to that of ordinary grinding. All these obtained results demonstrate that the designed longitudinal-torsional composite ultrasonic horn has very good operational performance for practical applications.

The domestication of animals has rendered horns less necessary for survival. Moreover, the use of polled and disbudded animals is interesting in order to avoid injuries of animals and handlers, among other advantages. We therefore conducted a comparative economic analysis of different traditional disbudding techniques versus selective breeding for polledness in Nelore cattle, the main beef breed of tropical systems in Brazil. The cost to obtain animals without horns was estimated in three different scenarios: disbudding with hot iron, disbudding with caustic paste, and phenotypic selection for polled animals. Price quotations of the materials were obtained in different states of the country and averaged. An initial frequency of horned animals of 92.16% was obtained based on the records of the Brazilian Association of Zebu Breeders. Selective breeding was found to be the best cost-effective scenario. This result differs from intensive production systems of dairy cattle in which traditional disbudding continues to be the best cost-effective scenario. The main explanation is the lack of difference in the price of Nelore semen from polled and horned bulls. Phenotypic selection for polled animals is the best cost-effective method, and it is in accordance with welfare practices. Care should be taken regarding the intensive use of few polled breeding animals in order to avoid inbreeding depression in other traits.

In humans, variation of the ATP7A gene may cause cranial exostosis, which is similar to \"human horn,\" but the function of the ATP7A gene in sheep is still unknown. Tissue expression patterns and potential functional loci analysis of the ATP7A gene could help understand its function in sheep horn. In this study, we first identified tissue, sex, breed, and species-specific expression of the ATP7A gene in sheep based on the RNA-sequencing (RNA-seq) data. Second, the potential functional sites of the ATP7A gene were analyzed by using the whole genome sequencing (WGS) data of 99 sheep from 10 breeds. Last, the allele-specific expression of the ATP7A gene was explored. Our result showed the ATP7A gene has significantly higher expression in the big horn than in the small horn, and the ATP7A gene has high expression in the horn and skin, suggesting that this gene may be related to the horn. The PCA results show that the region around the ATP7A can distinguish horned and hornless groups to some extent, further indicating that the ATP7A may be related to horns. When compared with other species, we find seven ruminate specific amino acid sites of the ATP7A protein, which can be important to the ruminate horn. By analyzing WGS, we found 6 SNP sites with significant differences in frequency in horned and hornless populations, and most of these variants are present in the intron. But we still find some potential functional sites, including three missenses, three synonymous mutations, and four Indels. Finally, by combining the RNA-seq and WGS functional loci results, we find three mutations that showed allele-specific expression between big and small horns. This study shows that the ATP7A gene in sheep may be related to horn size, and several potential functional sites we identified here can be useful molecular markers for sheep horn breeding.

A cutaneous horn is a rare, hyperkeratotic, projecting lesion that can be mostly found in sun-exposed areas of the skin. The base of the lesions can reveal an underlying malignancy. They can also be associated with several benign or pre-malignant dermatologic conditions. A biopsy of the base of the lesion and histopathological analysis are needed to confirm the diagnosis. Management depends on the underlying disease; however, surgical excision is the preferred treatment method.