With the progression of civilization, the harmony within nature has been disrupted, giving rise to various ecocidal activities that are evident in every spheres of the earth. These activities have had a profound and far-reaching impact on global health. One significant example of this is the presence of fluoride in groundwater exceeding acceptable limits, resulting in the widespread occurrence of \"Fluorosis\" worldwide. It is imperative to mitigate the concentration of fluoride in drinking water to meet safety standards. While various defluoridation techniques exist, they often have drawbacks. Biosorption, being a simple, affordable and eco-friendly method, has gained preference for defluoridation. However, its limited commercialization underscores the pressing need for further research in this domain. This comprehensive review article offers a thorough examination of the defluoridation potential of agro-based adsorbents, encompassing their specific chemical compositions and preparation methods. The review presents an in-depth discussion of the factors influencing fluoride biosorption and conducts a detailed exploration of adsorption isotherm and adsorption kinetic models to gain a comprehensive understanding of the nature of the adsorption process. Furthermore, it evaluates the commercial viability through an assessment of regeneration potential and a cost analysis of these agro-adsorbents, with the aim of facilitating the scalability of the defluoridation process. The elucidation of the adsorption mechanism and recommendations for overcoming challenges in large-scale implementation offer a comprehensive outlook on this eco-friendly and sustainable approach to fluoride removal. In summary, this review article equips readers with a lucid understanding of agro-adsorbents, elucidates their ideal conditions for improved performance, offers a more profound insight into the fluoride biosorption mechanism, and introduces the concept of effective spent adsorbent management.

Drinking water defluoridation has attracted significant attention in the scientific community, from which membrane technology, by exploring thin film nanocomposite (TFN) membranes, has demonstrated a great potential for treating fluoride-contaminated water. This study investigates the development of a TFN membrane by integrating titanium oxide nanosheets (TiO2 NSs) into the polyamide (PA) layer using interfacial polymerization. The characterization results suggest that successfully incorporating TiO2 NSs into the PA layer of the TFN membrane led to a surface with a high negative charge, hydrophilic properties, and a smooth surface at the nanoscale. The TFN membrane, containing 80 ppm of TiO2 NSs, demonstrated a notably high fluoride rejection rate of 98%. The Donnan-steric-pore-model-dielectric-exclusion model was employed to analyze the effect of embedding TiO2 NSs into the PA layer of TFN on membrane properties, including charge density (Xd), the pore radius (rp), and pore dielectric constant (εp). The results indicated that embedding TiO2 NSs increased Xd and decreased the εp by less than the TFC membrane without significantly affecting the rp. The resulting TFN membrane demonstrates promising potential for application in water treatment systems, providing an effective and sustainable solution for fluoride remediation in drinking water.

This study analyzed the effect of China\'s fluorosis prevention and control program, which has been in effect for more than 40 years, and the impact of fluorosis on children\'s health. Relevant research studies were retrieved from the following online databases from the time of their inception to May 2022: PubMed, ScienceDirect, Embase, Cochrane, China National Knowledge Infrastructure, and Wanfang. The Review Manager 5.3 software was used in statistical analyses. This article included seventy studies: Thirty-eight studies reported the effect of improving water quality and reducing fluoride content, the incidence rate of dental fluorosis in children, and the level of urinary fluoride, and thirty-two studies reported the intelligence quotient (IQ) and health status of children. Following water improvement strategies, the fluoride levels in drinking water decreased significantly; urinary fluoride levels and dental fluorosis decreased significantly in children. With regard to the effect of fluorosis on the IQ of children, the results showed that the IQ of children in areas with a high fluoride of fluorosis was lesser than that in areas with a low fluoride, and this difference was significant. Based on the prevalence of dental fluorosis and its effect on the intelligence of children, it appears that reducing fluoride levels in drinking water and monitoring water quality are important strategies for the prevention and treatment of fluorosis.

In the present study, carbon cloth (CC) was functionalized using dimethyl sulfoxide (DMSO) and employed as an excellent bioanode for improving defluoridation efficiency, wastewater treatment, and power output from a microbial desalination cell (MDC). The Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) analysis of DMSO modified carbon cloth (CCDMSO) confirmed the functionalization of CCDMSO, and the water drop contact angle of 0° ensured its superior hydrophilicity. The presence of -COOH (carboxyl), S[bond, double bond]O (sulfoxide) and O-C[bond, double bond]O (carbonyl) functional groups on CCDMSO aids in enhancing the performance of the MDC. Besides, cyclic voltametric and electrochemical impedance analysis revealed that CCDMSO had an excellent electrochemical performance with low charge transfer resistance. Replacing CC with CCDMSO as anode in MDC, the time required for 3,10 and 20 mg/L of initial fluoride (F-) concentrations in the middle chamber was reduced from 24 ± 0.75 to 17 ± 0.37, 72 ± 1 to 48 ± 0.70, and 120 ± 0.5 to 96 ± 0.53 h, respectively to meet the prescribed standards (1.5 mg/L). Furthermore, using CCDMSO, the anode chamber of MDC exhibited a maximum of 83% substrate degradation, and simultaneously, the power output is increased by 2-2.8 times. CCDMSO improved the power production from 0.009 ± 0.003, 1.394 ± 0.06 and 1.423 ± 0.15 mW/m2 to 0.020 ± 0.07, 2.748 ± 0.22 and 3.245 ± 0.16 mW/m2, respectively, for initial F- concentrations of 3,10, and 20 mg/L. Modifying CC with DMSO thus proved to be an efficient and simple methodology for enhancing the overall performance of MDC.

High rates of fluorosis were reported worldwide as a result of human consumption of water with fluoride contents. Adjusting fluoride concentration in water as recommended by the World Health Organization (<1.5 mg L-1) is a concern and it needs to be conducted through inexpensive, but efficient techniques, such as phytoremediation. The application of phytohormones was investigated as a strategy to improve this process. Thus, the main goal of this research was to evaluate the effect of exogenous auxin and gibberellin on the tropical duckweed Eichhornia crassipes performance for fluoride phytoremediation. Definitive screening and central composite rotatable designs were used for experiments where fluoride concentration (5~15 mg L-1), phosphorus concentration (1~10 mg L-1), and pH (5~9) were assessed as well throughout 10 days. Fluoride contents were determined in solution and plant tissues by potentiometry. Higher concentrations of fluoride reflected on greater absorptions by plants, though in relative terms removal efficiencies were quite similar for all treatments (~60%). Auxin and acidic conditions favored fluoride removals per mass of plant. Fluoride accumulated mostly in leaves and auxin probably alleviated toxic effects on E. crassipes while gibberellin showed no effect. Therefore, E. crassipes could be employed as a fluoride accumulator plant for water treatment and exogenous auxin may be used to improve the process.

The need to make clean water accessible and affordable for low-income countries is crucial. This study examines the suitability of various clays for Ceramic Pot Water Filters production and groundwater treatment for effective microbe and fluoride removal. For this study, three clays were collected from different geographical locations in Ethiopia,i.e., Hosaenna Clay, Babawuha Clay, and Leku Clay. Organic additives such as sawdust and eragrostis tef husks were used to increase the porosity of the Ceramic Pot Water Filters. The Atterberg limit and particle size distribution tests revealed that BC and HC have moderate to high plasticity and mouldability, making them suitable for CPWF production. The clay chemical composition, phase analysis, and thermal properties were determined using XRF, XRD, and TGA/DTA. The turbidity, fluoride level, total dissolved solids, and pH of the groundwater decreases, from 13 to 0.45 NTU, from 3.4 to 0.053 mg/100 mL, from 1245 to 360 mg/l, and from 8.4 to 7.3, respectively; all of which are within the acceptable range of WHO drinking water standards. Microbial removal tests show that the CPWFs removed 99.3%-100% of total coliform bacteria and 98.48%-100% of fecal coliform bacteria from groundwater. Therefore, this work paves the way to fabricate a clay-based ceramic water filter for low-income countries to provide affordable household groundwater treatment technology for microbial and excess fluoride removal.

A Gram positive rod shaped bacterium designated as isolate H1 with Fluoride resistance up to 4 g/L sodium fluoride (NaF) in LB (Luria-Bertani) agar was isolated from a ground water sample of Narketpally area, Nalgonda district, Telangana, India. The colonies of isolate H1 were off white in color. Growth patterns of isolate H1 were observed at two different concentrations, 100 and 250 ppm, of NaF and also without NaF in the medium. In cases where NaF was present in the media, the lag phases of the growth curves were extended when compared to the absence of NaF. Optimum pH required for the organism\'s growth was 8. Isolate H1 required a temperature of 37 °C with 150 rpm and 2% NaCl for its optimal growth in the medium without NaF. Meanwhile, isolate H1 could thrive in a diverse pH range, i.e., pH 5-10, and at an NaCl concentration of up to 11% in the medium with NaF. Based on morphological, biochemical and molecular characterization, isolate H1 was identified as belonging to the genus Bacillus. It showed 98.47% 16S rDNA gene sequence similarity with Bacillus australimaris NH71_1T. Isolate H1 showed high fluoride removals of 22.5% and 38.2% with 100 and 250 mg/L of NaF in the LB broth when incubated at pH 8 and a temperature of 37 °C with 150 rpm for 3 day. Hence, this organism could be a promising isolate to apply for defluoridation of ground water in fluoride contaminthe ated areas.

Water containing more than 1.5 mg/L of fluoride is considered toxic as it causes dental, kidney, and other health problems. With the purpose of helping alleviate these problems by exploring a treatment method for fluoride contamination, this study was to assess the suitability of scales of Tilapia Sp. and Sciaenops ocellatus as a cheaper source of adsorbent for the removal of fluoride from drinking water. The samples which were obtained from the Lapaz Market in Accra, Ghana, underwent treatment to eliminate any impurities. They were then ground into powder and treated with aluminum hydroxide [Al(OH)3]. The treated samples were used for the removal of fluoride from spiked solutions prepared in the laboratory. Batch adsorption was performed by varying parameters such as adsorbent dose (1-8 g/L), initial concentration (2 mg/L to 10 mg/L), and contact time (30-300 min) at pH of 7. A one-way ANOVA was used to validate the significance of the defluoridation process with respect to the different experimental conditions. The optimum adsorbent dose, initial concentration, and contact time were found to be 4 g/L, 10 mg/L, and 300 min, respectively. The results revealed that the maximum percentage removal of fluoride was 76% by Tilapia Sp. and 70% by Sciaenops ocellatus at the optimum conditions. This is an indication that both Tilapia Sp. And Sciaenops ocellatus scales are suitable adsorbents for the removal of fluoride from water. The fluoride adsorption kinetics followed the pseudo-second-order model, and the adsorption isotherm fitted the Freundlich Isotherm model better than the Langmuir Isotherm model. The adsorption intensity and adsorption capacity for Tilapia Sp. were 3.484 L/mg and 0.065 mg/g, and that of Sciaenops ocellatus 3.195 L/mg and 0.045 mg/g respectively.

Millions of people across the globe suffer from health issues related to high fluoride levels in drinking water. The purpose of this study was to test modified pumice as an adsorbent for the purification of fluoride-containing waters. The adsorption of fluoride onto zirconium-coated pumice (Zr-Pu) adsorbent was examined in fixed-bed adsorption columns. The coating of zirconium on the surface of VPum was revealed by X-ray diffractometer (XRD), Inductively coupled plasma-optical emission spectroscopy (ICP-EOS), and X-ray fluorescence (XRF) techniques. The degree of surface modification with the enhanced porosity of Zr-Pu was evident from the recorded scanning electron microscope (SEM) micrographs. The Brunauer-Emmett-Teller (BET) analysis confirmed the enhancement of the specific surface area of VPum after modification. The Fourier transform infrared (FTIR) examinations of VPum and Zr-Pu before and after adsorption did not reveal any significant spectrum changes. The pH drift method showed that VPum and Zr-Pu have positive charges at pHPZC lower than 7.3 and 6.5, respectively. Zr-Pu yielded a higher adsorption capacity of 225 mg/kg (2.05 times the adsorption capacity of VPum: 110 mg/kg), at pH = 2 and volumetric flow rate (QO) of 1.25 mL/min. Breakthrough time increases with decreasing pH and flow rate. The experimental adsorption data was well-matched by the Thomas and Adams-Bohart models with correlation coefficients (R2) of ≥ 0.980 (Zr-Pu) and ≥ 0.897 (VPum), confirming that both models are suitable tools to design fixed-bed column systems using volcanic rock materials. Overall, coating pumice with zirconium improved the defluoridation capacity of pumice; hence, a Zr-Pu-packed fixed-bed can be applied for defluoridation of excess fluoride from groundwater. However, additional investigations on, for instance, the influences of competing ions are advisable to draw explicit conclusions.

This research investigated the high content of iron-based materials from recycled electro-coagulated (EC) sludge for the adsorptive removal of fluoride, and the properties of the material were characterized. The thermal activation of EC sludge in which the unwanted impurity was removed by beneficiation and thermally activated at 500 °C, and was used for fluoride removal. Basic operating parameters (mixing time, adsorbent dosage, adsorbate concentration, solution pH, and temperature) were examined to evaluate the optimum de-fluoridation capacity (DC). The functional groups, the crystalline structure, and surface morphology of thermally treated and raw EC sludge were analyzed using FTIR, XRD, and SEM, respectively, and demonstrates that thermally activated EC sludge contains significant content of magnetite and hematite. The optimum DC was recorded as 5.12 mg of F-/gm with experimental conditions: mixing time = 20 min, adsorbent dosage = 0.3 gm/100 ml, initial fluoride concentration = 1 mg/L, and pH = 5 at the temperature of 353 K. The Langmuir isotherm model was fitted, and the capacity is calculated as 6.43 mg/g. The adsorption process follows the Pseudo-Second-order kinetic models. It can be concluded that the prepared adsorbents have excellent fluoride removal capacity, and EC sludge can be used as an alternative adsorbent for de-fluoridation.