We report complete coding sequences of Orthohantavirus dobravaense (Dobrava virus) Igneada strains and phylogenetic characterization of all available complete coding sequences. Our analyses suggested separation of host-dependent lineages, followed by geographic clustering. Surveillance of orthohantaviruses using complete genomes would be useful for assessing public health threats from Dobrava virus.

The nature in which the coronavirus disease 2019 (COVID-19) pandemic started and spread all over the world has surprised and shocked experts and the general population alike. This has brought out a worldwide desire and serious efforts to prevent, or at least reduce, the severity of another airborne viral infection and protect individuals gathering for various reasons. Toward this main purpose, a novel method to disinfect the air, using graded, predictable, safe, and reliable dosage of ultraviolet C (UVC), with specially designed devices, is described here. Individuals exclusively breathing this disinfected air can prevent infection, thus destroying the airborne virus or any other pathogens outside the human body to prevent acute and chronic damage to the organs and provide a sense of security to congregate, use public transport, and be protected in acute and long-term healthcare facilities. The study involved designing and testing a unit with one UVC chamber and another unit with six UVC chambers both enclosed in UVC-opaque housings that could be used to destroy airborne pathogens. Wild-type severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was used as a representative pathogen. The virus was fed into these units and in both units, the virus was destroyed to undetectable levels. Such disinfected air can be made available for individuals to breathe at an individual and a community level. The two units that were studied were able to destroy the SARS-CoV-2 virus completely in UVC-opaque housings, making them safe for human use. By employing the air to bring the virus to the UVC, the problem of the virus getting protected behind structures was avoided. The individuals get to breathe totally disinfected air through a mask or a ventilator. To protect individuals who are unable or unwilling to use these units meant for individual use, the same principle can be expanded for use with air conditioners to provide community protection. It is envisaged that this method can prevent airborne infections from turning into pandemics and is a clear example of advocating prevention, rather than treatment. These units are expandable and the UVC dosage to the pathogen can be adjusted and predictable, thereby making it a standard technique to study the dosage needed to inactivate different pathogens.

SARS-CoV-2 is inactivated in aerosol (its primary mode of transmission) by means of radiated microwaves at frequencies that have been experimentally determined. Such frequencies are best predicted by the mathematical model suggested by Taylor, Margueritat and Saviot. The alignment between such mathematical prediction and the outcomes of our experiments serves to reinforce the efficacy of the radiated microwave technology and its promise in mitigating the transmission of SARS-CoV-2 in its naturally airborne state.

Coronaviruses are a family of viruses that cause disease in mammals and birds. In humans, coronaviruses cause infections on the respiratory tract that can be fatal. These viruses can cause both mild illnesses such as the common cold and lethal illnesses such as SARS, MERS, and COVID-19. Air transmission represents the principal mode by which people become infected by SARS-CoV-2. To reduce the risks of air transmission of this powerful pathogen, we devised a method of inactivation based on the propagation of electromagnetic waves in the area to be sanitized. We optimized the conditions in a controlled laboratory environment mimicking a natural airborne virus transmission and consistently achieved a 90% (tenfold) reduction of infectivity after a short treatment using a Radio Frequency (RF) wave emission with a power level that is safe for people according to most regulatory agencies, including those in Europe, USA, and Japan. To the best of our knowledge, this is the first time that SARS-CoV-2 has been shown to be inactivated through RF wave emission under conditions compatible with the presence of human beings and animals. Additional in-depth studies are warranted to extend the results to other viruses and to explore the potential implementation of this technology in different environmental conditions.

Winter in the northern hemisphere is characterized by the circulation of influenza viruses, which cause seasonal epidemics, generally from October to April. Each influenza season has its own pattern, which differs from one year to the next in terms of the first influenza case notification, the period of highest incidence, and the predominant influenza virus subtypes. After the total absence of influenza viruses in the 2020/2021 season, cases of influenza were again recorded in the 2021/2022 season, although they remained below the seasonal average. Moreover, the co-circulation of the influenza virus and the SARS-CoV-2 pandemic virus was also reported. In the context of the DRIVE study, oropharyngeal swabs were collected from 129 Tuscan adults hospitalized for severe acute respiratory infection (SARI) and analyzed by means of real-time polymerase chain reaction (RT-PCR) for SARS-CoV-2 and 21 different airborne pathogens, including influenza viruses. In total, 55 subjects tested positive for COVID-19, 9 tested positive for influenza, and 3 tested positive for both SARS-CoV-2 and the A/H3N2 influenza virus. The co-circulation of different viruses in the population requires strengthened surveillance that is no longer restricted to the winter months. Indeed, constant, year-long monitoring of the trends of these viruses is needed, especially in at-risk groups and elderly people.

Aerosolized anthrax (Bacillus anthracis) spores are of extreme health concern and can remain airborne for hours and contaminate all kinds of surfaces, constituting reservoirs from which resuspension is easily produced. The assessment of decontamination techniques must therefore consider both air and surfaces. In the present study, several kinds of disinfecting fogs were experimentally tested against Bacillus thuringiensis spores, which served as a surrogate for Bacillus anthracis, both as aerosols released into the air and spread on porous and non-porous surfaces with different positions and orientations. This technology removed Bacillus thuringiensis spores from the air in 20 min with just a 1 min application of fog. The dynamics and characteristics of the fog, related to aerosol and surface interactions, proved to be critical for optimal performance and decontamination. An optimal configuration could provide effective disinfection even on indirectly reached surfaces. In all cases, 8% hydrogen peroxide (H2O2) provided a higher disinfection rate than 2% glutaraldehyde.

As the recent coronavirus disease (COVID-19) pandemic and several severe illnesses such as Middle East respiratory syndrome coronavirus (MERS-CoV), Influenza A virus (IAV) flu, and severe acute respiratory syndrome (SARS) have been found to be airborne, the importance of monitoring bioaerosols for the control and prevention of airborne epidemic diseases outbreaks is increasing. However, current aerosol collection and detection technologies may be limited to on-field use for real-time monitoring because of the relatively low concentrations of targeted bioaerosols in air samples. Microfluidic devices have been used as lab-on-a-chip platforms and exhibit outstanding capabilities in airborne particulate collection, sample processing, and target molecule analysis, thereby highlighting their potential for on-site bioaerosol monitoring. This review discusses the measurement of airborne microorganisms from air samples, including sources and transmission of bioaerosols, sampling strategies, and analytical methodologies. Recent advancements in microfluidic platforms have focused on bioaerosol sample preparation strategies, such as sorting, concentrating, and extracting, as well as rapid and field-deployable detection methods for analytes on microfluidic chips. Furthermore, we discuss an integrated platform for on-site bioaerosol analyses. We believe that our review significantly contributes to the literature as it assists in bridging the knowledge gaps in bioaerosol monitoring using microfluidic platforms.

In this work, we developed an integrated simulation framework for pandemic prevention and mitigation of pandemics caused by airborne pathogens, incorporating three sub-models, namely the spatial model, the mobility model, and the propagation model, to create a realistic simulation environment for the evaluation of the effectiveness of different countermeasures on the epidemic dynamics. The spatial model converts images of real cities obtained from Google Maps into undirected weighted graphs that capture the spatial arrangement of the streets utilized next for the mobility of individuals. The mobility model implements a stochastic agent-based approach, developed to assign specific routes to individuals moving in the city, through the use of stochastic processes, utilizing the weights of the underlying graph to deploy shortest path algorithms. The propagation model implements both the epidemiological model and the physical substance of the transmission of an airborne pathogen (in our approach, we investigate the transmission parameters of SARS-CoV-2). The deployment of a set of countermeasures was investigated in reducing the spread of the pathogen, where, through a series of repetitive simulation experiments, we evaluated the effectiveness of each countermeasure in pandemic prevention.

Airborne severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was detected in a coronavirus disease 19 (COVID-19) ward before activation of HEPA-air filtration but not during filter operation; SARS-CoV-2 was again detected following filter deactivation. Airborne SARS-CoV-2 was infrequently detected in a COVID-19 intensive care unit. Bioaerosol was also effectively filtered.

The critical risk from airborne infectious diseases, bio-weapons, and harmful bacteria is currently the highest it has ever been in human history. The requirement for monitoring airborne pathogens has gradually increased to defend against bioterrorism or prevent pandemics, especially via simple and low-cost platforms which can be applied in resource-limited settings. Here, we developed a paper-based airborne bacteria collection and DNA extraction kit suitable for simple application with minimal instruments. Airborne sample collection and DNA extraction for PCR analysis were integrated in the paper kit. We created an easy-to-use paper-based air monitoring system using 3D printing technology combined with an air pump. The operation time of the entire process, comprising air sampling, bacterial cell lysis, purification and concentration of DNA, and elution of the DNA analyte, was within 20 min. All the investigations and optimum settings were tested in a custom-designed closed cabinet system. In the fabricated cabinet system, the paper kit operated effectively at a temperature of 25-35 °C and 30-70% relative humidity for air containing 10-106 CFU Staphylococcus aureus. This paper kit could be applied for simple, rapid, and cost-effective airborne pathogen monitoring.